890 lines
48 KiB
ReStructuredText
890 lines
48 KiB
ReStructuredText
.. _understanding-main:
|
||
|
||
***********************
|
||
Understanding Reticulum
|
||
***********************
|
||
This chapter will briefly describe the overall purpose and operating principles of Reticulum.
|
||
It should give you an overview of how the stack works, and an understanding of how to
|
||
develop networked applications using Reticulum.
|
||
|
||
This chapter is not an exhaustive source of information on Reticulum, at least not yet. Currently,
|
||
the only complete repository, and final authority on how Reticulum actually functions, is the Python
|
||
reference implementation and API reference. That being said, this chapter is an essential resource in
|
||
understanding how Reticulum works from a high-level perspective, along with the general principles of
|
||
Reticulum, and how to apply them when creating your own networks or software.
|
||
|
||
After reading this document, you should be well-equipped to understand how a Reticulum network
|
||
operates, what it can achieve, and how you can use it yourself. If you want to help out with the
|
||
development, this is also the place to start, since it will provide a pretty clear overview of the
|
||
sentiments and the philosophy behind Reticulum, what problems it seeks to solve, and how it
|
||
approaches those solutions.
|
||
|
||
.. _understanding-motivation:
|
||
|
||
Motivation
|
||
==========
|
||
|
||
The primary motivation for designing and implementing Reticulum has been the current lack of
|
||
reliable, functional and secure minimal-infrastructure modes of digital communication. It is my
|
||
belief that it is highly desirable to create a reliable and efficient way to set up long-range digital
|
||
communication networks that can securely allow exchange of information between people and
|
||
machines, with no central point of authority, control, censorship or barrier to entry.
|
||
|
||
Almost all of the various networking systems in use today share a common limitation: They
|
||
require large amounts of coordination and centralised trust and power to function. To join such networks, you need approval
|
||
of gatekeepers in control. This need for coordination and trust inevitably leads to an environment of
|
||
central control, where it's very easy for infrastructure operators or governments to control or alter
|
||
traffic, and censor or persecute unwanted actors. It also makes it completely impossible to freely deploy
|
||
and use networks at will, like one would use other common tools that enhance individual agency and freedom.
|
||
|
||
Reticulum aims to require as little coordination and trust as possible. It aims to make secure,
|
||
anonymous and permissionless networking and information exchange a tool that anyone can just pick up and use.
|
||
|
||
Since Reticulum is completely medium agnostic, it can be used to build networks on whatever is best
|
||
suited to the situation, or whatever you have available. In some cases, this might be packet radio
|
||
links over VHF frequencies, in other cases it might be a 2.4 GHz
|
||
network using off-the-shelf radios, or it might be using common LoRa development boards.
|
||
|
||
At the time of release of this document, the fastest and easiest setup for development and testing is using
|
||
LoRa radio modules with an open source firmware (see the section :ref:`Reference Setup<understanding-referencesystem>`),
|
||
connected to any kind of computer or mobile device that Reticulum can run on.
|
||
|
||
The ultimate aim of Reticulum is to allow anyone to be their own network operator, and to make it
|
||
cheap and easy to cover vast areas with a myriad of independent, interconnectable and autonomous networks.
|
||
Reticulum **is not** *one network*, it **is a tool** to build *thousands of networks*. Networks without
|
||
kill-switches, surveillance, censorship and control. Networks that can freely interoperate, associate and disassociate
|
||
with each other, and require no central oversight. Networks for human beings. *Networks for the people*.
|
||
|
||
.. _understanding-goals:
|
||
|
||
Goals
|
||
=====
|
||
|
||
To be as widely usable and efficient to deploy as possible, the following goals have been used to
|
||
guide the design of Reticulum:
|
||
|
||
|
||
* **Fully useable as open source software stack**
|
||
Reticulum must be implemented with, and be able to run using only open source software. This is
|
||
critical to ensuring the availability, security and transparency of the system.
|
||
* **Hardware layer agnosticism**
|
||
Reticulum must be fully hardware agnostic, and shall be useable over a wide range of
|
||
physical networking layers, such as data radios, serial lines, modems, handheld transceivers,
|
||
wired ethernet, wifi, or anything else that can carry a digital data stream. Hardware made for
|
||
dedicated Reticulum use shall be as cheap as possible and use off-the-shelf components, so
|
||
it can be easily modified and replicated by anyone interested in doing so.
|
||
* **Very low bandwidth requirements**
|
||
Reticulum should be able to function reliably over links with a transmission capacity as low
|
||
as *500 bits per second*.
|
||
* **Encryption by default**
|
||
Reticulum must use strong encryption by default for all communication.
|
||
* **Initiator Anonymity**
|
||
It must be possible to communicate over a Reticulum network without revealing any identifying
|
||
information about oneself.
|
||
* **Unlicensed use**
|
||
Reticulum shall be functional over physical communication mediums that do not require any
|
||
form of license to use. Reticulum must be designed in a way, so it is usable over ISM radio
|
||
frequency bands, and can provide functional long distance links in such conditions, for example
|
||
by connecting a modem to a PMR or CB radio, or by using LoRa or WiFi modules.
|
||
* **Supplied software**
|
||
In addition to the core networking stack and API, that allows a developer to build
|
||
applications with Reticulum, a basic set of Reticulum-based communication tools must be
|
||
implemented and released along with Reticulum itself. These shall serve both as a
|
||
functional, basic communication suite, and as an example and learning resource to others wishing
|
||
to build applications with Reticulum.
|
||
* **Ease of use**
|
||
The reference implementation of Reticulum is written in Python, to make it easy to use
|
||
and understand. A programmer with only basic experience should be able to use
|
||
Reticulum to write networked applications.
|
||
* **Low cost**
|
||
It shall be as cheap as possible to deploy a communication system based on Reticulum. This
|
||
should be achieved by using cheap off-the-shelf hardware that potential users might already
|
||
own. The cost of setting up a functioning node should be less than $100 even if all parts
|
||
needs to be purchased.
