From 72d934cf542ae609020d9a4f442407f62f492d09 Mon Sep 17 00:00:00 2001 From: Mark Qvist Date: Sun, 15 Jan 2023 10:06:17 +0100 Subject: [PATCH] Updated readme --- README.md | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) diff --git a/README.md b/README.md index eb3004e..e9f0259 100644 --- a/README.md +++ b/README.md @@ -61,6 +61,25 @@ The RNode system has been designed to allow reliable systems for basic human com While **speeds are lower** than WiFi, typical communication **ranges are many times higher**. Several kilometers can be acheived with usable bitrates, even in urban areas, and over **100 kilometers** can be achieved in line-of-sight conditions. +## Supported Boards & Devices +The RNode Firmware supports the following boards: + +- Handheld v2.x RNodes from [unsigned.io](https://unsigned.io/shop/product/handheld-rnode) +- Original v1.x RNodes from [unsigned.io](https://unsigned.io/shop/product/rnode) +- LilyGO T-Beam v1.1 devices +- LilyGO LoRa32 v2.0 devices +- LilyGO LoRa32 v2.1 devices +- Heltec LoRa32 v2 devices +- Homebrew RNodes based on ATmega1284p boards +- Homebrew RNodes based on ATmega2560 boards +- Homebrew RNodes based on Adafruit Feather ESP32 boards +- Homebrew RNodes based on generic ESP32 boards + +## Supported Transceiver Modules +The RNode Firmware supports all transceiver modules based on **Semtech SX1276** or **Semtech SX1278** chips, that have an **SPI interface** and expose the **DIO_0** interrupt pin from the chip. + +Support for **SX1262**, **SX1268** and **SX1280** is being implemented. Please support the project with donations if you want this faster! + ## Getting Started Fast You can download and flash the firmware to all the supported boards using the [RNode Config Utility](https://github.com/markqvist/rnodeconfigutil). All firmware releases are now handled and installed directly through the `rnodeconf` utility, which is inclueded in the `rns` package. It can be installed via `pip`: @@ -81,23 +100,6 @@ For more detailed instruction and in-depth guides, you can have a look at some o If you would rather just buy a pre-made unit, you can visit [my shop](https://unsigned.io/shop) and purchase my particular version of the [Handheld RNode](https://unsigned.io/shop/handheld-rnode/), which I can assure you is made to the highest quality, and with a lot of care. -## Supported Boards & Devices -The RNode Firmware supports the following boards: - -- Handheld v2.x RNodes from [unsigned.io](https://unsigned.io/shop/product/handheld-rnode) -- Original v1.x RNodes from [unsigned.io](https://unsigned.io/shop/product/rnode) -- LilyGO T-Beam v1.1 devices -- LilyGO LoRa32 v2.0 devices -- LilyGO LoRa32 v2.1 devices -- Heltec LoRa32 v2 devices -- Homebrew RNodes based on ATmega1284p boards -- Homebrew RNodes based on ATmega2560 boards -- Homebrew RNodes based on Adafruit Feather ESP32 boards -- Homebrew RNodes based on generic ESP32 boards - -## Supported Transceiver Modules -The RNode Firmware supports all transceiver modules based on **Semtech SX1276** or **Semtech SX1278** chips, that have an **SPI interface** and expose the **DIO_0** interrupt pin from the chip. - ## Support RNode Development You can help support the continued development of open, free and private communications systems by donating via one of the following channels: