mirror of
https://github.com/liberatedsystems/RNode_Firmware_CE.git
synced 2024-07-02 14:34:13 +02:00
Added display, power management and other foundations for bluetooth connectivity.
This commit is contained in:
Mark Qvist
parent
2c826fb3dc
commit
b0f49c0cce
43
Config.h
43
Config.h
@ -4,7 +4,7 @@
|
||||
#define CONFIG_H
|
||||
|
||||
#define MAJ_VERS 0x01
|
||||
#define MIN_VERS 0x1E
|
||||
#define MIN_VERS 0x28
|
||||
|
||||
#define PLATFORM_AVR 0x90
|
||||
#define PLATFORM_ESP32 0x80
|
||||
@ -36,6 +36,17 @@
|
||||
#elif defined(ESP32)
|
||||
#define PLATFORM PLATFORM_ESP32
|
||||
#define MCU_VARIANT MCU_ESP32
|
||||
|
||||
#define CABLE_STATE_DISCONNECTED 0x00
|
||||
#define CABLE_STATE_CONNECTED 0x01
|
||||
uint8_t cable_state = CABLE_STATE_DISCONNECTED;
|
||||
|
||||
#define BT_STATE_NA 0xff
|
||||
#define BT_STATE_OFF 0x00
|
||||
#define BT_STATE_ON 0x01
|
||||
#define BT_STATE_PAIRING 0x02
|
||||
#define BT_STATE_CONNECTED 0x03
|
||||
uint8_t bt_state = BT_STATE_NA;
|
||||
#else
|
||||
#error "The firmware cannot be compiled for the selected MCU variant"
|
||||
#endif
|
||||
@ -49,6 +60,10 @@
|
||||
|
||||
// MCU dependent configuration parameters
|
||||
|
||||
#define HAS_DISPLAY false
|
||||
#define HAS_BLUETOOTH false
|
||||
#define HAS_PMU false
|
||||
|
||||
#if MCU_VARIANT == MCU_1284P
|
||||
const int pin_cs = 4;
|
||||
const int pin_reset = 3;
|
||||
@ -102,6 +117,7 @@
|
||||
const int pin_dio = 26;
|
||||
const int pin_led_rx = 2;
|
||||
const int pin_led_tx = 4;
|
||||
#define HAS_PMU true
|
||||
#elif BOARD_MODEL == BOARD_HUZZAH32
|
||||
const int pin_cs = 4;
|
||||
const int pin_reset = 36;
|
||||
@ -119,6 +135,8 @@
|
||||
const int pin_led_rx = 22;
|
||||
const int pin_led_tx = 22;
|
||||
#endif
|
||||
#define HAS_DISPLAY true
|
||||
#define HAS_BLUETOOTH true
|
||||
#elif BOARD_MODEL == BOARD_LORA32_V2_1
|
||||
const int pin_cs = 18;
|
||||
const int pin_reset = 23;
|
||||
@ -130,6 +148,9 @@
|
||||
const int pin_led_rx = 25;
|
||||
const int pin_led_tx = 25;
|
||||
#endif
|
||||
#define HAS_DISPLAY true
|
||||
#define HAS_BLUETOOTH true
|
||||
#define HAS_PMU true
|
||||
#elif BOARD_MODEL == BOARD_HELTEC32_V2
|
||||
const int pin_cs = 18;
|
||||
const int pin_reset = 23;
|
||||
@ -152,6 +173,8 @@
|
||||
const int pin_led_rx = 22;
|
||||
const int pin_led_tx = 22;
|
||||
#endif
|
||||
#define HAS_DISPLAY true
|
||||
#define HAS_BLUETOOTH true
|
||||
#elif BOARD_MODEL == BOARD_RNODE_NG_21
|
||||
const int pin_cs = 18;
|
||||
const int pin_reset = 23;
|
||||
@ -163,10 +186,15 @@
|
||||
const int pin_led_rx = 25;
|
||||
const int pin_led_tx = 25;
|
||||
#endif
|
||||
#define HAS_DISPLAY true
|
||||
#define HAS_BLUETOOTH true
|
||||
#define HAS_PMU true
|
||||
#else
|
||||
#error An unsupported board was selected. Cannot compile RNode firmware.