|
||
|
||
.. _understanding-basicfunctionality:
|
||
|
||
Introduction & Basic Functionality
|
||
==================================
|
||
|
||
Reticulum is a networking stack suited for high-latency, low-bandwidth links. Reticulum is at it’s
|
||
core a *message oriented* system. It is suited for both local point-to-point or point-to-multipoint
|
||
scenarios where alle nodes are within range of each other, as well as scenarios where packets need
|
||
to be transported over multiple hops in a complex network to reach the recipient.
|
||
|
||
Reticulum does away with the idea of addresses and ports known from IP, TCP and UDP. Instead
|
||
Reticulum uses the singular concept of *destinations*. Any application using Reticulum as it’s
|
||
networking stack will need to create one or more destinations to receive data, and know the
|
||
destinations it needs to send data to.
|
||
|
||
All destinations in Reticulum are _represented_ as a 16 byte hash. This hash is derived from truncating a full
|
||
SHA-256 hash of identifying characteristics of the destination. To users, the destination addresses
|
||
will be displayed as 16 hexadecimal bytes, like this example: ``<13425ec15b621c1d928589718000d814>``.
|
||
|
||
The truncation size of 16 bytes (128 bits) for destinations has been choosen as a reasonable tradeoff
|
||
between address space
|
||
and packet overhead. The address space accomodated by this size can support many billions of
|
||
simultaneously active devices on the same network, while keeping packet overhead low, which is
|
||
essential on low-bandwidth networks. In the very unlikely case that this address space nears
|
||
congestion, a one-line code change can upgrade the Reticulum address space all the way up to 256
|
||
bits, ensuring the Reticulum address space could potentially support galactic-scale networks.
|
||
This is obviusly complete and ridiculous over-allocation, and as such, the current 128 bits should
|
||
be sufficient, even far into the future.
|
||
|
||
By default Reticulum encrypts all data using elliptic curve cryptography. Any packet sent to a
|
||
destination is encrypted with a derived ephemeral key. Reticulum can also set up an encrypted
|
||
channel to a destination, called a *Link*. Both data sent over Links and single packets offer
|
||
*Forward Secrecy* and *Initiator Anonymity*, by using an Elliptic Curve Diffie Hellman key exchange
|
||
on Curve25519 to derive ephemeral keys. The multi-hop transport, coordination, verification
|
||
and reliability layers are fully autonomous and also based on elliptic curve cryptography.
|
||
|
||
Reticulum also offers symmetric key encryption for group-oriented communications, as well as
|
||
unencrypted packets for local broadcast purposes.
|
||
|
||
Reticulum can connect to a variety of interfaces such as radio modems, data radios and serial ports,
|
||
and offers the possibility to easily tunnel Reticulum traffic over IP links such as the Internet or
|
||
private IP networks.
|
||
|
||
.. _understanding-destinations:
|
||
|
||
Destinations
|
||
------------
|
||
|
||
To receive and send data with the Reticulum stack, an application needs to create one or more
|
||
destinations. Reticulum uses three different basic destination types, and one special:
|
||
|
||
|
||
* **Single**
|
||
The *single* destination type is the most common type in Reticulum, and should be used for
|
||
most purposes. It is always identified by a unique public key. Any data sent to this
|
||
destination will be encrypted using ephemeral keys derived from an ECDH key exchange, and will
|
||
only be readable by the creator of the destination, who holds the corresponding private key.
|
||
* **Plain**
|
||
A *plain* destination type is unencrypted, and suited for traffic that should be broadcast to a
|
||
number of users, or should be readable by anyone. Traffic to a *plain* destination is not encrypted.
|
||
Generally, *plain* destinations can be used for broadcast information intended to be public.
|
||
Plain destinations are only reachable directly, and packets adressed to plain destinations are
|
||
never transported over multiple hops in the network. To be transportable over multiple hops in Reticulum, information
|
||
*must* be encrypted, since Reticulum uses the per-packet encryption to verify routing paths and
|
||
keep them alive.
|
||
* **Group**
|
||
The *group* special destination type, that defines a symmetrically encrypted virtual destination.
|
||
Data sent to this destination will be encrypted with a symmetric key, and will be readable by
|
||
anyone in possession of the key, but as with the *plain* destination type, packets to this type
|
||
of destination are not currently transported over multiple hops, although a planned upgrade
|
||
to Reticulum will allow globally reachable *group* destinations.
|
||
* **Link**
|
||
A *link* is a special destination type, that serves as an abstract channel to a *single*
|
||
destination, directly connected or over multiple hops. The *link* also offers reliability and
|
||
more efficient encryption, forward secrecy, initiator anonymity, and as such can be useful even
|
||
when a node is directly reachable. It also offers a more capable API and allows easily carrying
|
||
out requests and responses, large data transfers and more.
|
||
|
||
.. _understanding-destinationnaming:
|
||
|
||
Destination Naming
|
||
^^^^^^^^^^^^^^^^^^
|
||
|
||
Destinations are created and named in an easy to understand dotted notation of *aspects*, and
|
||
represented on the network as a hash of this value. The hash is a SHA-256 truncated to 128 bits. The
|
||
top level aspect should always be a unique identifier for the application using the destination.
|
||
The next levels of aspects can be defined in any way by the creator of the application.
|
||
|
||
Aspects can be as long and as plentiful as required, and a resulting long destination name will not
|
||
impact efficiency, as names are always represented as truncated SHA-256 hashes on the network.
