arduino-esp32/tools/sdk/include/bluedroid/oi_bt_spec.h

230 lines
7.7 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright (C) 2014 The Android Open Source Project
* Copyright 2002 - 2004 Open Interface North America, Inc. All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
#ifndef _OI_BT_SPEC_H
#define _OI_BT_SPEC_H
/**
* @file
*
* This file contains common definitions from the Bluetooth specification.
*
*/
/**********************************************************************************
$Revision: #1 $
***********************************************************************************/
#include "oi_stddefs.h"
/** \addtogroup Misc Miscellaneous APIs */
/**@{*/
#ifdef __cplusplus
extern "C" {
#endif
/** The maximum number of active slaves in a piconet. */
#define OI_BT_MAX_ACTIVE_SLAVES 7
/** the number of bytes in a Bluetooth device address (BD_ADDR) */
#define OI_BD_ADDR_BYTE_SIZE 6
/**
* 48-bit Bluetooth device address
*
* Because 48-bit integers may not be supported on all platforms, the
* address is defined as an array of bytes. This array is big-endian,
* meaning that
* - array[0] contains bits 47-40,
* - array[1] contains bits 39-32,
* - array[2] contains bits 31-24,
* - array[3] contains bits 23-16,
* - array[4] contains bits 15-8, and
* - array[5] contains bits 7-0.
*/
typedef struct {
OI_UINT8 addr[OI_BD_ADDR_BYTE_SIZE] ; /**< Bluetooth device address represented as an array of 8-bit values */
} OI_BD_ADDR ;
/**
* @name Data types for working with UUIDs
* UUIDs are 16 bytes (128 bits).
*
* To avoid having to pass around 128-bit values all the time, 32-bit and 16-bit
* UUIDs are defined, along with a mapping from the shorter versions to the full
* version.
*
* @{
*/
/**
* 16-bit representation of a 128-bit UUID
*/
typedef OI_UINT16 OI_UUID16;
/**
* 32-bit representation of a 128-bit UUID
*/
typedef OI_UINT32 OI_UUID32;
/**
* number of bytes in a 128 bit UUID
*/
#define OI_BT_UUID128_SIZE 16
/**
* number of bytes in IPv6 style addresses
*/
#define OI_BT_IPV6ADDR_SIZE 16
/**
* type definition for a 128-bit UUID
*
* To simplify conversion between 128-bit UUIDs and 16-bit and 32-bit UUIDs,
* the most significant 32 bits are stored with the same endian-ness as is
* native on the target (local) device. The remainder of the 128-bit UUID is
* stored as bytes in big-endian order.
*/
typedef struct {
OI_UINT32 ms32bits; /**< most significant 32 bits of 128-bit UUID */
OI_UINT8 base[OI_BT_UUID128_SIZE - sizeof(OI_UINT32)]; /**< remainder of 128-bit UUID, array of 8-bit values */
} OI_UUID128;
/** @} */
/** number of bytes in a link key */
#define OI_BT_LINK_KEY_SIZE 16
/**
* type definition for a baseband link key
*
* Because 128-bit integers may not be supported on all platforms, we define
* link keys as an array of bytes. Unlike the Bluetooth device address,
* the link key is stored in little-endian order, meaning that
* - array[0] contains bits 0 - 7,
* - array[1] contains bits 8 - 15,
* - array[2] contains bits 16 - 23,
* - array[3] contains bits 24 - 31,
* - array[4] contains bits 32 - 39,
* - array[5] contains bits 40 - 47,
* - array[6] contains bits 48 - 55,
* - array[7] contains bits 56 - 63,
* - array[8] contains bits 64 - 71,
* - array[9] contains bits 72 - 79,
* - array[10] contains bits 80 - 87,
* - array[11] contains bits 88 - 95,
* - array[12] contains bits 96 - 103,
* - array[13] contains bits 104- 111,
* - array[14] contains bits 112- 119, and
* - array[15] contains bits 120- 127.
