ESP32: Add DeepSleep examples (#473)
*Added a Timer wakeup example *Added a Touch wakeup example *Added an external source wakeup example
This commit is contained in:
Pranav Cherukupalli
Me No Dev
parent
cfde557916
commit
1be6a5c361
@ -0,0 +1,82 @@
|
||||
/*
|
||||
Deep Sleep with External Wake Up
|
||||
=====================================
|
||||
This code displays how to use deep sleep with
|
||||
an external trigger as a wake up source and how
|
||||
to store data in RTC memory to use it over reboots
|
||||
|
||||
This code is under Public Domain License.
|
||||
|
||||
Hardware Connections
|
||||
======================
|
||||
Push Button to GPIO 33 pulled down with a 10K Ohm
|
||||
resistor
|
||||
|
||||
NOTE:
|
||||
======
|
||||
Only RTC IO can be used as a source for external wake
|
||||
source. They are pins: 0,2,4,12-15,25-27,32-39.
|
||||
|
||||
Author:
|
||||
Pranav Cherukupalli <cherukupallip@gmail.com>
|
||||
*/
|
||||
|
||||
#define BUTTON_PIN_BITMASK 0x200000000 // 2^33 in hex
|
||||
|
||||
RTC_DATA_ATTR int bootCount = 0;
|
||||
|
||||
/*
|
||||
Method to print the reason by which ESP32
|
||||
has been awaken from sleep
|
||||
*/
|
||||
void print_wakeup_reason(){
|
||||
esp_deep_sleep_wakeup_cause_t wakeup_reason;
|
||||
|
||||
wakeup_reason = esp_deep_sleep_get_wakeup_cause();
|
||||
|
||||
switch(wakeup_reason)
|
||||
{
|
||||
case 1 : Serial.println("Wakeup caused by external signal using RTC_IO"); break;
|
||||
case 2 : Serial.println("Wakeup caused by external signal using RTC_CNTL"); break;
|
||||
case 3 : Serial.println("Wakeup caused by timer"); break;
|
||||
case 4 : Serial.println("Wakeup caused by touchpad"); break;
|
||||
case 5 : Serial.println("Wakeup caused by ULP program"); break;
|
||||
default : Serial.println("Wakeup was not caused by deep sleep"); break;
|
||||
}
|
||||
}
|
||||
|
||||
void setup(){
|
||||
Serial.begin(115200);
|
||||
delay(1000); //Take some time to open up the Serial Monitor
|
||||
|
||||
//Increment boot number and print it every reboot
|
||||
++bootCount;
|
||||
Serial.println("Boot number: " + String(bootCount));
|
||||
|
||||
//Print the wakeup reason for ESP32
|
||||
print_wakeup_reason();
|
||||
|
||||
/*
|
||||
First we configure the wake up source
|
||||
We set our ESP32 to wake up for an external trigger.
|
||||
There are two types for ESP32, ext0 and ext1 .
|
||||
ext0 uses RTC_IO to wakeup thus requires RTC peripherals
|
||||
to be on while ext1 uses RTC Controller so doesnt need
|
||||
peripherals to be powered on.
|
||||
Note that using internal pullups/pulldowns also requires
|
||||
RTC peripherals to be turned on.
|
||||
*/
|
||||
esp_deep_sleep_enable_ext0_wakeup(GPIO_NUM_33,1); //1 = High, 0 = Low
|
||||
|
||||
//If you were to use ext1, you would use it like
|
||||
//esp_deep_sleep_enable_ext1_wakeup(BUTTON_PIN_BITMASK,ESP_EXT1_WAKEUP_ANY_HIGH);
|
||||
|
||||
//Go to sleep now
|
||||
Serial.println("Going to sleep now");
|
||||
esp_deep_sleep_start();
|
||||
Serial.println("This will never be printed");
|
||||
}
|
||||
|
||||
void loop(){
|
||||
//This is not going to be called
|
||||
}
|
||||
@ -0,0 +1,93 @@
|
||||
/*
|
||||
Simple Deep Sleep with Timer Wake Up
|
||||
=====================================
|
||||
ESP32 offers a deep sleep mode for effective power
|
||||
saving as power is an important factor for IoT
|
||||
applications. In this mode CPUs, most of the RAM,
|
||||
and all the digital peripherals which are clocked
|
||||
from APB_CLK are powered off. The only parts of
|
||||
the chip which can still be powered on are:
|
||||
RTC controller, RTC peripherals ,and RTC memories
|
||||
|
||||
This code displays the most basic deep sleep with
|
||||
a timer to wake it up and how to store data in
|
||||
RTC memory to use it over reboots
|
||||
|
||||
This code is under Public Domain License.
