arduino-esp32/tools/sdk/esp32c3/include/config/sdkconfig.h

629 lines
29 KiB
C
Raw Permalink Normal View History

2021-04-14 17:10:05 +02:00
/*
* Automatically generated file. DO NOT EDIT.
* Espressif IoT Development Framework (ESP-IDF) Configuration Header
*/
#pragma once
#define CONFIG_IDF_CMAKE 1
#define CONFIG_IDF_TARGET_ARCH_RISCV 1
#define CONFIG_IDF_TARGET "esp32c3"
#define CONFIG_IDF_TARGET_ESP32C3 1
#define CONFIG_IDF_FIRMWARE_CHIP_ID 0x0005
#define CONFIG_SDK_TOOLPREFIX "riscv32-esp-elf-"
#define CONFIG_APP_BUILD_TYPE_APP_2NDBOOT 1
#define CONFIG_APP_BUILD_GENERATE_BINARIES 1
#define CONFIG_APP_BUILD_BOOTLOADER 1
#define CONFIG_APP_BUILD_USE_FLASH_SECTIONS 1
#define CONFIG_APP_COMPILE_TIME_DATE 1
#define CONFIG_APP_RETRIEVE_LEN_ELF_SHA 16
#define CONFIG_BOOTLOADER_OFFSET_IN_FLASH 0x0
#define CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE 1
#define CONFIG_BOOTLOADER_LOG_LEVEL_INFO 1
#define CONFIG_BOOTLOADER_LOG_LEVEL 3
#define CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V 1
#define CONFIG_BOOTLOADER_WDT_ENABLE 1
#define CONFIG_BOOTLOADER_WDT_TIME_MS 9000
#define CONFIG_BOOTLOADER_RESERVE_RTC_SIZE 0x0
#define CONFIG_SECURE_BOOT_SUPPORTS_RSA 1
#define CONFIG_SECURE_TARGET_HAS_SECURE_ROM_DL_MODE 1
#define CONFIG_BOOT_ROM_LOG_ALWAYS_ON 1
#define CONFIG_ESPTOOLPY_BAUD_OTHER_VAL 115200
#define CONFIG_ESPTOOLPY_FLASHMODE_DIO 1
#define CONFIG_ESPTOOLPY_FLASHMODE "dio"
#define CONFIG_ESPTOOLPY_FLASHFREQ_80M 1
#define CONFIG_ESPTOOLPY_FLASHFREQ "80m"
#define CONFIG_ESPTOOLPY_FLASHSIZE_2MB 1
#define CONFIG_ESPTOOLPY_FLASHSIZE "2MB"
#define CONFIG_ESPTOOLPY_FLASHSIZE_DETECT 1
#define CONFIG_ESPTOOLPY_BEFORE_RESET 1
#define CONFIG_ESPTOOLPY_BEFORE "default_reset"
#define CONFIG_ESPTOOLPY_AFTER_RESET 1
#define CONFIG_ESPTOOLPY_AFTER "hard_reset"
#define CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B 1
#define CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL 115200
#define CONFIG_ESPTOOLPY_MONITOR_BAUD 115200
#define CONFIG_PARTITION_TABLE_SINGLE_APP 1
#define CONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv"
#define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv"
#define CONFIG_PARTITION_TABLE_OFFSET 0x8000
#define CONFIG_PARTITION_TABLE_MD5 1
#define CONFIG_ENABLE_ARDUINO_DEPENDS 1
#define CONFIG_AUTOSTART_ARDUINO 1
#define CONFIG_ARDUINO_RUN_CORE0 1
#define CONFIG_ARDUINO_RUNNING_CORE 0
#define CONFIG_ARDUINO_LOOP_STACK_SIZE 8192
#define CONFIG_ARDUINO_EVENT_RUN_CORE0 1
#define CONFIG_ARDUINO_EVENT_RUNNING_CORE 0
#define CONFIG_ARDUINO_UDP_RUN_CORE0 1
#define CONFIG_ARDUINO_UDP_TASK_PRIORITY 3
#define CONFIG_ARDUINO_UDP_RUNNING_CORE 0
#define CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_ERROR 1
#define CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL 1
#define CONFIG_ARDUHAL_PARTITION_SCHEME_DEFAULT 1
#define CONFIG_ARDUHAL_PARTITION_SCHEME "default"
#define CONFIG_COMPILER_OPTIMIZATION_DEFAULT 1
#define CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE 1
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
#define CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL 2
2021-04-14 17:10:05 +02:00
#define CONFIG_COMPILER_HIDE_PATHS_MACROS 1
#define CONFIG_COMPILER_STACK_CHECK_MODE_NONE 1
#define CONFIG_APPTRACE_DEST_NONE 1
#define CONFIG_APPTRACE_LOCK_ENABLE 1
#define CONFIG_BT_ENABLED 1
#define CONFIG_BT_CTRL_ESP32C3 1
#define CONFIG_BT_SOC_SUPPORT_5_0 1
#define CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF 0
#define CONFIG_BTDM_CTRL_PCM_ROLE_EFF 0
#define CONFIG_BTDM_CTRL_PCM_POLAR_EFF 0
#define CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF 0
#define CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF 0
#define CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF 0
#define CONFIG_BTDM_CTRL_PINNED_TO_CORE 0
#define CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF 1
#define CONFIG_BT_CTRL_MODE_EFF 1
#define CONFIG_BT_CTRL_BLE_MAX_ACT 10
#define CONFIG_BT_CTRL_BLE_MAX_ACT_EFF 10
#define CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB 0
#define CONFIG_BT_CTRL_PINNED_TO_CORE 0
#define CONFIG_BT_CTRL_HCI_MODE_VHCI 1
#define CONFIG_BT_CTRL_HCI_TL 1
#define CONFIG_BT_CTRL_ADV_DUP_FILT_MAX 30
#define CONFIG_BT_CTRL_HW_CCA_EFF 0
#define CONFIG_BT_CTRL_CE_LENGTH_TYPE_ORIG 1
#define CONFIG_BT_CTRL_CE_LENGTH_TYPE_EFF 0
#define CONFIG_BT_CTRL_TX_ANTENNA_INDEX_0 1
#define CONFIG_BT_CTRL_TX_ANTENNA_INDEX_EFF 0
#define CONFIG_BT_CTRL_RX_ANTENNA_INDEX_0 1
#define CONFIG_BT_CTRL_RX_ANTENNA_INDEX_EFF 0
#define CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P3 1
#define CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF 10
#define CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP 1
#define CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM 100
#define CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD 20
#define CONFIG_BT_CTRL_BLE_SCAN_DUPL 1
#define CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DEVICE 1
#define CONFIG_BT_CTRL_SCAN_DUPL_TYPE 0
#define CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE 100
#define CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_DIS 1
#define CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF 0
#define CONFIG_BT_CTRL_SLEEP_MODE_EFF 0
#define CONFIG_BT_CTRL_SLEEP_CLOCK_EFF 0
#define CONFIG_BT_CTRL_HCI_TL_EFF 1
#define CONFIG_BT_BLUEDROID_ENABLED 1
#define CONFIG_BT_BTC_TASK_STACK_SIZE 3072
#define CONFIG_BT_BLUEDROID_PINNED_TO_CORE 0
#define CONFIG_BT_BTU_TASK_STACK_SIZE 4096
#define CONFIG_BT_BLE_ENABLED 1
#define CONFIG_BT_GATTS_ENABLE 1
#define CONFIG_BT_BLE_BLUFI_ENABLE 1
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
#define CONFIG_BT_GATT_MAX_SR_PROFILES 8
2021-04-14 17:10:05 +02:00
#define CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO 1
#define CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE 0
#define CONFIG_BT_GATTC_ENABLE 1
#define CONFIG_BT_GATTC_CONNECT_RETRY_COUNT 3
2021-04-14 17:10:05 +02:00
#define CONFIG_BT_BLE_SMP_ENABLE 1
#define CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_HCI_TRACE_LEVEL 2
#define CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_BTM_TRACE_LEVEL 2
#define CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_L2CAP_TRACE_LEVEL 2
#define CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL 2
#define CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_SDP_TRACE_LEVEL 2
#define CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_GAP_TRACE_LEVEL 2
#define CONFIG_BT_LOG_BNEP_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_BNEP_TRACE_LEVEL 2
#define CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_PAN_TRACE_LEVEL 2
#define CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_A2D_TRACE_LEVEL 2
#define CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_AVDT_TRACE_LEVEL 2
#define CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_AVCT_TRACE_LEVEL 2
#define CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_AVRC_TRACE_LEVEL 2
#define CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_MCA_TRACE_LEVEL 2
#define CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_HID_TRACE_LEVEL 2
#define CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_APPL_TRACE_LEVEL 2
#define CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_GATT_TRACE_LEVEL 2
#define CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_SMP_TRACE_LEVEL 2
#define CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_BTIF_TRACE_LEVEL 2
#define CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_BTC_TRACE_LEVEL 2
#define CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_OSI_TRACE_LEVEL 2
#define CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING 1
#define CONFIG_BT_LOG_BLUFI_TRACE_LEVEL 2
#define CONFIG_BT_ACL_CONNECTIONS 4
#define CONFIG_BT_MULTI_CONNECTION_ENBALE 1
2021-04-14 17:10:05 +02:00
#define CONFIG_BT_SMP_ENABLE 1
#define CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT 30
#define CONFIG_BT_BLE_RPA_SUPPORTED 1
#define CONFIG_BT_BLE_50_FEATURES_SUPPORTED 1
#define CONFIG_BT_BLE_42_FEATURES_SUPPORTED 1
2021-04-14 17:10:05 +02:00
#define CONFIG_BT_RESERVE_DRAM 0xdb5c
#define CONFIG_BT_NIMBLE_ENABLE_CONN_REATTEMPT 1
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
#define CONFIG_BT_NIMBLE_USE_ESP_TIMER 1
2021-04-14 17:10:05 +02:00
#define CONFIG_COAP_MBEDTLS_PSK 1
#define CONFIG_COAP_LOG_DEFAULT_LEVEL 0
#define CONFIG_ADC_DISABLE_DAC 1
#define CONFIG_SPI_MASTER_ISR_IN_IRAM 1
#define CONFIG_SPI_SLAVE_ISR_IN_IRAM 1
#define CONFIG_EFUSE_MAX_BLK_LEN 256
#define CONFIG_ESP_TLS_USING_MBEDTLS 1
#define CONFIG_ESP_TLS_USE_DS_PERIPHERAL 1
#define CONFIG_ESP_TLS_SERVER 1
#define CONFIG_ESP32C3_DEFAULT_CPU_FREQ_160 1
#define CONFIG_ESP32C3_DEFAULT_CPU_FREQ_MHZ 160
#define CONFIG_ESP32C3_REV_MIN_0 1
#define CONFIG_ESP32C3_REV_MIN 0
#define CONFIG_ESP32C3_DEBUG_OCDAWARE 1
#define CONFIG_ESP32C3_BROWNOUT_DET 1
#define CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_7 1
#define CONFIG_ESP32C3_BROWNOUT_DET_LVL 7
#define CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC_SYSTIMER 1
#define CONFIG_ESP32C3_RTC_CLK_SRC_INT_RC 1
#define CONFIG_ESP32C3_RTC_CLK_CAL_CYCLES 576
#define CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND 1
#define CONFIG_ESP_ERR_TO_NAME_LOOKUP 1
#define CONFIG_ETH_ENABLED 1
#define CONFIG_ETH_USE_SPI_ETHERNET 1
#define CONFIG_ESP_EVENT_POST_FROM_ISR 1
#define CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR 1
#define CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS 1
#define CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH 1
#define CONFIG_HTTPD_MAX_REQ_HDR_LEN 512
#define CONFIG_HTTPD_MAX_URI_LEN 512
#define CONFIG_HTTPD_ERR_RESP_NO_DELAY 1
#define CONFIG_HTTPD_PURGE_BUF_LEN 32
#define CONFIG_HTTPD_WS_SUPPORT 1
#define CONFIG_ESP_HTTPS_SERVER_ENABLE 1
#define CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA 1
#define CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP 1
#define CONFIG_ESP_MAC_ADDR_UNIVERSE_BT 1
#define CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH 1
#define CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES_FOUR 1
#define CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES 4
#define CONFIG_ESP_SLEEP_POWER_DOWN_FLASH 1
2021-04-14 17:10:05 +02:00
#define CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL 120
#define CONFIG_ESP_NETIF_TCPIP_LWIP 1
#define CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER 1
#define CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE 1
#define CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER 20
#define CONFIG_ESP32_PHY_MAX_TX_POWER 20
#define CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP 1
2021-04-14 17:10:05 +02:00
#define CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT 1
#define CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE 1
#define CONFIG_ESP_SYSTEM_RTC_FAST_MEM_AS_HEAP_DEPCHECK 1
#define CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP 1
#define CONFIG_ESP_SYSTEM_MEMPROT_FEATURE 1
#define CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK 1
#define CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE 32
#define CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE 2304
#define CONFIG_ESP_MAIN_TASK_STACK_SIZE 3584
#define CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0 1
#define CONFIG_ESP_MAIN_TASK_AFFINITY 0x0
#define CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE 2048
#define CONFIG_ESP_CONSOLE_UART_DEFAULT 1
#define CONFIG_ESP_CONSOLE_UART 1
#define CONFIG_ESP_CONSOLE_UART_NUM 0
#define CONFIG_ESP_CONSOLE_UART_BAUDRATE 115200
#define CONFIG_ESP_INT_WDT 1
#define CONFIG_ESP_INT_WDT_TIMEOUT_MS 300
#define CONFIG_ESP_TASK_WDT 1
#define CONFIG_ESP_TASK_WDT_TIMEOUT_S 5
#define CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 1
#define CONFIG_ESP_IPC_TASK_STACK_SIZE 1024
#define CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER 1
#define CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER 1
#define CONFIG_ESP_TIMER_TASK_STACK_SIZE 3584
#define CONFIG_ESP_TIMER_INTERRUPT_LEVEL 1
#define CONFIG_ESP_TIMER_IMPL_SYSTIMER 1
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
#define CONFIG_ESP32_WIFI_ENABLED 1
2021-04-14 17:10:05 +02:00
#define CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE 1
#define CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM 10
#define CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM 32
#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER 1
#define CONFIG_ESP32_WIFI_TX_BUFFER_TYPE 1
#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM 32
#define CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED 1
#define CONFIG_ESP32_WIFI_TX_BA_WIN 6
#define CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED 1
#define CONFIG_ESP32_WIFI_RX_BA_WIN 6
#define CONFIG_ESP32_WIFI_NVS_ENABLED 1
#define CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN 752
#define CONFIG_ESP32_WIFI_MGMT_SBUF_NUM 32
#define CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE 1
#define CONFIG_ESP_WIFI_FTM_ENABLE 1
#define CONFIG_ESP_WIFI_FTM_INITIATOR_SUPPORT 1
#define CONFIG_ESP_WIFI_FTM_RESPONDER_SUPPORT 1
2021-04-14 17:10:05 +02:00
#define CONFIG_ESP_COREDUMP_ENABLE_TO_NONE 1
#define CONFIG_FATFS_CODEPAGE_437 1
#define CONFIG_FATFS_CODEPAGE 437
#define CONFIG_FATFS_LFN_HEAP 1
#define CONFIG_FATFS_MAX_LFN 255
#define CONFIG_FATFS_API_ENCODING_ANSI_OEM 1
#define CONFIG_FATFS_FS_LOCK 0
#define CONFIG_FATFS_TIMEOUT_MS 10000
#define CONFIG_FATFS_PER_FILE_CACHE 1
#define CONFIG_FMB_COMM_MODE_TCP_EN 1
#define CONFIG_FMB_TCP_PORT_DEFAULT 502
#define CONFIG_FMB_TCP_PORT_MAX_CONN 5
#define CONFIG_FMB_TCP_CONNECTION_TOUT_SEC 20
#define CONFIG_FMB_COMM_MODE_RTU_EN 1
#define CONFIG_FMB_COMM_MODE_ASCII_EN 1
#define CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND 150
#define CONFIG_FMB_MASTER_DELAY_MS_CONVERT 200
#define CONFIG_FMB_QUEUE_LENGTH 20
#define CONFIG_FMB_PORT_TASK_STACK_SIZE 4096
#define CONFIG_FMB_SERIAL_BUF_SIZE 256
#define CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB 8
#define CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS 1000
#define CONFIG_FMB_PORT_TASK_PRIO 10
#define CONFIG_FMB_PORT_TASK_AFFINITY 0x7FFFFFFF
2021-04-14 17:10:05 +02:00
#define CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT 1
#define CONFIG_FMB_CONTROLLER_SLAVE_ID 0x00112233
#define CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT 20
#define CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE 20
#define CONFIG_FMB_CONTROLLER_STACK_SIZE 4096
#define CONFIG_FMB_EVENT_QUEUE_TIMEOUT 20
#define CONFIG_FMB_TIMER_PORT_ENABLED 1
#define CONFIG_FMB_TIMER_GROUP 0
#define CONFIG_FMB_TIMER_INDEX 0
#define CONFIG_FREERTOS_UNICORE 1
#define CONFIG_FREERTOS_NO_AFFINITY 0x7FFFFFFF
#define CONFIG_FREERTOS_CORETIMER_0 1
#define CONFIG_FREERTOS_OPTIMIZED_SCHEDULER 1
#define CONFIG_FREERTOS_HZ 1000
#define CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION 1
#define CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY 1
#define CONFIG_FREERTOS_INTERRUPT_BACKTRACE 1
#define CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1
#define CONFIG_FREERTOS_ASSERT_FAIL_ABORT 1
#define CONFIG_FREERTOS_IDLE_TASK_STACKSIZE 2304
#define CONFIG_FREERTOS_ISR_STACKSIZE 1536
#define CONFIG_FREERTOS_MAX_TASK_NAME_LEN 16
#define CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION 1
#define CONFIG_FREERTOS_TIMER_TASK_PRIORITY 1
#define CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH 2048
#define CONFIG_FREERTOS_TIMER_QUEUE_LENGTH 10
#define CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE 0
#define CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER 1
#define CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER 1
#define CONFIG_FREERTOS_DEBUG_OCDAWARE 1
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
#define CONFIG_HAL_ASSERTION_EQUALS_SYSTEM 1
#define CONFIG_HAL_DEFAULT_ASSERTION_LEVEL 2
2021-04-14 17:10:05 +02:00
#define CONFIG_HEAP_POISONING_DISABLED 1
#define CONFIG_HEAP_TRACING_OFF 1
#define CONFIG_LOG_DEFAULT_LEVEL_ERROR 1
#define CONFIG_LOG_DEFAULT_LEVEL 1
#define CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT 1
#define CONFIG_LOG_MAXIMUM_LEVEL 1
2021-04-14 17:10:05 +02:00
#define CONFIG_LOG_TIMESTAMP_SOURCE_RTOS 1
#define CONFIG_LWIP_LOCAL_HOSTNAME "espressif"
#define CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES 1
#define CONFIG_LWIP_TIMERS_ONDEMAND 1
#define CONFIG_LWIP_MAX_SOCKETS 10
#define CONFIG_LWIP_SO_REUSE 1
#define CONFIG_LWIP_SO_REUSE_RXTOALL 1
#define CONFIG_LWIP_SO_RCVBUF 1
#define CONFIG_LWIP_IP4_FRAG 1
#define CONFIG_LWIP_IP6_FRAG 1
#define CONFIG_LWIP_ESP_GRATUITOUS_ARP 1
#define CONFIG_LWIP_GARP_TMR_INTERVAL 60
#define CONFIG_LWIP_TCPIP_RECVMBOX_SIZE 32
#define CONFIG_LWIP_DHCP_DOES_ARP_CHECK 1
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
#define CONFIG_LWIP_DHCPS 1
2021-04-14 17:10:05 +02:00
#define CONFIG_LWIP_DHCPS_LEASE_UNIT 60
#define CONFIG_LWIP_DHCPS_MAX_STATION_NUM 8
#define CONFIG_LWIP_IPV6 1
#define CONFIG_LWIP_IPV6_NUM_ADDRESSES 3
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
#define CONFIG_LWIP_IPV6_RDNSS_MAX_DNS_SERVERS 0
2021-04-14 17:10:05 +02:00
#define CONFIG_LWIP_NETIF_LOOPBACK 1
#define CONFIG_LWIP_LOOPBACK_MAX_PBUFS 8
#define CONFIG_LWIP_MAX_ACTIVE_TCP 16
#define CONFIG_LWIP_MAX_LISTENING_TCP 16
#define CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION 1
#define CONFIG_LWIP_TCP_MAXRTX 12
#define CONFIG_LWIP_TCP_SYNMAXRTX 12
#define CONFIG_LWIP_TCP_MSS 1440
#define CONFIG_LWIP_TCP_TMR_INTERVAL 250
#define CONFIG_LWIP_TCP_MSL 60000
#define CONFIG_LWIP_TCP_SND_BUF_DEFAULT 5744
#define CONFIG_LWIP_TCP_WND_DEFAULT 5744
#define CONFIG_LWIP_TCP_RECVMBOX_SIZE 6
#define CONFIG_LWIP_TCP_QUEUE_OOSEQ 1
#define CONFIG_LWIP_TCP_OVERSIZE_MSS 1
#define CONFIG_LWIP_TCP_RTO_TIME 1500
#define CONFIG_LWIP_MAX_UDP_PCBS 16
#define CONFIG_LWIP_UDP_RECVMBOX_SIZE 6
#define CONFIG_LWIP_CHECKSUM_CHECK_ICMP 1
#define CONFIG_LWIP_TCPIP_TASK_STACK_SIZE 3072
#define CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY 1
#define CONFIG_LWIP_TCPIP_TASK_AFFINITY 0x7FFFFFFF
#define CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE 3
#define CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS 5
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
#define CONFIG_LWIP_ICMP 1
2021-04-14 17:10:05 +02:00
#define CONFIG_LWIP_MAX_RAW_PCBS 16
#define CONFIG_LWIP_DHCP_MAX_NTP_SERVERS 1
#define CONFIG_LWIP_SNTP_UPDATE_DELAY 3600000
#define CONFIG_LWIP_ESP_LWIP_ASSERT 1
#define CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT 1
#define CONFIG_LWIP_HOOK_IP6_ROUTE_NONE 1
#define CONFIG_LWIP_HOOK_ND6_GET_GW_NONE 1
2021-04-14 17:10:05 +02:00
#define CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE 1
#define CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC 1
#define CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN 1
#define CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN 16384
#define CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN 4096
#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE 1
#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL 1
#define CONFIG_MBEDTLS_HARDWARE_AES 1
#define CONFIG_MBEDTLS_AES_USE_INTERRUPT 1
2021-04-14 17:10:05 +02:00
#define CONFIG_MBEDTLS_HARDWARE_MPI 1
#define CONFIG_MBEDTLS_HARDWARE_SHA 1
#define CONFIG_MBEDTLS_ROM_MD5 1
2021-04-14 17:10:05 +02:00
#define CONFIG_MBEDTLS_HAVE_TIME 1
#define CONFIG_MBEDTLS_ECDSA_DETERMINISTIC 1
#define CONFIG_MBEDTLS_SHA512_C 1
#define CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT 1
#define CONFIG_MBEDTLS_TLS_SERVER 1
#define CONFIG_MBEDTLS_TLS_CLIENT 1
#define CONFIG_MBEDTLS_TLS_ENABLED 1
#define CONFIG_MBEDTLS_PSK_MODES 1
#define CONFIG_MBEDTLS_KEY_EXCHANGE_PSK 1
#define CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_PSK 1
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_PSK 1
#define CONFIG_MBEDTLS_KEY_EXCHANGE_RSA_PSK 1
#define CONFIG_MBEDTLS_KEY_EXCHANGE_RSA 1
#define CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA 1
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE 1
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA 1
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA 1
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA 1
#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA 1
#define CONFIG_MBEDTLS_SSL_RENEGOTIATION 1
#define CONFIG_MBEDTLS_SSL_PROTO_TLS1 1
#define CONFIG_MBEDTLS_SSL_PROTO_TLS1_1 1
#define CONFIG_MBEDTLS_SSL_PROTO_TLS1_2 1
#define CONFIG_MBEDTLS_SSL_ALPN 1
#define CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS 1
#define CONFIG_MBEDTLS_X509_CHECK_KEY_USAGE 1
#define CONFIG_MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE 1
2021-04-14 17:10:05 +02:00
#define CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS 1
#define CONFIG_MBEDTLS_AES_C 1
#define CONFIG_MBEDTLS_CAMELLIA_C 1
#define CONFIG_MBEDTLS_RC4_DISABLED 1
#define CONFIG_MBEDTLS_CCM_C 1
#define CONFIG_MBEDTLS_GCM_C 1
#define CONFIG_MBEDTLS_PEM_PARSE_C 1
#define CONFIG_MBEDTLS_PEM_WRITE_C 1
#define CONFIG_MBEDTLS_X509_CRL_PARSE_C 1
#define CONFIG_MBEDTLS_X509_CSR_PARSE_C 1
#define CONFIG_MBEDTLS_ECP_C 1
#define CONFIG_MBEDTLS_ECDH_C 1
#define CONFIG_MBEDTLS_ECDSA_C 1
#define CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED 1
#define CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED 1
#define CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED 1
#define CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED 1
#define CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED 1
#define CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED 1
#define CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED 1
#define CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED 1
#define CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED 1
#define CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED 1
#define CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED 1
#define CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED 1
#define CONFIG_MBEDTLS_ECP_NIST_OPTIM 1
#define CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI 1
#define CONFIG_MDNS_MAX_SERVICES 10
#define CONFIG_MDNS_TASK_PRIORITY 1
#define CONFIG_MDNS_TASK_STACK_SIZE 4096
#define CONFIG_MDNS_TASK_AFFINITY_CPU0 1
#define CONFIG_MDNS_TASK_AFFINITY 0x0
#define CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS 2000
#define CONFIG_MDNS_TIMER_PERIOD_MS 100
#define CONFIG_MQTT_PROTOCOL_311 1
#define CONFIG_MQTT_TRANSPORT_SSL 1
#define CONFIG_MQTT_TRANSPORT_WEBSOCKET 1
#define CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE 1
#define CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF 1
#define CONFIG_NEWLIB_STDIN_LINE_ENDING_CR 1
#define CONFIG_OPENSSL_ERROR_STACK 1
#define CONFIG_OPENSSL_ASSERT_EXIT 1
#define CONFIG_PTHREAD_TASK_PRIO_DEFAULT 5
#define CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT 3072
#define CONFIG_PTHREAD_STACK_MIN 768
#define CONFIG_PTHREAD_TASK_CORE_DEFAULT -1
#define CONFIG_PTHREAD_TASK_NAME_DEFAULT "pthread"
#define CONFIG_SPI_FLASH_ROM_DRIVER_PATCH 1
#define CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS 1
#define CONFIG_SPI_FLASH_YIELD_DURING_ERASE 1
#define CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS 20
#define CONFIG_SPI_FLASH_ERASE_YIELD_TICKS 1
#define CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE 8192
#define CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP 1
#define CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP 1
#define CONFIG_SPI_FLASH_SUPPORT_GD_CHIP 1
#define CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP 1
#define CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP 1
#define CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE 1
#define CONFIG_SPIFFS_MAX_PARTITIONS 3
#define CONFIG_SPIFFS_CACHE 1
#define CONFIG_SPIFFS_CACHE_WR 1
#define CONFIG_SPIFFS_PAGE_CHECK 1
#define CONFIG_SPIFFS_GC_MAX_RUNS 10
#define CONFIG_SPIFFS_PAGE_SIZE 256
#define CONFIG_SPIFFS_OBJ_NAME_LEN 32
#define CONFIG_SPIFFS_USE_MAGIC 1
#define CONFIG_SPIFFS_USE_MAGIC_LENGTH 1
#define CONFIG_SPIFFS_META_LENGTH 4
#define CONFIG_SPIFFS_USE_MTIME 1
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
#define CONFIG_WS_TRANSPORT 1
2021-04-14 17:10:05 +02:00
#define CONFIG_WS_BUFFER_SIZE 1024
#define CONFIG_UNITY_ENABLE_FLOAT 1
#define CONFIG_UNITY_ENABLE_DOUBLE 1
#define CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER 1
#define CONFIG_VFS_SUPPORT_IO 1
#define CONFIG_VFS_SUPPORT_DIR 1
#define CONFIG_VFS_SUPPORT_SELECT 1
#define CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT 1
#define CONFIG_VFS_SUPPORT_TERMIOS 1
#define CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS 1
#define CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN 128
#define CONFIG_WL_SECTOR_SIZE_4096 1
#define CONFIG_WL_SECTOR_SIZE 4096
#define CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES 16
#define CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT 30
#define CONFIG_WPA_MBEDTLS_CRYPTO 1
#define CONFIG_LITTLEFS_MAX_PARTITIONS 3
#define CONFIG_LITTLEFS_PAGE_SIZE 256
#define CONFIG_LITTLEFS_OBJ_NAME_LEN 64
#define CONFIG_LITTLEFS_READ_SIZE 128
#define CONFIG_LITTLEFS_WRITE_SIZE 128
#define CONFIG_LITTLEFS_LOOKAHEAD_SIZE 128
#define CONFIG_LITTLEFS_CACHE_SIZE 512
#define CONFIG_LITTLEFS_BLOCK_CYCLES 512
#define CONFIG_LITTLEFS_USE_MTIME 1
#define CONFIG_LITTLEFS_MTIME_USE_SECONDS 1
/* List of deprecated options */
#define CONFIG_A2D_TRACE_LEVEL_WARNING CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING
#define CONFIG_ADC2_DISABLE_DAC CONFIG_ADC_DISABLE_DAC
#define CONFIG_APPL_TRACE_LEVEL_WARNING CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING
#define CONFIG_AVCT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING
#define CONFIG_AVDT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING
#define CONFIG_AVRC_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING
#define CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT
#define CONFIG_BLE_SMP_ENABLE CONFIG_BT_BLE_SMP_ENABLE
#define CONFIG_BLUEDROID_ENABLED CONFIG_BT_BLUEDROID_ENABLED
#define CONFIG_BLUFI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING
#define CONFIG_BTC_TASK_STACK_SIZE CONFIG_BT_BTC_TASK_STACK_SIZE
#define CONFIG_BTC_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING
#define CONFIG_BTIF_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING
#define CONFIG_BTM_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING
#define CONFIG_BTU_TASK_STACK_SIZE CONFIG_BT_BTU_TASK_STACK_SIZE
#define CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG CONFIG_COMPILER_OPTIMIZATION_DEFAULT
#define CONFIG_CONSOLE_UART_DEFAULT CONFIG_ESP_CONSOLE_UART_DEFAULT
#define CONFIG_ESP32C3_MEMPROT_FEATURE CONFIG_ESP_SYSTEM_MEMPROT_FEATURE
#define CONFIG_ESP32C3_MEMPROT_FEATURE_LOCK CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK
IDF master d93887f9f (#5336) * Update toolchain * Update package_esp32_index.template.json * add optional component dependencies after Kconfig options are known (#5404) Until this commit, Kconfig options (e.g. CONFIG_TINYUSB_ENABLED) were used in conditions preceding idf_component_register to determine which components need to be added to `arduino` component requirements. However the Kconfig options aren't known at the early expansion stage, when the component CMakeLists.txt files are expanded the first time and requirements are evaluated. So all the conditions evaluated as if the options were not set. This commit changes the logic to only add these components as dependencies when the Kconfig options are known. Dependencies become "weak", which means that if one of the components isn't included into the build for some reason, it is not added as a dependency. This may happen, for example, if the component is not present in the `components` directory or is excluded by setting `COMPONENTS` variable in the project CMakeLists.txt file. This also ensures that if the component is not present, it will not be added as a dependency, and this will allow the build to proceed. Follow-up to https://github.com/espressif/arduino-esp32/pull/5391. Closes https://github.com/espressif/arduino-esp32/issues/5319. * IDF master d93887f9f * PlatformIO updates for CI (#5387) * Update PlatformIO CI build script - Switch to the latest toolchains 8.4.0 for ESP32, ESP32S2, ESP32C3 - Use PlatformIO from master branch for better robustness * Update package.json for PlatformIO Co-authored-by: Ivan Grokhotkov <ivan@espressif.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
2021-07-17 00:57:49 +02:00
#define CONFIG_ESP32H2_MEMPROT_FEATURE CONFIG_ESP_SYSTEM_MEMPROT_FEATURE
#define CONFIG_ESP32H2_MEMPROT_FEATURE_LOCK CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK
2021-04-14 17:10:05 +02:00
#define CONFIG_ESP32S2_ALLOW_RTC_FAST_MEM_AS_HEAP CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP
#define CONFIG_ESP32S2_MEMPROT_FEATURE CONFIG_ESP_SYSTEM_MEMPROT_FEATURE
#define CONFIG_ESP32S2_MEMPROT_FEATURE_LOCK CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK
#define CONFIG_ESP32S2_PANIC_PRINT_REBOOT CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT
#define CONFIG_ESP32_ALLOW_RTC_FAST_MEM_AS_HEAP CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP
#define CONFIG_ESP32_APPTRACE_DEST_NONE CONFIG_APPTRACE_DEST_NONE
#define CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE CONFIG_ESP_COREDUMP_ENABLE_TO_NONE
#define CONFIG_ESP32_PANIC_PRINT_REBOOT CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT
#define CONFIG_ESP32_PTHREAD_STACK_MIN CONFIG_PTHREAD_STACK_MIN
#define CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT CONFIG_PTHREAD_TASK_NAME_DEFAULT
#define CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT CONFIG_PTHREAD_TASK_PRIO_DEFAULT
#define CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT
#define CONFIG_ESP_GRATUITOUS_ARP CONFIG_LWIP_ESP_GRATUITOUS_ARP
#define CONFIG_ESP_SYSTEM_PD_FLASH CONFIG_ESP_SLEEP_POWER_DOWN_FLASH
#define CONFIG_ESP_SYSTEM_PM_POWER_DOWN_CPU CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP
2021-04-14 17:10:05 +02:00
#define CONFIG_FLASHMODE_DIO CONFIG_ESPTOOLPY_FLASHMODE_DIO
#define CONFIG_GAP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING
#define CONFIG_GARP_TMR_INTERVAL CONFIG_LWIP_GARP_TMR_INTERVAL
#define CONFIG_GATTC_ENABLE CONFIG_BT_GATTC_ENABLE
#define CONFIG_GATTS_ENABLE CONFIG_BT_GATTS_ENABLE
#define CONFIG_GATTS_SEND_SERVICE_CHANGE_AUTO CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO
#define CONFIG_GATT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING
#define CONFIG_HCI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING
#define CONFIG_HID_TRACE_LEVEL_WARNING CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING
#define CONFIG_INT_WDT CONFIG_ESP_INT_WDT
#define CONFIG_INT_WDT_TIMEOUT_MS CONFIG_ESP_INT_WDT_TIMEOUT_MS
#define CONFIG_IPC_TASK_STACK_SIZE CONFIG_ESP_IPC_TASK_STACK_SIZE
#define CONFIG_L2CAP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING
#define CONFIG_LOG_BOOTLOADER_LEVEL_INFO CONFIG_BOOTLOADER_LOG_LEVEL_INFO
#define CONFIG_MAIN_TASK_STACK_SIZE CONFIG_ESP_MAIN_TASK_STACK_SIZE
#define CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE
#define CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT
#define CONFIG_MB_CONTROLLER_SLAVE_ID CONFIG_FMB_CONTROLLER_SLAVE_ID
#define CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT
#define CONFIG_MB_CONTROLLER_STACK_SIZE CONFIG_FMB_CONTROLLER_STACK_SIZE
#define CONFIG_MB_EVENT_QUEUE_TIMEOUT CONFIG_FMB_EVENT_QUEUE_TIMEOUT
#define CONFIG_MB_MASTER_DELAY_MS_CONVERT CONFIG_FMB_MASTER_DELAY_MS_CONVERT
#define CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND
#define CONFIG_MB_QUEUE_LENGTH CONFIG_FMB_QUEUE_LENGTH
#define CONFIG_MB_SERIAL_BUF_SIZE CONFIG_FMB_SERIAL_BUF_SIZE
#define CONFIG_MB_SERIAL_TASK_PRIO CONFIG_FMB_PORT_TASK_PRIO
#define CONFIG_MB_SERIAL_TASK_STACK_SIZE CONFIG_FMB_PORT_TASK_STACK_SIZE
#define CONFIG_MB_TIMER_GROUP CONFIG_FMB_TIMER_GROUP
#define CONFIG_MB_TIMER_INDEX CONFIG_FMB_TIMER_INDEX
#define CONFIG_MB_TIMER_PORT_ENABLED CONFIG_FMB_TIMER_PORT_ENABLED
#define CONFIG_MCA_TRACE_LEVEL_WARNING CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING
#define CONFIG_MONITOR_BAUD_115200B CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B
#define CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE
#define CONFIG_OPTIMIZATION_LEVEL_DEBUG CONFIG_COMPILER_OPTIMIZATION_DEFAULT
#define CONFIG_OSI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING
#define CONFIG_PAN_TRACE_LEVEL_WARNING CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING
#define CONFIG_POST_EVENTS_FROM_IRAM_ISR CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR
#define CONFIG_POST_EVENTS_FROM_ISR CONFIG_ESP_EVENT_POST_FROM_ISR
#define CONFIG_RFCOMM_TRACE_LEVEL_WARNING CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING
#define CONFIG_SDP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING
#define CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN
#define CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS
#define CONFIG_SMP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING
#define CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS
#define CONFIG_STACK_CHECK_NONE CONFIG_COMPILER_STACK_CHECK_MODE_NONE
#define CONFIG_SUPPORT_TERMIOS CONFIG_VFS_SUPPORT_TERMIOS
#define CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT
#define CONFIG_SW_COEXIST_ENABLE CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE
#define CONFIG_SYSTEM_EVENT_QUEUE_SIZE CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE
#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE
#define CONFIG_TASK_WDT CONFIG_ESP_TASK_WDT
#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0
#define CONFIG_TASK_WDT_TIMEOUT_S CONFIG_ESP_TASK_WDT_TIMEOUT_S
#define CONFIG_TCPIP_RECVMBOX_SIZE CONFIG_LWIP_TCPIP_RECVMBOX_SIZE
#define CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY
#define CONFIG_TCPIP_TASK_STACK_SIZE CONFIG_LWIP_TCPIP_TASK_STACK_SIZE
#define CONFIG_TCP_MAXRTX CONFIG_LWIP_TCP_MAXRTX
#define CONFIG_TCP_MSL CONFIG_LWIP_TCP_MSL
#define CONFIG_TCP_MSS CONFIG_LWIP_TCP_MSS
#define CONFIG_TCP_OVERSIZE_MSS CONFIG_LWIP_TCP_OVERSIZE_MSS
#define CONFIG_TCP_QUEUE_OOSEQ CONFIG_LWIP_TCP_QUEUE_OOSEQ
#define CONFIG_TCP_RECVMBOX_SIZE CONFIG_LWIP_TCP_RECVMBOX_SIZE
#define CONFIG_TCP_SND_BUF_DEFAULT CONFIG_LWIP_TCP_SND_BUF_DEFAULT
#define CONFIG_TCP_SYNMAXRTX CONFIG_LWIP_TCP_SYNMAXRTX
#define CONFIG_TCP_WND_DEFAULT CONFIG_LWIP_TCP_WND_DEFAULT
#define CONFIG_TIMER_QUEUE_LENGTH CONFIG_FREERTOS_TIMER_QUEUE_LENGTH
#define CONFIG_TIMER_TASK_PRIORITY CONFIG_FREERTOS_TIMER_TASK_PRIORITY
#define CONFIG_TIMER_TASK_STACK_DEPTH CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH
#define CONFIG_TIMER_TASK_STACK_SIZE CONFIG_ESP_TIMER_TASK_STACK_SIZE
#define CONFIG_TOOLPREFIX CONFIG_SDK_TOOLPREFIX
#define CONFIG_UDP_RECVMBOX_SIZE CONFIG_LWIP_UDP_RECVMBOX_SIZE
#define CONFIG_ARDUINO_IDF_COMMIT "c69f0ec32"
2021-04-14 17:10:05 +02:00
#define CONFIG_ARDUINO_IDF_BRANCH "master"