RNode_Firmware/Libraries/RNode.py
2018-06-27 14:08:16 +02:00

480 lines
15 KiB
Python

from __future__ import print_function
from time import sleep
import sys
import serial
import threading
import time
import math
class KISS():
FEND = chr(0xC0)
FESC = chr(0xDB)
TFEND = chr(0xDC)
TFESC = chr(0xDD)
CMD_UNKNOWN = chr(0xFE)
CMD_DATA = chr(0x00)
CMD_FREQUENCY = chr(0x01)
CMD_BANDWIDTH = chr(0x02)
CMD_TXPOWER = chr(0x03)
CMD_SF = chr(0x04)
CMD_CR = chr(0x05)
CMD_RADIO_STATE = chr(0x06)
CMD_RADIO_LOCK = chr(0x07)
CMD_DETECT = chr(0x08)
CMD_PROMISC = chr(0x0E)
CMD_READY = chr(0x0F)
CMD_STAT_RX = chr(0x21)
CMD_STAT_TX = chr(0x22)
CMD_STAT_RSSI = chr(0x23)
CMD_BLINK = chr(0x30)
CMD_RANDOM = chr(0x40)
CMD_FW_VERSION = chr(0x50)
CMD_ROM_READ = chr(0x51)
DETECT_REQ = chr(0x73)
DETECT_RESP = chr(0x46)
RADIO_STATE_OFF = chr(0x00)
RADIO_STATE_ON = chr(0x01)
RADIO_STATE_ASK = chr(0xFF)
CMD_ERROR = chr(0x90)
ERROR_INITRADIO = chr(0x01)
ERROR_TXFAILED = chr(0x02)
ERROR_EEPROM_LOCKED = chr(0x03)
@staticmethod
def escape(data):
data = data.replace(chr(0xdb), chr(0xdb)+chr(0xdd))
data = data.replace(chr(0xc0), chr(0xdb)+chr(0xdc))
return data
class RNodeInterface():
MTU = 500
MAX_CHUNK = 32768
FREQ_MIN = 137000000
FREQ_MAX = 1020000000
LOG_CRITICAL = 0
LOG_ERROR = 1
LOG_WARNING = 2
LOG_NOTICE = 3
LOG_INFO = 4
LOG_VERBOSE = 5
LOG_DEBUG = 6
LOG_EXTREME = 7
RSSI_OFFSET = 292
def __init__(self, callback, name, port, frequency = None, bandwidth = None, txpower = None, sf = None, cr = None, loglevel = -1, flow_control = True):
self.serial = None
self.loglevel = loglevel
self.callback = callback
self.name = name
self.port = port
self.speed = 115200
self.databits = 8
self.parity = serial.PARITY_NONE
self.stopbits = 1
self.timeout = 100
self.online = False
self.frequency = frequency
self.bandwidth = bandwidth
self.txpower = txpower
self.sf = sf
self.cr = cr
self.state = KISS.RADIO_STATE_OFF
self.bitrate = 0
self.r_frequency = None
self.r_bandwidth = None
self.r_txpower = None
self.r_sf = None
self.r_cr = None
self.r_state = None
self.r_lock = None
self.r_stat_rx = None
self.r_stat_tx = None
self.r_stat_rssi = None
self.r_random = None
self.packet_queue = []
self.flow_control = flow_control
self.interface_ready = False
self.validcfg = True
if (self.frequency < RNodeInterface.FREQ_MIN or self.frequency > RNodeInterface.FREQ_MAX):
self.log("Invalid frequency configured for "+str(self), RNodeInterface.LOG_ERROR)
self.validcfg = False
if (self.txpower < 0 or self.txpower > 17):
self.log("Invalid TX power configured for "+str(self), RNodeInterface.LOG_ERROR)
self.validcfg = False
if (self.bandwidth < 7800 or self.bandwidth > 500000):
self.log("Invalid bandwidth configured for "+str(self), RNodeInterface.LOG_ERROR)
self.validcfg = False
if (self.sf < 7 or self.sf > 12):
self.log("Invalid spreading factor configured for "+str(self), RNodeInterface.LOG_ERROR)
self.validcfg = False
if (not self.validcfg):
raise ValueError("The configuration for "+str(self)+" contains errors, interface is offline")
try:
self.log("Opening serial port "+self.port+"...")
