Commit Graph

9 Commits

Author SHA1 Message Date
me-no-dev
4b3f5c8ed4 Update licenses 2021-02-18 12:14:35 +02:00
chuck todd
b05430cfd9 Wire ReSTART fix, with others (#1717)
* ReSTART fix, Sequencing fix

pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill.  during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence.  The problem manifested as an ACK error. 
In addition to this required bug fix I propose:
* `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported.  Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure.
* `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus.  With the functional change to `Wire.begin()` this allows app level recover of a hung bus.
* `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()`  had no room to record the directed address bytes.  It generated just a NAK check without setting the EEPROMs internal register address.  The succeeding ReSTART read succeeded at incorrect address.
* Changes to the HAL layer:
** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently
** added `i2cDebug()` programmatic control of debug buffer output
** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers.
** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points 
 
*

* Update esp32-hal-i2c.c

* Update Wire.cpp

* ReSTART, Sequencing

pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill.  during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence.  The problem manifested as an ACK error. 
In addition to this required bug fix I propose:
* `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported.  Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure.
* `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus.  With the functional change to `Wire.begin()` this allows app level recover of a hung bus.
* `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()`  had no room to record the directed address bytes.  It generated just a NAK check without setting the EEPROMs internal register address.  The succeeding ReSTART read succeeded at incorrect address.
* Changes to the HAL layer:
** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently
** added `i2cDebug()` programmatic control of debug buffer output
** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers.
** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points 
 
*

* Forgot DebugFlags Return

@andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
Me No Dev
a59eafbc9d
Update IDF to aaf1239 (#1539)
* fix sdmmc config

* Fix warnings in EEPROM

from @Curclamas

* remove leftover TAG in EEPROM

* Initial add of @stickbreaker i2c

* Add log_n

* fix warnings when log is off

* i2c code clean up and reorganization

* add flags to interrupt allocator

* fix sdmmc config

* Fix warnings in EEPROM

from @Curclamas

* remove leftover TAG in EEPROM

* fix errors with latest IDF

* fix debug optimization (#1365)

incorrect optimization for debugging tick markers.

* Fix some missing BT header

* Change BTSerial log calls

* Update BLE lib

* Arduino-ESP32 release management scripted (#1515)

* Calculate an absolute path for a custom partitions table (#1452)

* * Arduino-ESP32 release management scripted
(ready-to-merge)

* * secure env for espressif/arduino-esp32

* * build tests enabled
* gitter webhook enabled

* * gitter room link fixed
* better comment

* * filepaths fixed

* BT Serial adjustments

* * don't run sketch builds & tests for tagged builds

* Return false from WiFi.hostByName() if hostname is not resolved

* Free BT Memory when BT is not used

* WIFI_MODE_NULL is not supported anymore

* Select some key examples to build with PlatformIO to save some time

* Update BLE lib

* Fixed BLE lib

* Major WiFi overhaul

- auto reconnect on connection loss now works
- moved to event groups
- some code clean up and procedure optimizations
- new methods to get a more elaborate system ststus

* Add cmake tests to travis

* Add initial AsyncUDP

* Add NetBIOS lib and fix CMake includes

* Add Initial WebServer

* Fix WebServer and examples

* travis not quiting on build fail

* Try different travis build

* Update IDF to aaf1239

* Fix WPS Example

* fix script permission and add some fail tests to sketch builder

* Add missing space in WiFiClient::write(Stream &stream)
2018-06-27 09:01:06 +02:00
Jason K
1270f40066 Add initial handling for long I2C reads. 2017-10-21 08:26:46 -04:00
Jason K
0cd62852da I2c reset functionality (#678)
* Addition of a i2cReset method and timeout handling for the case where the i2c hardware FSM (state machine) gets stuck in a busy state.

* Use newly added i2cReset function within the wire library.
2017-09-29 21:17:13 +08:00
me-no-dev
c19fc061b0 Hopefully fix I2C/Wire
Tested with (all at the same time):
- MPU9250
- HTU21
- TMP102
- BMP180
- AM2320
- SSD1306
2016-12-14 02:41:22 +02:00
me-no-dev
f9f895797a return proper errors 2016-10-11 15:11:51 +03:00
me-no-dev
9ec4389889 implement thread-safe i2c 2016-10-11 14:20:02 +03:00
me-no-dev
5f3a205955 initial import 2016-10-06 07:09:44 -06:00