arduino-esp32/tools/sdk/include/config/sdkconfig.h

/*
 *
 * Automatically generated file; DO NOT EDIT.
 * Espressif IoT Development Framework Configuration
 *
 */
#define CONFIG_ESP32_PHY_MAX_TX_POWER 20
#define CONFIG_TRACEMEM_RESERVE_DRAM 0x0
#define CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE 1
#define CONFIG_MEMMAP_BT 1
#define CONFIG_ESPTOOLPY_FLASHSIZE_4MB 1
#define CONFIG_ESPTOOLPY_FLASHFREQ "80m"
#define CONFIG_NEWLIB_STDOUT_ADDCR 1
#define CONFIG_ESPTOOLPY_FLASHSIZE "4MB"
#define CONFIG_ETHERNET 1
#define CONFIG_EMAC_L2_TO_L3_RX_BUF_MODE 1
#define CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL 1
#define CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1
#define CONFIG_BT_RESERVE_DRAM 0x10000
#define CONFIG_LOG_BOOTLOADER_LEVEL_ERROR 1
#define CONFIG_CONSOLE_UART_BAUDRATE 115200
#define CONFIG_LWIP_MAX_SOCKETS 4
#define CONFIG_ESP32_ENABLE_STACK_BT 1
#define CONFIG_EMAC_TASK_PRIORITY 20
#define CONFIG_ULP_COPROC_RESERVE_MEM 512
#define CONFIG_ESPTOOLPY_BAUD 921600
#define CONFIG_TOOLPREFIX "xtensa-esp32-elf-"
#define CONFIG_CONSOLE_UART_NUM 0
#define CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC 1
#define CONFIG_LWIP_THREAD_LOCAL_STORAGE_INDEX 0
#define CONFIG_CONSOLE_UART_DEFAULT 1
#define CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN 16384
#define CONFIG_AUTOSTART_ARDUINO 1
#define CONFIG_ESP32_ENABLE_STACK_WIFI 1
#define CONFIG_LOG_DEFAULT_LEVEL_ERROR 1
#define CONFIG_MBEDTLS_MPI_USE_INTERRUPT 1
#define CONFIG_MAIN_TASK_STACK_SIZE 4096
#define CONFIG_ESPTOOLPY_FLASHMODE "dio"
#define CONFIG_BTC_TASK_STACK_SIZE 2048
#define CONFIG_LOG_DEFAULT_LEVEL 1
#define CONFIG_ULP_COPROC_ENABLED 1
#define CONFIG_DMA_RX_BUF_NUM 10
#define CONFIG_ESPTOOLPY_FLASHMODE_DIO 1
#define CONFIG_PYTHON "python"
#define CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1 1
#define CONFIG_ESPTOOLPY_COMPRESSED 1
#define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv"
#define CONFIG_LWIP_DHCP_MAX_NTP_SERVERS 1
#define CONFIG_PARTITION_TABLE_SINGLE_APP 1
#define CONFIG_WIFI_ENABLED 1
#define CONFIG_ESPTOOLPY_FLASHFREQ_80M 1
#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE 2048
#define CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY 0
#define CONFIG_PHY_DATA_OFFSET 0xf000
#define CONFIG_PARTITION_TABLE_CUSTOM_APP_BIN_OFFSET 0x10000
#define CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ 240
#define CONFIG_MBEDTLS_HARDWARE_AES 1
#define CONFIG_FREERTOS_HZ 1000
#define CONFIG_FREERTOS_ASSERT_FAIL_ABORT 1
#define CONFIG_MONITOR_BAUD_115200B 1
#define CONFIG_LOG_BOOTLOADER_LEVEL 1
#define CONFIG_ESPTOOLPY_BAUD_OTHER_VAL 115200
#define CONFIG_ESP32_DEFAULT_CPU_FREQ_240 1
#define CONFIG_LWIP_SO_REUSE 1
#define CONFIG_DMA_TX_BUF_NUM 10
#define CONFIG_BT_ENABLED 1
#define CONFIG_MONITOR_BAUD 115200
#define CONFIG_MBEDTLS_HARDWARE_SHA 1
#define CONFIG_FREERTOS_CORETIMER_0 1
#define CONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv"
#define CONFIG_MBEDTLS_HAVE_TIME 1
#define CONFIG_FREERTOS_ISR_STACKSIZE 1536
#define CONFIG_SYSTEM_EVENT_QUEUE_SIZE 32
#define CONFIG_ESPTOOLPY_BAUD_921600B 1
#define CONFIG_APP_OFFSET 0x10000
#define CONFIG_MEMMAP_SMP 1
#define CONFIG_MBEDTLS_HARDWARE_MPI 1
#define CONFIG_MONITOR_BAUD_OTHER_VAL 115200
#define CONFIG_ESPTOOLPY_PORT "/dev/tty.SLAB_USBtoUART"
#define CONFIG_OPTIMIZATION_LEVEL_RELEASE 1
#define CONFIG_ESP32_PANIC_PRINT_HALT 1
#define CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL_ERROR 1