Add Adafruit esp32s2 boards with custom bootloader, partition and upload.extra_flags (#5056)

done on behalf of @ladyada, this PR does:

Add Adafruit FunHouse and upcoming Adafruit Feather Esp32s2
Update Adafruit magtag and metro esp32s2 to have tinyuf2 as factory app
Also modify platform.txt as discussed in adafruit#2 + adafruit#3 + adafruit#4 to add support for
Board/variant partition.csv, bootloader.bin ( priority is user sketch > variant > build.parition/boot )
upload.extra_flags to optionally flash tinyuf2 as factory application
Remove duplicated parameter in running python script in linux and windows
Please review and let me know if you want any changes.

Notes: tinyuf2 is a uf2 bootloader for multiple platforms. For esp32s2, it is an factory app to perform uf2 firmware update.

platform.txt

@@ -111,11 +111,18 @@ build.loop_core=
 build.event_core=
 build.extra_flags=-DESP32 -DCORE_DEBUG_LEVEL={build.code_debug} {build.loop_core} {build.event_core} {build.defines} {build.extra_flags.{build.mcu}}
 
-# Check if custom partitions exist
+# Check if custom partitions exist: source > variant > build.partitions
 recipe.hooks.prebuild.1.pattern=bash -c "[ ! -f "{build.source.path}"/partitions.csv ] || cp -f "{build.source.path}"/partitions.csv "{build.path}"/partitions.csv"
-recipe.hooks.prebuild.2.pattern=bash -c "[ -f "{build.path}"/partitions.csv ] || cp "{runtime.platform.path}"/tools/partitions/{build.partitions}.csv "{build.path}"/partitions.csv"
+recipe.hooks.prebuild.2.pattern=bash -c "[ -f "{build.path}"/partitions.csv ] || [ ! -f "{build.variant.path}"/partitions.csv ] || cp "{build.variant.path}"/partitions.csv "{build.path}"/partitions.csv"
+recipe.hooks.prebuild.3.pattern=bash -c "[ -f "{build.path}"/partitions.csv ] || cp "{runtime.platform.path}"/tools/partitions/{build.partitions}.csv "{build.path}"/partitions.csv"
+
 recipe.hooks.prebuild.1.pattern.windows=cmd /c if exist "{build.source.path}\partitions.csv" COPY /y "{build.source.path}\partitions.csv" "{build.path}\partitions.csv"
-recipe.hooks.prebuild.2.pattern.windows=cmd /c if not exist "{build.path}\partitions.csv" COPY "{runtime.platform.path}\tools\partitions\{build.partitions}.csv" "{build.path}\partitions.csv"
+recipe.hooks.prebuild.2.pattern.windows=cmd /c if not exist "{build.path}\partitions.csv" if exist "{build.variant.path}\partitions.csv" COPY "{build.variant.path}\partitions.csv" "{build.path}\partitions.csv"
+recipe.hooks.prebuild.3.pattern.windows=cmd /c if not exist "{build.path}\partitions.csv" COPY "{runtime.platform.path}\tools\partitions\{build.partitions}.csv" "{build.path}\partitions.csv"
+
+# Check if custom bootloader exist: source > variant > build.boot
+recipe.hooks.prebuild.4.pattern=bash -c "[ -f "{build.source.path}"/bootloader.bin ] && cp -f "{build.source.path}"/bootloader.bin "{build.path}"/{build.project_name}.bootloader.bin || ( [ -f "{build.variant.path}"/bootloader.bin ] && cp "{build.variant.path}"/bootloader.bin "{build.path}"/{build.project_name}.bootloader.bin || cp -f "{runtime.platform.path}"/tools/sdk/{build.mcu}/bin/bootloader_{build.boot}_{build.flash_freq}.bin "{build.path}"/{build.project_name}.bootloader.bin )"
+recipe.hooks.prebuild.4.pattern.windows=cmd /c IF EXIST "{build.source.path}\bootloader.bin" ( COPY /y "{build.source.path}\bootloader.bin" "{build.path}\{build.project_name}.bootloader.bin" ) ELSE ( IF EXIST "{build.variant.path}\bootloader.bin" ( COPY "{build.variant.path}\bootloader.bin" "{build.path}\{build.project_name}.bootloader.bin" ) ELSE ( COPY /y "{runtime.platform.path}\tools\sdk\{build.mcu}\bin\bootloader_{build.boot}_{build.flash_freq}.bin" "{build.path}\{build.project_name}.bootloader.bin" ) )
 
