Reword some instructions

This commit is contained in:
me-no-dev 2017-11-28 11:09:41 +01:00
parent a907113ba2
commit 823fb8fdbb

View File

@ -1,49 +1,49 @@
## Steps to install Arduino ESP32 support on Windows
### Tested on 32 and 64 bit Windows 10 machines
1. Download and install the latest Arduino IDE ```Windows Installer``` from [arduino.cc](https://www.arduino.cc/en/Main/Software)
2. Download and install Git from [git-scm.com](https://git-scm.com/download/win)
3. Start ```Git GUI``` and run through the following steps:
- Select ```Clone Existing Repository```
![Step 1](win-screenshots/win-gui-1.png)
- Select source and destination
- Source Location: ```https://github.com/espressif/arduino-esp32.git```
- Target Directory: ```C:/Users/[YOUR_USER_NAME]/Documents/Arduino/hardware/espressif/esp32```
- Change this to your Sketchbook Location if you have a different directory listed underneath the "Sketchbook location" in Arduino preferences.
- Click ```Clone``` to start cloning the repository
![Step 2](win-screenshots/win-gui-2.png)
![Step 3](win-screenshots/win-gui-3.png)
- Open ```C:/Users/[YOUR_USER_NAME]/Documents/Arduino/hardware/espressif/esp32/tools``` and double-click ```get.exe```
![Step 4](win-screenshots/win-gui-4.png)
- When ```get.exe``` finishes, you should see the following files in the directory
![Step 5](win-screenshots/win-gui-5.png)
4. Plug your ESP32 board and wait for the drivers to install (or install manually any that might be required)
5. Start Arduino IDE
6. Select your board in ```Tools > Board``` menu
7. Select the COM port that the board is attached to
8. Compile and upload (You might need to hold the boot button while uploading)
![Arduino IDE Example](win-screenshots/arduino-ide.png)
### How to update to the latest code
1. Start ```Git GUI``` and you should see the repository under ```Open Recent Repository```. Click on it!
![Update Step 1](win-screenshots/win-gui-update-1.png)
2. From menu ```Remote``` select ```Fetch from``` > ```origin```
![Update Step 2](win-screenshots/win-gui-update-2.png)
3. Wait for git to pull any changes and close ```Git GUI```
4. Open ```C:/Users/[YOUR_USER_NAME]/Documents/Arduino/hardware/espressif/esp32/tools``` and double-click ```get.exe```
![Step 4](win-screenshots/win-gui-4.png)
## Steps to install Arduino ESP32 support on Windows
### Tested on 32 and 64 bit Windows 10 machines
1. Download and install the latest Arduino IDE ```Windows Installer``` from [arduino.cc](https://www.arduino.cc/en/Main/Software)
2. Download and install Git from [git-scm.com](https://git-scm.com/download/win)
3. Start ```Git GUI``` and run through the following steps:
- Select ```Clone Existing Repository```
![Step 1](win-screenshots/win-gui-1.png)
- Select source and destination
- Sketchbook Directory: Usually ```C:/Users/[YOUR_USER_NAME]/Documents/Arduino``` and is listed underneath the "Sketchbook location" in Arduino preferences.
- Source Location: ```https://github.com/espressif/arduino-esp32.git```
- Target Directory: ```[ARDUINO_SKETCBOOK_DIR]/hardware/espressif/esp32```
- Click ```Clone``` to start cloning the repository
![Step 2](win-screenshots/win-gui-2.png)
![Step 3](win-screenshots/win-gui-3.png)
- Open ```[ARDUINO_SKETCBOOK_DIR]/hardware/espressif/esp32/tools``` and double-click ```get.exe```
![Step 4](win-screenshots/win-gui-4.png)
- When ```get.exe``` finishes, you should see the following files in the directory
![Step 5](win-screenshots/win-gui-5.png)
4. Plug your ESP32 board and wait for the drivers to install (or install manually any that might be required)
5. Start Arduino IDE
6. Select your board in ```Tools > Board``` menu
7. Select the COM port that the board is attached to
8. Compile and upload (You might need to hold the boot button while uploading)
![Arduino IDE Example](win-screenshots/arduino-ide.png)
### How to update to the latest code
1. Start ```Git GUI``` and you should see the repository under ```Open Recent Repository```. Click on it!
![Update Step 1](win-screenshots/win-gui-update-1.png)
2. From menu ```Remote``` select ```Fetch from``` > ```origin```
![Update Step 2](win-screenshots/win-gui-update-2.png)
3. Wait for git to pull any changes and close ```Git GUI```
4. Open ```[ARDUINO_SKETCBOOK_DIR]/hardware/espressif/esp32/tools``` and double-click ```get.exe```
![Step 4](win-screenshots/win-gui-4.png)