Added auto reconnection for disconnected serial-based devices

RNS/Interfaces/AX25KISSInterface.py

@@ -58,6 +58,7 @@ class AX25KISSInterface(Interface):
         self.rxb = 0
         self.txb = 0
         
+        self.pyserial = serial
         self.serial   = None
         self.owner    = owner
         self.name     = name
@@ -97,44 +98,48 @@ class AX25KISSInterface(Interface):
             self.parity = serial.PARITY_ODD
 
         try:
-            RNS.log("Opening serial port "+self.port+"...")
+            self.open_port()
-            self.serial = serial.Serial(
-                port = self.port,
-                baudrate = self.speed,
-                bytesize = self.databits,
-                parity = self.parity,
-                stopbits = self.stopbits,
-                xonxoff = False,
-                rtscts = False,
-                timeout = 0,
-                inter_byte_timeout = None,
-                write_timeout = None,
-                dsrdtr = False,
-            )
         except Exception as e:
             RNS.log("Could not open serial port for interface "+str(self), RNS.LOG_ERROR)
             raise e
 
         if self.serial.is_open:
-            # Allow time for interface to initialise before config
+            self.configure_device()
-            sleep(2.0)
-            thread = threading.Thread(target=self.readLoop)
-            thread.setDaemon(True)
-            thread.start()
-            self.online = True
-            RNS.log("Serial port "+self.port+" is now open")
-            RNS.log("Configuring AX.25 KISS interface parameters...")
-            self.setPreamble(self.preamble)
-            self.setTxTail(self.txtail)
-            self.setPersistence(self.persistence)
-            self.setSlotTime(self.slottime)
-            self.setFlowControl(self.flow_control)
-            self.interface_ready = True
-            RNS.log("AX.25 KISS interface configured")
-            sleep(2)
         else:
             raise IOError("Could not open serial port")
 
+    def open_port(self):
+        RNS.log("Opening serial port "+self.port+"...", RNS.LOG_VERBOSE)
+        self.serial = self.pyserial.Serial(
+            port = self.port,
+            baudrate = self.speed,
+            bytesize = self.databits,
+            parity = self.parity,
+            stopbits = self.stopbits,
+            xonxoff = False,
+            rtscts = False,
+            timeout = 0,
+            inter_byte_timeout = None,
+            write_timeout = None,
+            dsrdtr = False,
+        )
+
+    def configure_device(self):
+        # Allow time for interface to initialise before config
+        sleep(2.0)
+        thread = threading.Thread(target=self.readLoop)
+        thread.setDaemon(True)
+        thread.start()
+        self.online = True
+        RNS.log("Serial port "+self.port+" is now open")
+        RNS.log("Configuring AX.25 KISS interface parameters...")
+        self.setPreamble(self.preamble)
+        self.setTxTail(self.txtail)
+        self.setPersistence(self.persistence)
+        self.setSlotTime(self.slottime)
+        self.setFlowControl(self.flow_control)
+        self.interface_ready = True
+        RNS.log("AX.25 KISS interface configured")
 
     def setPreamble(self, preamble):
         preamble_ms = preamble
@@ -315,10 +320,29 @@ class AX25KISSInterface(Interface):
         except Exception as e:
             self.online = False
             RNS.log("A serial port error occurred, the contained exception was: "+str(e), RNS.LOG_ERROR)
-            RNS.log("The interface "+str(self)+" experienced an unrecoverable error and is being torn down. Restart Reticulum to attempt to open this interface again.", RNS.LOG_ERROR)
+            RNS.log("The interface "+str(self)+" experienced an unrecoverable error and is now offline.", RNS.LOG_ERROR)
-
+            
             if RNS.Reticulum.panic_on_interface_error:
                 RNS.panic()
 
+            RNS.log("Reticulum will attempt to reconnect the interface periodically.", RNS.LOG_ERROR)
+
+        self.online = False
+        self.serial.close()
+        self.reconnect_port()
+
+    def reconnect_port(self):
+        while not self.online:
+            try:
+                time.sleep(5)
+                RNS.log("Attempting to reconnect serial port "+str(self.port)+" for "+str(self)+"...", RNS.LOG_VERBOSE)
+                self.open_port()
+                if self.serial.is_open:
+                    self.configure_device()
+            except Exception as e:
+                RNS.log("Error while reconnecting port, the contained exception was: "+str(e), RNS.LOG_ERROR)
+
+        RNS.log("Reconnected serial port for "+str(self))
+
     def __str__(self):
         return "AX25KISSInterface["+self.name+"]"

RNS/Interfaces/KISSInterface.py

@@ -98,7 +98,7 @@ class KISSInterface(Interface):
 
 
     def open_port(self):
-        RNS.log("Opening serial port "+self.port+"...")
+        RNS.log("Opening serial port "+self.port+"...", RNS.LOG_VERBOSE)
         self.serial = self.pyserial.Serial(
             port = self.port,
             baudrate = self.speed,
@@ -299,11 +299,13 @@ class KISSInterface(Interface):
         except Exception as e:
             self.online = False
             RNS.log("A serial port error occurred, the contained exception was: "+str(e), RNS.LOG_ERROR)
-            RNS.log("The interface "+str(self)+" experienced an unrecoverable error and is being torn down. Restart Reticulum to attempt to open this interface again.", RNS.LOG_ERROR)
+            RNS.log("The interface "+str(self)+" experienced an unrecoverable error and is now offline.", RNS.LOG_ERROR)
-
+            
             if RNS.Reticulum.panic_on_interface_error:
                 RNS.panic()
 