 ## Compile c files
 recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.cpreprocessor.flags} {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} -DARDUINO_BOARD="{build.board}" -DARDUINO_VARIANT="{build.variant}" {compiler.c.extra_flags} {build.extra_flags} {includes} "{source_file}" -o "{object_file}"
@@ -136,8 +143,9 @@ recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" "-Wl,--Map={build
 recipe.objcopy.partitions.bin.pattern={tools.gen_esp32part.cmd} -q "{build.path}/partitions.csv" "{build.path}/{build.project_name}.partitions.bin"
 
 ## Create bin
-recipe.objcopy.bin.pattern="{tools.esptool_py.path}/{tools.esptool_py.cmd}" --chip {build.mcu} elf2image --flash_mode "{build.flash_mode}" --flash_freq "{build.flash_freq}" --flash_size "{build.flash_size}" -o "{build.path}/{build.project_name}.bin" "{build.path}/{build.project_name}.elf"
-recipe.objcopy.bin.pattern.linux=python "{tools.esptool_py.path}/{tools.esptool_py.cmd}" --chip {build.mcu} elf2image --flash_mode "{build.flash_mode}" --flash_freq "{build.flash_freq}" --flash_size "{build.flash_size}" -o "{build.path}/{build.project_name}.bin" "{build.path}/{build.project_name}.elf"
+recipe.objcopy.bin.pattern_args=--chip {build.mcu} elf2image --flash_mode "{build.flash_mode}" --flash_freq "{build.flash_freq}" --flash_size "{build.flash_size}" -o "{build.path}/{build.project_name}.bin" "{build.path}/{build.project_name}.elf"
+recipe.objcopy.bin.pattern="{tools.esptool_py.path}/{tools.esptool_py.cmd}" {recipe.objcopy.bin.pattern_args}
+recipe.objcopy.bin.pattern.linux=python "{tools.esptool_py.path}/{tools.esptool_py.cmd}" {recipe.objcopy.bin.pattern_args}
 
 ## Save bin
 recipe.output.tmp_file={build.project_name}.{build.mcu}.bin
@@ -153,6 +161,7 @@ recipe.size.regex.data=^(?:\.dram0\.data|\.dram0\.bss|\.noinit)\s+([0-9]+).*
 tools.esptool_py.upload.protocol=esp32
 tools.esptool_py.upload.params.verbose=
 tools.esptool_py.upload.params.quiet=
-tools.esptool_py.upload.pattern="{path}/{cmd}" --chip {build.mcu} --port "{serial.port}" --baud {upload.speed} {upload.flags} --before default_reset --after hard_reset write_flash -z --flash_mode {build.flash_mode} --flash_freq {build.flash_freq} --flash_size detect 0xe000 "{runtime.platform.path}/tools/partitions/boot_app0.bin" {build.bootloader_addr} "{runtime.platform.path}/tools/sdk/{build.mcu}/bin/bootloader_{build.boot}_{build.flash_freq}.bin" 0x10000 "{build.path}/{build.project_name}.bin" 0x8000 "{build.path}/{build.project_name}.partitions.bin"
-tools.esptool_py.upload.pattern.linux=python "{path}/{cmd}" --chip {build.mcu} --port "{serial.port}" --baud {upload.speed} {upload.flags} --before default_reset --after hard_reset write_flash -z --flash_mode {build.flash_mode} --flash_freq {build.flash_freq} --flash_size detect 0xe000 "{runtime.platform.path}/tools/partitions/boot_app0.bin" {build.bootloader_addr} "{runtime.platform.path}/tools/sdk/{build.mcu}/bin/bootloader_{build.boot}_{build.flash_freq}.bin" 0x10000 "{build.path}/{build.project_name}.bin" 0x8000 "{build.path}/{build.project_name}.partitions.bin"
+tools.esptool_py.upload.pattern_args=--chip {build.mcu} --port "{serial.port}" --baud {upload.speed} {upload.flags} --before default_reset --after hard_reset write_flash -z --flash_mode {build.flash_mode} --flash_freq {build.flash_freq} --flash_size detect 0xe000 "{runtime.platform.path}/tools/partitions/boot_app0.bin" {build.bootloader_addr} "{build.path}/{build.project_name}.bootloader.bin" 0x10000 "{build.path}/{build.project_name}.bin" 0x8000 "{build.path}/{build.project_name}.partitions.bin" {upload.extra_flags}
+tools.esptool_py.upload.pattern="{path}/{cmd}" {upload.pattern_args}
+tools.esptool_py.upload.pattern.linux=python "{path}/{cmd}" {upload.pattern_args}
 tools.esptool_py.upload.network_pattern={network_cmd} -i "{serial.port}" -p "{network.port}" "--auth={network.password}" -f "{build.path}/{build.project_name}.bin"