|
||||
|
||||
Author:
|
||||
Pranav Cherukupalli <cherukupallip@gmail.com>
|
||||
*/
|
||||
|
||||
#define uS_TO_S_FACTOR 1000000 /* Conversion factor for micro seconds to seconds */
|
||||
#define TIME_TO_SLEEP 5 /* Time ESP32 will go to sleep (in seconds) */
|
||||
|
||||
RTC_DATA_ATTR int bootCount = 0;
|
||||
|
||||
/*
|
||||
Method to print the reason by which ESP32
|
||||
has been awaken from sleep
|
||||
*/
|
||||
void print_wakeup_reason(){
|
||||
esp_deep_sleep_wakeup_cause_t wakeup_reason;
|
||||
|
||||
wakeup_reason = esp_deep_sleep_get_wakeup_cause();
|
||||
|
||||
switch(wakeup_reason)
|
||||
{
|
||||
case 1 : Serial.println("Wakeup caused by external signal using RTC_IO"); break;
|
||||
case 2 : Serial.println("Wakeup caused by external signal using RTC_CNTL"); break;
|
||||
case 3 : Serial.println("Wakeup caused by timer"); break;
|
||||
case 4 : Serial.println("Wakeup caused by touchpad"); break;
|
||||
case 5 : Serial.println("Wakeup caused by ULP program"); break;
|
||||
default : Serial.println("Wakeup was not caused by deep sleep"); break;
|
||||
}
|
||||
}
|
||||
|
||||
void setup(){
|
||||
Serial.begin(115200);
|
||||
delay(1000); //Take some time to open up the Serial Monitor
|
||||
|
||||
//Increment boot number and print it every reboot
|
||||
++bootCount;
|
||||
Serial.println("Boot number: " + String(bootCount));
|
||||
|
||||
//Print the wakeup reason for ESP32
|
||||
print_wakeup_reason();
|
||||
|
||||
/*
|
||||
First we configure the wake up source
|
||||
We set our ESP32 to wake up every 5 seconds
|
||||
*/
|
||||
esp_deep_sleep_enable_timer_wakeup(TIME_TO_SLEEP * uS_TO_S_FACTOR);
|
||||
Serial.println("Setup ESP32 to sleep for every " + String(TIME_TO_SLEEP) +
|
||||
" Seconds");
|
||||
|
||||
/*
|
||||
Next we decide what all peripherals to shut down/keep on
|
||||
By default, ESP32 will automatically power down the peripherals
|
||||
not needed by the wakeup source, but if you want to be a poweruser
|
||||
this is for you. Read in detail at the API docs
|
||||
http://esp-idf.readthedocs.io/en/latest/api-reference/system/deep_sleep.html
|
||||
Left the line commented as an example of how to configure peripherals.
|
||||
The line below turns off all RTC peripherals in deep sleep.
|
||||
*/
|
||||
//esp_deep_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_OFF);
|
||||
//Serial.println("Configured all RTC Peripherals to be powered down in sleep");
|
||||
|
||||
/*
|
||||
Now that we have setup a wake cause and if needed setup the
|
||||
peripherals state in deep sleep, we can now start going to
|
||||
deep sleep.
|
||||
In the case that no wake up sources were provided but deep
|
||||
sleep was started, it will sleep forever unless hardware
|
||||
reset occurs.
|
||||
*/
|
||||
Serial.println("Going to sleep now");
|
||||
esp_deep_sleep_start();
|
||||
Serial.println("This will never be printed");
|
||||
}
|
||||
|
||||
void loop(){
|
||||
//This is not going to be called
|
||||
}
|
||||
@ -0,0 +1,93 @@
|
||||
/*
|
||||
Deep Sleep with Touch Wake Up
|
||||
=====================================
|
||||
This code displays how to use deep sleep with
|
||||
a touch as a wake up source and how to store data in
|
||||
RTC memory to use it over reboots
|
||||
|
||||
This code is under Public Domain License.
|
||||
|
||||
Author:
|
||||
Pranav Cherukupalli <cherukupallip@gmail.com>
|
||||
*/
|
||||
|
||||
#define Threshold 40 /* Greater the value, more the sensitivity */
|
||||
|
||||
RTC_DATA_ATTR int bootCount = 0;
|
||||
touch_pad_t touchPin;
|
||||
/*
|
||||
Method to print the reason by which ESP32
|
||||
has been awaken from sleep
|
||||
*/
|
||||
void print_wakeup_reason(){
|
||||
esp_deep_sleep_wakeup_cause_t wakeup_reason;
|
||||
|
||||
wakeup_reason = esp_deep_sleep_get_wakeup_cause();
|
||||
|
||||
switch(wakeup_reason)
|
||||
{
|
||||
case 1 : Serial.println("Wakeup caused by external signal using RTC_IO"); break;
|
||||
case 2 : Serial.println("Wakeup caused by external signal using RTC_CNTL"); break;
|
||||
case 3 : Serial.println("Wakeup caused by timer"); break;
|
||||
case 4 : Serial.println("Wakeup caused by touchpad"); break;
|
||||
case 5 : Serial.println("Wakeup caused by ULP program"); break;
|
||||
default : Serial.println("Wakeup was not caused by deep sleep"); break;
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
Method to print the touchpad by which ESP32
|
||||
has been awaken from sleep
|
||||
*/
|
||||
void print_wakeup_touchpad(){
|
||||
touch_pad_t pin;
|
||||
|
||||
touchPin = esp_deep_sleep_get_touchpad_wakeup_status();
|
||||
|
||||
switch(touchPin)
|
||||
{
|
||||
case 0 : Serial.println("Touch detected on GPIO 4"); break;
|
||||
case 1 : Serial.println("Touch detected on GPIO 0"); break;
|
||||
case 2 : Serial.println("Touch detected on GPIO 2"); break;
|
||||
case 3 : Serial.println("Touch detected on GPIO 15"); break;
|
||||
case 4 : Serial.println("Touch detected on GPIO 13"); break;
|
||||
case 5 : Serial.println("Touch detected on GPIO 12"); break;
|
||||
case 6 : Serial.println("Touch detected on GPIO 14"); break;
|
||||
case 7 : Serial.println("Touch detected on GPIO 27"); break;
|
||||
case 8 : Serial.println("Touch detected on GPIO 33"); break;
|
||||
case 9 : Serial.println("Touch detected on GPIO 32"); break;
|
||||
default : Serial.println("Wakeup not by touchpad"); break;
|
||||
}
|
||||
}
|
||||
|
||||
void callback(){
|
||||
//placeholder callback function
|
||||
}
|
||||
|
||||
void setup(){
|
||||
Serial.begin(115200);
|
||||
delay(1000); //Take some time to open up the Serial Monitor
|
||||
|
||||
//Increment boot number and print it every reboot
|
||||
++bootCount;
|
||||
Serial.println("Boot number: " + String(bootCount));
|
||||
|
||||
//Print the wakeup reason for ESP32 and touchpad too
|
||||
print_wakeup_reason();
|
||||
print_wakeup_touchpad();
|
||||
|
||||
//Setup interrupt on Touch Pad 3 (GPIO15)
|
||||
touchAttachInterrupt(T3, callback, Threshold);
|
||||
|
||||
//Configure Touchpad as wakeup source
|
||||
esp_deep_sleep_enable_touchpad_wakeup();
|
||||
|
||||
//Go to sleep now
|
||||
Serial.println("Going to sleep now");
|
||||
esp_deep_sleep_start();
|
||||
Serial.println("This will never be printed");
|
||||
}
|
||||
|
||||
void loop(){
|
||||
//This will never be reached
|
||||
}
|
||||
Loading…
Reference in New Issue
Block a user