jacob.eva/RNode_Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #61 from jacobeva/ble

Browse Source 
Add NRF52 BLE serial support
This commit is contained in:
markqvist 2024-02-10 17:15:02 +01:00 committed by GitHub
commit 5a87095e30
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
8 changed files with 220 additions and 545 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

154
Bluetooth.h
View File

@ -13,11 +13,24 @@
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <https://www.gnu.org/licenses/>.
#if MCU_VARIANT == MCU_ESP32
#include "BluetoothSerial.h"
#include "esp_bt_main.h"
#include "esp_bt_device.h"
#elif MCU_VARIANT == MCU_NRF52
#include <bluefruit.h>
#include <math.h>
#endif
#if MCU_VARIANT == MCU_ESP32
BluetoothSerial SerialBT;
#elif MCU_VARIANT == MCU_NRF52
BLEUart SerialBT;
BLEDis bledis;
BLEBas blebas;
#endif
#define BT_PAIRING_TIMEOUT 35000
uint32_t bt_pairing_started = 0;
@ -138,4 +151,145 @@ char bt_devname[11];
}
}
#elif MCU_VARIANT == MCU_NRF52
uint8_t eeprom_read(uint32_t mapped_addr);
void bt_stop() {
if (bt_state != BT_STATE_OFF) {
bt_allow_pairing = false;
bt_state = BT_STATE_OFF;
}
}
void bt_disable_pairing() {
bt_allow_pairing = false;
bt_ssp_pin = 0;
bt_state = BT_STATE_ON;
}
void bt_pairing_complete(uint16_t conn_handle, uint8_t auth_status) {
if (auth_status == BLE_GAP_SEC_STATUS_SUCCESS) {
bt_disable_pairing();
} else {
bt_ssp_pin = 0;
}
}
bool bt_passkey_callback(uint16_t conn_handle, uint8_t const passkey[6], bool match_request) {
for (int i = 0; i < 6; i++) {
// multiply by tens however many times needed to make numbers appear in order
bt_ssp_pin += ((int)passkey[i] - 48) * pow(10, 5-i);
}
kiss_indicate_btpin();
if (match_request) {
if (bt_allow_pairing) {
return true;
}
}
return false;
}
void bt_connect_callback(uint16_t conn_handle) {
bt_state = BT_STATE_CONNECTED;
cable_state = CABLE_STATE_DISCONNECTED;
}
void bt_disconnect_callback(uint16_t conn_handle, uint8_t reason) {
bt_state = BT_STATE_ON;
}
bool bt_setup_hw() {
if (!bt_ready) {
#if HAS_EEPROM
if (EEPROM.read(eeprom_addr(ADDR_CONF_BT)) == BT_ENABLE_BYTE) {
#else
if (eeprom_read(eeprom_addr(ADDR_CONF_BT)) == BT_ENABLE_BYTE) {
#endif
bt_enabled = true;
} else {
bt_enabled = false;
}
Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
Bluefruit.autoConnLed(false);
if (Bluefruit.begin()) {
Bluefruit.setTxPower(4); // Check bluefruit.h for supported values
Bluefruit.Security.setIOCaps(true, true, false);
Bluefruit.Security.setPairPasskeyCallback(bt_passkey_callback);
Bluefruit.Periph.setConnectCallback(bt_connect_callback);
Bluefruit.Periph.setDisconnectCallback(bt_disconnect_callback);
Bluefruit.Security.setIOCaps(true, true, false);
Bluefruit.Security.setPairCompleteCallback(bt_pairing_complete);
const ble_gap_addr_t gap_addr = Bluefruit.getAddr();
char *data = (char*)malloc(BT_DEV_ADDR_LEN+1);
for (int i = 0; i < BT_DEV_ADDR_LEN; i++) {
data[i] = gap_addr.addr[i];
}
#if HAS_EEPROM
data[BT_DEV_ADDR_LEN] = EEPROM.read(eeprom_addr(ADDR_SIGNATURE));
#else
data[BT_DEV_ADDR_LEN] = eeprom_read(eeprom_addr(ADDR_SIGNATURE));
#endif
unsigned char *hash = MD5::make_hash(data, BT_DEV_ADDR_LEN);
memcpy(bt_dh, hash, BT_DEV_HASH_LEN);
sprintf(bt_devname, "RNode %02X%02X", bt_dh[14], bt_dh[15]);
free(data);
bt_ready = true;
return true;
} else { return false; }
} else { return false; }
}
void bt_start() {
if (bt_state == BT_STATE_OFF) {
Bluefruit.setName(bt_devname);
bledis.setManufacturer("Adafruit Industries");
bledis.setModel("Bluefruit Feather52");
// start device information service
bledis.begin();
SerialBT.begin();
blebas.begin();
// non-connectable advertising
Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
Bluefruit.Advertising.addTxPower();
// Include bleuart 128-bit uuid
Bluefruit.Advertising.addService(SerialBT);
// There is no room for Name in Advertising packet
// Use Scan response for Name
Bluefruit.ScanResponse.addName();
Bluefruit.Advertising.start(0);
bt_state = BT_STATE_ON;
}
}
bool bt_init() {
bt_state = BT_STATE_OFF;
if (bt_setup_hw()) {
if (bt_enabled && !console_active) bt_start();
return true;
} else {
return false;
}
}
void bt_enable_pairing() {
if (bt_state == BT_STATE_OFF) bt_start();
bt_allow_pairing = true;
bt_pairing_started = millis();
bt_state = BT_STATE_PAIRING;
}
void update_bt() {
if (bt_allow_pairing && millis()-bt_pairing_started >= BT_PAIRING_TIMEOUT) {
bt_disable_pairing();
}
}
#endif

