2018-09-17 23:19:27 +02:00
|
|
|
// Copyright 2018 Espressif Systems (Shanghai) PTE LTD
|
|
|
|
//
|
|
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
|
|
// you may not use this file except in compliance with the License.
|
|
|
|
// You may obtain a copy of the License at
|
|
|
|
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
//
|
|
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
|
// See the License for the specific language governing permissions and
|
|
|
|
// limitations under the License.
|
|
|
|
|
|
|
|
#include "freertos/FreeRTOS.h"
|
|
|
|
#include "freertos/event_groups.h"
|
|
|
|
#include "freertos/semphr.h"
|
|
|
|
|
|
|
|
#include "esp32-hal.h"
|
|
|
|
#include "esp8266-compat.h"
|
|
|
|
#include "soc/gpio_reg.h"
|
|
|
|
#include "soc/gpio_reg.h"
|
|
|
|
|
|
|
|
#include "esp32-hal-rmt.h"
|
|
|
|
#include "driver/periph_ctrl.h"
|
|
|
|
|
|
|
|
#include "soc/rmt_struct.h"
|
|
|
|
#include "esp_intr_alloc.h"
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Internal macros
|
|
|
|
*/
|
|
|
|
#define MAX_CHANNELS 8
|
|
|
|
#define MAX_DATA_PER_CHANNEL 64
|
|
|
|
#define MAX_DATA_PER_ITTERATION 62
|
|
|
|
#define _ABS(a) (a>0?a:-a)
|
|
|
|
#define _LIMIT(a,b) (a>b?b:a)
|
|
|
|
#define __INT_TX_END (1)
|
|
|
|
#define __INT_RX_END (2)
|
|
|
|
#define __INT_ERROR (4)
|
|
|
|
#define __INT_THR_EVNT (1<<24)
|
|
|
|
|
|
|
|
#define _INT_TX_END(channel) (__INT_TX_END<<(channel*3))
|
|
|
|
#define _INT_RX_END(channel) (__INT_RX_END<<(channel*3))
|
|
|
|
#define _INT_ERROR(channel) (__INT_ERROR<<(channel*3))
|
|
|
|
#define _INT_THR_EVNT(channel) ((__INT_THR_EVNT)<<(channel))
|
|
|
|
|
|
|
|
#if CONFIG_DISABLE_HAL_LOCKS
|
2018-11-19 16:39:42 +01:00
|
|
|
# define RMT_MUTEX_LOCK(channel)
|
|
|
|
# define RMT_MUTEX_UNLOCK(channel)
|
2018-09-17 23:19:27 +02:00
|
|
|
#else
|
|
|
|
# define RMT_MUTEX_LOCK(channel) do {} while (xSemaphoreTake(g_rmt_objlocks[channel], portMAX_DELAY) != pdPASS)
|
|
|
|
# define RMT_MUTEX_UNLOCK(channel) xSemaphoreGive(g_rmt_objlocks[channel])
|
|
|
|
#endif /* CONFIG_DISABLE_HAL_LOCKS */
|
|
|
|
|
|
|
|
#define _RMT_INTERNAL_DEBUG
|
|
|
|
#ifdef _RMT_INTERNAL_DEBUG
|
|
|
|
# define DEBUG_INTERRUPT_START(pin) digitalWrite(pin, 1);
|
|
|
|
# define DEBUG_INTERRUPT_END(pin) digitalWrite(pin, 0);
|
|
|
|
#else
|
|
|
|
# define DEBUG_INTERRUPT_START(pin)
|
|
|
|
# define DEBUG_INTERRUPT_END(pin)
|
|
|
|
#endif /* _RMT_INTERNAL_DEBUG */
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Typedefs for internal stuctures, enums
|
|
|
|
*/
|
|
|
|
typedef enum {
|
|
|
|
E_NO_INTR = 0,
|
|
|
|
E_TX_INTR = 1,
|
|
|
|
E_TXTHR_INTR = 2,
|
|
|
|
E_RX_INTR = 4,
|
|
|
|
} intr_mode_t;
|
|
|
|
|
|
|
|
typedef enum {
|
|
|
|
E_INACTIVE = 0,
|
|
|
|
E_FIRST_HALF = 1,
|
|
|
|
E_LAST_DATA = 2,
|
|
|
|
E_END_TRANS = 4,
|
|
|
|
E_SET_CONTI = 8,
|
|
|
|
} transaction_state_t;
|
|
|
|
|
|
|
|
struct rmt_obj_s
|
|
|
|
{
|
|
|
|
bool allocated;
|
|
|
|
EventGroupHandle_t events;
|
|
|
|
int pin;
|
|
|
|
int channel;
|
|
|
|
bool tx_not_rx;
|
|
|
|
int buffers;
|
|
|
|
int data_size;
|
|
|
|
uint32_t* data_ptr;
|
|
|
|
intr_mode_t intr_mode;
|
|
|
|
transaction_state_t tx_state;
|
|
|
|
rmt_rx_data_cb_t cb;
|
|
|
|
bool data_alloc;
|
2020-10-14 13:41:50 +02:00
|
|
|
void * arg;
|
2018-09-17 23:19:27 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Internal variables for channel descriptors
|
|
|
|
*/
|
|
|
|
static xSemaphoreHandle g_rmt_objlocks[MAX_CHANNELS] = {
|
|
|
|
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL
|
|
|
|
};
|
|
|
|
|
|
|
|
static rmt_obj_t g_rmt_objects[MAX_CHANNELS] = {
|
2020-10-14 13:41:50 +02:00
|
|
|
