Update README.md
This commit is contained in:
parent
e383a11291
commit
4395efa3fc
22
README.md
22
README.md
@ -10,24 +10,10 @@
|
|||||||
- [ESP32Dev Board PINMAP](#esp32dev-board-pinmap)
|
- [ESP32Dev Board PINMAP](#esp32dev-board-pinmap)
|
||||||
|
|
||||||
## Development Status
|
## Development Status
|
||||||
Not everything is working yet, you can not get it through package manager, but you can give it a go and help us find bugs in the things that are implemented :)
|
Most of the framework is implemented. Most noticable is the missing analogWrite. While analogWrite is on it's way, there are a few other options that you can use:
|
||||||
|
- 16 channels [LEDC](https://github.com/espressif/arduino-esp32/blob/master/cores/esp32/esp32-hal-ledc.h) which is PWM
|
||||||
The framework can also be downloaded as component in an IDF project and be used like that.
|
- 8 channels [SigmaDelta](https://github.com/espressif/arduino-esp32/blob/master/cores/esp32/esp32-hal-sd.h) which uses SigmaDelta modulation
|
||||||
|
- 2 channels [DAC](https://github.com/espressif/arduino-esp32/blob/master/cores/esp32/esp32-hal-dac.h) which gives real analog output
|
||||||
Things that work:
|
|
||||||
|
|
||||||
- pinMode
|
|
||||||
- digitalRead/digitalWrite
|
|
||||||
- attachInterrupt/detachInterrupt
|
|
||||||
- analogRead/touchRead/touchAttachInterrupt
|
|
||||||
- ledcWrite/sdWrite/dacWrite
|
|
||||||
- Serial (global Serial is attached to pins 1 and 3 by default, there are another 2 serials that you can attach to any pin)
|
|
||||||
- SPI (global SPI is attached to VSPI pins by default and HSPI can be attached to any pins)
|
|
||||||
- Wire (global Wire is attached to pins 21 and 22 by default and there is another I2C bus that you can attach to any pins)
|
|
||||||
- WiFi (about 99% the same as ESP8266)
|
|
||||||
|
|
||||||
WiFiClient, WiFiServer and WiFiUdp are not quite ready yet because there are still some small hiccups in LwIP to be overcome.
|
|
||||||
You can try WiFiClient but you need to disconnect the client yourself to be sure that connection is closed.
|
|
||||||
|
|
||||||
## Using Arduino IDE
|
## Using Arduino IDE
|
||||||
|
|
||||||
|
Loading…
Reference in New Issue
Block a user