self.serial = serial.Serial(
port = self.port,
baudrate = self.speed,
bytesize = self.databits,
parity = self.parity,
stopbits = self.stopbits,
xonxoff = False,
rtscts = False,
timeout = 0,
inter_byte_timeout = None,
write_timeout = None,
dsrdtr = False,
)
except Exception as e:
self.log("Could not open serial port for interface "+str(self), RNodeInterface.LOG_ERROR)
raise e
if self.serial.is_open:
sleep(2.0)
thread = threading.Thread(target=self.readLoop)
thread.setDaemon(True)
thread.start()
self.online = True
self.log("Serial port "+self.port+" is now open")
self.log("Configuring RNode interface...", RNodeInterface.LOG_VERBOSE)
self.initRadio()
if (self.validateRadioState()):
self.interface_ready = True
self.log(str(self)+" is configured and powered up")
sleep(1.0)
else:
self.log("After configuring "+str(self)+", the actual radio parameters did not match your configuration.", RNodeInterface.LOG_ERROR)
self.log("Make sure that your hardware actually supports the parameters specified in the configuration", RNodeInterface.LOG_ERROR)
self.log("Aborting RNode startup", RNodeInterface.LOG_ERROR)
self.serial.close()
raise IOError("RNode interface did not pass validation")
else:
raise IOError("Could not open serial port")
def log(self, message, level):
pass
def initRadio(self):
self.setFrequency()
self.setBandwidth()
self.setTXPower()
self.setSpreadingFactor()
self.setRadioState(KISS.RADIO_STATE_ON)
def setFrequency(self):
c1 = self.frequency >> 24
c2 = self.frequency >> 16 & 0xFF
c3 = self.frequency >> 8 & 0xFF
c4 = self.frequency & 0xFF
data = KISS.escape(chr(c1)+chr(c2)+chr(c3)+chr(c4))
kiss_command = KISS.FEND+KISS.CMD_FREQUENCY+data+KISS.FEND
written = self.serial.write(kiss_command)
if written != len(kiss_command):
raise IOError("An IO error occurred while configuring frequency for "+self(str))
def setBandwidth(self):
c1 = self.bandwidth >> 24
c2 = self.bandwidth >> 16 & 0xFF
c3 = self.bandwidth >> 8 & 0xFF
c4 = self.bandwidth & 0xFF
data = KISS.escape(chr(c1)+chr(c2)+chr(c3)+chr(c4))
kiss_command = KISS.FEND+KISS.CMD_BANDWIDTH+data+KISS.FEND
written = self.serial.write(kiss_command)
if written != len(kiss_command):
raise IOError("An IO error occurred while configuring bandwidth for "+self(str))
def setTXPower(self):
txp = chr(self.txpower)
kiss_command = KISS.FEND+KISS.CMD_TXPOWER+txp+KISS.FEND
written = self.serial.write(kiss_command)
if written != len(kiss_command):
raise IOError("An IO error occurred while configuring TX power for "+self(str))
def setSpreadingFactor(self):
sf = chr(self.sf)
kiss_command = KISS.FEND+KISS.CMD_SF+sf+KISS.FEND
written = self.serial.write(kiss_command)
if written != len(kiss_command):
raise IOError("An IO error occurred while configuring spreading factor for "+self(str))
def setCodingRate(self):
cr = chr(self.cr)
kiss_command = KISS.FEND+KISS.CMD_CR+cr+KISS.FEND
written = self.serial.write(kiss_command)
if written != len(kiss_command):
raise IOError("An IO error occurred while configuring coding rate for "+self(str))
def setRadioState(self, state):
kiss_command = KISS.FEND+KISS.CMD_RADIO_STATE+state+KISS.FEND
written = self.serial.write(kiss_command)
if written != len(kiss_command):
raise IOError("An IO error occurred while configuring radio state for "+self(str))
def validateRadioState(self):
self.log("Validating radio configuration for "+str(self)+"...", RNodeInterface.LOG_VERBOSE)
sleep(0.25);
if (self.frequency != self.r_frequency):
self.log("Frequency mismatch", RNodeInterface.LOG_ERROR)
self.validcfg = False
if (self.bandwidth != self.r_bandwidth):
self.log("Bandwidth mismatch", RNodeInterface.LOG_ERROR)