{ false, NULL, 0, 0, 0, 0, 0, NULL, E_NO_INTR, E_INACTIVE, NULL, false, NULL},
|
|
|
|
{ false, NULL, 0, 0, 0, 0, 0, NULL, E_NO_INTR, E_INACTIVE, NULL, false, NULL},
|
|
|
|
{ false, NULL, 0, 0, 0, 0, 0, NULL, E_NO_INTR, E_INACTIVE, NULL, false, NULL},
|
|
|
|
{ false, NULL, 0, 0, 0, 0, 0, NULL, E_NO_INTR, E_INACTIVE, NULL, false, NULL},
|
|
|
|
{ false, NULL, 0, 0, 0, 0, 0, NULL, E_NO_INTR, E_INACTIVE, NULL, false, NULL},
|
|
|
|
{ false, NULL, 0, 0, 0, 0, 0, NULL, E_NO_INTR, E_INACTIVE, NULL, false, NULL},
|
|
|
|
{ false, NULL, 0, 0, 0, 0, 0, NULL, E_NO_INTR, E_INACTIVE, NULL, false, NULL},
|
|
|
|
{ false, NULL, 0, 0, 0, 0, 0, NULL, E_NO_INTR, E_INACTIVE, NULL, false, NULL},
|
2018-09-17 23:19:27 +02:00
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Internal variables for driver data
|
|
|
|
*/
|
|
|
|
static intr_handle_t intr_handle;
|
|
|
|
|
|
|
|
static bool periph_enabled = false;
|
|
|
|
|
|
|
|
static xSemaphoreHandle g_rmt_block_lock = NULL;
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Internal method (private) declarations
|
|
|
|
*/
|
|
|
|
static void _initPin(int pin, int channel, bool tx_not_rx);
|
|
|
|
|
2020-01-20 18:43:13 +01:00
|
|
|
static bool _rmtSendOnce(rmt_obj_t* rmt, rmt_data_t* data, size_t size, bool continuous);
|
2018-09-17 23:19:27 +02:00
|
|
|
|
|
|
|
static void IRAM_ATTR _rmt_isr(void* arg);
|
|
|
|
|
|
|
|
static rmt_obj_t* _rmtAllocate(int pin, int from, int size);
|
|
|
|
|
|
|
|
static void _initPin(int pin, int channel, bool tx_not_rx);
|
|
|
|
|
|
|
|
static int IRAM_ATTR _rmt_get_mem_len(uint8_t channel);
|
|
|
|
|
|
|
|
static void IRAM_ATTR _rmt_tx_mem_first(uint8_t ch);
|
|
|
|
|
|
|
|
static void IRAM_ATTR _rmt_tx_mem_second(uint8_t ch);
|
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Public method definitions
|
|
|
|
*/
|
|
|
|
bool rmtSetCarrier(rmt_obj_t* rmt, bool carrier_en, bool carrier_level, uint32_t low, uint32_t high)
|
|
|
|
{
|
|
|
|
if (!rmt || low > 0xFFFF || high > 0xFFFF) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
size_t channel = rmt->channel;
|
|
|
|
|
|
|
|
RMT_MUTEX_LOCK(channel);
|
|
|
|
|
|
|
|
RMT.carrier_duty_ch[channel].low = low;
|
2019-01-14 12:30:07 +01:00
|
|
|
RMT.carrier_duty_ch[channel].high = high;
|
2018-09-17 23:19:27 +02:00
|
|
|
RMT.conf_ch[channel].conf0.carrier_en = carrier_en;
|
|
|
|
RMT.conf_ch[channel].conf0.carrier_out_lv = carrier_level;
|
|
|
|
|
|
|
|
RMT_MUTEX_UNLOCK(channel);
|
|
|
|
|
|
|
|
return true;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
bool rmtSetFilter(rmt_obj_t* rmt, bool filter_en, uint32_t filter_level)
|
|
|
|
{
|
|
|
|
if (!rmt || filter_level > 0xFF) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
size_t channel = rmt->channel;
|
|
|
|
|
|
|
|
RMT_MUTEX_LOCK(channel);
|
|
|
|
|
|
|
|
RMT.conf_ch[channel].conf1.rx_filter_thres = filter_level;
|
|
|
|
RMT.conf_ch[channel].conf1.rx_filter_en = filter_en;
|
|
|
|
|
|
|
|
RMT_MUTEX_UNLOCK(channel);
|
|
|
|
|
|
|
|
return true;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
bool rmtSetRxThreshold(rmt_obj_t* rmt, uint32_t value)
|
|
|
|
{
|
|
|
|
if (!rmt || value > 0xFFFF) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
size_t channel = rmt->channel;
|
|
|
|
|
|
|
|
RMT_MUTEX_LOCK(channel);
|
|
|
|
RMT.conf_ch[channel].conf0.idle_thres = value;
|
|
|
|
RMT_MUTEX_UNLOCK(channel);
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
bool rmtDeinit(rmt_obj_t *rmt)
|
|
|
|
{
|
|
|
|
if (!rmt) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
// sanity check
|
|
|
|
if (rmt != &(g_rmt_objects[rmt->channel])) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
size_t from = rmt->channel;
|
|
|
|
size_t to = rmt->buffers + rmt->channel;
|
|
|
|
size_t i;
|
|
|
|
|
|
|
|
#if !CONFIG_DISABLE_HAL_LOCKS
|
|
|
|
if(g_rmt_objlocks[from] != NULL) {
|
|
|
|
vSemaphoreDelete(g_rmt_objlocks[from]);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
if (g_rmt_objects[from].data_alloc) {
|
|
|
|
free(g_rmt_objects[from].data_ptr);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = from; i < to; i++) {
|
|
|
|
g_rmt_objects[i].allocated = false;
|
|
|
|
}
|
|
|
|
|
|
|
|
g_rmt_objects[from].channel = 0;
|
|
|
|
g_rmt_objects[from].buffers = 0;
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2020-01-20 18:43:13 +01:00
|
|
|
bool rmtLoop(rmt_obj_t* rmt, rmt_data_t* data, size_t size)
|
|
|
|
{
|
|
|
|
if (!rmt) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
int allocated_size = MAX_DATA_PER_CHANNEL * rmt->buffers;
|
|
|
|
|
|
|
|
if (size > allocated_size) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
return _rmtSendOnce(rmt, data, size, true);
|
|
|
|
}
|
|
|
|
|
2018-09-17 23:19:27 +02:00
|
|
|
bool rmtWrite(rmt_obj_t* rmt, rmt_data_t* data, size_t size)
|
|
|
|
{
|
|
|
|
if (!rmt) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
int channel = rmt->channel;
|
|
|
|
int allocated_size = MAX_DATA_PER_CHANNEL * rmt->buffers;
|
|
|
|
|
|
|
|
if (size > allocated_size) {
|
|
|
|
|
|
|
|
int half_tx_nr = MAX_DATA_PER_ITTERATION/2;
|
|
|
|
RMT_MUTEX_LOCK(channel);
|
|
|
|
// setup interrupt handler if not yet installed for half and full tx
|
|
|
|
if (!intr_handle) {
|
|
|
|
esp_intr_alloc(ETS_RMT_INTR_SOURCE, (int)ESP_INTR_FLAG_IRAM, _rmt_isr, NULL, &intr_handle);
|
|
|
|
}
|
|
|
|
|
|
|
|
rmt->data_size = size - MAX_DATA_PER_ITTERATION;
|
|
|
|
rmt->data_ptr = ((uint32_t*)data) + MAX_DATA_PER_ITTERATION;
|
|
|
|
rmt->intr_mode = E_TX_INTR | E_TXTHR_INTR;
|
|
|
|
rmt->tx_state = E_SET_CONTI | E_FIRST_HALF;
|
|
|
|
|
|
|
|
// init the tx limit for interruption
|
|
|
|
RMT.tx_lim_ch[channel].limit = half_tx_nr+2;
|
|
|
|
// reset memory pointer
|
|
|
|
RMT.conf_ch[channel].conf1.apb_mem_rst = 1;
|
|
|
|
RMT.conf_ch[channel].conf1.apb_mem_rst = 0;
|
|
|
|
RMT.conf_ch[channel].conf1.mem_rd_rst = 1;
|
|
|
|
RMT.conf_ch[channel].conf1.mem_rd_rst = 0;
|
|
|
|
RMT.conf_ch[channel].conf1.mem_wr_rst = 1;
|
|
|
|
RMT.conf_ch[channel].conf1.mem_wr_rst = 0;
|
|
|
|
|
|
|
|
// set the tx end mark
|
|
|
|
RMTMEM.chan[channel].data32[MAX_DATA_PER_ITTERATION].val = 0;
|
|
|
|
|
|
|
|
// clear and enable both Tx completed and half tx event
|
|
|
|
RMT.int_clr.val = _INT_TX_END(channel);
|
|
|
|
RMT.int_clr.val = _INT_THR_EVNT(channel);
|
|
|
|
RMT.int_clr.val = _INT_ERROR(channel);
|
|
|
|
|
|
|
|
RMT.int_ena.val |= _INT_TX_END(channel);
|
|
|
|
RMT.int_ena.val |= _INT_THR_EVNT(channel);
|
|
|
|
RMT.int_ena.val |= _INT_ERROR(channel);
|
|
|
|
|
|
|
|
RMT_MUTEX_UNLOCK(channel);
|
|
|
|
|
|
|
|
// start the transation
|
2020-01-20 18:43:13 +01:00
|
|
|
return _rmtSendOnce(rmt, data, MAX_DATA_PER_ITTERATION, false);
|
2018-09-17 23:19:27 +02:00
|
|
|
} else {
|
|
|
|
// use one-go mode if data fits one buffer
|
2020-01-20 18:43:13 +01:00
|
|
|
return _rmtSendOnce(rmt, data, size, false);
|
2018-09-17 23:19:27 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
bool rmtReadData(rmt_obj_t* rmt, uint32_t* data, size_t size)
|
|
|
|
{
|
|
|
|
if (!rmt) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
int channel = rmt->channel;
|
|
|
|
|
|
|
|
if (g_rmt_objects[channel].buffers < size/MAX_DATA_PER_CHANNEL) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
size_t i;
|
|
|
|
volatile uint32_t* rmt_mem_ptr = &(RMTMEM.chan[channel].data32[0].val);
