RNode_Firmware/sx126x.h
2024-02-13 12:56:14 +01:00

145 lines
3.4 KiB
C++

// Copyright (c) Sandeep Mistry. All rights reserved.
// Licensed under the MIT license.
// Modifications and additions copyright 2023 by Mark Qvist
// Obviously still under the MIT license.
#ifndef SX126X_H
#define SX126X_H
#include <Arduino.h>
#include <SPI.h>
#include "Modem.h"
#define LORA_DEFAULT_SS_PIN 10
#define LORA_DEFAULT_RESET_PIN 9
#define LORA_DEFAULT_DIO0_PIN 2
#define LORA_DEFAULT_RXEN_PIN -1
#define LORA_DEFAULT_TXEN_PIN -1
#define LORA_DEFAULT_BUSY_PIN -1
#define PA_OUTPUT_RFO_PIN 0
#define PA_OUTPUT_PA_BOOST_PIN 1
#define RSSI_OFFSET 157
class sx126x : public Stream {
public:
sx126x();
int begin(long frequency);
void end();
int beginPacket(int implicitHeader = false);
int endPacket();
int parsePacket(int size = 0);
int packetRssi();
int currentRssi();
uint8_t packetRssiRaw();
uint8_t currentRssiRaw();
uint8_t packetSnrRaw();
float packetSnr();
long packetFrequencyError();
// from Print
virtual size_t write(uint8_t byte);
virtual size_t write(const uint8_t *buffer, size_t size);
// from Stream
virtual int available();
virtual int read();
virtual int peek();
virtual void flush();
void onReceive(void(*callback)(int));
void receive(int size = 0);
void idle();
void sleep();
bool preInit();
uint8_t getTxPower();
void setTxPower(int level, int outputPin = PA_OUTPUT_PA_BOOST_PIN);
uint32_t getFrequency();
void setFrequency(long frequency);
void setSpreadingFactor(int sf);
long getSignalBandwidth();
void setSignalBandwidth(long sbw);
void setCodingRate4(int denominator);
void setPreambleLength(long length);
void setSyncWord(uint16_t sw);
uint8_t modemStatus();
void enableCrc();
void disableCrc();
void enableTCXO();
void disableTCXO();
void rxAntEnable();
void loraMode();
void waitOnBusy();
void executeOpcode(uint8_t opcode, uint8_t *buffer, uint8_t size);
void executeOpcodeRead(uint8_t opcode, uint8_t *buffer, uint8_t size);
void writeBuffer(const uint8_t* buffer, size_t size);
void readBuffer(uint8_t* buffer, size_t size);
void setPacketParams(long preamble, uint8_t headermode, uint8_t length, uint8_t crc);
void setModulationParams(uint8_t sf, uint8_t bw, uint8_t cr, int ldro);
// deprecated
void crc() { enableCrc(); }
void noCrc() { disableCrc(); }
byte random();
void setPins(int ss = LORA_DEFAULT_SS_PIN, int reset = LORA_DEFAULT_RESET_PIN, int dio0 = LORA_DEFAULT_DIO0_PIN, int busy = LORA_DEFAULT_BUSY_PIN, int rxen = LORA_DEFAULT_RXEN_PIN);
void setSPIFrequency(uint32_t frequency);
void dumpRegisters(Stream& out);
private:
void explicitHeaderMode();
void implicitHeaderMode();
void handleDio0Rise();
uint8_t readRegister(uint16_t address);
void writeRegister(uint16_t address, uint8_t value);
uint8_t singleTransfer(uint8_t opcode, uint16_t address, uint8_t value);
static void onDio0Rise();
void handleLowDataRate();
void optimizeModemSensitivity();
void reset(void);
private:
SPISettings _spiSettings;
int _ss;
int _reset;
int _dio0;
int _rxen;
int _busy;
long _frequency;
int _txp;
uint8_t _sf;
uint8_t _bw;
uint8_t _cr;
uint8_t _ldro;
int _packetIndex;
int _preambleLength;
int _implicitHeaderMode;
int _payloadLength;
int _crcMode;
int _fifo_tx_addr_ptr;
int _fifo_rx_addr_ptr;
uint8_t _packet[255];
bool _preinit_done;
void (*_onReceive)(int);
};
extern sx126x sx126x_modem;
#endif