7
Config.h
View File

@ -313,7 +313,7 @@
#if BOARD_MODEL == BOARD_RAK4630
#define HAS_EEPROM false
#define HAS_DISPLAY false // set for debugging
#define HAS_BLUETOOTH false
#define HAS_BLUETOOTH true
#define HAS_CONSOLE false
#define HAS_PMU false
#define HAS_NP false
@ -324,8 +324,9 @@
#define CONFIG_UART_BUFFER_SIZE 6144
#define CONFIG_QUEUE_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
#define EEPROM_SIZE 4096
#define EEPROM_OFFSET EEPROM_SIZE+0xED000-EEPROM_RESERVED
#define EEPROM_SIZE 200
//#define EEPROM_OFFSET EEPROM_SIZE+0xED000-EEPROM_RESERVED
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
// following pins are for the sx1262
const int pin_rxen = 37;

8
RNode_Firmware.ino
View File

@ -54,6 +54,12 @@ void setup() {
Serial.setRxBufferSize(CONFIG_UART_BUFFER_SIZE);
#endif
#if MCU_VARIANT == MCU_NRF52
if (!eeprom_begin()) {
Serial.write("EEPROM initialisation failed.\r\n");
}
#endif
// Seed the PRNG
randomSeed(analogRead(0));
@ -140,7 +146,7 @@ void setup() {
update_display();
#endif
#if MCU_VARIANT == MCU_ESP32
#if MCU_VARIANT == MCU_ESP32 || MCU_VARIANT == MCU_NRF52
#if HAS_PMU == true
pmu_ready = init_pmu();
#endif