|
|
|
|
for (i=0; i<size; i++) {
|
|
|
|
data[i] = *rmt_mem_ptr++;
|
|
|
|
}
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2020-10-14 13:41:50 +02:00
|
|
|
|
2018-09-17 23:19:27 +02:00
|
|
|
bool rmtBeginReceive(rmt_obj_t* rmt)
|
|
|
|
{
|
|
|
|
if (!rmt) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
int channel = rmt->channel;
|
|
|
|
|
|
|
|
RMT.int_clr.val = _INT_ERROR(channel);
|
|
|
|
RMT.int_ena.val |= _INT_ERROR(channel);
|
|
|
|
|
|
|
|
RMT.conf_ch[channel].conf1.mem_owner = 1;
|
|
|
|
RMT.conf_ch[channel].conf1.mem_wr_rst = 1;
|
|
|
|
RMT.conf_ch[channel].conf1.rx_en = 1;
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool rmtReceiveCompleted(rmt_obj_t* rmt)
|
|
|
|
{
|
|
|
|
if (!rmt) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
int channel = rmt->channel;
|
|
|
|
|
|
|
|
if (RMT.int_raw.val&_INT_RX_END(channel)) {
|
|
|
|
// RX end flag
|
|
|
|
RMT.int_clr.val = _INT_RX_END(channel);
|
|
|
|
return true;
|
|
|
|
} else {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2020-10-14 13:41:50 +02:00
|
|
|
bool rmtRead(rmt_obj_t* rmt, rmt_rx_data_cb_t cb, void * arg)
|
2018-09-17 23:19:27 +02:00
|
|
|
{
|
|
|
|
if (!rmt && !cb) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
int channel = rmt->channel;
|
|
|
|
|
|
|
|
RMT_MUTEX_LOCK(channel);
|
2020-10-14 13:41:50 +02:00
|
|
|
rmt->arg = arg;
|
2018-09-17 23:19:27 +02:00
|
|
|
rmt->intr_mode = E_RX_INTR;
|
|
|
|
rmt->tx_state = E_FIRST_HALF;
|
|
|
|
rmt->cb = cb;
|
|
|
|
// allocate internally two buffers which would alternate
|
|
|
|
if (!rmt->data_alloc) {
|
|
|
|
rmt->data_ptr = (uint32_t*)malloc(2*MAX_DATA_PER_CHANNEL*(rmt->buffers)*sizeof(uint32_t));
|
|
|
|
rmt->data_size = MAX_DATA_PER_CHANNEL*rmt->buffers;
|
|
|
|
rmt->data_alloc = true;
|
|
|
|
}
|
|
|
|
|
|
|
|
RMT.conf_ch[channel].conf1.mem_owner = 1;
|
|
|
|
|
|
|
|
RMT.int_clr.val = _INT_RX_END(channel);
|
|
|
|
RMT.int_clr.val = _INT_ERROR(channel);
|
|
|
|
|
|
|
|
RMT.int_ena.val |= _INT_RX_END(channel);
|
|
|
|
RMT.int_ena.val |= _INT_ERROR(channel);
|
|
|
|
|
|
|
|
RMT.conf_ch[channel].conf1.mem_wr_rst = 1;
|
|
|
|
|
|
|
|
RMT.conf_ch[channel].conf1.rx_en = 1;
|
|
|
|
RMT_MUTEX_UNLOCK(channel);
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2020-10-14 13:41:50 +02:00
|
|
|
bool rmtEnd(rmt_obj_t* rmt) {
|
|
|
|
if (!rmt) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
int channel = rmt->channel;
|
|
|
|
|
|
|
|
RMT_MUTEX_LOCK(channel);
|
|
|
|
RMT.conf_ch[channel].conf1.rx_en = 1;
|
|
|
|
RMT_MUTEX_UNLOCK(channel);
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2018-09-17 23:19:27 +02:00
|
|
|
bool rmtReadAsync(rmt_obj_t* rmt, rmt_data_t* data, size_t size, void* eventFlag, bool waitForData, uint32_t timeout)
|
|
|
|
{
|
|
|
|
if (!rmt) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
int channel = rmt->channel;
|
|
|
|
|
|
|
|
if (g_rmt_objects[channel].buffers < size/MAX_DATA_PER_CHANNEL) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (eventFlag) {
|
|
|
|
xEventGroupClearBits(eventFlag, RMT_FLAGS_ALL);
|
|
|
|
rmt->events = eventFlag;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (data && size>0) {
|
|
|
|
rmt->data_ptr = (uint32_t*)data;
|
|
|
|
rmt->data_size = size;
|
|
|
|
}
|
|
|
|
|
|
|
|
RMT_MUTEX_LOCK(channel);
|
|
|
|
rmt->intr_mode = E_RX_INTR;
|
|
|
|
|
|
|
|
RMT.conf_ch[channel].conf1.mem_owner = 1;
|
|
|
|
|
|
|
|
RMT.int_clr.val = _INT_RX_END(channel);
|
|
|
|
RMT.int_clr.val = _INT_ERROR(channel);
|
|
|
|
|
|
|
|
RMT.int_ena.val |= _INT_RX_END(channel);
|
|
|
|
RMT.int_ena.val |= _INT_ERROR(channel);
|
|
|
|
|
|
|
|
