mirror of
https://github.com/liberatedsystems/RNode_Firmware_CE.git
synced 2024-07-02 14:34:13 +02:00
SX126x board defines
This commit is contained in:
Mark Qvist
parent
cec979997e
commit
c31cba0fd8
16
Boards.h
16
Boards.h
@ -293,27 +293,33 @@
|
||||
#elif BOARD_MODEL == BOARD_RNODE_NG_22
|
||||
#define IS_ESP32S3 true
|
||||
#define MODEM SX1262
|
||||
#define DIO2_AS_RF_SWITCH true
|
||||
#define HAS_BUSY true
|
||||
#define HAS_TCXO true
|
||||
|
||||
#define HAS_DISPLAY true
|
||||
#define HAS_BLE true
|
||||
#define HAS_BLUETOOTH false // TODO: Implement
|
||||
#define HAS_CONSOLE false // TODO: Implement
|
||||
#define HAS_PMU true
|
||||
#define HAS_NP true
|
||||
#define HAS_NP false
|
||||
#define HAS_SD false
|
||||
#define HAS_EEPROM true
|
||||
#define HAS_RF_SWITCH_RX_TX true
|
||||
#define HAS_BUSY true
|
||||
|
||||
const int pin_cs = 7;
|
||||
const int pin_reset = 8;
|
||||
const int pin_sclk = 5;
|
||||
const int pin_mosi = 6;
|
||||
const int pin_miso = 3;
|
||||
const int pin_reset = 8;
|
||||
const int pin_rxen = 21;
|
||||
const int pin_tcxo_enable = -1;
|
||||
|
||||
const int pin_dio = 33;
|
||||
const int pin_busy = 34;
|
||||
|
||||
const int pin_np = 38;
|
||||
const int pin_dac = 25;
|
||||
const int pin_adc = 1;
|
||||
|
||||
const int SD_MISO = 2;
|
||||
const int SD_MOSI = 11;
|
||||
const int SD_CLK = 14;
|
||||
|
||||
35
Makefile
35
Makefile
@ -66,6 +66,9 @@ firmware-tbeam:
|
||||
firmware-tbeam_sx126x:
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
|
||||
|
||||
firmware-t3s3:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\""
|
||||
|
||||
firmware-lora32_v10:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
|
||||
|
||||
@ -96,9 +99,6 @@ firmware-rnode_ng_20:
|
||||
firmware-rnode_ng_21:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
|
||||
|
||||
firmware-rnode_ng_22:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\""
|
||||
|
||||
firmware-featheresp32:
|
||||
arduino-cli compile --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
|
||||
|
||||
@ -118,8 +118,8 @@ upload-tbeam:
|
||||
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:t-beam
|
||||
@sleep 1
|
||||
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.t-beam/RNode_Firmware.ino.bin)
|
||||
# @sleep 3
|
||||
# python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
@sleep 3
|
||||
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-lora32_v10:
|
||||
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:ttgo-lora32
|
||||
@ -163,7 +163,7 @@ upload-rnode_ng_21:
|
||||
@sleep 3
|
||||
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
|
||||
|
||||
upload-rnode_ng_22:
|
||||
upload-t3s3:
|
||||
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3
|
||||
@sleep 1
|
||||
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
|
||||
@ -184,7 +184,7 @@ upload-rak4630:
|
||||
|
||||
release: release-all
|
||||
|
||||
release-all: console-site spiffs-image release-rnode release-tbeam release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled firmware-lora32_v21_tcxo release-featheresp32 release-genericesp32 release-heltec32_v2 release-heltec32_v2_extled release-rnode_ng_20 release-rnode_ng_21 release-hashes
|
||||
release-all: console-site spiffs-image release-rnode release-tbeam release-tbeam_sx1262 release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled firmware-lora32_v21_tcxo release-featheresp32 release-genericesp32 release-heltec32_v2 release-heltec32_v2_extled release-rnode_ng_20 release-rnode_ng_21 release-t3s3 release-hashes
|
||||
|
||||
release-hashes:
|
||||
python ./release_hashes.py > ./Release/release.json
|
||||
@ -203,6 +203,15 @@ release-tbeam:
|
||||
zip --junk-paths ./Release/rnode_firmware_tbeam.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tbeam.boot_app0 build/rnode_firmware_tbeam.bin build/rnode_firmware_tbeam.bootloader build/rnode_firmware_tbeam.partitions
|
||||
rm -r build
|
||||
|
||||
release-tbeam_sx1262:
|
||||
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_tbeam_sx1262.boot_app0
|
||||
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.bin build/rnode_firmware_tbeam_sx1262.bin
|
||||
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_tbeam_sx1262.bootloader
|
||||