+            RNS.log("Reticulum will attempt to reconnect the interface periodically.", RNS.LOG_ERROR)
+
         self.online = False
         self.serial.close()
         self.reconnect_port()
@@ -312,12 +314,14 @@ class KISSInterface(Interface):
         while not self.online:
             try:
                 time.sleep(5)
-                RNS.log("Attempting to reconnect serial port "+str(self.port)+" for "+str(self)+"...")
+                RNS.log("Attempting to reconnect serial port "+str(self.port)+" for "+str(self)+"...", RNS.LOG_VERBOSE)
                 self.open_port()
                 if self.serial.is_open:
                     self.configure_device()
             except Exception as e:
                 RNS.log("Error while reconnecting port, the contained exception was: "+str(e), RNS.LOG_ERROR)
 
+        RNS.log("Reconnected serial port for "+str(self))
+
     def __str__(self):
         return "KISSInterface["+self.name+"]"

RNS/Interfaces/RNodeInterface.py

@@ -82,6 +82,7 @@ class RNodeInterface(Interface):
         self.rxb = 0
         self.txb = 0
         
+        self.pyserial    = serial
         self.serial      = None
         self.owner       = owner
         self.name        = name
@@ -157,46 +158,53 @@ class RNodeInterface(Interface):
             raise ValueError("The configuration for "+str(self)+" contains errors, interface is offline")
 
         try:
-            RNS.log("Opening serial port "+self.port+"...")
+            self.open_port()
-            self.serial = serial.Serial(
-                port = self.port,
-                baudrate = self.speed,
-                bytesize = self.databits,
-                parity = self.parity,
-                stopbits = self.stopbits,
-                xonxoff = False,
-                rtscts = False,
-                timeout = 0,
-                inter_byte_timeout = None,
-                write_timeout = None,
-                dsrdtr = False,
-            )
         except Exception as e:
             RNS.log("Could not open serial port for interface "+str(self), RNS.LOG_ERROR)
             raise e
 
         if self.serial.is_open:
-            sleep(2.0)
+            self.configure_device()
-            thread = threading.Thread(target=self.readLoop)
-            thread.setDaemon(True)
-            thread.start()
-            self.online = True
-            RNS.log("Serial port "+self.port+" is now open")
-            RNS.log("Configuring RNode interface...", RNS.LOG_VERBOSE)
-            self.initRadio()
-            if (self.validateRadioState()):
-                self.interface_ready = True
-                RNS.log(str(self)+" is configured and powered up")
-                sleep(1.0)
-            else:
-                RNS.log("After configuring "+str(self)+", the reported radio parameters did not match your configuration.", RNS.LOG_ERROR)
-                RNS.log("Make sure that your hardware actually supports the parameters specified in the configuration", RNS.LOG_ERROR)
-                RNS.log("Aborting RNode startup", RNS.LOG_ERROR)
-                self.serial.close()
-                raise IOError("RNode interface did not pass validation")
         else:
             raise IOError("Could not open serial port")
 
+    def open_port(self):
+        RNS.log("Opening serial port "+self.port+"...")
+        self.serial = self.pyserial.Serial(
+            port = self.port,
+            baudrate = self.speed,
+            bytesize = self.databits,
+            parity = self.parity,
+            stopbits = self.stopbits,
+            xonxoff = False,
+            rtscts = False,
+            timeout = 0,
+            inter_byte_timeout = None,
+            write_timeout = None,
+            dsrdtr = False,
+        )
+
+
+    def configure_device(self):
+        sleep(2.0)
+        thread = threading.Thread(target=self.readLoop)
+        thread.setDaemon(True)
+        thread.start()
+        self.online = True
+        RNS.log("Serial port "+self.port+" is now open")
+        RNS.log("Configuring RNode interface...", RNS.LOG_VERBOSE)
+        self.initRadio()
+        if (self.validateRadioState()):
+            self.interface_ready = True
+            RNS.log(str(self)+" is configured and powered up")
+            sleep(1.0)
+        else:
+            RNS.log("After configuring "+str(self)+", the reported radio parameters did not match your configuration.", RNS.LOG_ERROR)
+            RNS.log("Make sure that your hardware actually supports the parameters specified in the configuration", RNS.LOG_ERROR)
+            RNS.log("Aborting RNode startup", RNS.LOG_ERROR)
+            self.serial.close()
+            raise IOError("RNode interface did not pass validation")
+            
 
     def initRadio(self):
         self.setFrequency()
@@ -478,11 +486,30 @@ class RNodeInterface(Interface):
         except Exception as e:
             self.online = False
             RNS.log("A serial port error occurred, the contained exception was: "+str(e), RNS.LOG_ERROR)
-            RNS.log("The interface "+str(self)+" experienced an unrecoverable error and is being torn down. Restart Reticulum to attempt to open this interface again.", RNS.LOG_ERROR)
+            RNS.log("The interface "+str(self)+" experienced an unrecoverable error and is now offline.", RNS.LOG_ERROR)
-
+            
             if RNS.Reticulum.panic_on_interface_error:
                 RNS.panic()
 