variants/adafruit_feather_esp32s2/partitions.csv

@@ -0,0 +1,11 @@
+# ESP-IDF Partition Table
+# Name,   Type, SubType, Offset,  Size, Flags
+# bootloader.bin,,          0x1000, 32K
+# partition table,          0x8000, 4K
+
+nvs,      data, nvs,      0x9000,  20K,
+otadata,  data, ota,      0xe000,  8K,
+ota_0,    0,    ota_0,   0x10000,  1408K,
+ota_1,    0,    ota_1,  0x170000,  1408K,
+uf2,      app,  factory,0x2d0000,  256K,
+ffat,     data, fat,    0x310000,  960K,

variants/adafruit_feather_esp32s2/pins_arduino.h

@@ -0,0 +1,62 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+
+#define USB_VID 0x239A
+#define USB_PID 0x80EB
+#define USB_MANUFACTURER "Adafruit"
+#define USB_PRODUCT "Adafruit Feather ESP32-S2"
+#define USB_SERIAL ""
+
+
+#define EXTERNAL_NUM_INTERRUPTS 46
+#define NUM_DIGITAL_PINS        48
+#define NUM_ANALOG_INPUTS       20
+
+#define analogInputToDigitalPin(p)  (((p)<20)?(esp32_adc2gpio[(p)]):-1)
+#define digitalPinToInterrupt(p)    (((p)<48)?(p):-1)
+#define digitalPinHasPWM(p)         (p < 46)
+
+static const uint8_t PIN_NEOPIXEL = 33;
+static const uint8_t PIN_NEOPIXEL_POWER = 21;
+static const uint8_t LED_BUILTIN = 13;
+
+static const uint8_t TX = 39;
+static const uint8_t RX = 38;
+
+static const uint8_t SDA = 3;
+static const uint8_t SCL = 4;
+
+static const uint8_t SS    = 42;
+static const uint8_t MOSI  = 35;
+static const uint8_t SCK   = 36;
+static const uint8_t MISO  = 37;
+
+static const uint8_t A0 = 18;
+static const uint8_t A1 = 17;
+static const uint8_t A2 = 16;
+static const uint8_t A3 = 15;
+static const uint8_t A4 = 14;
+static const uint8_t A5 = 8;
+
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 8;
+static const uint8_t T9 = 9;
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+static const uint8_t T13 = 13;
+static const uint8_t T14 = 14;
+
+static const uint8_t DAC1 = 17;
+static const uint8_t DAC2 = 18;
+
+#endif /* Pins_Arduino_h */