*/
typedef struct {
OI_UINT8 key[OI_BT_LINK_KEY_SIZE] ; /**< link key represented as an array of 8-bit values */
} OI_LINK_KEY ;
/** Out-of-band data size - C and R values are 16-bytes each */
#define OI_BT_OOB_NUM_BYTES 16
typedef struct {
OI_UINT8 value[OI_BT_OOB_NUM_BYTES] ; /**< same struct used for C and R values */
} OI_OOB_DATA ;
/**
* link key types
*/
typedef enum {
OI_LINK_KEY_TYPE_COMBO = 0, /**< combination key */
OI_LINK_KEY_TYPE_LOCAL_UNIT = 1, /**< local unit key */
OI_LINK_KEY_TYPE_REMOTE_UNIT = 2, /**< remote unit key */
OI_LINK_KEY_TYPE_DEBUG_COMBO = 3, /**< debug combination key */
OI_LINK_KEY_TYPE_UNAUTHENTICATED = 4, /**< Unauthenticated */
OI_LINK_KEY_TYPE_AUTHENTICATED = 5, /**< Authenticated */
OI_LINK_KEY_TYPE_CHANGED_COMBO = 6 /**< Changed */
} OI_BT_LINK_KEY_TYPE ;
/** amount of space allocated for a PIN (personal indentification number) in bytes */
#define OI_BT_PIN_CODE_SIZE 16
/** data type for a PIN (PINs are treated as strings, so endianness does not apply.) */
typedef struct {
OI_UINT8 pin[OI_BT_PIN_CODE_SIZE] ; /**< PIN represented as an array of 8-bit values */
} OI_PIN_CODE ;
/** maximum number of SCO connections per device, which is 3 as of version 2.0+EDR
of the Bluetooth specification (see sec 4.3 of vol 2 part B) */
#define OI_BT_MAX_SCO_CONNECTIONS 3
/** data type for clock offset */
typedef OI_UINT16 OI_BT_CLOCK_OFFSET ;
/** data type for a LM handle */
typedef OI_UINT16 OI_HCI_LM_HANDLE;
/** opaque data type for a SCO or ACL connection handle */
typedef struct _OI_HCI_CONNECTION *OI_HCI_CONNECTION_HANDLE;
/** data type for HCI Error Code, as defined in oi_hcispec.h */
typedef OI_UINT8 OI_HCI_ERROR_CODE ;
/**
* The Bluetooth device type is indicated by a 24-bit bitfield, represented as a
* 32-bit number in the stack. The bit layout and values for device class are specified
* in the file oi_bt_assigned_nos.h and in the Bluetooth "Assigned Numbers" specification
* at http://www.bluetooth.org/assigned-numbers/.
*/
typedef OI_UINT32 OI_BT_DEVICE_CLASS ;
#define OI_BT_DEV_CLASS_FORMAT_MASK 0x000003 /**< Bits 0-1 contain format type. */
#define OI_BT_DEV_CLASS_MINOR_DEVICE_MASK 0x0000FC /**< Bits 2-7 contain minor device class value. */
#define OI_BT_DEV_CLASS_MAJOR_DEVICE_MASK 0x001F00 /**< Bits 8-12 contain major device class value. */
#define OI_BT_DEV_CLASS_MAJOR_SERVICE_MASK 0xFFE000 /**< Bits 13-23 contain major service class value. */
/** There is currently only one device class format defined, type 00. */
#define OI_BT_DEV_CLASS_FORMAT_TYPE 00
/** Bit 13 in device class indicates limited discoverability mode (GAP v2.0+EDR, section 4.1.2.2) */
#define OI_BT_DEV_CLASS_LIMITED_DISCO_BIT BIT13
/** macro to test validity of the Device Class Format */
#define OI_BT_VALID_DEVICE_CLASS_FORMAT(class) (OI_BT_DEV_CLASS_FORMAT_TYPE == ((class) & OI_BT_DEV_CLASS_FORMAT_MASK))
/** the time between baseband clock ticks, currently 625 microseconds (one slot) */
#define OI_BT_TICK 625
/** some macros to convert to/from baseband clock ticks - use no floating point! */
#define OI_SECONDS_TO_BT_TICKS(secs) ((secs)*1600)
#define OI_BT_TICKS_TO_SECONDS(ticks) ((ticks)/1600)
#define OI_MSECS_TO_BT_TICKS(msecs) (((msecs)*8)/5)
#define OI_BT_TICKS_TO_MSECS(ticks) (((ticks)*5)/8)
/** EIR byte order */
#define OI_EIR_BYTE_ORDER OI_LITTLE_ENDIAN_BYTE_ORDER
#ifdef __cplusplus
}
#endif
/**@}*/
/*****************************************************************************/
#endif /* _OI_BT_SPEC_H */