|
||||
#endif
|
||||
|
||||
bool mw_radio_online = false;
|
||||
|
||||
#define CONFIG_UART_BUFFER_SIZE 6144
|
||||
#define CONFIG_QUEUE_SIZE 6144
|
||||
#define CONFIG_QUEUE_MAX_LENGTH 200
|
||||
@ -206,6 +234,8 @@
|
||||
bool radio_locked = true;
|
||||
bool radio_online = false;
|
||||
bool hw_ready = false;
|
||||
bool disp_ready = false;
|
||||
bool pmu_ready = false;
|
||||
bool promisc = false;
|
||||
bool implicit = false;
|
||||
uint8_t implicit_l = 0;
|
||||
@ -214,9 +244,10 @@
|
||||
uint8_t model = 0x00;
|
||||
uint8_t hwrev = 0x00;
|
||||
|
||||
int current_rssi = -292;
|
||||
int last_rssi = -292;
|
||||
uint8_t last_rssi_raw = 0x00;
|
||||
uint8_t last_snr_raw = 0x00;
|
||||
uint8_t last_snr_raw = 0x80;
|
||||
uint8_t seq = 0xFF;
|
||||
uint16_t read_len = 0;
|
||||
|
||||
@ -249,6 +280,14 @@
|
||||
const uint8_t SIG_SYNCED = 0x02;
|
||||
const uint8_t RX_ONGOING = 0x04;
|
||||
|
||||
// Power management
|
||||
#define BATTERY_STATE_DISCHARGING 0x01
|
||||
#define BATTERY_STATE_CHARGING 0x02
|
||||
#define BATTERY_STATE_CHARGED 0x03
|
||||
float battery_voltage = 0.0;
|
||||
float battery_percent = 0.0;
|
||||
uint8_t battery_state = 0x00;
|
||||
|
||||
// Boot flags
|
||||
#define START_FROM_BOOTLOADER 0x01
|
||||
#define START_FROM_POWERON 0x02
|
||||
|
||||
@ -27,6 +27,10 @@
|
||||
#define CMD_BLINK 0x30
|
||||
#define CMD_RANDOM 0x40
|
||||
|
||||
#define CMD_FB_EXT 0x41
|
||||
#define CMD_FB_READ 0x42
|
||||
#define CMD_FB_WRITE 0x43
|
||||
|
||||
#define CMD_BOARD 0x47
|
||||
#define CMD_PLATFORM 0x48
|
||||
#define CMD_MCU 0x49
|
||||
|
||||
@ -24,8 +24,6 @@
|
||||
#include <SPI.h>
|
||||
#include "Utilities.h"
|
||||
|
||||
|
||||
|
||||
FIFOBuffer serialFIFO;
|
||||
uint8_t serialBuffer[CONFIG_UART_BUFFER_SIZE+1];
|
||||
|
||||
@ -89,9 +87,8 @@ void setup() {
|
||||
LoRa.setPins(pin_cs, pin_reset, pin_dio);
|
||||
|
||||
#if MCU_VARIANT == MCU_ESP32
|
||||
#if BOARD_MODEL == BOARD_TBEAM
|
||||
Wire.begin(I2C_SDA, I2C_SCL);
|
||||
initPMU();
|
||||
#if HAS_PMU == true
|
||||
pmu_ready = init_pmu();
|
||||
#endif
|
||||
|
||||
kiss_indicate_reset();
|
||||
@ -99,6 +96,14 @@ void setup() {
|
||||
|
||||
// Validate board health, EEPROM and config
|
||||
validateStatus();
|
||||
|
||||
#if HAS_DISPLAY
|
||||
disp_ready = display_init();
|
||||
#endif
|
||||
|
||||
#if HAS_BLUETOOTH
|
||||
bt_ready = bt_init();
|
||||
#endif
|
||||
}
|
||||
|
||||
void lora_receive() {
|
||||
@ -448,6 +453,7 @@ void serialCallback(uint8_t sbyte) {
|
||||
if (frame_len == 0 && command == CMD_UNKNOWN) {
|
||||
command = sbyte;
|
||||
} else if (command == CMD_DATA) {
|
||||
cable_state = CABLE_STATE_CONNECTED;
|
||||
if (sbyte == FESC) {
|
||||
ESCAPE = true;
|
||||
} else {
|
||||
@ -547,6 +553,7 @@ void serialCallback(uint8_t sbyte) {
|
||||
set_implicit_length(sbyte);
|
||||
kiss_indicate_implicit_length();
|
||||
} else if (command == CMD_RADIO_STATE) {
|
||||
cable_state = CABLE_STATE_CONNECTED;
|
||||
if (sbyte == 0xFF) {
|
||||
kiss_indicate_radiostate();
|
||||