variants/adafruit_funhouse_esp32s2/partitions.csv

@@ -0,0 +1,11 @@
+# ESP-IDF Partition Table
+# Name,   Type, SubType, Offset,  Size, Flags
+# bootloader.bin,,          0x1000, 32K
+# partition table,          0x8000, 4K
+
+nvs,      data, nvs,      0x9000,  20K,
+otadata,  data, ota,      0xe000,  8K,
+ota_0,    0,    ota_0,   0x10000,  1408K,
+ota_1,    0,    ota_1,  0x170000,  1408K,
+uf2,      app,  factory,0x2d0000,  256K,
+ffat,     data, fat,    0x310000,  960K,

variants/adafruit_funhouse_esp32s2/pins_arduino.h

@@ -0,0 +1,73 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+
+#define USB_VID 0x239A
+#define USB_PID 0x80F9
+
+#define USB_MANUFACTURER "Adafruit"
+#define USB_PRODUCT "Adafruit Funhouse ESP32-S2"
+#define USB_SERIAL ""
+
+
+#define EXTERNAL_NUM_INTERRUPTS 46
+#define NUM_DIGITAL_PINS        48
+#define NUM_ANALOG_INPUTS       20
+
+#define analogInputToDigitalPin(p)  (((p)<20)?(esp32_adc2gpio[(p)]):-1)
+#define digitalPinToInterrupt(p)    (((p)<48)?(p):-1)
+#define digitalPinHasPWM(p)         (p < 46)
+
+static const uint8_t PIN_DOTSTAR_DATA = 14;
+static const uint8_t PIN_DOTSTAR_CLOCK = 15;
+static const uint8_t LED_BUILTIN = 37;
+
+static const uint8_t TX = 2;
+static const uint8_t RX = 3;
+
+static const uint8_t TFT_BACKLIGHT    = 21;
+static const uint8_t TFT_DC    = 39;
+static const uint8_t TFT_CS    = 40;
+static const uint8_t TFT_RESET = 41;
+
+static const uint8_t SPEAKER = 42;
+static const uint8_t BUTTON_DOWN = 3;
+static const uint8_t BUTTON_SELECT = 4;
+static const uint8_t BUTTON_UP = 5;
+static const uint8_t SENSOR_PIR = 16;
+static const uint8_t SENSOR_LIGHT = 18;
+
+static const uint8_t SDA = 34;
+static const uint8_t SCL = 33;
+
+static const uint8_t SS    = 40;
+static const uint8_t MOSI  = 35;
+static const uint8_t SCK   = 36;
+static const uint8_t MISO  = 37;
+
+static const uint8_t A0 = 17;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 18; // light sensor
+
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 8;
+static const uint8_t T9 = 9;
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+static const uint8_t T13 = 13;
+static const uint8_t T14 = 14;
+
+static const uint8_t DAC1 = 17;
+static const uint8_t DAC2 = 18;
+
+#endif /* Pins_Arduino_h */

variants/adafruit_magtag29_esp32s2/partitions.csv

@@ -0,0 +1,11 @@
+# ESP-IDF Partition Table
+# Name,   Type, SubType, Offset,  Size, Flags
+# bootloader.bin,,          0x1000, 32K
+# partition table,          0x8000, 4K
+
+nvs,      data, nvs,      0x9000,  20K,
+otadata,  data, ota,      0xe000,  8K,
+ota_0,    0,    ota_0,   0x10000,  1408K,
+ota_1,    0,    ota_1,  0x170000,  1408K,
+uf2,      app,  factory,0x2d0000,  256K,
+ffat,     data, fat,    0x310000,  960K,

variants/adafruit_metro_esp32s2/partitions.csv

@@ -0,0 +1,11 @@
+# ESP-IDF Partition Table
+# Name,   Type, SubType, Offset,  Size, Flags
+# bootloader.bin,,          0x1000, 32K
+# partition table,          0x8000, 4K
+
+nvs,      data, nvs,      0x9000,  20K,
+otadata,  data, ota,      0xe000,  8K,
+ota_0,    0,    ota_0,   0x10000,  1408K,
+ota_1,    0,    ota_1,  0x170000,  1408K,
+uf2,      app,  factory,0x2d0000,  256K,
+ffat,     data, fat,    0x310000,  960K,