66
Utilities.h
View File

@ -18,8 +18,13 @@
#if HAS_EEPROM
#include <EEPROM.h>
#elif PLATFORM == PLATFORM_NRF52
#include "flash_nrf5x.h"
int written_bytes = 0;
#include <Adafruit_LittleFS.h>
#include <InternalFileSystem.h>
using namespace Adafruit_LittleFS_Namespace;
#define EEPROM_FILE "eeprom"
bool file_exists = false;
int written_bytes = 4;
File file(InternalFS);
#endif
#include <stddef.h>
@ -1104,10 +1109,33 @@ void promisc_disable() {
}
#if !HAS_EEPROM && MCU_VARIANT == MCU_NRF52
bool eeprom_begin() {
InternalFS.begin();
file.open(EEPROM_FILE, FILE_O_READ);
// if file doesn't exist
if (!file) {
if (file.open(EEPROM_FILE, FILE_O_WRITE)) {
// initialise the file with empty content
uint8_t empty_content[EEPROM_SIZE] = {0};
file.write(empty_content, EEPROM_SIZE);
return true;
} else {
return false;
}
} else {
file.close();
file.open(EEPROM_FILE, FILE_O_WRITE);
return true;
}
}
uint8_t eeprom_read(uint32_t mapped_addr) {
uint8_t byte;
void* byte_ptr = &byte;
flash_nrf5x_read(byte_ptr, mapped_addr, 1);
file.seek(mapped_addr);
file.read(byte_ptr, 1);
return byte;
}
#endif
@ -1176,23 +1204,31 @@ void eeprom_update(int mapped_addr, uint8_t byte) {
#elif !HAS_EEPROM && MCU_VARIANT == MCU_NRF52
uint8_t read_byte;
void* read_byte_ptr = &read_byte;
void const * byte_ptr = &byte;
flash_nrf5x_read(read_byte_ptr, mapped_addr, 1);
file.seek(mapped_addr);
file.read(read_byte_ptr, 1);
file.seek(mapped_addr);
if (read_byte != byte) {
flash_nrf5x_write(mapped_addr, byte_ptr, 1);
file.write(byte);
}
written_bytes++;
// flush the cache every 4 bytes to make sure everything is synced
if (written_bytes == 4) {
if (written_bytes >= 8) {
file.close();
file.open(EEPROM_FILE, FILE_O_WRITE);
written_bytes = 0;
flash_nrf5x_flush();
}
#endif
}
#if !HAS_EEPROM && MCU_VARIANT == MCU_NRF52
void eeprom_flush() {
// sync file contents to flash
file.close();
file.open(EEPROM_FILE, FILE_O_WRITE);
written_bytes = 0;
}
#endif
void eeprom_write(uint8_t addr, uint8_t byte) {
if (!eeprom_info_locked() && addr >= 0 && addr < EEPROM_RESERVED) {
eeprom_update(eeprom_addr(addr), byte);
@ -1329,8 +1365,16 @@ bool eeprom_checksum_valid() {
void bt_conf_save(bool is_enabled) {
if (is_enabled) {
eeprom_update(eeprom_addr(ADDR_CONF_BT), BT_ENABLE_BYTE);
#if !HAS_EEPROM && MCU_VARIANT == MCU_NRF52
// have to do a flush because we're only writing 1 byte and it syncs after 8
eeprom_flush();
#endif
} else {
eeprom_update(eeprom_addr(ADDR_CONF_BT), 0x00);
#if !HAS_EEPROM && MCU_VARIANT == MCU_NRF52
// have to do a flush because we're only writing 1 byte and it syncs after 8
eeprom_flush();
#endif
}
}

