diff --git a/libraries/WiFi/examples/WiFiClientEnterprise/README.md b/libraries/WiFi/examples/WiFiClientEnterprise/README.md
index 9c42adfa..4c094114 100644
--- a/libraries/WiFi/examples/WiFiClientEnterprise/README.md
+++ b/libraries/WiFi/examples/WiFiClientEnterprise/README.md
@@ -1,29 +1,42 @@
 # ESP32-Eduroam
 * Eduroam wifi connection with university login identity
-* Working under Eduroam networks under FreeRadius service for 802.1x
-* Eduroam is using methods: PEAP + MsCHAPv2
+* Working under Eduroam networks worldwide
+* Methods: PEAP + MsCHAPv2
 
 # Format
-* IDENTITY = nickname@university.domain
-* PASSWORD = your password
+* IDENTITY = youridentity   --> if connecting from different university, use youridentity@youruniversity.domain format
+* PASSWORD = yourpassword
 
 # Usage
 * Change IDENTITY
 * Change password
 * Upload sketch and enjoy!
 * After sucessful assign of IP address, board will connect to HTTP page on internet to verify your authentification
+* Board will auto reconnect to Eduroam if it lost connection
 
 # Tested locations
-* Technical University in Košice (Slovakia) - Working
-* Slovak Technical University in Bratislava (Slovakia) - Working
-* University of Antwerp (Belgium) - Working
-* UPV Universitat Politècnica de València (Spain) - Working
-* Local RADIUS network under Linux Zeroshell - Unsuccessful connection
+|University|Board|Method|Result|
+|-------------|-------------| -----|------|
+|Technical University in Košice (Slovakia)|ESP32 Devkit v1|PEAP + MsCHAPv2|Working|
+|Technical University in Košice (Slovakia)|ESP32 DevKitc v4|PEAP + MsCHAPv2|Working|
+|Slovak Technical University in Bratislava (Slovakia)|ESP32 Devkit v1|PEAP + MsCHAPv2|Working|
+|University of Antwerp (Belgium)|Lolin32|PEAP + MsCHAPv2|Working|
+|UPV Universitat Politècnica de València (Spain)|ESP32 Devmodule v4|PEAP + MsCHAPv2|Working|
+|Local Zeroshell powered network|ESP32 Devkit v1|PEAP + MsCHAPv2|*Not working*|
+|Hasselt University (Belgium)|xxx|PEAP + MsCHAPv2|Working with fix sketch|
+|Universidad de Granada (Spain)|Lolin D32 Pro|PEAP + MsCHAPv2|Working|
+|Universidad de Granada (Spain)|Lolin D32|PEAP + MsCHAPv2|Working|
+|Universidade Federal de Santa Catarina (Brazil)|xxx|EAP-TTLS + MsCHAPv2|Working|
+|University of Regensburg (Germany)|Lolin32|PEAP + MsCHAPv2|Working|
 
+# Common errors - Switch to Debug mode for Serial monitor prints
+|Error|Appearance|Solution|
+|-------------|-------------|-------------|
+|wifi: Set status to INIT|Frequent|Hold EN button for few seconds|
+|HANDSHAKE_TIMEOUT|Rare|Bug was found under Zeroshell RADIUS authentization - Unsucessful connection|
+|AUTH_EXPIRE|Common|In the case of weak wifi network signal, this error is quite common, bring your device closer to AP|
+|ASSOC_EXPIRE|Rare|-|
 # Sucessful connection example
  ![alt text](https://i.nahraj.to/f/24Kc.png)
 # Unsucessful connection example
  ![alt text](https://camo.githubusercontent.com/87e47d1b27f4e8ace87423e40e8edbce7983bafa/68747470733a2f2f692e6e616872616a2e746f2f662f323435572e504e47)
-
-# Boards
-* Tested Under ESP32 Devkit v1