} else if (sbyte == 0x00) {
|
||||
@ -571,6 +578,7 @@ void serialCallback(uint8_t sbyte) {
|
||||
kiss_indicate_random(getRandom());
|
||||
} else if (command == CMD_DETECT) {
|
||||
if (sbyte == DETECT_REQ) {
|
||||
cable_state = CABLE_STATE_CONNECTED;
|
||||
kiss_indicate_detect();
|
||||
}
|
||||
} else if (command == CMD_PROMISC) {
|
||||
@ -623,6 +631,40 @@ void serialCallback(uint8_t sbyte) {
|
||||
eeprom_conf_save();
|
||||
} else if (command == CMD_CONF_DELETE) {
|
||||
eeprom_conf_delete();
|
||||
} else if (command == CMD_FB_EXT) {
|
||||
#if HAS_DISPLAY == true
|
||||
if (sbyte == 0xFF) {
|
||||
kiss_indicate_fbstate();
|
||||
} else if (sbyte == 0x00) {
|
||||
ext_fb_disable();
|
||||
kiss_indicate_fbstate();
|
||||
} else if (sbyte == 0x01) {
|
||||
ext_fb_enable();
|
||||
kiss_indicate_fbstate();
|
||||
}
|
||||
#endif
|
||||
} else if (command == CMD_FB_WRITE) {
|
||||
if (sbyte == FESC) {
|
||||
ESCAPE = true;
|
||||
} else {
|
||||
if (ESCAPE) {
|
||||
if (sbyte == TFEND) sbyte = FEND;
|
||||
if (sbyte == TFESC) sbyte = FESC;
|
||||
ESCAPE = false;
|
||||
}
|
||||
cbuf[frame_len++] = sbyte;
|
||||
}
|
||||
|
||||
if (frame_len == 9) {
|
||||
uint8_t line = cbuf[0];
|
||||
if (line > 63) line = 63;
|
||||
int fb_o = line*8;
|
||||
memcpy(fb+fb_o, cbuf+1, 8);
|
||||
}
|
||||
} else if (command == CMD_FB_READ) {
|
||||
if (sbyte != 0x00) {
|
||||
kiss_indicate_fb();
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
@ -637,6 +679,7 @@ void updateModemStatus() {
|
||||
#endif
|
||||
|
||||
uint8_t status = LoRa.modemStatus();
|
||||
current_rssi = LoRa.currentRssi();
|
||||
last_status_update = millis();
|
||||
|
||||
#if MCU_VARIANT == MCU_ESP32
|
||||
@ -783,6 +826,18 @@ void loop() {
|
||||
#else
|
||||
if (!fifo_isempty_locked(&serialFIFO)) serial_poll();
|
||||
#endif
|
||||
|
||||
#if HAS_DISPLAY
|
||||
if (disp_ready) {
|
||||
update_display();
|
||||
}
|
||||
#endif
|
||||
|
||||
#if HAS_PMU
|
||||
if (pmu_ready) {
|
||||
update_pmu();
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
volatile bool serial_polling = false;
|
||||
|
||||
122
Utilities.h
122
Utilities.h
@ -6,6 +6,18 @@
|
||||
#include "Framing.h"
|
||||
#include "MD5.h"
|
||||
|
||||
#if HAS_DISPLAY == true
|
||||
#include "Display.h"
|
||||
#endif
|
||||
|
||||
#if HAS_BLUETOOTH == true
|
||||
#include "Bluetooth.h"
|
||||
#endif
|
||||
|
||||
#if HAS_PMU == true
|
||||
#include "Power.h"
|
||||
#endif
|
||||
|
||||
#if MCU_VARIANT == MCU_ESP32
|
||||
#include "soc/rtc_wdt.h"
|
||||
#define ISR_VECT IRAM_ATTR
|
||||
@ -568,6 +580,37 @@ void kiss_indicate_random(uint8_t byte) {
|
||||
Serial.write(FEND);
|
||||
}
|
||||
|
||||
void kiss_indicate_fbstate() {
|
||||
Serial.write(FEND);
|
||||
Serial.write(CMD_FB_EXT);
|
||||
#if HAS_DISPLAY
|
||||
if (disp_ext_fb) {
|
||||
Serial.write(0x01);
|
||||
} else {
|
||||
Serial.write(0x00);
|
||||
}
|
||||
#else
|
||||
Serial.write(0xFF)
|
||||
#endif
|
||||
Serial.write(FEND);
|
||||
}
|
||||
|
||||
void kiss_indicate_fb() {
|
||||