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.partitions.bin build/rnode_firmware_tbeam_sx1262.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_tbeam_sx1262.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tbeam_sx1262.boot_app0 build/rnode_firmware_tbeam_sx1262.bin build/rnode_firmware_tbeam_sx1262.bootloader build/rnode_firmware_tbeam_sx1262.partitions
|
||||
rm -r build
|
||||
|
||||
release-lora32_v10:
|
||||
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v10.boot_app0
|
||||
@ -302,13 +311,13 @@ release-rnode_ng_21:
|
||||
zip --junk-paths ./Release/rnode_firmware_ng21.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_ng21.boot_app0 build/rnode_firmware_ng21.bin build/rnode_firmware_ng21.bootloader build/rnode_firmware_ng21.partitions
|
||||
rm -r build
|
||||
|
||||
release-rnode_ng_22:
|
||||
release-t3s3:
|
||||
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\""
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_ng22.boot_app0
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_ng22.bin
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_ng22.bootloader
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_ng22.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_ng22.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_ng22.boot_app0 build/rnode_firmware_ng22.bin build/rnode_firmware_ng22.bootloader build/rnode_firmware_ng22.partitions
|
||||
cp ~/.arduino15/packages/esp32/hardware/esp32/2.0.*/tools/partitions/boot_app0.bin build/rnode_firmware_t3s3.boot_app0
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_t3s3.bin
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_t3s3.bootloader
|
||||
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_t3s3.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_t3s3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_t3s3.boot_app0 build/rnode_firmware_t3s3.bin build/rnode_firmware_t3s3.bootloader build/rnode_firmware_t3s3.partitions
|
||||
rm -r build
|
||||
|
||||
release-featheresp32:
|
||||
|
||||
2
ROM.h
2
ROM.h
@ -43,6 +43,8 @@
|
||||
#define MODEL_C9 0xC9
|
||||
#define MODEL_E4 0xE4
|
||||
#define MODEL_E9 0xE9
|
||||
#define MODEL_E3 0xE3
|
||||
#define MODEL_E8 0xE8
|
||||
#define MODEL_FE 0xFE
|
||||
#define MODEL_FF 0xFF
|
||||
|
||||
|
||||
Binary file not shown.
@ -146,6 +146,11 @@ uint8_t boot_vector = 0x00;
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
|
||||
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
|
||||
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
|
||||
#elif BOARD_MODEL == BOARD_RNODE_NG_22
|
||||
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
|
||||
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
|
||||
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
|
||||
#elif BOARD_MODEL == BOARD_TBEAM
|
||||
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
|
||||
@ -1058,6 +1063,8 @@ void setTXPower() {
|
||||
|
||||
if (model == MODEL_E4) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_E9) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_E3) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_E8) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
|
||||
if (model == MODEL_FE) LoRa->setTxPower(lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_FF) LoRa->setTxPower(lora_txp, PA_OUTPUT_RFO_PIN);
|
||||
@ -1295,7 +1302,7 @@ bool eeprom_model_valid() {
|
||||
#elif BOARD_MODEL == BOARD_HMBRW
|
||||
if (model == MODEL_FF || model == MODEL_FE) {
|
||||
#elif BOARD_MODEL == BOARD_TBEAM
|
||||
if (model == MODEL_E4 || model == MODEL_E9) {
|
||||
if (model == MODEL_E4 || model == MODEL_E9 || model == MODEL_E3 || model == MODEL_E8) {
|
||||
#elif BOARD_MODEL == BOARD_LORA32_V1_0
|
||||
if (model == MODEL_BA || model == MODEL_BB) {
|
||||
#elif BOARD_MODEL == BOARD_LORA32_V2_0
|
||||
|
||||
@ -721,6 +721,8 @@ void sx126x::enableTCXO() {
|
||||
uint8_t buf[4] = {MODE_TCXO_3_3V_6X, 0x00, 0x00, 0xFF};
|
||||
#elif BOARD_MODEL == BOARD_TBEAM
|
||||
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
|
||||
#elif BOARD_MODEL == BOARD_RNODE_NG_22
|
||||
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
|
||||
#endif
|
||||
executeOpcode(OP_DIO3_TCXO_CTRL_6X, buf, 4);
|
||||
#endif
|
||||
|
||||
Loading…
Reference in New Issue
Block a user