204
flash_cache.c
View File

@ -1,204 +0,0 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2019 Ha Thach for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifdef NRF52840_XXAA
#include <string.h>
#include "flash_cache.h"
#include "common_func.h"
#include "variant.h"
#include "wiring_digital.h"
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM DECLARATION
//--------------------------------------------------------------------+
static inline uint32_t page_addr_of (uint32_t addr)
{
return addr & ~(FLASH_CACHE_SIZE - 1);
}
static inline uint32_t page_offset_of (uint32_t addr)
{
return addr & (FLASH_CACHE_SIZE - 1);
}
int flash_cache_write (flash_cache_t* fc, uint32_t dst, void const * src, uint32_t len)
{
uint8_t const * src8 = (uint8_t const *) src;
uint32_t remain = len;
// Program up to page boundary each loop
while ( remain )
{
uint32_t const page_addr = page_addr_of(dst);
uint32_t const offset = page_offset_of(dst);
uint32_t wr_bytes = FLASH_CACHE_SIZE - offset;
wr_bytes = min32(remain, wr_bytes);
// Page changes, flush old and update new cache
if ( page_addr != fc->cache_addr )
{
flash_cache_flush(fc);
fc->cache_addr = page_addr;
// read a whole page from flash
fc->read(fc->cache_buf, page_addr, FLASH_CACHE_SIZE);
}
memcpy(fc->cache_buf + offset, src8, wr_bytes);
// adjust for next run
src8 += wr_bytes;
remain -= wr_bytes;
dst += wr_bytes;
}
return len - remain;
}
void flash_cache_flush (flash_cache_t* fc)
{
if ( fc->cache_addr == FLASH_CACHE_INVALID_ADDR ) return;
// skip erase & program if verify() exists, and memory matches
if ( !(fc->verify && fc->verify(fc->cache_addr, fc->cache_buf, FLASH_CACHE_SIZE)) )
{
// indicator TODO allow to disable flash indicator
ledOn(LED_BUILTIN);
fc->erase(fc->cache_addr);
fc->program(fc->cache_addr, fc->cache_buf, FLASH_CACHE_SIZE);
ledOff(LED_BUILTIN);
}
fc->cache_addr = FLASH_CACHE_INVALID_ADDR;
}
int flash_cache_read (flash_cache_t* fc, void* dst, uint32_t addr, uint32_t count)
{
// there is no check for overflow / wraparound for dst + count, addr + count.
// this might be a useful thing to add for at least debug builds.
// overwrite with cache value if available
if ( (fc->cache_addr != FLASH_CACHE_INVALID_ADDR) && // cache is not valid
!(addr < fc->cache_addr && addr + count <= fc->cache_addr) && // starts before, ends before cache area
!(addr >= fc->cache_addr + FLASH_CACHE_SIZE) ) // starts after end of cache area
{
// This block is entered only when the read overlaps the cache area by at least one byte.
// If the read starts before the cache area, it's further guaranteed
// that count is large enough to cause the read to enter
// the cache area by at least 1 byte.
uint32_t dst_off = 0;
uint32_t src_off = 0;
if (addr < fc->cache_addr)
{
dst_off = fc->cache_addr - addr;
// Read the bytes prior to the cache address
fc->read(dst, addr, dst_off);
}
else
{
src_off = addr - fc->cache_addr;
}
// Thus, after the above code block executes:
// *** AT MOST ***, only one of src_off and dst_off are non-zero;
// (Both may be zero when the read starts at the start of the cache area.)
// dst_off corresponds to the number of bytes already read from PRIOR to the cache area.
// src_off corresponds to the byte offset to start reading at, from WITHIN the cache area.
// How many bytes to memcpy from flash area?
// Remember that, AT MOST, one of src_off and dst_off are non-zero.
// If src_off is non-zero, then dst_off is zero, representing that the
// read starts inside the cache. In this case:
// PARAM1 := FLASH_CACHE_SIZE - src_off == maximum possible bytes to read from cache
// PARAM2 := count
// Thus, taking the minimum of the two gives the number of bytes to read from cache,
// in the range [ 1 .. FLASH_CACHE_SIZE-src_off ].
// Else if dst_off is non-zero, then src_off is zero, representing that the
// read started prior to the cache area. In this case:
// PARAM1 := FLASH_CACHE_SIZE == full size of the cache
// PARAM2 := count - dst_off == total bytes requested, minus the count of those already read
// Because the original request is guaranteed to overlap the cache, the range for
// PARAM2 is ensured to be [ 1 .. count-1 ].
// Thus, taking the minimum of the two gives the number of bytes to read from cache,
// in the range [ 1 .. FLASH_CACHE_SIZE ]
// Else both src_off and dst_off are zero, representing that the read is starting
// exactly aligned to the cache.
// PARAM1 := FLASH_CACHE_SIZE
// PARAM2 := count
// Thus, taking the minimum of the two gives the number of bytes to read from cache,
// in the range [ 1 .. FLASH_CACHE_SIZE ]
//
// Therefore, in all cases, there is assurance that cache_bytes
// will be in the final range [1..FLASH_CACHE_SIZE].
uint32_t cache_bytes = minof(FLASH_CACHE_SIZE-src_off, count - dst_off);
// Use memcpy to read cached data into the buffer
// If src_off is non-zero, then dst_off is zero, representing that the
// read starts inside the cache. In this case:
// PARAM1 := dst
// PARAM2 := fc->cache_buf + src_off
// PARAM3 := cache_bytes
// Thus, all works as expected when starting in the midst of the cache.
// Else if dst_off is non-zero, then src_off is zero, representing that the
// read started prior to the cache. In this case:
// PARAM1 := dst + dst_off == destination offset by number of bytes already read
// PARAM2 := fc->cache_buf
// PARAM3 := cache_bytes
// Thus, all works as expected when starting prior to the cache.
// Else both src_off and dst_off are zero, representing that the read is starting
// exactly aligned to the cache.
// PARAM1 := dst
// PARAM2 := fc->cache_buf
// PARAM3 := cache_bytes
// Thus, all works as expected when starting exactly at the cache boundary
//
// Therefore, in all cases, there is assurance that cache_bytes
// will be in the final range [1..FLASH_CACHE_SIZE].
memcpy(dst + dst_off, fc->cache_buf + src_off, cache_bytes);
// Read any final bytes from flash
// As noted above, dst_off represents the count of bytes read prior to the cache
// while cache_bytes represents the count of bytes read from the cache;
// This code block is guaranteed to overlap the cache area by at least one byte.
// Thus, copied will correspond to the total bytes already copied,
// and is guaranteed to be in the range [ 1 .. count ].
uint32_t copied = dst_off + cache_bytes;
//
if ( copied < count )
{
fc->read(dst + copied, addr + copied, count - copied);
}
}
else
{
// not using the cache, so just forward to read from flash
fc->read(dst, addr, count);
}
return (int) count;
}
#endif