Serial.write(FEND);
|
||||
Serial.write(CMD_FB_READ);
|
||||
#if HAS_DISPLAY
|
||||
for (int i = 0; i < 512; i++) {
|
||||
uint8_t byte = fb[i];
|
||||
if (byte == FEND) { Serial.write(FESC); byte = TFEND; }
|
||||
if (byte == FESC) { Serial.write(FESC); byte = TFESC; }
|
||||
Serial.write(byte);
|
||||
}
|
||||
#else
|
||||
Serial.write(0xFF)
|
||||
#endif
|
||||
Serial.write(FEND);
|
||||
}
|
||||
|
||||
void kiss_indicate_ready() {
|
||||
Serial.write(FEND);
|
||||
Serial.write(CMD_READY);
|
||||
@ -1087,82 +1130,3 @@ inline void fifo16_init(FIFOBuffer16 *f, uint16_t *buffer, uint16_t size) {
|
||||
inline uint16_t fifo16_len(FIFOBuffer16 *f) {
|
||||
return (f->end - f->begin);
|
||||
}
|
||||
|
||||
#if BOARD_MODEL == BOARD_TBEAM
|
||||
#include <axp20x.h>
|
||||
AXP20X_Class PMU;
|
||||
|
||||
bool initPMU()
|
||||
{
|
||||
if (PMU.begin(Wire, AXP192_SLAVE_ADDRESS) == AXP_FAIL) {
|
||||
return false;
|
||||
}
|
||||
/*
|
||||
* The charging indicator can be turned on or off
|
||||
* * * */
|
||||
PMU.setChgLEDMode(AXP20X_LED_OFF);
|
||||
|
||||
/*
|
||||
* The default ESP32 power supply has been turned on,
|
||||
* no need to set, please do not set it, if it is turned off,
|
||||
* it will not be able to program
|
||||
*
|
||||
* PMU.setDCDC3Voltage(3300);
|
||||
* PMU.setPowerOutPut(AXP192_DCDC3, AXP202_ON);
|
||||
*
|
||||
* * * */
|
||||
|
||||
/*
|
||||
* Turn off unused power sources to save power
|
||||
* **/
|
||||
|
||||
PMU.setPowerOutPut(AXP192_DCDC1, AXP202_OFF);
|
||||
PMU.setPowerOutPut(AXP192_DCDC2, AXP202_OFF);
|
||||
PMU.setPowerOutPut(AXP192_LDO2, AXP202_OFF);
|
||||
PMU.setPowerOutPut(AXP192_LDO3, AXP202_OFF);
|
||||
PMU.setPowerOutPut(AXP192_EXTEN, AXP202_OFF);
|
||||
|
||||
/*
|
||||
* Set the power of LoRa and GPS module to 3.3V
|
||||
**/
|
||||
PMU.setLDO2Voltage(3300); //LoRa VDD
|
||||
PMU.setLDO3Voltage(3300); //GPS VDD
|
||||
PMU.setDCDC1Voltage(3300); //3.3V Pin next to 21 and 22 is controlled by DCDC1
|
||||
|
||||
PMU.setPowerOutPut(AXP192_DCDC1, AXP202_ON);
|
||||
|
||||
// Turn on SX1276
|
||||
PMU.setPowerOutPut(AXP192_LDO2, AXP202_ON);
|
||||
|
||||
// Turn off GPS
|
||||
PMU.setPowerOutPut(AXP192_LDO3, AXP202_OFF);
|
||||
|
||||
pinMode(PMU_IRQ, INPUT_PULLUP);
|
||||
attachInterrupt(PMU_IRQ, [] {
|
||||
// pmu_irq = true;
|
||||
}, FALLING);
|
||||
|
||||
PMU.adc1Enable(AXP202_VBUS_VOL_ADC1 |
|
||||
AXP202_VBUS_CUR_ADC1 |
|
||||
AXP202_BATT_CUR_ADC1 |
|
||||
AXP202_BATT_VOL_ADC1,
|
||||
AXP202_ON);
|
||||
|
||||
PMU.enableIRQ(AXP202_VBUS_REMOVED_IRQ |
|
||||
AXP202_VBUS_CONNECT_IRQ |
|
||||
AXP202_BATT_REMOVED_IRQ |
|
||||
AXP202_BATT_CONNECT_IRQ,
|
||||
AXP202_ON);
|
||||
PMU.clearIRQ();
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
void disablePeripherals()
|
||||
{
|
||||
PMU.setPowerOutPut(AXP192_DCDC1, AXP202_OFF);
|
||||
PMU.setPowerOutPut(AXP192_LDO2, AXP202_OFF);
|
||||
PMU.setPowerOutPut(AXP192_LDO3, AXP202_OFF);
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
Loading…
Reference in New Issue
Block a user