|
||
|
||
As an example, a destination for a environmental monitoring application could be made up of the
|
||
application name, a device type and measurement type, like this:
|
||
|
||
.. code-block:: text
|
||
|
||
app name : environmentlogger
|
||
aspects : remotesensor, temperature
|
||
|
||
full name : environmentlogger.remotesensor.temperature
|
||
hash : 4faf1b2e0a077e6a9d92fa051f256038
|
||
|
||
For the *single* destination, Reticulum will automatically append the associated public key as a
|
||
destination aspect before hashing. This is done to ensure only the correct destination is reached,
|
||
since anyone can listen to any destination name. Appending the public key ensures that a given
|
||
packet is only directed at the destination that holds the corresponding private key to decrypt the
|
||
packet.
|
||
|
||
**Take note!** There is a very important concept to understand here:
|
||
|
||
* Anyone can use the destination name ``environmentlogger.remotesensor.temperature``
|
||
|
||
* Each destination that does so will still have a unique destination hash, and thus be uniquely
|
||
addressable, because their public keys will differ.
|
||
|
||
In actual use of *single* destination naming, it is advisable not to use any uniquely identifying
|
||
features in aspect naming. Aspect names should be general terms describing what kind of destination
|
||
is represented. The uniquely identifying aspect is always acheived by the appending the public key,
|
||
which expands the destination into a uniquely identifyable one. Reticulum does this automatically.
|
||
|
||
Any destination on a Reticulum network can be addressed and reached simply by knowning its
|
||
destination hash (and public key, but if the public key is not known, it can be requested from the
|
||
network simply by knowing the destination hash). The use of app names and aspects makes it easy to
|
||
structure Reticulum programs and makes it possible to filter what information and data your program
|
||
receives.
|
||
|
||
To recap, the different destination types should be used in the following situations:
|
||
|
||
* **Single**
|
||
When private communication between two endpoints is needed. Supports multiple hops.
|
||
* **Group**
|
||
When private communication between two or more endpoints is needed. Supports multiple hops
|
||
indirectly, but must first be established through a *single* destination.
|
||
* **Plain**
|
||
When plain-text communication is desirable, for example when broadcasting information, or for local discovery purposes.
|
||
|
||
To communicate with a *single* destination, you need to know it’s public key. Any method for
|
||
obtaining the public key is valid, but Reticulum includes a simple mechanism for making other
|
||
nodes aware of your destinations public key, called the *announce*. It is also possible to request
|
||
an unknown public key from the network, as all transport instances serve as a distributed ledger
|
||
of public keys.
|
||
|
||
Note that public key information can be shared and verified in other ways than using the
|
||
built-in *announce* functionality, and that it is therefore not required to use the *announce* and *path request*
|
||
functionality to obtain public keys. It is by far the easiest though, and should definitely be used
|
||
if there is not a very good reason for doing it differently.
|
||
|
||
.. _understanding-keyannouncements:
|
||
|
||
Public Key Announcements
|
||
------------------------
|
||
|
||
An *announce* will send a special packet over any relevant interfaces, containing all needed
|
||
information about the destination hash and public key, and can also contain some additional,
|
||
application specific data. The entire packet is signed by the sender to ensure authenticity. It is not
|
||
required to use the announce functionality, but in many cases it will be the simplest way to share
|
||
public keys on the network. The announce mechanism also serves to establish end-to-end connectivity
|
||
to the announced destination, as the announce propagates through the network.
|
||
|
||
As an example, an announce in a simple messenger application might contain the following information:
|
||
|
||
|
||
* The announcers destination hash
|
||
* The announcers public key
|
||
* Application specific data, in this case the users nickname and availability status
|
||
* A random blob, making each new announce unique
|
||
* An Ed25519 signature of the above information, verifying authenticity
|
||
|
||
With this information, any Reticulum node that receives it will be able to reconstruct an outgoing
|
||
destination to securely communicate with that destination. You might have noticed that there is one
|
||
piece of information lacking to reconstruct full knowledge of the announced destination, and that is
|
||
the aspect names of the destination. These are intentionally left out to save bandwidth, since they
|
||
will be implicit in almost all cases. The receiving application will already know them. If a destination
|
||
name is not entirely implicit, information can be included in the application specific data part that
|
||
will allow the receiver to infer the naming.
|
||
|
||
It is important to note that announces will be forwarded throughout the network according to a
|
||
certain pattern. This will be detailed in the section
|
||
:ref:`The Announce Mechanism in Detail<understanding-announce>`.
|
||
|
||
In Reticulum, destinations are allowed to move around the network at will. This is very different from
|
||
protocols such as IP, where an address is always expected to stay within the network segment it was assigned in.
|
||
This limitation does not exist in Reticulum, and any destination is *completely portable* over the entire topography
|
||
of the network, and *can even be moved to other Reticulum networks* than the one it was created in, and
|
||
still become reachable. To update it's reachability, a destination simply needs to send an announce on any
|
||
networks it is part of. After a short while, it will be globally reachable in the network.
|
||
|
||
Seeing how *single* destinations are always tied to a private/public key pair leads us to the next topic.
|
||
|
||
.. _understanding-identities:
|
||
|
||
Identities
|
||
----------
|
||
|
||
In Reticulum, an *identity* does not necessarily represent a personal identity, but is an abstraction that
|
||
can represent any kind of *verifiable entity*. This could very well be a person, but it could also be the
|
||
control interface of a machine, a program, robot, computer, sensor or something else entirely. In
|
||
general, any kind of agent that can act, or be acted upon, or store or manipulate information, can be
|
||
represented as an identity. An *identity* can be used to create any number of destinations.
|
||
|
||
A *single* destination will always have an *identity* tied to it, but not *plain* or *group*
|
||
destinations. Destinations and identities share a multilateral connection. You can create a
|
||
destination, and if it is not connected to an identity upon creation, it will just create a new one to use
|
||
automatically. This may be desirable in some situations, but often you will probably want to create
|
||
the identity first, and then use it to create new destinations.
|
||
|
||
As an example, we could use an identity to represent the user of a messaging application.
|
||
Destinations can then be created by this identity to allow communication to reach the user.