RMT.conf_ch[channel].conf1.mem_wr_rst = 1;
|
|
|
|
|
|
|
|
RMT.conf_ch[channel].conf1.rx_en = 1;
|
|
|
|
RMT_MUTEX_UNLOCK(channel);
|
|
|
|
|
|
|
|
// wait for data if requested so
|
|
|
|
if (waitForData && eventFlag) {
|
|
|
|
uint32_t flags = xEventGroupWaitBits(eventFlag, RMT_FLAGS_ALL,
|
|
|
|
pdTRUE /* clear on exit */, pdFALSE /* wait for all bits */, timeout);
|
|
|
|
if (flags & RMT_FLAG_ERROR) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
float rmtSetTick(rmt_obj_t* rmt, float tick)
|
|
|
|
{
|
|
|
|
if (!rmt) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
divider field span from 1 (smallest), 2, 3, ... , 0xFF, 0x00 (highest)
|
|
|
|
* rmt tick from 1/80M -> 12.5ns (1x) div_cnt = 0x01
|
|
|
|
3.2 us (256x) div_cnt = 0x00
|
|
|
|
* rmt tick for 1 MHz -> 1us (1x) div_cnt = 0x01
|
|
|
|
256us (256x) div_cnt = 0x00
|
|
|
|
*/
|
|
|
|
int apb_div = _LIMIT(tick/12.5, 256);
|
|
|
|
int ref_div = _LIMIT(tick/1000, 256);
|
|
|
|
|
|
|
|
float apb_tick = 12.5 * apb_div;
|
|
|
|
float ref_tick = 1000.0 * ref_div;
|
|
|
|
|
|
|
|
size_t channel = rmt->channel;
|
|
|
|
|
|
|
|
if (_ABS(apb_tick - tick) < _ABS(ref_tick - tick)) {
|
|
|
|
RMT.conf_ch[channel].conf0.div_cnt = apb_div & 0xFF;
|
|
|
|
RMT.conf_ch[channel].conf1.ref_always_on = 1;
|
|
|
|
return apb_tick;
|
|
|
|
} else {
|
|
|
|
RMT.conf_ch[channel].conf0.div_cnt = ref_div & 0xFF;
|
|
|
|
RMT.conf_ch[channel].conf1.ref_always_on = 0;
|
|
|
|
return ref_tick;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
rmt_obj_t* rmtInit(int pin, bool tx_not_rx, rmt_reserve_memsize_t memsize)
|
|
|
|
{
|
|
|
|
int buffers = memsize;
|
|
|
|
rmt_obj_t* rmt;
|
|
|
|
size_t i;
|
|
|
|
size_t j;
|
|
|
|
|
|
|
|
// create common block mutex for protecting allocs from multiple threads
|
|
|
|
if (!g_rmt_block_lock) {
|
|
|
|
g_rmt_block_lock = xSemaphoreCreateMutex();
|
|
|
|
}
|
|
|
|
// lock
|
|
|
|
while (xSemaphoreTake(g_rmt_block_lock, portMAX_DELAY) != pdPASS) {}
|
|
|
|
|
|
|
|
for (i=0; i<MAX_CHANNELS; i++) {
|
|
|
|
for (j=0; j<buffers && i+j < MAX_CHANNELS; j++) {
|
|
|
|
// if the space is ocupied break and continue on other channel
|
|
|
|
if (g_rmt_objects[i+j].allocated) {
|
|
|
|
i += j; // continue searching from latter channel
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (j == buffers) {
|
|
|
|
// found a space in channel descriptors
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
2020-01-20 14:31:44 +01:00
|
|
|
if (i == MAX_CHANNELS || i+j > MAX_CHANNELS || j != buffers) {
|
2018-09-17 23:19:27 +02:00
|
|
|
xSemaphoreGive(g_rmt_block_lock);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
rmt = _rmtAllocate(pin, i, buffers);
|
|
|
|
|
|
|
|
xSemaphoreGive(g_rmt_block_lock);
|
|
|
|
|
|
|
|
size_t channel = i;
|
|
|
|
|
|
|
|
#if !CONFIG_DISABLE_HAL_LOCKS
|
|
|
|
if(g_rmt_objlocks[channel] == NULL) {
|
|
|
|
g_rmt_objlocks[channel] = xSemaphoreCreateMutex();
|
|
|
|
if(g_rmt_objlocks[channel] == NULL) {
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
RMT_MUTEX_LOCK(channel);
|
|
|
|
|
|
|
|
rmt->pin = pin;
|
|
|
|
rmt->tx_not_rx = tx_not_rx;
|
|
|
|
rmt->buffers =buffers;
|
|
|
|
rmt->channel = channel;
|
2020-10-14 13:41:50 +02:00
|
|
|
rmt->arg = NULL;
|
|
|
|
|
2018-09-17 23:19:27 +02:00
|
|
|
_initPin(pin, channel, tx_not_rx);
|
|
|
|
|
|
|
|
// Initialize the registers in default mode:
|
|
|
|
// - no carrier, filter
|
|
|
|
// - timebase tick of 1us
|
|
|
|
// - idle threshold set to 0x8000 (max pulse width + 1)
|
|
|
|
RMT.conf_ch[channel].conf0.div_cnt = 1;
|
|
|
|
RMT.conf_ch[channel].conf0.mem_size = buffers;
|
|
|
|
RMT.conf_ch[channel].conf0.carrier_en = 0;
