fix i2c hal
This commit is contained in:
me-no-dev
parent
917286acf2
commit
cc3c55bbb1
@ -63,10 +63,10 @@ enum {
|
||||
/*
|
||||
* index - command index (0 to 15)
|
||||
* op_code - is the command
|
||||
* byte_num - This register is to store the amounts of data that is read and written. byte_num in RSTART, STOP, END is null.
|
||||
* ack_val - Each data byte is terminated by an ACK bit used to set the bit level.
|
||||
* ack_exp - This bit is to set an expected ACK value for the transmitter.
|
||||
* ack_check - This bit is to decide whether the transmitter checks ACK bit. 1 means yes and 0 means no.
|
||||
* byte_num - This register is to store the amounts of data that is read and written. byte_num in RSTART, STOP, END is null.
|
||||
* */
|
||||
void i2cSetCmd(i2c_t * i2c, uint8_t index, uint8_t op_code, uint8_t byte_num, bool ack_val, bool ack_exp, bool ack_check)
|
||||
{
|
||||
@ -80,6 +80,7 @@ void i2cSetCmd(i2c_t * i2c, uint8_t index, uint8_t op_code, uint8_t byte_num, bo
|
||||
|
||||
int i2cWrite(i2c_t * i2c, uint16_t address, bool addr_10bit, uint8_t * data, uint8_t len, bool sendStop)
|
||||
{
|
||||
int i;
|
||||
uint8_t index = 0;
|
||||
uint8_t dataLen = len + (addr_10bit?2:1);
|
||||
address = (address << 1);
|
||||
@ -87,8 +88,11 @@ int i2cWrite(i2c_t * i2c, uint16_t address, bool addr_10bit, uint8_t * data, uin
|
||||
while(dataLen) {
|
||||
uint8_t willSend = (dataLen > 32)?32:dataLen;
|
||||
uint8_t dataSend = willSend;
|
||||
i2cSetCmd(i2c, 0, I2C_CMD_RSTART, 0, false, false, false);//START
|
||||
i2cSetCmd(i2c, 1, I2C_CMD_WRITE, willSend, false, false, true);
|
||||
|
||||
//CMD START
|
||||
i2cSetCmd(i2c, 0, I2C_CMD_RSTART, 0, false, false, false);
|
||||
|
||||
//CMD WRITE(ADDRESS + DATA)
|
||||
if(!index) {
|
||||
i2c->dev->fifo_data.data = address & 0xFF;
|
||||
dataSend--;
|
||||
@ -97,27 +101,56 @@ int i2cWrite(i2c_t * i2c, uint16_t address, bool addr_10bit, uint8_t * data, uin
|
||||
dataSend--;
|
||||
}
|
||||
}
|
||||
int i = 0;
|
||||
i = 0;
|
||||
while(i<dataSend) {
|
||||
i++;
|
||||
i2c->dev->fifo_data.data = data[index++];
|
||||
}
|
||||
i2cSetCmd(i2c, 1, I2C_CMD_WRITE, willSend, false, false, true);
|
||||
dataLen -= willSend;
|
||||
|
||||
//CMD STOP or CMD END if there is more data
|
||||
if(dataLen) {
|
||||
i2cSetCmd(i2c, 2, I2C_CMD_END, 0, false, false, false);
|
||||
} else if(sendStop) {
|
||||
i2cSetCmd(i2c, 2, I2C_CMD_STOP, 0, false, false, true);
|
||||
i2cSetCmd(i2c, 2, I2C_CMD_STOP, 0, false, false, false);
|
||||
}
|
||||
|
||||
//Clear Interrupts
|
||||
i2c->dev->int_clr.val = 0xFFFFFFFF;
|
||||
|
||||
//START Transmission
|
||||
i2c->dev->ctr.trans_start = 1;
|
||||
while(i2c->dev->ctr.trans_start || i2c->dev->status_reg.bus_busy || (!i2c->dev->int_raw.ack_err && !i2c->dev->command[2].done));
|
||||
if(!i2c->dev->command[2].done) {
|
||||
log_e("Ack Error");
|
||||
return -1;
|
||||
|
||||
//WAIT Transmission
|
||||
while(1) {
|
||||
if(i2c->dev->ctr.trans_start || i2c->dev->status_reg.bus_busy || !(i2c->dev->int_raw.trans_complete) || !(i2c->dev->command[2].done)) {
|
||||
continue;
|
||||
} else if(i2c->dev->int_raw.ack_err || i2c->dev->int_raw.time_out || i2c->dev->int_raw.arbitration_lost) {
|
||||
break;
|
||||
} else if(i2c->dev->command[2].done) {
|
||||
break;
|
||||
}
|
||||
if(i2c->dev->status_reg.arb_lost || i2c->dev->status_reg.time_out) {
|
||||
log_e("Bus Fail");
|
||||
return -1;
|
||||
}
|
||||
|
||||
//Bus failed (maybe check for this while waiting?