|
||
In all cases it is of great importance to store the private keys associated with any
|
||
Reticulum Identity securely and privately, since obtaining access to the identity keys equals
|
||
obtaining access and controlling reachability to any destinations created by that identity.
|
||
|
||
.. _understanding-gettingfurther:
|
||
|
||
Getting Further
|
||
---------------
|
||
|
||
The above functions and principles form the core of Reticulum, and would suffice to create
|
||
functional networked applications in local clusters, for example over radio links where all interested
|
||
nodes can directly hear each other. But to be truly useful, we need a way to direct traffic over multiple
|
||
hops in the network.
|
||
|
||
In the following sections, two concepts that allow this will be introduced, *paths* and *links*.
|
||
|
||
.. _understanding-transport:
|
||
|
||
Reticulum Transport
|
||
===================
|
||
|
||
The methods of routing used in traditional networks are fundamentally incompatible with the physical medium
|
||
types and circumstances that Reticulum was designed to handle. These mechanisms mostly assume trust at the physical layer,
|
||
and often needs a lot more bandwidth than Reticulum can assume is available. Since Reticulum is designed to
|
||
survive running over open radio spectrum, no such trust can be assumed, and bandwidth is often very limited.
|
||
|
||
To overcome such challenges, Reticulum’s *Transport* system uses asymmetric elliptic curve cryptography to
|
||
implement the concept of *paths* that allow discovery of how to get information closer to a certain
|
||
destination. It is important to note that no single node in a Reticulum network knows the complete
|
||
path to a destination. Every Transport node participating in a Reticulum network will only
|
||
know the most direct way to get a packet one hop closer to it's destination.
|
||
|
||
|
||
.. _understanding-nodetypes:
|
||
|
||
Node Types
|
||
----------
|
||
|
||
Currently, Reticulum distinguishes between two types of network nodes. All nodes on a Reticulum network
|
||
are *Reticulum Instances*, and some are alo *Transport Nodes*. If a system running Reticulum is fixed in
|
||
one place, and is intended to be kept available most of the time, it is a good contender to be a *Transport Node*.
|
||
|
||
Any Reticulum Instance can become a Transport Node by enabling it in the configuration.
|
||
This distinction is made by the user configuring the node, and is used to determine what nodes on the
|
||
network will help forward traffic, and what nodes rely on other nodes for wider connectivity.
|
||
|
||
If a node is an *Instance* it should be given the configuration directive ``enable_transport = No``, which
|
||
is the default setting.
|
||
|
||
If it is a *Transport Node*, it should be given the configuration directive ``enable_transport = Yes``.
|
||
|
||
|
||
.. _understanding-announce:
|
||
|
||
The Announce Mechanism in Detail
|
||
--------------------------------
|
||
|
||
When an *announce* for a destination is transmitted by from a Reticulum instance, it will be forwarded by
|
||
any transport node receiving it, but according to some specific rules:
|
||
|
||
|
||
* | If this exact announce has already been received before, ignore it.
|
||
|
||
* | If not, record into a table which Transport Node the announce was received from, and how many times in
|
||
total it has been retransmitted to get here.
|
||
|
||
* | If the announce has been retransmitted *m+1* times, it will not be forwarded any more. By default, *m* is
|
||
set to 128.
|
||
|
||
* | After a randomised delay, the announce will be retransmitted on all interfaces that have bandwidth
|
||
available for processing announces. By default, the maximum bandwidth allocation for processing
|
||
announces is set at 2%, but can be configured on a per-interface basis.
|
||
|
||
* | If any given interface does not have enough bandwidth available for retransmitting the announce,
|
||
the announce will be assigned a priority inversely proportional to it's hop count, and be inserted
|
||
into a queue managed by the interface.
|
||
|
||
* | When the interface has bandwidth available for processing an announce, it will prioritise announces
|
||
for destinations that are closest in terms of hops, thus prioritising reachability and connectivity
|
||
of local nodes, even on slow networks that connect to wider and faster networks.
|
||
|
||
* | After the announce has been re-transmitted, and if no other nodes are heard retransmitting the announce
|
||
with a greater hop count than when it left this node, transmitting it will be retried *r* times. By default,
|
||
*r* is set to 1.
|
||
|
||
* | If a newer announce from the same destination arrives, while an identical one is already waiting
|
||
to be transmitted, the newest announce is discarded. If the newest announce contains different
|
||
application specific data, it will replace the old announce.
|
||
|
||
Once an announce has reached a node in the network, any other node in direct contact with that
|
||
node will be able to reach the destination the announce originated from, simply by sending a packet
|
||
addressed to that destination. Any node with knowledge of the announce will be able to direct the
|
||
packet towards the destination by looking up the next node with the shortest amount of hops to the
|
||
destination.
|
||
|
||
According to these rules, an announce will propagate throughout the network in a predictable way,
|
||
and make the announced destination reachable in a short amount of time. Fast networks that have the
|
||
capacity to process many announces can reach full convergence very quickly, even when constantly adding
|
||
new destinations. Slower segments of such networks might take a bit longer to gain full knowledge about
|
||
the wide and fast networks they are connected to, but can still do so over time, while prioritising full
|
||
and quickly converging end-to-end connectivity for their local, slower segments.
|
||
|
||
In general, even extremely complex networks, that utilize the maximum 128 hops will converge to full
|
||
end-to-end connectivity in about one minute, given there is enough bandwidth available to process
|
||
the required amount of announces.
|
||
|
||
.. _understanding-paths:
|
||
|
||
Reaching the Destination
|
||
------------------------
|
||
|
||
In networks with changing topology and trustless connectivity, nodes need a way to establish
|
||
*verified connectivity* with each other. Since the network is assumed to be trustless, Reticulum
|
||
must provide a way to guarantee that the peer you are communicating with is actually who you
|
||
expect. Reticulum offers two ways to do this.