|
|
|
|
RMT.conf_ch[channel].conf0.carrier_out_lv = 0;
|
|
|
|
RMT.conf_ch[channel].conf0.mem_pd = 0;
|
|
|
|
|
|
|
|
RMT.conf_ch[channel].conf0.idle_thres = 0x80;
|
|
|
|
RMT.conf_ch[channel].conf1.rx_en = 0;
|
|
|
|
RMT.conf_ch[channel].conf1.tx_conti_mode = 0;
|
|
|
|
RMT.conf_ch[channel].conf1.ref_cnt_rst = 0;
|
|
|
|
RMT.conf_ch[channel].conf1.rx_filter_en = 0;
|
|
|
|
RMT.conf_ch[channel].conf1.rx_filter_thres = 0;
|
|
|
|
RMT.conf_ch[channel].conf1.idle_out_lv = 0; // signal level for idle
|
|
|
|
RMT.conf_ch[channel].conf1.idle_out_en = 1; // enable idle
|
|
|
|
RMT.conf_ch[channel].conf1.ref_always_on = 0; // base clock
|
2020-10-14 13:41:50 +02:00
|
|
|
|
2018-09-17 23:19:27 +02:00
|
|
|
RMT.apb_conf.fifo_mask = 1;
|
|
|
|
|
|
|
|
if (tx_not_rx) {
|
|
|
|
// RMT.conf_ch[channel].conf1.rx_en = 0;
|
|
|
|
RMT.conf_ch[channel].conf1.mem_owner = 0;
|
|
|
|
RMT.conf_ch[channel].conf1.mem_rd_rst = 1;
|
|
|
|
} else {
|
|
|
|
// RMT.conf_ch[channel].conf1.rx_en = 1;
|
|
|
|
RMT.conf_ch[channel].conf1.mem_owner = 1;
|
|
|
|
RMT.conf_ch[channel].conf1.mem_wr_rst = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
// install interrupt if at least one channel is active
|
|
|
|
if (!intr_handle) {
|
|
|
|
esp_intr_alloc(ETS_RMT_INTR_SOURCE, (int)ESP_INTR_FLAG_IRAM, _rmt_isr, NULL, &intr_handle);
|
|
|
|
}
|
|
|
|
RMT_MUTEX_UNLOCK(channel);
|
|
|
|
|
|
|
|
return rmt;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Private methods definitions
|
|
|
|
*/
|
2020-01-20 18:43:13 +01:00
|
|
|
bool _rmtSendOnce(rmt_obj_t* rmt, rmt_data_t* data, size_t size, bool continuous)
|
2018-09-17 23:19:27 +02:00
|
|
|
{
|
|
|
|
if (!rmt) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
int channel = rmt->channel;
|
|
|
|
RMT.apb_conf.fifo_mask = 1;
|
|
|
|
if (data && size>0) {
|
|
|
|
size_t i;
|
|
|
|
volatile uint32_t* rmt_mem_ptr = &(RMTMEM.chan[channel].data32[0].val);
|
|
|
|
for (i = 0; i < size; i++) {
|
|
|
|
*rmt_mem_ptr++ = data[i].val;
|
|
|
|
}
|
|
|
|
// tx end mark
|
|
|
|
RMTMEM.chan[channel].data32[size].val = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
RMT_MUTEX_LOCK(channel);
|
2020-01-20 18:43:13 +01:00
|
|
|
RMT.conf_ch[channel].conf1.tx_conti_mode = continuous;
|
2018-09-17 23:19:27 +02:00
|
|
|
RMT.conf_ch[channel].conf1.mem_rd_rst = 1;
|
|
|
|
RMT.conf_ch[channel].conf1.tx_start = 1;
|
|
|
|
RMT_MUTEX_UNLOCK(channel);
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static rmt_obj_t* _rmtAllocate(int pin, int from, int size)
|
|
|
|
{
|
|
|
|
size_t i;
|
|
|
|
// setup how many buffers shall we use
|
|
|
|
g_rmt_objects[from].buffers = size;
|
|
|
|
|
|
|
|
for (i=0; i<size; i++) {
|
|
|
|
// mark the block of channels as used
|
|
|
|
g_rmt_objects[i+from].allocated = true;
|
|
|
|
}
|
|
|
|
return &(g_rmt_objects[from]);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void _initPin(int pin, int channel, bool tx_not_rx)
|
|
|
|
{
|
|
|
|
if (!periph_enabled) {
|
|
|
|
periph_enabled = true;
|
|
|
|
periph_module_enable( PERIPH_RMT_MODULE );
|
|
|
|
}
|
|
|
|
if (tx_not_rx) {
|
|
|
|
pinMode(pin, OUTPUT);
|
|
|
|
pinMatrixOutAttach(pin, RMT_SIG_OUT0_IDX + channel, 0, 0);
|
|
|
|
} else {
|
|
|
|
pinMode(pin, INPUT);
|
|
|
|
pinMatrixInAttach(pin, RMT_SIG_IN0_IDX + channel, 0);
|
|
|
|
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void IRAM_ATTR _rmt_isr(void* arg)
|
|
|
|
{
|
|
|
|
int intr_val = RMT.int_st.val;
|
|
|
|
size_t ch;
|
|
|
|
for (ch = 0; ch < MAX_CHANNELS; ch++) {
|
|
|
|
|
|
|
|
if (intr_val & _INT_RX_END(ch)) {
|
|
|
|
// clear the flag
|
|
|
|
RMT.int_clr.val = _INT_RX_END(ch);
|
|
|
|