+            RNS.log("Reticulum will attempt to reconnect the interface periodically.", RNS.LOG_ERROR)
+
+        self.online = False
+        self.serial.close()
+        self.reconnect_port()
+
+    def reconnect_port(self):
+        while not self.online:
+            try:
+                time.sleep(5)
+                RNS.log("Attempting to reconnect serial port "+str(self.port)+" for "+str(self)+"...", RNS.LOG_VERBOSE)
+                self.open_port()
+                if self.serial.is_open:
+                    self.configure_device()
+            except Exception as e:
+                RNS.log("Error while reconnecting port, the contained exception was: "+str(e), RNS.LOG_ERROR)
+
+        RNS.log("Reconnected serial port for "+str(self))
+
     def __str__(self):
         return "RNodeInterface["+self.name+"]"
 

RNS/Interfaces/SerialInterface.py

@@ -41,6 +41,7 @@ class SerialInterface(Interface):
         self.rxb = 0
         self.txb = 0
         
+        self.pyserial = serial
         self.serial   = None
         self.owner    = owner
         self.name     = name
@@ -59,35 +60,43 @@ class SerialInterface(Interface):
             self.parity = serial.PARITY_ODD
 
         try:
-            RNS.log("Opening serial port "+self.port+"...")
+            self.open_port()
-            self.serial = serial.Serial(
-                port = self.port,
-                baudrate = self.speed,
-                bytesize = self.databits,
-                parity = self.parity,
-                stopbits = self.stopbits,
-                xonxoff = False,
-                rtscts = False,
-                timeout = 0,
-                inter_byte_timeout = None,
-                write_timeout = None,
-                dsrdtr = False,
-            )
         except Exception as e:
             RNS.log("Could not open serial port for interface "+str(self), RNS.LOG_ERROR)
             raise e
 
         if self.serial.is_open:
-            sleep(0.5)
+            self.configure_device()
-            thread = threading.Thread(target=self.readLoop)
-            thread.setDaemon(True)
-            thread.start()
-            self.online = True
-            RNS.log("Serial port "+self.port+" is now open")
         else:
             raise IOError("Could not open serial port")
 
 
+    def open_port(self):
+        RNS.log("Opening serial port "+self.port+"...", RNS.LOG_VERBOSE)
+        self.serial = self.pyserial.Serial(
+            port = self.port,
+            baudrate = self.speed,
+            bytesize = self.databits,
+            parity = self.parity,
+            stopbits = self.stopbits,
+            xonxoff = False,
+            rtscts = False,
+            timeout = 0,
+            inter_byte_timeout = None,
+            write_timeout = None,
+            dsrdtr = False,
+        )
+
+
+    def configure_device(self):
+        sleep(0.5)
+        thread = threading.Thread(target=self.readLoop)
+        thread.setDaemon(True)
+        thread.start()
+        self.online = True
+        RNS.log("Serial port "+self.port+" is now open")
+
+
     def processIncoming(self, data):
         self.rxb += len(data)            
         self.owner.inbound(data, self)
@@ -139,13 +148,33 @@ class SerialInterface(Interface):
                         in_frame = False
                         escape = False
                     sleep(0.08)
+                    
         except Exception as e:
             self.online = False
             RNS.log("A serial port error occurred, the contained exception was: "+str(e), RNS.LOG_ERROR)
-            RNS.log("The interface "+str(self)+" experienced an unrecoverable error and is being torn down. Restart Reticulum to attempt to open this interface again.", RNS.LOG_ERROR)
+            RNS.log("The interface "+str(self)+" experienced an unrecoverable error and is now offline.", RNS.LOG_ERROR)
-
+            
             if RNS.Reticulum.panic_on_interface_error:
                 RNS.panic()
 
+            RNS.log("Reticulum will attempt to reconnect the interface periodically.", RNS.LOG_ERROR)
+
+        self.online = False
+        self.serial.close()
+        self.reconnect_port()
+
+    def reconnect_port(self):
+        while not self.online:
+            try:
+                time.sleep(5)
+                RNS.log("Attempting to reconnect serial port "+str(self.port)+" for "+str(self)+"...", RNS.LOG_VERBOSE)
+                self.open_port()
+                if self.serial.is_open:
+                    self.configure_device()
+            except Exception as e:
+                RNS.log("Error while reconnecting port, the contained exception was: "+str(e), RNS.LOG_ERROR)
+
+        RNS.log("Reconnected serial port for "+str(self))
+
     def __str__(self):
         return "SerialInterface["+self.name+"]"