|
||
|
||
For exchanges of small amounts of information, Reticulum offers the *Packet* API, which works exactly like you would expect - on a per packet level. The following process is employed when sending a packet:
|
||
|
||
* | A packet is always created with an associated destination and some payload data. When the packet is sent
|
||
to a *single* destination type, Reticulum will automatically create an ephemeral encryption key, perform
|
||
an ECDH key exchange with the destinations public key, and encrypt the information.
|
||
|
||
* | It is important to note that this key exchange does not require any network traffic. The sender already
|
||
knows the public key of the destination from an earlier received *announce*, and can thus perform the ECDH
|
||
key exchange locally, before sending the packet.
|
||
|
||
* | The public part of the newly generated ephemeral key-pair is included with the encrypted token, and sent
|
||
along with the encrypted payload data in the packet.
|
||
|
||
* | When the destination receives the packet, it can itself perform an ECDH key exchange and decrypt the
|
||
packet.
|
||
|
||
* | A new ephemeral key is used for every packet sent in this way, and forward secrecy is guaranteed on a
|
||
per packet level.
|
||
|
||
* | Once the packet has been received and decrypted by the addressed destination, that destination can opt
|
||
to *prove* its receipt of the packet. It does this by calculating the SHA-256 hash of the received packet,
|
||
and signing this hash with it's Ed25519 signing key. Transport nodes in the network can then direct this
|
||
*proof* back to the packets origin, where the signature can be verified against the destinations known
|
||
public signing key.
|
||
|
||
* | In case the packet is addressed to a *group* destination type, the packet will be encrypted with the
|
||
pre-shared AES-128 key associated with the destination. In case the packet is addressed to a *plain*
|
||
destination type, the payload data will not be encrypted. Neither of these two destination types offer
|
||
forward secrecy. In general, it is recommended to always use the *single* destination type, unless it is
|
||
strictly necessary to use one of the others.
|
||
|
||
|
||
For exchanges of larger amounts of data, or when longer sessions of bidirectional communication is desired, Reticulum offers the *Link* API. To establish a *link*, the following process is employed:
|
||
|
||
* | First, the node that wishes to establish a link will send out a special packet, that
|
||
traverses the network and locates the desired destination. Along the way, the Transport Nodes that
|
||
forward the packet will take note of this *link request*.
|
||
|
||
* | Second, if the destination accepts the *link request* , it will send back a packet that proves the
|
||
authenticity of it’s identity (and the receipt of the link request) to the initiating node. All
|
||
nodes that initially forwarded the packet will also be able to verify this proof, and thus
|
||
accept the validity of the *link* throughout the network.
|
||
|
||
* | When the validity of the *link* has been accepted by forwarding nodes, these nodes will
|
||
remember the *link* , and it can subsequently be used by referring to a hash representing it.
|
||
|
||
* | As a part of the *link request*, an Elliptic Curve Diffie-Hellman key exchange takes place, that sets up an
|
||
efficiently encrypted tunnel between the two nodes. As such, this mode of communication is preferred,
|
||
even for situations when nodes can directly communicate, when the amount of data to be exchanged numbers
|
||
in the tens of packets, or whenever the use of the more advanced API functions is desired.
|
||
|
||
* | When a *link* has been set up, it automatically provides message receipt functionality, through
|
||
the same *proof* mechanism discussed before, so the sending node can obtain verified confirmation
|
||
that the information reached the intended recipient.
|
||
|
||
* | Once the *link* has been set up, the initiator can remain anonymous, or choose to authenticate towards
|
||
the destination using a Reticulum Identity. This authentication is happening inside the encrypted
|
||
link, and is only revealed to the verified destination, and no intermediaries.
|
||
|
||
In a moment, we will discuss the details of how this methodology is implemented, but let’s first
|
||
recap what purposes this methodology serves. We first ensure that the node answering our request
|
||
is actually the one we want to communicate with, and not a malicious actor pretending to be so.
|
||
At the same time we establish an efficient encrypted channel. The setup of this is relatively cheap in
|
||
terms of bandwidth, so it can be used just for a short exchange, and then recreated as needed, which will
|
||
also rotate encryption keys. The link can also be kept alive for longer periods of time, if this is
|
||
more suitable to the application. The procedure also inserts the *link id* , a hash calculated from the link request packet, into the memory of forwarding nodes, which means that the communicating nodes can thereafter reach each other simply by referring to this *link id*.
|
||
|
||
The combined bandwidth cost of setting up a link is 3 packets totalling 237 bytes (more info in the
|
||
:ref:`Binary Packet Format<understanding-packetformat>` section). The amount of bandwidth used on keeping
|
||
a link open is practically negligible, at 0.62 bits per second. Even on a slow 1200 bits per second packet
|
||
radio channel, 100 concurrent links will still leave 95% channel capacity for actual data.
|
||
|
||
|
||
Link Establishment in Detail
|
||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||
|
||
After exploring the basics of the announce mechanism, finding a path through the network, and an overview
|
||
of the link establishment procedure, this section will go into greater detail about the Reticulum link
|
||
establishment process.
|
||
|
||
The *link* in Reticulum terminology should not be viewed as a direct node-to-node link on the
|
||
physical layer, but as an abstract channel, that can be open for any amount of time, and can span
|
||
an arbitrary number of hops, where information will be exchanged between two nodes.
|
||
|
||
|
||
* | When a node in the network wants to establish verified connectivity with another node, it
|
||
will randomly generate a new X25519 private/public key pair. It then creates a *link request*
|
||
packet, and broadcast it.
|
||
|
|
||
| *It should be noted that the X25519 public/private keypair mentioned above is two separate keypairs:
|
||
An encryption key pair, used for derivation of a shared symmetric key, and a signing key pair, used
|
||
for signing and verifying messages on the link. They are sent together over the wire, and can be
|
||
considered as single public key for simplicity in this explanation.*
|
||
|
||
* | The *link request* is addressed to the destination hash of the desired destination, and
|
||
contains the following data: The newly generated X25519 public key *LKi*.