self.validcfg = False
if (self.txpower != self.r_txpower):
self.log("TX power mismatch", RNodeInterface.LOG_ERROR)
self.validcfg = False
if (self.sf != self.r_sf):
self.log("Spreading factor mismatch", RNodeInterface.LOG_ERROR)
self.validcfg = False
if (self.validcfg):
return True
else:
return False
def setPromiscuousMode(self, state):
if state == True:
kiss_command = KISS.FEND+KISS.CMD_PROMISC+chr(0x01)+KISS.FEND
else:
kiss_command = KISS.FEND+KISS.CMD_PROMISC+chr(0x00)+KISS.FEND
written = self.serial.write(kiss_command)
if written != len(kiss_command):
raise IOError("An IO error occurred while configuring promiscuous mode for "+self(str))
def updateBitrate(self):
try:
self.bitrate = self.r_sf * ( (4.0/self.cr) / (math.pow(2,self.r_sf)/(self.r_bandwidth/1000)) ) * 1000
self.bitrate_kbps = round(self.bitrate/1000.0, 2)
self.log(str(self)+" On-air bitrate is now "+str(self.bitrate_kbps)+ " kbps", RNodeInterface.LOG_DEBUG)
except:
self.bitrate = 0
def processIncoming(self, data):
self.callback(data, self)
def send(self, data):
self.processOutgoing(data)
def processOutgoing(self,data):
if self.online:
if self.interface_ready:
if self.flow_control:
self.interface_ready = False
data = KISS.escape(data)
frame = chr(0xc0)+chr(0x00)+data+chr(0xc0)
written = self.serial.write(frame)
if written != len(frame):
raise IOError("Serial interface only wrote "+str(written)+" bytes of "+str(len(data)))
else:
self.queue(data)
def queue(self, data):
self.packet_queue.append(data)
def process_queue(self):
if len(self.packet_queue) > 0:
data = self.packet_queue.pop(0)
self.interface_ready = True
self.processOutgoing(data)
elif len(self.packet_queue) == 0:
self.interface_ready = True
def readLoop(self):
try:
in_frame = False
escape = False
command = KISS.CMD_UNKNOWN
data_buffer = ""
command_buffer = ""
last_read_ms = int(time.time()*1000)
while self.serial.is_open:
if self.serial.in_waiting:
byte = self.serial.read(1)
last_read_ms = int(time.time()*1000)
if (in_frame and byte == KISS.FEND and command == KISS.CMD_DATA):
in_frame = False
self.processIncoming(data_buffer)
data_buffer = ""
command_buffer = ""
elif (byte == KISS.FEND):
in_frame = True
command = KISS.CMD_UNKNOWN
data_buffer = ""
command_buffer = ""
elif (in_frame and len(data_buffer) < RNodeInterface.MTU):
if (len(data_buffer) == 0 and command == KISS.CMD_UNKNOWN):
command = byte
elif (command == KISS.CMD_DATA):
if (byte == KISS.FESC):
escape = True
else:
if (escape):
if (byte == KISS.TFEND):
byte = KISS.FEND
if (byte == KISS.TFESC):
byte = KISS.FESC
escape = False
data_buffer = data_buffer+byte
elif (command == KISS.CMD_FREQUENCY):
if (byte == KISS.FESC):
escape = True
else:
if (escape):
if (byte == KISS.TFEND):
byte = KISS.FEND
if (byte == KISS.TFESC):
byte = KISS.FESC
escape = False
command_buffer = command_buffer+byte
if (len(command_buffer) == 4):
self.r_frequency = ord(command_buffer[0]) << 24 | ord(command_buffer[1]) << 16 | ord(command_buffer[2]) << 8 | ord(command_buffer[3])
self.log(str(self)+" Radio reporting frequency is "+str(self.r_frequency/1000000.0)+" MHz", RNodeInterface.LOG_DEBUG)
self.updateBitrate()
elif (command == KISS.CMD_BANDWIDTH):
if (byte == KISS.FESC):
escape = True
else:
if (escape):
if (byte == KISS.TFEND):
byte = KISS.FEND
if (byte == KISS.TFESC):
byte = KISS.FESC
escape = False
command_buffer = command_buffer+byte
if (len(command_buffer) == 4):
self.r_bandwidth = ord(command_buffer[0]) << 24 | ord(command_buffer[1]) << 16 | ord(command_buffer[2]) << 8 | ord(command_buffer[3])
self.log(str(self)+" Radio reporting bandwidth is "+str(self.r_bandwidth/1000.0)+" KHz", RNodeInterface.LOG_DEBUG)