|
||||
if(i2c->dev->int_raw.arbitration_lost) {
|
||||
//log_e("Bus Fail! Addr: %x", address >> 1);
|
||||
return 4;
|
||||
}
|
||||
|
||||
//Bus timeout
|
||||
if(i2c->dev->int_raw.time_out) {
|
||||
//log_e("Bus Timeout! Addr: %x", address >> 1);
|
||||
return 3;
|
||||
}
|
||||
|
||||
//Transmission did not finish and ACK_ERR is set
|
||||
if(i2c->dev->int_raw.ack_err) {
|
||||
//log_e("Ack Error! Addr: %x", address >> 1);
|
||||
return 1;
|
||||
}
|
||||
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
@ -130,12 +163,16 @@ int i2cRead(i2c_t * i2c, uint16_t address, bool addr_10bit, uint8_t * data, uint
|
||||
uint8_t cmdIdx;
|
||||
uint8_t willRead;
|
||||
|
||||
i2cSetCmd(i2c, 0, I2C_CMD_RSTART, 0, false, false, false);//START
|
||||
i2cSetCmd(i2c, 1, I2C_CMD_WRITE, addrLen, false, false, true);
|
||||
//CMD START
|
||||
i2cSetCmd(i2c, 0, I2C_CMD_RSTART, 0, false, false, false);
|
||||
|
||||
//CMD WRITE ADDRESS
|
||||
i2c->dev->fifo_data.data = address & 0xFF;
|
||||
if(addr_10bit) {
|
||||
i2c->dev->fifo_data.data = (address >> 8) & 0xFF;
|
||||
}
|
||||
i2cSetCmd(i2c, 1, I2C_CMD_WRITE, addrLen, false, false, true);
|
||||
|
||||
while(len) {
|
||||
cmdIdx = (index)?0:2;
|
||||
willRead = (len > 32)?32:(len-1);
|
||||
@ -150,14 +187,38 @@ int i2cRead(i2c_t * i2c, uint16_t address, bool addr_10bit, uint8_t * data, uint
|
||||
}
|
||||
}
|
||||
|
||||
//Clear Interrupts
|
||||
i2c->dev->int_clr.val = 0xFFFFFFFF;
|
||||
|
||||
//START Transmission
|
||||
i2c->dev->ctr.trans_start = 1;
|
||||
while(i2c->dev->ctr.trans_start || i2c->dev->status_reg.bus_busy || (!i2c->dev->int_raw.ack_err && !i2c->dev->command[cmdIdx-1].done));
|
||||
if(!i2c->dev->command[cmdIdx-1].done) {
|
||||
log_e("Ack Error");
|
||||
return -1;
|
||||
|
||||
//WAIT Transmission
|
||||
while(1) {
|
||||
if(i2c->dev->ctr.trans_start || i2c->dev->status_reg.bus_busy || !(i2c->dev->int_raw.trans_complete) || !(i2c->dev->command[cmdIdx-1].done)) {
|
||||
continue;
|
||||
} else if(i2c->dev->int_raw.ack_err || i2c->dev->int_raw.time_out || i2c->dev->int_raw.arbitration_lost) {
|
||||
break;
|
||||
} else if(i2c->dev->command[cmdIdx-1].done) {
|
||||
break;
|
||||
}
|
||||
if(i2c->dev->status_reg.arb_lost || i2c->dev->status_reg.time_out) {
|
||||
log_e("Bus Fail");
|
||||
}
|
||||
|
||||
//Bus failed (maybe check for this while waiting?
|
||||
if(i2c->dev->int_raw.arbitration_lost) {
|
||||
//log_e("Bus Fail! Addr: %x", address >> 1);
|
||||
return -4;
|
||||
}
|
||||
|
||||
//Bus timeout
|
||||
if(i2c->dev->int_raw.time_out) {
|
||||
//log_e("Bus Timeout! Addr: %x", address >> 1);
|
||||
return -3;
|
||||
}
|
||||
|
||||
//Transmission did not finish and ACK_ERR is set
|
||||
if(i2c->dev->int_raw.ack_err) {
|
||||
//log_e("Ack Error! Addr: %x", address >> 1);
|
||||
return -1;
|
||||
}
|
||||
int i = 0;
|
||||
@ -192,8 +253,8 @@ void i2cSetFrequency(i2c_t * i2c, uint32_t clk_speed)
|
||||
i2c->dev->scl_stop_hold.time = 50;
|
||||
i2c->dev->scl_stop_setup.time = 50;
|
||||
|
||||
i2c->dev->sda_hold.time = 40;
|
||||
i2c->dev->sda_sample.time = 40;
|
||||
i2c->dev->sda_hold.time = 25;
|
||||
i2c->dev->sda_sample.time = 25;
|
||||
}
|
||||
|
||||
uint32_t i2cGetFrequency(i2c_t * i2c)
|
||||
@ -205,7 +266,6 @@ uint32_t i2cGetFrequency(i2c_t * i2c)
|
||||
* mode - 0 = Slave, 1 = Master
|
||||
* slave_addr - I2C Address
|
||||
* addr_10bit_en - enable slave 10bit address mode.
|
||||
* clk_speed - SCL Frequency
|
||||
* */
|
||||
|
||||
i2c_t * i2cInit(uint8_t i2c_num, uint16_t slave_addr, bool addr_10bit_en)
|
||||
@ -226,16 +286,16 @@ i2c_t * i2cInit(uint8_t i2c_num, uint16_t slave_addr, bool addr_10bit_en)
|
||||
CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG,DPORT_I2C_EXT1_RST);
|
||||
}
|
||||
|
||||
i2c->dev->ctr.rx_lsb_first = 0 ;
|
||||
i2c->dev->ctr.tx_lsb_first = 0 ;
|
||||
i2c->dev->ctr.val = 0;
|
||||
i2c->dev->ctr.ms_mode = (slave_addr == 0);
|
||||
i2c->dev->ctr.sda_force_out = 1 ;
|
||||
i2c->dev->ctr.scl_force_out = 1 ;
|
||||
i2c->dev->ctr.sample_scl_level = 0 ;
|
||||
i2c->dev->ctr.clk_en = 1;
|
||||
|
||||
i2c->dev->timeout.tout = 2000;
|
||||
i2c->dev->fifo_conf.nonfifo_en = 0;
|
||||
|
||||
i2c->dev->slave_addr.val = 0;
|
||||
if (slave_addr) {
|
||||
i2c->dev->slave_addr.addr = slave_addr;
|
||||
i2c->dev->slave_addr.en_10bit = addr_10bit_en;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user