|
||
|
||
* | The broadcasted packet will be directed through the network according to the rules laid out
|
||
previously.
|
||
|
||
* | Any node that forwards the link request will store a *link id* in it’s *link table* , along with the
|
||
amount of hops the packet had taken when received. The link id is a hash of the entire link
|
||
request packet. If the link request packet is not *proven* by the addressed destination within some
|
||
set amount of time, the entry will be dropped from the *link table* again.
|
||
|
||
* | When the destination receives the link request packet, it will decide whether to accept the request.
|
||
If it is accepted, the destination will also generate a new X25519 private/public key pair, and
|
||
perform a Diffie Hellman Key Exchange, deriving a new symmetric key that will be used to encrypt the
|
||
channel, once it has been established.
|
||
|
||
* | A *link proof* packet is now constructed and transmitted over the network. This packet is
|
||
addressed to the *link id* of the *link*. It contains the following data: The newly generated X25519
|
||
public key *LKr* and an Ed25519 signature of the *link id* and *LKr* made by the signing key of
|
||
the addressed destination.
|
||
|
||
* | By verifying this *link proof* packet, all nodes that originally transported the *link request*
|
||
packet to the destination from the originator can now verify that the intended destination received
|
||
the request and accepted it, and that the path they chose for forwarding the request was valid.
|
||
In sucessfully carrying out this verification, the transporting nodes marks the link as active.
|
||
An abstract bi-directional communication channel has now been established along a path in the network.
|
||
|
||
* | When the source receives the *proof* , it will know unequivocally that a verified path has been
|
||
established to the destination. It can now also use the X25519 public key contained in the
|
||
*link proof* to perform it's own Diffie Hellman Key Exchange and derive the symmetric key
|
||
that is used to encrypt the channel. Information can now be exchanged reliably and securely.
|
||
|
||
|
||
It’s important to note that this methodology ensures that the source of the request does not need to
|
||
reveal any identifying information about itself. The link initiator remains completely anonymous.
|
||
|
||
When using *links*, Reticulum will automatically verify all data sent over the link, and can also
|
||
automate retransmissions if *Resources* are used.
|
||
|
||
.. _understanding-resources:
|
||
|
||
Resources
|
||
---------
|
||
|
||
For exchanging small amounts of data over a Reticulum network, the :ref:`Packet<api-packet>` interface
|
||
is sufficient, but for exchanging data that would require many packets, an efficient way to coordinate
|
||
the transfer is needed.
|
||
|
||
This is the purpose of the Reticulum :ref:`Resource<api-resource>`. A *Resource* can automatically
|
||
handle the reliable transfer of an arbitrary amount of data over an established :ref:`Link<api-link>`.
|
||
Resources can auto-compress data, will handle breaking the data into individual packets, sequencing
|
||
the transfer, integrity verification and reassembling the data on the other end.
|
||
|
||
:ref:`Resources<api-resource>` are programmatically very simple to use, and only requires a few lines
|
||
of codes to reliably transfer any amount of data. They can be used to transfer data stored in memory,
|
||
or stream data directly from files.
|
||
|
||
.. _understanding-referencesystem:
|
||
|
||
Reference Setup
|
||
======================
|
||
|
||
This section will detail a recommended *Reference Setup* for Reticulum. It is important to
|
||
note that Reticulum is designed to be usable on more or less any computing device, and over more
|
||
or less any medium that allows you to send and receive data, which satisfies some very low
|
||
minimum requirements.
|
||
|
||
The communication channel must support at least half-duplex operation, and provide an average
|
||
throughput of around 500 bits per second, and supports a physical layer MTU of 500 bytes. The
|
||
Reticulum stack should be able to run on more or less any hardware that can provide a Python 3.x
|
||
runtime environment.
|
||
|
||
That being said, this reference setup has been outlined to provide a common platform for anyone
|
||
who wants to help in the development of Reticulum, and for everyone who wants to know a
|
||
recommended setup to get started experimenting. A reference system consists of three parts:
|
||
|
||
* **An Interface Device**
|
||
Which provides access to the physical medium whereupon the communication
|
||
takes place, for example a radio with an integrated modem. A setup with a separate modem
|
||
connected to a radio would also be an interface device.
|
||
* **A Host Device**
|
||
Some sort of computing device that can run the necessary software, communicate with the
|
||
interface device, and provide user interaction.
|
||
* **A Software Stack**
|
||
The software implementing the Reticulum protocol and applications using it.
|
||
|
||
The reference setup can be considered a relatively stable platform to develop on, and also to start
|
||
building networks or applications on. While details of the implementation might change at the current stage of
|
||
development, it is the goal to maintain hardware compatibility for as long as entirely possible, and
|
||
the current reference setup has been determined to provide a functional platform for many years
|
||
into the future. The current Reference System Setup is as follows:
|
||
|
||
|
||
* **Interface Device**
|
||
A data radio consisting of a LoRa radio module, and a microcontroller with open source
|
||
firmware, that can connect to host devices via USB. It operates in either the 430, 868 or 900
|
||
MHz frequency bands. More details can be found on the `RNode Page <https://unsigned.io/rnode>`_.
|
||
* **Host Device**
|
||
Any computer device running Linux and Python. A Raspberry Pi with a Debian based OS is
|
||
recommended.
|
||
* **Software Stack**
|
||
The most recently released Python Implementation of Reticulum, running on a Debian based
|
||
operating system.
|
||
|
||
To avoid confusion, it is very important to note, that the reference interface device **does not**
|
||
use the LoRaWAN standard, but uses a custom MAC layer on top of the plain LoRa modulation! As such, you will
|
||
need a plain LoRa radio module connected to an controller with the correct firmware. Full details on how to
|
||
get or make such a device is available on the `RNode Page <https://unsigned.io/rnode>`_.