58
flash_cache.h
View File

@ -1,58 +0,0 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2019 Ha Thach for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifdef NRF52840_XXAA
#ifndef FLASH_CACHE_H_
#define FLASH_CACHE_H_
#include <stdint.h>
#include <stdbool.h>
#define FLASH_CACHE_SIZE 4096 // must be a erasable page size
#define FLASH_CACHE_INVALID_ADDR 0xffffffff
typedef struct
{
bool (*erase) (uint32_t addr);
uint32_t (*program) (uint32_t dst, void const * src, uint32_t len);
uint32_t (*read) (void* dst, uint32_t src, uint32_t len);
bool (*verify) (uint32_t addr, void const * buf, uint32_t len);
uint32_t cache_addr;
uint8_t* cache_buf;
} flash_cache_t;
#ifdef __cplusplus
extern "C" {
#endif
int flash_cache_write (flash_cache_t* fc, uint32_t dst, void const *src, uint32_t count);
void flash_cache_flush (flash_cache_t* fc);
int flash_cache_read (flash_cache_t* fc, void* dst, uint32_t addr, uint32_t count);
#ifdef __cplusplus
}
#endif
#endif /* FLASH_CACHE_H_ */
#endif

179
flash_nrf5x.c
View File

@ -1,179 +0,0 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2019 Ha Thach for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifdef NRF52840_XXAA
#include "flash_nrf5x.h"
#include "flash_cache.h"
#include "nrf_sdm.h"
#include "nrf_soc.h"
#include "delay.h"
#include "rtos.h"
#ifdef NRF52840_XXAA
#define BOOTLOADER_ADDR 0xF4000
#else
#define BOOTLOADER_ADDR 0x74000
#endif
// defined in linker script
extern uint32_t __flash_arduino_start[];
//extern uint32_t __flash_arduino_end[];
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM DECLARATION
//--------------------------------------------------------------------+
static SemaphoreHandle_t _sem = NULL;
void flash_nrf5x_event_cb (uint32_t event)
{
// if (event != NRF_EVT_FLASH_OPERATION_SUCCESS) LOG_LV1("IFLASH", "Flash op Failed");
if ( _sem ) xSemaphoreGive(_sem);
}
// Flash Abstraction Layer
static bool fal_erase (uint32_t addr);
static uint32_t fal_program (uint32_t dst, void const * src, uint32_t len);
static uint32_t fal_read (void* dst, uint32_t src, uint32_t len);
static bool fal_verify (uint32_t addr, void const * buf, uint32_t len);
static uint8_t _cache_buffer[FLASH_CACHE_SIZE] __attribute__((aligned(4)));
static flash_cache_t _cache =
{
.erase = fal_erase,
.program = fal_program,
.read = fal_read,
.verify = fal_verify,
.cache_addr = FLASH_CACHE_INVALID_ADDR,
.cache_buf = _cache_buffer
};
//--------------------------------------------------------------------+
// Application API
//--------------------------------------------------------------------+
void flash_nrf5x_flush (void)
{
flash_cache_flush(&_cache);
}
int flash_nrf5x_write (uint32_t dst, void const * src, uint32_t len)
{
// Softdevice region
VERIFY(dst >= ((uint32_t) __flash_arduino_start), -1);
// Bootloader region
VERIFY(dst < BOOTLOADER_ADDR, -1);
return flash_cache_write(&_cache, dst, src, len);
}
int flash_nrf5x_read (void* dst, uint32_t src, uint32_t len)
{
return flash_cache_read(&_cache, dst, src, len);
}
bool flash_nrf5x_erase(uint32_t addr)
{
return fal_erase(addr);
}
//--------------------------------------------------------------------+
// HAL for caching
//--------------------------------------------------------------------+
static bool fal_erase (uint32_t addr)
{
// Init semaphore for first call
if ( _sem == NULL )
{
_sem = xSemaphoreCreateCounting(10, 0);
VERIFY(_sem);
}
// retry if busy
uint32_t err;
while ( NRF_ERROR_BUSY == (err = sd_flash_page_erase(addr / FLASH_NRF52_PAGE_SIZE)) )
{
delay(1);
}
VERIFY_STATUS(err, false);
// wait for async event if SD is enabled
uint8_t sd_en = 0;
(void) sd_softdevice_is_enabled(&sd_en);
if ( sd_en ) xSemaphoreTake(_sem, portMAX_DELAY);
return true;
}
static uint32_t fal_program (uint32_t dst, void const * src, uint32_t len)
{
// wait for async event if SD is enabled
uint8_t sd_en = 0;
(void) sd_softdevice_is_enabled(&sd_en);
uint32_t err;
// Somehow S140 v6.1.1 assert an error when writing a whole page
// https://devzone.nordicsemi.com/f/nordic-q-a/40088/sd_flash_write-cause-nrf_fault_id_sd_assert
// Workaround: write half page at a time.
#if NRF52832_XXAA
while ( NRF_ERROR_BUSY == (err = sd_flash_write((uint32_t*) dst, (uint32_t const *) src, len/4)) )
{
delay(1);
}
VERIFY_STATUS(err, 0);
if ( sd_en ) xSemaphoreTake(_sem, portMAX_DELAY);
#else
while ( NRF_ERROR_BUSY == (err = sd_flash_write((uint32_t*) dst, (uint32_t const *) src, len/8)) )
{
delay(1);
}
VERIFY_STATUS(err, 0);
if ( sd_en ) xSemaphoreTake(_sem, portMAX_DELAY);
while ( NRF_ERROR_BUSY == (err = sd_flash_write((uint32_t*) (dst+ len/2), (uint32_t const *) (src + len/2), len/8)) )
{
delay(1);
}
VERIFY_STATUS(err, 0);
if ( sd_en ) xSemaphoreTake(_sem, portMAX_DELAY);
#endif
return len;
}
static uint32_t fal_read (void* dst, uint32_t src, uint32_t len)
{
memcpy(dst, (void*) src, len);
return len;
}
static bool fal_verify (uint32_t addr, void const * buf, uint32_t len)
{
return 0 == memcmp((void*) addr, buf, len);
}
#endif

