diff --git a/Display.h b/Display.h
index 706abe4..392d08d 100644
--- a/Display.h
+++ b/Display.h
@@ -327,6 +327,9 @@ void update_stat_area() {
       display.drawBitmap(p_as_x, p_as_y, bm_updating, stat_area.width(), stat_area.height(), SSD1306_BLACK, SSD1306_WHITE);
     } else if (console_active && device_init_done) {
       display.drawBitmap(p_as_x, p_as_y, bm_console, stat_area.width(), stat_area.height(), SSD1306_BLACK, SSD1306_WHITE);
+      if (disp_mode == DISP_MODE_LANDSCAPE) {
+        display.drawLine(p_as_x, 0, p_as_x, 64, SSD1306_WHITE);
+      }
     }
   }
 }
diff --git a/Makefile b/Makefile
index 0f25b12..929a2f4 100644
--- a/Makefile
+++ b/Makefile
@@ -96,49 +96,49 @@ upload-tbeam:
 	arduino-cli upload -p /dev/ttyUSB1 --fqbn esp32:esp32:t-beam
 	@sleep 1
 	rnodeconf /dev/ttyUSB1 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.t-beam/RNode_Firmware.ino.bin)
-	@sleep 1
+	@sleep 3
 	python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB1 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 upload-lora32_v20:
 	arduino-cli upload -p /dev/ttyUSB1 --fqbn esp32:esp32:ttgo-lora32
 	@sleep 1
 	rnodeconf /dev/ttyUSB1 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin)
-	@sleep 1
+	@sleep 3
 	python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB1 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 upload-lora32_v21:
 	arduino-cli upload -p /dev/ttyACM1 --fqbn esp32:esp32:ttgo-lora32
 	@sleep 1
 	rnodeconf /dev/ttyACM1 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin)
-	@sleep 1
+	@sleep 3
 	python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM1 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 upload-heltec32_v2:
 	arduino-cli upload -p /dev/ttyUSB1 --fqbn esp32:esp32:heltec_wifi_lora_32_V2
 	@sleep 1
 	rnodeconf /dev/ttyUSB1 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bin)
-	@sleep 1
+	@sleep 3
 	python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB1 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 upload-rnode_ng_20:
 	arduino-cli upload -p /dev/ttyUSB1 --fqbn esp32:esp32:ttgo-lora32
 	@sleep 1
 	rnodeconf /dev/ttyUSB1 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin)
-	@sleep 1
+	@sleep 3
 	python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB1 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 upload-rnode_ng_21:
 	arduino-cli upload -p /dev/ttyACM1 --fqbn esp32:esp32:ttgo-lora32
 	@sleep 1
 	rnodeconf /dev/ttyACM1 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin)
-	@sleep 1
+	@sleep 3
 	python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM1 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 upload-featheresp32:
 	arduino-cli upload -p /dev/ttyUSB1 --fqbn esp32:esp32:featheresp32
 	@sleep 1
 	rnodeconf /dev/ttyUSB1 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.featheresp32/RNode_Firmware.ino.bin)
-	@sleep 1
+	@sleep 3
 	python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB1 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin