arduino-esp32/tools/sdk/include/bluedroid/oi_utils.h

378 lines
13 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright (C) 2014 The Android Open Source Project
* Copyright 2002 - 2004 Open Interface North America, Inc. All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
#ifndef _OI_UTILS_H
#define _OI_UTILS_H
/**
* @file
*
* This file provides the interface for utility functions.
* Among the utilities are strlen (string length), strcmp (string compare), and
* other string manipulation functions. These are provided for those plaforms
* where this functionality is not available in stdlib.
*/
/**********************************************************************************
$Revision: #1 $
***********************************************************************************/
#include <stdarg.h>
#include "oi_common.h"
#include "oi_string.h"
#include "oi_bt_spec.h"
/** \addtogroup Misc Miscellaneous APIs */
/**@{*/
#ifdef __cplusplus
extern "C" {
#endif
/**
* Opaque type for a callback function handle. See OI_ScheduleCallbackFunction()
*/
typedef OI_UINT32 OI_CALLBACK_HANDLE;
/**
* Function prototype for a timed procedure callback.
*
* @param arg Value that was passed into the OI_ScheduleCallback() function
*
*/
typedef void (*OI_SCHEDULED_CALLBACK)(void *arg);
/**
* Registers a function to be called when a timeout expires. This API uses BLUEmagic's internal
* function dispatch mechanism, so applications that make extensive use of this facility may need to
* increase the value of DispatchTableSize in the configuration block for the dispatcher (see
* oi_bt_stack_config.h).
*
* @param callbackFunction The function that will be called when the timeout expires
*
* @param arg Value that will be returned as the parameter to the callback function.
*
* @param timeout A timeout expressed in OI_INTERVALs (tenths of seconds). This can be
* zero in which case the callback function will be called as soon as
* possible.
*
* @param handle NULL or a pointer receive the callback handle.
*
* @return OI_OK if the function was reqistered, or an error status.
*/
OI_STATUS OI_ScheduleCallbackFunction(OI_SCHEDULED_CALLBACK callbackFunction,
void *arg,
OI_INTERVAL timeout,
OI_CALLBACK_HANDLE *handle);
/**
* Cancels a function registered with OI_ScheduleCallbackFunction() before its timer expires.
*
* @param handle handle returned by OI_ScheduleCallbackFunction().
*
* @return OI_OK if the function was cancelled, or an error status.
*/
OI_STATUS OI_CancelCallbackFunction(OI_CALLBACK_HANDLE handle);
/**
* Registers a function to be called when a timeout expires. This version does not return a handle
* so can only be canceled by calling OI_CancelCallback().
*
* @param callbackFunction The function that will be called when the timeout expires
*
* @param arg Value that will be returned as the parameter to the callback function.
*
* @param timeout A timeout expressed in OI_INTERVALs (tenths of seconds). This can be
* zero in which case the callback function will be called as soon as
* possible.
*
* @return OI_OK if the function was reqistered, or an error status.
*/
#define OI_ScheduleCallback(f, a, t) OI_ScheduleCallbackFunction(f, a, t, NULL);
/**
* Cancels a function registered with OI_ScheduleCallback() before its timer expires. This
* function will cancel the first entry matches the indicated callback function pointer.
*
* @param callbackFunction The function that was originally registered
*
* @return OI_OK if the function was cancelled, or an error status.
*/
OI_STATUS OI_CancelCallback(OI_SCHEDULED_CALLBACK callbackFunction);
/**
* Parse a Bluetooth device address from the specified string.
*
* @param str the string to parse
* @param addr the parsed address, if successful
*
* @return TRUE if an address was successfully parsed, FALSE otherwise
*/
OI_BOOL OI_ParseBdAddr(const OI_CHAR *str,
OI_BD_ADDR *addr) ;
/**
* Printf function for platforms which have no stdio or printf available.
* OI_Printf supports the basic formatting types, with the exception of
* floating point types. Additionally, OI_Printf supports several formats
* specific to BLUEmagic 3.0 software:
*
* \%! prints the string for an #OI_STATUS value.
* @code OI_Printf("There was an error %!", status); @endcode
*
* \%@ prints a hex dump of a buffer.
* Requires a pointer to the buffer and a signed integer length
* (0 for default length). If the buffer is large, only an excerpt will
* be printed.
* @code OI_Printf("Contents of buffer %@", buffer, sizeof(buffer)); @endcode
*
* \%: prints a Bluetooth address in the form "HH:HH:HH:HH:HH:HH".
* Requires a pointer to an #OI_BD_ADDR.
* @code OI_Printf("Bluetooth address %:", &bdaddr); @endcode
*
* \%^ decodes and prints a data element as formatted XML.
* Requires a pointer to an #OI_DATAELEM.
* @code OI_Printf("Service attribute list is:\n%^", &attributes); @endcode
*
* \%/ prints the base file name of a path, that is, the final substring
* following a '/' or '\\' character. Requires a pointer to a null
* terminated string.
* @code OI_Printf("File %/", "c:\\dir1\\dir2\\file.txt"); @endcode
*
* \%~ prints a string, escaping characters as needed to display it in
* ASCII. Requires a pointer to an #OI_PSTR and an #OI_UNICODE_ENCODING
* parameter.
* @code OI_Printf("Identifier %~", &id, OI_UNICODE_UTF16_BE); @endcode
*
* \%[ inserts an ANSI color escape sequence. Requires a single character
* identifying the color to select. Colors are red (r/R), green (g/G),
* blue (b/B), yellow (y/Y), cyan (c/C), magenta (m/M), white (W),
* light-gray (l/L), dark-gray (d/D), and black (0). The lower case is
* dim, the upper case is bright (except in the case of light-gray and
* dark-gray, where bright and dim are identical). Any other value will
* select the default color.
* @code OI_Printf("%[red text %[black %[normal\n", 'r', '0', 0); @endcode
*
* \%a same as \%s, except '\\r' and '\\n' are output as "<cr>" and "<lf>".
* \%?a is valid, but \%la is not.
*
* \%b prints an integer in base 2.
* @code OI_Printf("Bits are %b", I); @endcode
*
* \%lb prints a long integer in base 2.
*
* \%?b prints the least significant N bits of an integer (or long integer)
* in base 2. Requires the integer and a length N.
* @code OI_Printf("Bottom 4 bits are: %?b", I, 4); @endcode
*
* \%B prints an integer as boolean text, "TRUE" or "FALSE".
* @code OI_Printf("The value 0 is %B, the value 1 is %B", 0, 1); @endcode
*
* \%?s prints a substring up to a specified maximum length.
* Requires a pointer to a string and a length parameter.
* @code OI_Printf("String prefix is %?s", str, 3); @endcode
*
* \%ls same as \%S.
*
* \%S prints a UTF16 string as UTF8 (plain ASCII, plus 8-bit char sequences
* where needed). Requires a pointer to #OI_CHAR16. \%?S is valid. The
* length parameter is in OI_CHAR16 characters.
*
* \%T prints time, formatted as "secs.msecs".
* Requires pointer to #OI_TIME struct, NULL pointer prints current time.
* @code OI_Printf("The time now is %T", NULL); @endcode
*
* @param format The format string
*
*/
void OI_Printf(const OI_CHAR *format, ...);
/**
* Var-args version OI_Printf
*
* @param format Same as for OI_Printf.
*
* @param argp Var-args list.
*/
void OI_VPrintf(const OI_CHAR *format, va_list argp);
/**
* Writes a formatted string to a buffer. This function supports the same format specifiers as
* OI_Printf().
*
* @param buffer Destination buffer for the formatted string.
*
* @param bufLen The length of the destination buffer.
*
* @param format The format string
*
* @return Number of characters written or -1 in the case of an error.
*/
OI_INT32 OI_SNPrintf(OI_CHAR *buffer,
OI_UINT16 bufLen,
const OI_CHAR *format, ...);
/**
* Var-args version OI_SNPrintf
*
* @param buffer Destination buffer for the formatted string.
*
* @param bufLen The length of the destination buffer.
*
* @param format The format string
*
* @param argp Var-args list.
*
* @return Number of characters written or -1 in the case of an error.
*/
OI_INT32 OI_VSNPrintf(OI_CHAR *buffer,
OI_UINT16 bufLen,
const OI_CHAR *format, va_list argp);
/**
* Convert a string to an integer.
*
* @param str the string to parse
*
* @return the integer value of the string or 0 if the string could not be parsed
*/
OI_INT OI_atoi(const OI_CHAR *str);
/**
* Parse a signed integer in a string.
*
* Skips leading whitespace (space and tabs only) and parses a decimal or hex string. Hex string
* must be prefixed by "0x". Returns pointer to first character following the integer. Returns the
* pointer passed in if the string does not describe an integer.
*
* @param str String to parse.
*
* @param val Pointer to receive the parsed integer value.
*
* @return A pointer to the first character following the integer or the pointer passed in.
*/
const OI_CHAR *OI_ScanInt(const OI_CHAR *str,
OI_INT32 *val);
/**
* Parse an unsigned integer in a string.
*
* Skips leading whitespace (space and tabs only) and parses a decimal or hex string. Hex string
* must be prefixed by "0x". Returns pointer to first character following the integer. Returns the
* pointer passed in if the string does not describe an integer.
*
* @param str String to parse.
*
* @param val Pointer to receive the parsed unsigned integer value.
*
* @return A pointer to the first character following the unsigned integer or the pointer passed in.
*/
const OI_CHAR *OI_ScanUInt(const OI_CHAR *str,
OI_UINT32 *val);
/**
* Parse a whitespace delimited substring out of a string.
*
* @param str Input string to parse.
* @param outStr Buffer to return the substring
* @param len Length of outStr
*
*
* @return A pointer to the first character following the substring or the pointer passed in.
*/
const OI_CHAR *OI_ScanStr(const OI_CHAR *str,
OI_CHAR *outStr,
OI_UINT16 len);
/**
* Parse a string for one of a set of alternative value. Skips leading whitespace (space and tabs
* only) and parses text matching one of the alternative strings. Returns pointer to first character
* following the matched text.
*
* @param str String to parse.
*
* @param alts Alternative matching strings separated by '|'
*
* @param index Pointer to receive the index of the matching alternative, return value is -1 if
* there is no match.
*
* @return A pointer to the first character following the matched value or the pointer passed in
* if there was no matching text.
*/
const OI_CHAR *OI_ScanAlt(const OI_CHAR *str,
const OI_CHAR *alts,
OI_INT *index);
/**
* Parse a string for a BD Addr. Skips leading whitespace (space and tabs only) and parses a
* Bluetooth device address with nibbles optionally separated by colons. Return pointet to first
* character following the BD Addr.
*
* @param str String to parse.
*
* @param addr Pointer to receive the Bluetooth device address
*
* @return A pointer to the first character following the BD Addr or the pointer passed in.
*/
const OI_CHAR *OI_ScanBdAddr(const OI_CHAR *str,
OI_BD_ADDR *addr);
/** Get a character from a digit integer value (0 - 9). */
#define OI_DigitToChar(d) ((d) + '0')
/**
* Determine Maximum and Minimum between two arguments.
*
* @param a 1st value
* @param b 2nd value
*
* @return the max or min value between a & b
*/
#define OI_MAX(a, b) (((a) < (b)) ? (b) : (a) )
#define OI_MIN(a, b) (((a) > (b)) ? (b) : (a) )
/**
* Compare two BD_ADDRs
* SAME_BD_ADDR - Boolean: TRUE if they are the same address
*/
#define SAME_BD_ADDR(x, y) (0 == OI_MemCmp((x),(y),OI_BD_ADDR_BYTE_SIZE) )
#ifdef __cplusplus
}
#endif
/**@}*/
#endif /* _OI_UTILS_H */