89
flash_nrf5x.h
View File

@ -1,89 +0,0 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2019 Ha Thach for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifdef NRF52840_XXAA
#ifndef FLASH_NRF52_H_
#define FLASH_NRF52_H_
#include "common_inc.h"
#define FLASH_NRF52_PAGE_SIZE 4096
#ifdef __cplusplus
extern "C" {
#endif
void flash_nrf5x_flush (void);
bool flash_nrf5x_erase(uint32_t addr);
int flash_nrf5x_write (uint32_t dst, void const * src, uint32_t len);
int flash_nrf5x_read (void* dst, uint32_t src, uint32_t len);
//--------------------------------------------------------------------+
// Write helper
//--------------------------------------------------------------------+
static inline int flash_nrf5x_write8 (uint32_t dst, uint8_t num)
{
return flash_nrf5x_write(dst, &num, sizeof(num));
}
static inline int flash_nrf5x_write16 (uint32_t dst, uint8_t num)
{
return flash_nrf5x_write(dst, &num, sizeof(num));
}
static inline int flash_nrf5x_write32 (uint32_t dst, uint8_t num)
{
return flash_nrf5x_write(dst, &num, sizeof(num));
}
//--------------------------------------------------------------------+
// Read helper
//--------------------------------------------------------------------+
static inline uint8_t flash_nrf5x_read8 (uint32_t src)
{
uint8_t num;
flash_nrf5x_read(&num, src, sizeof(num));
return num;
}
static inline uint16_t flash_nrf5x_read16 (uint32_t src)
{
uint16_t num;
flash_nrf5x_read(&num, src, sizeof(num));
return num;
}
static inline uint16_t flash_nrf5x_read32 (uint32_t src)
{
uint32_t num;
flash_nrf5x_read(&num, src, sizeof(num));
return num;
}
#ifdef __cplusplus
}
#endif
#endif /* FLASH_NRF52_H_ */
#endif