- Remove client from the list of devices in case registration fails
- Filter other events not related to registration during registration phase
- Cleanup if connect fails
- Reset if after disconnect
- Disconnect callback *after* cleanup is done so object can be deleted
This fixes some of the issues I had like:
- `BLEClient::connect` hangs up and never recovered because registration failed
- `BLEClient` could not be deleted after disconnect or deletion creating ghost events https://github.com/espressif/arduino-esp32/issues/4047
- `BLEClient` could not be properly reused after a connection was attempted (successful or not)
* Cleanup in case of registration and connect failure.
Cleanup before calling disconnect callback for safe delete.
Reject other events during registration.
Adresses #4047, #4055
* Clear if after unregister #4047
fixes#4596
* Prevent possible undefined behaviour by get methods not taking an index as parameter
* Add methods to get the count of service data UUIDs and service UUIDs
* Various code improvements
Compiler complains on unused parameter pCharacteristicMap:
framework-arduinoespressif32\libraries\BLE\src\BLERemoteService.cpp: In member function 'void BLERemoteService::getCharacteristics(std::map<short unsigned int, BLERemoteCharacteristic*>*)':
\framework-arduinoespressif32\libraries\BLE\src\BLERemoteService.cpp:246:89: warning: parameter 'pCharacteristicMap' set but not used [-Wunused-but-set-parameter]
void BLERemoteService::getCharacteristics(std::map<uint16_t, BLERemoteCharacteristic*>* pCharacteristicMap) {
* improve & fix BLEScan when too many BLE devices
- when wantDuplicates, no need to check duplicate and no more insert into vector
- delete advertisedDevice when not insert into vector, fix memory leak
- add showParse when you just want raw advertised data
Remove device from Peer list if connection fails.
Only call onConnect callback if connection was successful.
Only call onDisconnect callback if the connection was previously connected (ESP_GATTC_DISCONNECT_EVT is fired on a unsuccessful connection attempt also).
Resolves a number of issues with phantom events and callbacks being fired.
::addPeerDevice and ::removePeerDevice are called with m_appId, so should ::updatePeerDevice as all use the same parameter for the underlying map's key.
* Fix for issue #4158: Crash with stack trace originating in Bluedroid
Improved configuration of scan response data in 'BLEAdvertising' avoids the crash:
- Added member variable 'm_scanRespData' to configure scan response differently from advertising data
- Initialization of 'm_scanRespData' in BLEAdvertising constructor
- Use of 'm_scanRespData' within BLEAdvertising::start() to configure the scan response
- 'Flags' and 'Appearance' are cleared in the scan response data
- With this fix, device names of up to 29 characters can be used without causing a crash.
* BLERemoteChar: fix descriptor 2902 write for characteristic notifications
When registering a notification on a characteristic, the 2902 descriptor
(CCCD) value is set to 1 (or 2 for indication).
According to the BLUETOOTH CORE SPECIFICATION Version 5.2, Revision Date
2019-12-31, section 4.12.3 "Write Characteristic Descriptors" (page 1588),
the characteristic descriptor write must expect a response.
Currently, the descriptor write is performed without expecting a reponse,
which prevents the notification to be functional with some BLE stacks.
This commit modify the write to expect the response.
Signed-off-by: Jimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com>
* BLERemoteChar: forward GATT client event to characteristic descriptors
This commits prevents a permanent wait when calling BLERemoteDescriptor
readValue function, on the m_semaphoreReadDescrEvt semaphore.
ESP32 BLE stack calls to remote characteristic
- notification,
- value read
- value write
and remote characteristic descriptor
- value read
are asynchronous.
When such a call is performed by this library, a semaphore is taken prior
to the BLE stack read or write operation, and waited on after it.
Releasing the semaphore is done by the characteristic event handling
function (gattClientEventHandler), when the appropriate event is received.
However, the characteristic descriptor events are discarded, and the
value read semaphore is never released.
This commits forwards the GATT client events from the remote
characteristic down to their remote characteristic descriptor, and
implements their event handling.
Adding a semaphore for the remote characteristic descriptor value write
will be done in a separate commit.
Signed-off-by: Jimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com>
* BLERemoteDescriptor: add semaphore to characteristic descriptor write
This adds a semaphore to characteristic descriptor value write, to mimic
the value read function, and to ensure completion of the operation before
we carry on.
Signed-off-by: Jimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com>
Co-authored-by: Jimmy Durand Wesolowski <jimmy.durand.wesolowski@commsolid.com>
This is a fix for missing scan responses after a first successfull scan.
While running the BLE_scan.ino sketch with wantDuplicates=false, i got
only one result with correct advertising and scan response length (31,26):
pBLEScan->setAdvertisedDeviceCallbacks(new MyAdvertisedDeviceCallbacks(), false);
pBLEScan->start(scanTime, false);
...
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 31 + 26, addr type: 1
All following calls to start() just returned the advertising data without
scan response data:
pBLEScan->start(scanTime, false);
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 31 + 0, addr type: 1
With "wantDuplicates=true" i got:
pBLEScan->setAdvertisedDeviceCallbacks(new MyAdvertisedDeviceCallbacks(), true);
pBLEScan->start(scanTime, false);
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 31 + 26, addr type: 1
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 31 + 26, addr type: 1
[W][BLEScan.cpp:73] handleGAPEvent(): ESP_GAP_SEARCH_INQ_CMPL_EVT
Devices found: 1
Scan done!
pBLEScan->start(scanTime, false);
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 31 + 0, addr type: 1
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 0 + 26, addr type: 1
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 31 + 0, addr type: 1
[W][BLEScan.cpp:109] handleGAPEvent(): bytes length: 0 + 26, addr type: 1
Explicitly initializing m_scan_params.scan_duplicate of BLEScan solves
this issue (In my case the un-initialized value was
m_scan_params.scan_duplicate == 1073599044).
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Informed by the discussion in the bug and the code in 'that other branch'
the fix was clear. Just set a flag if we start handling a write, and
use that flag to guard the long write complete call.
By default the disconnect is broadcasted to every clients. So if you call disconnect on one connected client, they'll all be disconnected if we don't filter the event by conn_id.
* Fix issue #3833, data parsing of Eddystone TLM data frame
Add Beacon scanner example to show usage of BLEEddystoneTLM class and BLEEddystoneURL class
Add EddystoneTLM beacon example
Add EddystoneURL beacon example
* Fix buffer size for .toString()
* Updated BLERemoteCharacteristic to exposre esp_gatt_auth_req_t parameter for readValue and writeValue.
* Updated BLERemoteCharacteristic/Descriptor to expose a setAuth method to allow tweaking the authentication request type for that remotecharacteristic/descriptor without the need to add auth on each read/write.
* Add Added unimplemented getCharacteristicsByHandle function
Defined in BLERemoteService.h
But, Not included in BLERemoteService.cpp
* Delete log output
Pretty sure this was a typo as the deinit doesn't actually allow for reinit if that is an ifndef. Changed in my local copy and can now deinit and reinit just fine. Also, not sure why we are checking for the architecture here. Just curious.