RMT.int_ena.val &= ~_INT_RX_END(ch);
|
|
|
|
|
|
|
|
if ((g_rmt_objects[ch].intr_mode) & E_RX_INTR) {
|
|
|
|
if (g_rmt_objects[ch].events) {
|
|
|
|
xEventGroupSetBits(g_rmt_objects[ch].events, RMT_FLAG_RX_DONE);
|
|
|
|
}
|
|
|
|
if (g_rmt_objects[ch].data_ptr && g_rmt_objects[ch].data_size > 0) {
|
|
|
|
size_t i;
|
|
|
|
uint32_t * data = g_rmt_objects[ch].data_ptr;
|
|
|
|
// in case of callback, provide switching between memories
|
|
|
|
if (g_rmt_objects[ch].cb) {
|
|
|
|
if (g_rmt_objects[ch].tx_state & E_FIRST_HALF) {
|
|
|
|
g_rmt_objects[ch].tx_state &= ~E_FIRST_HALF;
|
|
|
|
} else {
|
|
|
|
g_rmt_objects[ch].tx_state |= E_FIRST_HALF;
|
|
|
|
data += MAX_DATA_PER_CHANNEL*(g_rmt_objects[ch].buffers);
|
|
|
|
}
|
|
|
|
}
|
2019-01-22 10:29:32 +01:00
|
|
|
uint32_t *data_received = data;
|
2018-09-17 23:19:27 +02:00
|
|
|
for (i = 0; i < g_rmt_objects[ch].data_size; i++ ) {
|
|
|
|
*data++ = RMTMEM.chan[ch].data32[i].val;
|
|
|
|
}
|
|
|
|
if (g_rmt_objects[ch].cb) {
|
2019-01-22 10:29:32 +01:00
|
|
|
// actually received data ptr
|
2020-10-14 13:41:50 +02:00
|
|
|
(g_rmt_objects[ch].cb)(data_received, _rmt_get_mem_len(ch), g_rmt_objects[ch].arg);
|
2018-09-17 23:19:27 +02:00
|
|
|
|
|
|
|
// restart the reception
|
|
|
|
RMT.conf_ch[ch].conf1.mem_owner = 1;
|
|
|
|
RMT.conf_ch[ch].conf1.mem_wr_rst = 1;
|
|
|
|
RMT.conf_ch[ch].conf1.rx_en = 1;
|
|
|
|
RMT.int_ena.val |= _INT_RX_END(ch);
|
|
|
|
} else {
|
|
|
|
// if not callback provide, expect only one Rx
|
|
|
|
g_rmt_objects[ch].intr_mode &= ~E_RX_INTR;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
// Report error and disable Rx interrupt
|
|
|
|
log_e("Unexpected Rx interrupt!\n"); // TODO: eplace messages with log_X
|
|
|
|
RMT.int_ena.val &= ~_INT_RX_END(ch);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
if (intr_val & _INT_ERROR(ch)) {
|
|
|
|
// clear the flag
|
|
|
|
RMT.int_clr.val = _INT_ERROR(ch);
|
|
|
|
RMT.int_ena.val &= ~_INT_ERROR(ch);
|
|
|
|
// report error
|
|
|
|
log_e("RMT Error %d!\n", ch);
|
|
|
|
if (g_rmt_objects[ch].events) {
|
|
|
|
xEventGroupSetBits(g_rmt_objects[ch].events, RMT_FLAG_ERROR);
|
|
|
|
}
|
|
|
|
// reset memory
|
|
|
|
RMT.conf_ch[ch].conf1.mem_rd_rst = 1;
|
|
|
|
RMT.conf_ch[ch].conf1.mem_rd_rst = 0;
|
|
|
|
RMT.conf_ch[ch].conf1.mem_wr_rst = 1;
|
|
|
|
RMT.conf_ch[ch].conf1.mem_wr_rst = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (intr_val & _INT_TX_END(ch)) {
|
|
|
|
|
|
|
|
RMT.int_clr.val = _INT_TX_END(ch);
|
|
|
|
_rmt_tx_mem_second(ch);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (intr_val & _INT_THR_EVNT(ch)) {
|
|
|
|
// clear the flag
|
|
|
|
RMT.int_clr.val = _INT_THR_EVNT(ch);
|
|
|
|
|
|
|
|
// initial setup of continuous mode
|
|
|
|
if (g_rmt_objects[ch].tx_state & E_SET_CONTI) {
|
|
|
|
RMT.conf_ch[ch].conf1.tx_conti_mode = 1;
|
|
|
|
g_rmt_objects[ch].intr_mode &= ~E_SET_CONTI;
|
|
|
|
}
|
|
|
|
_rmt_tx_mem_first(ch);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void IRAM_ATTR _rmt_tx_mem_second(uint8_t ch)
|
|
|
|
{
|
|
|
|
DEBUG_INTERRUPT_START(4)
|
|
|
|
uint32_t* data = g_rmt_objects[ch].data_ptr;
|
|
|
|
int half_tx_nr = MAX_DATA_PER_ITTERATION/2;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
RMT.tx_lim_ch[ch].limit = half_tx_nr+2;
|
|
|
|
RMT.int_clr.val = _INT_THR_EVNT(ch);
|
|
|
|
RMT.int_ena.val |= _INT_THR_EVNT(ch);
|
|
|
|
|
|
|
|
g_rmt_objects[ch].tx_state |= E_FIRST_HALF;
|
|
|
|
|
|
|
|
if (data) {
|
|
|
|
int remaining_size = g_rmt_objects[ch].data_size;
|
|
|
|
// will the remaining data occupy the entire halfbuffer
|
|
|
|
if (remaining_size > half_tx_nr) {
|
|
|
|
for (i = 0; i < half_tx_nr; i++) {