|
||
|
||
With the current reference setup, it should be possible to get on a Reticulum network for around 100$
|
||
even if you have none of the hardware already, and need to purchase everything.
|
||
|
||
This reference setup is of course just a recommendation for getting started easily, and you should
|
||
tailor it to your own specific needs, or whatever hardware you have available.
|
||
|
||
.. _understanding-protocolspecifics:
|
||
|
||
Protocol Specifics
|
||
==================
|
||
|
||
This chapter will detail protocol specific information that is essential to the implementation of
|
||
Reticulum, but non critical in understanding how the protocol works on a general level. It should be
|
||
treated more as a reference than as essential reading.
|
||
|
||
|
||
Packet Prioritisation
|
||
---------------------
|
||
|
||
Currently, Reticulum is completely priority-agnostic regarding general traffic. All traffic is handled
|
||
on a first-come, first-serve basis. Announce re-transmission are handled according to the re-transmission
|
||
times and priorities described earlier in this chapter.
|
||
|
||
|
||
Interface Access Codes
|
||
----------------------
|
||
|
||
Reticulum can create named virtual networks, and networks that are only accessible by knowing a preshared
|
||
passphrase. The configuration of this is detailed in the :ref:`Common Interface Options<interfaces-options>`
|
||
section. To implement these feature, Reticulum uses the concept of Interface Access Codes, that are calculated
|
||
and verified per packet.
|
||
|
||
An interface with a named virtual network or passphrase authentication enabled will derive a shared Ed25519
|
||
signing identity, and for every outbound packet generate a signature of the entire packet. This signature is
|
||
then inserted into the packet as an Interface Access Code before transmission. Depending on the speed and
|
||
capabilities of the interface, the IFAC can be the full 512-bit Ed25519 signature, or a truncated version.
|
||
Configured IFAC length can be inspected for all interfaces with the ``rnstatus`` utility.
|
||
|
||
Upon receipt, the interface will check that the signature matches the expected value, and drop the packet if it
|
||
does not. This ensures that only packets sent with the correct naming and/or passphrase parameters are allowed to
|
||
pass onto the network.
|
||
|
||
|
||
.. _understanding-packetformat:
|
||
|
||
Wire Format
|
||
-----------
|
||
|
||
.. code-block:: text
|
||
|
||
== Reticulum Wire Format ======
|
||
|
||
A Reticulum packet is composed of the following fields:
|
||
|
||
[HEADER 2 bytes] [ADDRESSES 16/32 bytes] [CONTEXT 1 byte] [DATA 0-465 bytes]
|
||
|
||
* The HEADER field is 2 bytes long.
|
||
* Byte 1: [IFAC Flag], [Header Type], [Propagation Type], [Destination Type] and [Packet Type]
|
||
* Byte 2: Number of hops
|
||
|
||
* Interface Access Code field if the IFAC flag was set.
|
||
* The length of the Interface Access Code can vary from
|
||
1 to 64 bytes according to physical interface
|
||
capabilities and configuration.
|
||
|
||
* The ADDRESSES field contains either 1 or 2 addresses.
|
||
* Each address is 16 bytes long.
|
||
* The Header Type flag in the HEADER field determines
|
||
whether the ADDRESSES field contains 1 or 2 addresses.
|
||
* Addresses are SHA-256 hashes truncated to 16 bytes.
|
||
|
||
* The CONTEXT field is 1 byte.
|
||
* It is used by Reticulum to determine packet context.
|
||
|
||
* The DATA field is between 0 and 465 bytes.
|
||
* It contains the packets data payload.
|
||
|
||
IFAC Flag
|
||
-----------------
|
||
open 0 Packet for publically accessible interface
|
||
authenticated 1 Interface authentication is included in packet
|
||
|
||
|
||
Header Types
|
||
-----------------
|
||
type 1 0 Two byte header, one 16 byte address field
|
||
type 2 1 Two byte header, two 16 byte address fields
|
||
|
||
|
||
Propagation Types
|
||
-----------------
|
||
broadcast 00
|
||
transport 01
|
||
reserved 10
|
||
reserved 11
|
||
|
||
|
||
Destination Types
|
||
-----------------
|
||
single 00
|
||
group 01
|
||
plain 10
|
||
link 11
|
||
|
||
|
||
Packet Types
|
||
-----------------
|
||
data 00
|
||
announce 01
|
||
link request 10
|
||
proof 11
|
||
|
||
|
||
+- Packet Example -+
|
||
|
||
HEADER FIELD DESTINATION FIELDS CONTEXT FIELD DATA FIELD
|
||
_______|_______ ________________|________________ ________|______ __|_
|
||
| | | | | | | |
|
||
01010000 00000100 [HASH1, 16 bytes] [HASH2, 16 bytes] [CONTEXT, 1 byte] [DATA]
|
||
|| | | | |
|
||
|| | | | +-- Hops = 4
|
||
|| | | +------- Packet Type = DATA
|
||
|| | +--------- Destination Type = SINGLE
|
||
|| +----------- Propagation Type = TRANSPORT
|
||
|+------------- Header Type = HEADER_2 (two byte header, two address fields)
|
||
+-------------- Access Codes = DISABLED
|
||
|
||
|
||
+- Packet Example -+
|
||
|
||
HEADER FIELD DESTINATION FIELD CONTEXT FIELD DATA FIELD
|
||
_______|_______ _______|_______ ________|______ __|_
|
||
| | | | | | | |
|
||
00000000 00000111 [HASH1, 16 bytes] [CONTEXT, 1 byte] [DATA]
|
||
|| | | | |
|
||
|| | | | +-- Hops = 0
|
||
|| | | +------- Packet Type = DATA
|
||
|| | +--------- Destination Type = SINGLE
|
||
|| +----------- Propagation Type = BROADCAST
|
||
|+------------- Header Type = HEADER_1 (two byte header, one address field)
|
||
+-------------- Access Codes = DISABLED
|
||
|
||
|
||
+- Packet Example -+
|
||
|
||
HEADER FIELD IFAC FIELD DESTINATION FIELD CONTEXT FIELD DATA FIELD
|
||
_______|_______ ______|______ _______|_______ ________|______ __|_
|
||
| | | | | | | | | |
|
||
10000000 00000111 [IFAC, N bytes] [HASH1, 16 bytes] [CONTEXT, 1 byte] [DATA]
|
||
|| | | | |
|
||
|| | | | +-- Hops = 0
|
||
|| | | +------- Packet Type = DATA
|
||
|| | +--------- Destination Type = SINGLE
|
||
|| +----------- Propagation Type = BROADCAST
|
||
|+------------- Header Type = HEADER_1 (two byte header, one address field)
|
||
+-------------- Access Codes = ENABLED
|
||
|
||
|
||
Size examples of different packet types
|
||
---------------------------------------
|
||
|
||
The following table lists example sizes of various
|
||
packet types. The size listed are the complete on-
|
||
wire size counting all fields including headers,
|
||
but excluding any interface access codes.
|
||
|
||
- Path Request : 33 bytes
|
||
- Announce : 151 bytes
|
||
- Link Request : 77 bytes
|
||
- Link Proof : 77 bytes
|
||
- Link RTT packet : 83 bytes
|
||
- Link keepalive : 14 bytes
|
||
|
||
|
||
.. _understanding-announcepropagation:
|
||
|
||
Announce Propagation Rules
|
||
--------------------------
|
||
|
||
The following table illustrates the rules for automatically propagating announces
|
||
from one interface type to another, for all possible combinations. For the purpose
|
||
of announce propagation, the *Full* and *Gateway* modes are identical.
|
||
|
||
.. image:: graphics/if_mode_graph_b.png
|
||
|
||
See the :ref:`Interface Modes<interfaces-modes>` section for a conceptual overview
|
||
of the different interface modes, and how they are configured.
|
||
|
||
..
|
||
(.. code-block:: text)
|
||
Full ────── ✓ ──┐ ┌── ✓ ── Full
|
||
AP ──────── ✓ ──┼───> Full >───┼── ✕ ── AP
|
||
Boundary ── ✓ ──┤ ├── ✓ ── Boundary
|
||
Roaming ─── ✓ ──┘ └── ✓ ── Roaming
|
||
|
||
Full ────── ✕ ──┐ ┌── ✓ ── Full
|
||
AP ──────── ✕ ──┼────> AP >────┼── ✕ ── AP
|
||
Boundary ── ✕ ──┤ ├── ✓ ── Boundary
|
||
Roaming ─── ✕ ──┘ └── ✓ ── Roaming
|
||
|
||
Full ────── ✓ ──┐ ┌── ✓ ── Full
|
||
AP ──────── ✓ ──┼─> Roaming >──┼── ✕ ── AP
|
||
Boundary ── ✕ ──┤ ├── ✕ ── Boundary
|
||
Roaming ─── ✕ ──┘ └── ✕ ── Roaming
|
||
|
||
Full ────── ✓ ──┐ ┌── ✓ ── Full
|
||
AP ──────── ✓ ──┼─> Boundary >─┼── ✕ ── AP
|
||
Boundary ── ✓ ──┤ ├── ✓ ── Boundary
|
||
Roaming ─── ✕ ──┘ └── ✕ ── Roaming
|
||
|
||
|
||
.. _understanding-primitives:
|
||
|
||
Cryptographic Primitives
|
||
------------------------
|
||
|
||
Reticulum has been designed to use a simple suite of efficient, strong and modern
|
||
cryptographic primitives, with widely available implementations that can be used
|
||
both on general-purpose CPUs and on microcontrollers. The necessary primitives are:
|
||
|
||
* Ed25519 for signatures
|
||
|
||
* X22519 for ECDH key exchanges
|
||
|
||
* HKDF for key derivation
|
||
|
||
* Fernet for encrypted tokens
|
||
|
||
* AES-128 in CBC mode
|
||
|
||
* HMAC for message authentication
|
||
|
||
* SHA-256
|
||
|
||
* SHA-512
|
||
|
||
In the default installation configuration, the ``X25519``, ``Ed25519`` and ``AES-128-CBC``
|
||
primitives are provided by `OpenSSL <https://www.openssl.org/>`_ (via the `PyCA/cryptography <https://github.com/pyca/cryptography>`_
|
||
package). The hashing functions ``SHA-256`` and ``SHA-512`` are provided by the standard
|
||
Python `hashlib <https://docs.python.org/3/library/hashlib.html>`_. The ``HKDF``, ``HMAC``,
|
||
``Fernet`` primitives, and the ``PKCS7`` padding function are always provided by the
|
||
following internal implementations:
|
||
|
||
- ``RNS/Cryptography/HKDF.py``
|
||
- ``RNS/Cryptography/HMAC.py``
|
||
- ``RNS/Cryptography/Fernet.py``
|
||
- ``RNS/Cryptography/PKCS7.py``
|
||
|
||
|
||
Reticulum also includes a complete implementation of all necessary primitives in pure Python.
|
||
If OpenSSL & PyCA are not available on the system when Reticulum is started, Reticulum will
|
||
instead use the internal pure-python primitives. A trivial consequence of this is performance,
|
||
with the OpenSSL backend being *much* faster. The most important consequence however, is the
|
||
potential loss of security by using primitives that has not seen the same amount of scrutiny,
|
||
testing and review as those from OpenSSL.
|
||
|
||
If you want to use the internal pure-python primitives, it is **highly advisable** that you
|
||
have a good understanding of the risks that this pose, and make an informed decision on whether
|
||
those risks are acceptable to you. |