An example to read high frequency analog data using i2s_adc (#2295)
This commit is contained in:
parent
70656aa129
commit
a539257a38
71
libraries/ESP32/examples/I2S/HiFreq_ADC/HiFreq_ADC.ino
Normal file
71
libraries/ESP32/examples/I2S/HiFreq_ADC/HiFreq_ADC.ino
Normal file
@ -0,0 +1,71 @@
|
||||
/*
|
||||
* This is an example to read analog data at high frequency using the I2S peripheral
|
||||
* Run a wire between pins 27 & 32
|
||||
* The readings from the device will be 12bit (0-4096)
|
||||
*/
|
||||
#include <driver/i2s.h>
|
||||
|
||||
#define I2S_SAMPLE_RATE 78125
|
||||
#define ADC_INPUT ADC1_CHANNEL_4 //pin 32
|
||||
#define OUTPUT_PIN 27
|
||||
#define OUTPUT_VALUE 3800
|
||||
#define READ_DELAY 10000 //microseconds
|
||||
|
||||
void i2sInit()
|
||||
{
|
||||
i2s_config_t i2s_config = {
|
||||
.mode = (i2s_mode_t)(I2S_MODE_MASTER | I2S_MODE_RX | I2S_MODE_ADC_BUILT_IN),
|
||||
.sample_rate = I2S_SAMPLE_RATE, // The format of the signal using ADC_BUILT_IN
|
||||
.bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT, // is fixed at 12bit, stereo, MSB
|
||||
.channel_format = I2S_CHANNEL_FMT_RIGHT_LEFT,
|
||||
.communication_format = I2S_COMM_FORMAT_I2S_MSB,
|
||||
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1,
|
||||
.dma_buf_count = 4,
|
||||
.dma_buf_len = 8,
|
||||
.use_apll = false,
|
||||
.tx_desc_auto_clear = false,
|
||||
.fixed_mclk = 0
|
||||
};
|
||||
i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL);
|
||||
i2s_set_adc_mode(ADC_UNIT_1, ADC_INPUT);
|
||||
i2s_adc_enable(I2S_NUM_0);
|
||||
}
|
||||
|
||||
void reader(void *pvParameters) {
|
||||
uint32_t read_counter = 0;
|
||||
uint64_t read_sum = 0;
|
||||
while(1){
|
||||
size_t bytes_read = 0;
|
||||
uint16_t buffer = 0;
|
||||
i2s_read(I2S_NUM_0, &buffer, sizeof(buffer), &bytes_read, portMAX_DELAY);
|
||||
buffer = ~buffer; // The data is inverted
|
||||
//Serial.println(buffer % 0x1000);
|
||||
read_sum += buffer % 0x1000; // The 4 high bits are the channel
|
||||
read_counter++;
|
||||
if (bytes_read != sizeof(buffer)) Serial.println("buffer empty!");
|
||||
if (read_counter == I2S_SAMPLE_RATE) {
|
||||
Serial.printf("avg: %d\n", read_sum/I2S_SAMPLE_RATE);
|
||||
read_counter = 0;
|
||||
read_sum = 0;
|
||||
i2s_adc_disable(I2S_NUM_0);
|
||||
delay(READ_DELAY);
|
||||
i2s_adc_enable(I2S_NUM_0);
|
||||
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void setup() {
|
||||
Serial.begin(115200);
|
||||
// Put a signal out on pin
|
||||
uint32_t freq = ledcSetup(0, I2S_SAMPLE_RATE, 10);
|
||||
Serial.printf("Output frequency: %d\n", freq);
|
||||
ledcWrite(0, OUTPUT_VALUE/4);
|
||||
ledcAttachPin(OUTPUT_PIN, 0);
|
||||
// Initialize the I2S peripheral
|
||||
i2sInit();
|
||||
// Create a task that will read the data
|
||||
xTaskCreatePinnedToCore(reader, "ADC_reader", 2048, NULL, 1, NULL, 1);
|
||||
}
|
||||
|
||||
void loop() {}
|
Loading…
Reference in New Issue
Block a user