self.updateBitrate()
elif (command == KISS.CMD_TXPOWER):
self.r_txpower = ord(byte)
self.log(str(self)+" Radio reporting TX power is "+str(self.r_txpower)+" dBm", RNodeInterface.LOG_DEBUG)
elif (command == KISS.CMD_SF):
self.r_sf = ord(byte)
self.log(str(self)+" Radio reporting spreading factor is "+str(self.r_sf), RNodeInterface.LOG_DEBUG)
self.updateBitrate()
elif (command == KISS.CMD_CR):
self.r_cr = ord(byte)
self.log(str(self)+" Radio reporting coding rate is "+str(self.r_cr), RNodeInterface.LOG_DEBUG)
self.updateBitrate()
elif (command == KISS.CMD_RADIO_STATE):
self.r_state = ord(byte)
elif (command == KISS.CMD_RADIO_LOCK):
self.r_lock = ord(byte)
elif (command == KISS.CMD_STAT_RX):
if (byte == KISS.FESC):
escape = True
else:
if (escape):
if (byte == KISS.TFEND):
byte = KISS.FEND
if (byte == KISS.TFESC):
byte = KISS.FESC
escape = False
command_buffer = command_buffer+byte
if (len(command_buffer) == 4):
self.r_stat_rx = ord(command_buffer[0]) << 24 | ord(command_buffer[1]) << 16 | ord(command_buffer[2]) << 8 | ord(command_buffer[3])
elif (command == KISS.CMD_STAT_TX):
if (byte == KISS.FESC):
escape = True
else:
if (escape):
if (byte == KISS.TFEND):
byte = KISS.FEND
if (byte == KISS.TFESC):
byte = KISS.FESC
escape = False
command_buffer = command_buffer+byte
if (len(command_buffer) == 4):
self.r_stat_tx = ord(command_buffer[0]) << 24 | ord(command_buffer[1]) << 16 | ord(command_buffer[2]) << 8 | ord(command_buffer[3])
elif (command == KISS.CMD_STAT_RSSI):
self.r_stat_rssi = ord(byte)-RSSI_OFFSET
elif (command == KISS.CMD_RANDOM):
self.r_random = ord(byte)
elif (command == KISS.CMD_ERROR):
if (byte == KISS.ERROR_INITRADIO):
self.log(str(self)+" hardware initialisation error (code "+self.hexrep(byte)+")", RNodeInterface.LOG_ERROR)
elif (byte == KISS.ERROR_INITRADIO):
self.log(str(self)+" hardware TX error (code "+self.hexrep(byte)+")", RNodeInterface.LOG_ERROR)
else:
self.log(str(self)+" hardware error (code "+self.hexrep(byte)+")", RNodeInterface.LOG_ERROR)
elif (command == KISS.CMD_READY):
# TODO: add timeout and reset if ready
# command never arrives
self.process_queue()
else:
time_since_last = int(time.time()*1000) - last_read_ms
if len(data_buffer) > 0 and time_since_last > self.timeout:
self.log(str(self)+" serial read timeout", RNodeInterface.LOG_DEBUG)
data_buffer = ""
in_frame = False
command = KISS.CMD_UNKNOWN
escape = False
sleep(0.08)
except Exception as e:
self.online = False
self.log("A serial port error occurred, the contained exception was: "+str(e), RNodeInterface.LOG_ERROR)
self.log("The interface "+str(self.name)+" is now offline.", RNodeInterface.LOG_ERROR)
def log(self, msg, level=3):
logtimefmt = "%Y-%m-%d %H:%M:%S"
if self.loglevel >= level:
timestamp = time.time()
logstring = "["+time.strftime(logtimefmt)+"] ["+self.loglevelname(level)+"] "+msg
print(logstring)
def loglevelname(self, level):
if (level == RNodeInterface.LOG_CRITICAL):
return "Critical"
if (level == RNodeInterface.LOG_ERROR):
return "Error"
if (level == RNodeInterface.LOG_WARNING):
return "Warning"
if (level == RNodeInterface.LOG_NOTICE):
return "Notice"
if (level == RNodeInterface.LOG_INFO):
return "Info"
if (level == RNodeInterface.LOG_VERBOSE):
return "Verbose"
if (level == RNodeInterface.LOG_DEBUG):
return "Debug"
if (level == RNodeInterface.LOG_EXTREME):
return "Extra"
def hexrep(data, delimit=True):
delimiter = ":"
if not delimit:
delimiter = ""
hexrep = delimiter.join("{:02x}".format(ord(c)) for c in data)
return hexrep
def __str__(self):
return "RNodeInterface["+self.name+"]"