|
|
|
|
RMTMEM.chan[ch].data32[half_tx_nr+i].val = data[i];
|
|
|
|
}
|
|
|
|
g_rmt_objects[ch].data_size -= half_tx_nr;
|
|
|
|
g_rmt_objects[ch].data_ptr += half_tx_nr;
|
|
|
|
} else {
|
|
|
|
for (i = 0; i < half_tx_nr; i++) {
|
|
|
|
if (i < remaining_size) {
|
|
|
|
RMTMEM.chan[ch].data32[half_tx_nr+i].val = data[i];
|
|
|
|
} else {
|
|
|
|
RMTMEM.chan[ch].data32[half_tx_nr+i].val = 0x000F000F;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
g_rmt_objects[ch].data_ptr = NULL;
|
|
|
|
|
|
|
|
}
|
|
|
|
} else if ((!(g_rmt_objects[ch].tx_state & E_LAST_DATA)) &&
|
|
|
|
(!(g_rmt_objects[ch].tx_state & E_END_TRANS))) {
|
|
|
|
for (i = 0; i < half_tx_nr; i++) {
|
|
|
|
RMTMEM.chan[ch].data32[half_tx_nr+i].val = 0x000F000F;
|
|
|
|
}
|
|
|
|
RMTMEM.chan[ch].data32[half_tx_nr+i].val = 0;
|
|
|
|
g_rmt_objects[ch].tx_state |= E_LAST_DATA;
|
|
|
|
RMT.conf_ch[ch].conf1.tx_conti_mode = 0;
|
|
|
|
} else {
|
|
|
|
log_d("RMT Tx finished %d!\n", ch);
|
|
|
|
RMT.conf_ch[ch].conf1.tx_conti_mode = 0;
|
|
|
|
RMT.int_ena.val &= ~_INT_TX_END(ch);
|
|
|
|
RMT.int_ena.val &= ~_INT_THR_EVNT(ch);
|
|
|
|
g_rmt_objects[ch].intr_mode = E_NO_INTR;
|
|
|
|
g_rmt_objects[ch].tx_state = E_INACTIVE;
|
|
|
|
}
|
|
|
|
DEBUG_INTERRUPT_END(4);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void IRAM_ATTR _rmt_tx_mem_first(uint8_t ch)
|
|
|
|
{
|
|
|
|
DEBUG_INTERRUPT_START(2);
|
|
|
|
uint32_t* data = g_rmt_objects[ch].data_ptr;
|
|
|
|
int half_tx_nr = MAX_DATA_PER_ITTERATION/2;
|
|
|
|
int i;
|
|
|
|
RMT.int_ena.val &= ~_INT_THR_EVNT(ch);
|
|
|
|
RMT.tx_lim_ch[ch].limit = 0;
|
|
|
|
|
|
|
|
if (data) {
|
|
|
|
int remaining_size = g_rmt_objects[ch].data_size;
|
|
|
|
|
|
|
|
// will the remaining data occupy the entire halfbuffer
|
|
|
|
if (remaining_size > half_tx_nr) {
|
|
|
|
RMTMEM.chan[ch].data32[0].val = data[0] - 1;
|
|
|
|
for (i = 1; i < half_tx_nr; i++) {
|
|
|
|
RMTMEM.chan[ch].data32[i].val = data[i];
|
|
|
|
}
|
|
|
|
g_rmt_objects[ch].tx_state &= ~E_FIRST_HALF;
|
|
|
|
// turn off the treshold interrupt
|
|
|
|
RMT.int_ena.val &= ~_INT_THR_EVNT(ch);
|
|
|
|
RMT.tx_lim_ch[ch].limit = 0;
|
|
|
|
g_rmt_objects[ch].data_size -= half_tx_nr;
|
|
|
|
g_rmt_objects[ch].data_ptr += half_tx_nr;
|
|
|
|
} else {
|
|
|
|
RMTMEM.chan[ch].data32[0].val = data[0] - 1;
|
|
|
|
for (i = 1; i < half_tx_nr; i++) {
|
|
|
|
if (i < remaining_size) {
|
|
|
|
RMTMEM.chan[ch].data32[i].val = data[i];
|
|
|
|
} else {
|
|
|
|
RMTMEM.chan[ch].data32[i].val = 0x000F000F;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
g_rmt_objects[ch].tx_state &= ~E_FIRST_HALF;
|
|
|
|
g_rmt_objects[ch].data_ptr = NULL;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
for (i = 0; i < half_tx_nr; i++) {
|
|
|
|
RMTMEM.chan[ch].data32[i].val = 0x000F000F;
|
|
|
|
}
|
|
|
|
RMTMEM.chan[ch].data32[i].val = 0;
|
|
|
|
|
|
|
|
g_rmt_objects[ch].tx_state &= ~E_FIRST_HALF;
|
|
|
|
RMT.tx_lim_ch[ch].limit = 0;
|
|
|
|
g_rmt_objects[ch].tx_state |= E_LAST_DATA;
|
|
|
|
RMT.conf_ch[ch].conf1.tx_conti_mode = 0;
|
|
|
|
}
|
|
|
|
DEBUG_INTERRUPT_END(2);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int IRAM_ATTR _rmt_get_mem_len(uint8_t channel)
|
|
|
|
{
|
|
|
|
int block_num = RMT.conf_ch[channel].conf0.mem_size;
|
|
|
|
int item_block_len = block_num * 64;
|
|
|
|
volatile rmt_item32_t* data = RMTMEM.chan[channel].data32;
|
|
|
|
int idx;
|
|
|
|
for(idx = 0; idx < item_block_len; idx++) {
|
|
|
|
if(data[idx].duration0 == 0) {
|
|
|
|
return idx;
|
|
|
|
} else if(data[idx].duration1 == 0) {
|
|
|
|
return idx + 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return idx;
|
|
|
|
}
|