From 77810471ce927359294f57be98d6f22e5f1ef362 Mon Sep 17 00:00:00 2001 From: me-no-dev Date: Sun, 16 Dec 2018 19:24:02 +0100 Subject: [PATCH] Move Example to proper folder --- .../examples}/FreeRTOS/FreeRTOS.ino | 194 +++++++++--------- 1 file changed, 97 insertions(+), 97 deletions(-) rename libraries/{ => ESP32/examples}/FreeRTOS/FreeRTOS.ino (96%) diff --git a/libraries/FreeRTOS/FreeRTOS.ino b/libraries/ESP32/examples/FreeRTOS/FreeRTOS.ino similarity index 96% rename from libraries/FreeRTOS/FreeRTOS.ino rename to libraries/ESP32/examples/FreeRTOS/FreeRTOS.ino index b120f292..9f9fcdca 100644 --- a/libraries/FreeRTOS/FreeRTOS.ino +++ b/libraries/ESP32/examples/FreeRTOS/FreeRTOS.ino @@ -1,97 +1,97 @@ -#if CONFIG_FREERTOS_UNICORE -#define ARDUINO_RUNNING_CORE 0 -#else -#define ARDUINO_RUNNING_CORE 1 -#endif - -#ifndef LED_BUILTIN -#define LED_BUILTIN 13 -#endif - -// define two tasks for Blink & AnalogRead -void TaskBlink( void *pvParameters ); -void TaskAnalogReadA3( void *pvParameters ); - -// the setup function runs once when you press reset or power the board -void setup() { - - // initialize serial communication at 115200 bits per second: - Serial.begin(115200); - - // Now set up two tasks to run independently. - xTaskCreatePinnedToCore( - TaskBlink - , "TaskBlink" // A name just for humans - , 1024 // This stack size can be checked & adjusted by reading the Stack Highwater - , NULL - , 2 // Priority, with 3 (configMAX_PRIORITIES - 1) being the highest, and 0 being the lowest. - , NULL - , ARDUINO_RUNNING_CORE); - - xTaskCreatePinnedToCore( - TaskAnalogReadA3 - , "AnalogReadA3" - , 1024 // Stack size - , NULL - , 1 // Priority - , NULL - , ARDUINO_RUNNING_CORE); - - // Now the task scheduler, which takes over control of scheduling individual tasks, is automatically started. -} - -void loop() -{ - // Empty. Things are done in Tasks. -} - -/*--------------------------------------------------*/ -/*---------------------- Tasks ---------------------*/ -/*--------------------------------------------------*/ - -void TaskBlink(void *pvParameters) // This is a task. -{ - (void) pvParameters; - -/* - Blink - Turns on an LED on for one second, then off for one second, repeatedly. - - If you want to know what pin the on-board LED is connected to on your ESP32 model, check - the Technical Specs of your board. -*/ - - // initialize digital LED_BUILTIN on pin 13 as an output. - pinMode(LED_BUILTIN, OUTPUT); - - for (;;) // A Task shall never return or exit. - { - digitalWrite(LED_BUILTIN, HIGH); // turn the LED on (HIGH is the voltage level) - vTaskDelay(100); // one tick delay (15ms) in between reads for stability - digitalWrite(LED_BUILTIN, LOW); // turn the LED off by making the voltage LOW - vTaskDelay(100); // one tick delay (15ms) in between reads for stability - } -} - -void TaskAnalogReadA3(void *pvParameters) // This is a task. -{ - (void) pvParameters; - -/* - AnalogReadSerial - Reads an analog input on pin A3, prints the result to the serial monitor. - Graphical representation is available using serial plotter (Tools > Serial Plotter menu) - Attach the center pin of a potentiometer to pin A3, and the outside pins to +5V and ground. - - This example code is in the public domain. -*/ - - for (;;) - { - // read the input on analog pin A3: - int sensorValueA3 = analogRead(A3); - // print out the value you read: - Serial.println(sensorValueA3); - vTaskDelay(10); // one tick delay (15ms) in between reads for stability - } -} +#if CONFIG_FREERTOS_UNICORE +#define ARDUINO_RUNNING_CORE 0 +#else +#define ARDUINO_RUNNING_CORE 1 +#endif + +#ifndef LED_BUILTIN +#define LED_BUILTIN 13 +#endif + +// define two tasks for Blink & AnalogRead +void TaskBlink( void *pvParameters ); +void TaskAnalogReadA3( void *pvParameters ); + +// the setup function runs once when you press reset or power the board +void setup() { + + // initialize serial communication at 115200 bits per second: + Serial.begin(115200); + + // Now set up two tasks to run independently. + xTaskCreatePinnedToCore( + TaskBlink + , "TaskBlink" // A name just for humans + , 1024 // This stack size can be checked & adjusted by reading the Stack Highwater + , NULL + , 2 // Priority, with 3 (configMAX_PRIORITIES - 1) being the highest, and 0 being the lowest. + , NULL + , ARDUINO_RUNNING_CORE); + + xTaskCreatePinnedToCore( + TaskAnalogReadA3 + , "AnalogReadA3" + , 1024 // Stack size + , NULL + , 1 // Priority + , NULL + , ARDUINO_RUNNING_CORE); + + // Now the task scheduler, which takes over control of scheduling individual tasks, is automatically started. +} + +void loop() +{ + // Empty. Things are done in Tasks. +} + +/*--------------------------------------------------*/ +/*---------------------- Tasks ---------------------*/ +/*--------------------------------------------------*/ + +void TaskBlink(void *pvParameters) // This is a task. +{ + (void) pvParameters; + +/* + Blink + Turns on an LED on for one second, then off for one second, repeatedly. + + If you want to know what pin the on-board LED is connected to on your ESP32 model, check + the Technical Specs of your board. +*/ + + // initialize digital LED_BUILTIN on pin 13 as an output. + pinMode(LED_BUILTIN, OUTPUT); + + for (;;) // A Task shall never return or exit. + { + digitalWrite(LED_BUILTIN, HIGH); // turn the LED on (HIGH is the voltage level) + vTaskDelay(100); // one tick delay (15ms) in between reads for stability + digitalWrite(LED_BUILTIN, LOW); // turn the LED off by making the voltage LOW + vTaskDelay(100); // one tick delay (15ms) in between reads for stability + } +} + +void TaskAnalogReadA3(void *pvParameters) // This is a task. +{ + (void) pvParameters; + +/* + AnalogReadSerial + Reads an analog input on pin A3, prints the result to the serial monitor. + Graphical representation is available using serial plotter (Tools > Serial Plotter menu) + Attach the center pin of a potentiometer to pin A3, and the outside pins to +5V and ground. + + This example code is in the public domain. +*/ + + for (;;) + { + // read the input on analog pin A3: + int sensorValueA3 = analogRead(A3); + // print out the value you read: + Serial.println(sensorValueA3); + vTaskDelay(10); // one tick delay (15ms) in between reads for stability + } +}