* ReSTART fix, Sequencing fix
pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error.
In addition to this required bug fix I propose:
* `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure.
* `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus.
* `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address.
* Changes to the HAL layer:
** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently
** added `i2cDebug()` programmatic control of debug buffer output
** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers.
** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points
*
* Update esp32-hal-i2c.c
* Update Wire.cpp
* ReSTART, Sequencing
pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill. during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence. The problem manifested as an ACK error.
In addition to this required bug fix I propose:
* `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported. Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure.
* `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus. With the functional change to `Wire.begin()` this allows app level recover of a hung bus.
* `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()` had no room to record the directed address bytes. It generated just a NAK check without setting the EEPROMs internal register address. The succeeding ReSTART read succeeded at incorrect address.
* Changes to the HAL layer:
** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently
** added `i2cDebug()` programmatic control of debug buffer output
** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers.
** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points
*
* Forgot DebugFlags Return
@andriyadi found this, total brain fade on my part.
If you receive a package with a data length of zero, parsePacket returns 0, but rx_buffer will exist. So if another parsePacket with no read access returns to zeros, there is still data that can be read. This example would not work: https://www.arduino.cc/en/Reference/EthernetUDPParsePacket
Also I added a check if rx_buffer exit when you try to flush it.
EEPROM.h uses data types which are declared through Arduino.h but that file does not contain an #include directive for Arduino.h. This does not cause any problems when the EEPROM library is #included from a .ino file because the Arduino IDE automatically adds an #include directive for Arduino.h but this is not the case for .cpp files. If a .cpp file has an #include directive for EEPROM.h that does not follow an #include directive for Arduino.h then compilation fails:
E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:91:5: error: 'float_t' does not name a type
float_t readFloat(int address);
^
E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:92:5: error: 'double_t' does not name a type
double_t readDouble(int address);
^
E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:95:5: error: 'String' does not name a type
String readString(int address);
^
E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:110:36: error: 'float_t' has not been declared
size_t writeFloat(int address, float_t value);
^
E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:111:37: error: 'double_t' has not been declared
size_t writeDouble(int address, double_t value);
^
E:\arduino\hardware\espressif\esp32\libraries\EEPROM/EEPROM.h:114:37: error: 'String' has not been declared
size_t writeString(int address, String value);
* Allow using argument with attachInterrupt
* formatting
replace tabs with spaces
* fix bug more then 1 interrupt
* leftover
* add example
* make attachInterruptArg public
* update example
* leftover
* fix sdmmc config
* Fix warnings in EEPROM
from @Curclamas
* remove leftover TAG in EEPROM
* Initial add of @stickbreaker i2c
* Add log_n
* fix warnings when log is off
* i2c code clean up and reorganization
* add flags to interrupt allocator
* fix sdmmc config
* Fix warnings in EEPROM
from @Curclamas
* remove leftover TAG in EEPROM
* fix errors with latest IDF
* fix debug optimization (#1365)
incorrect optimization for debugging tick markers.
* Fix some missing BT header
* Change BTSerial log calls
* Update BLE lib
* Arduino-ESP32 release management scripted (#1515)
* Calculate an absolute path for a custom partitions table (#1452)
* * Arduino-ESP32 release management scripted
(ready-to-merge)
* * secure env for espressif/arduino-esp32
* * build tests enabled
* gitter webhook enabled
* * gitter room link fixed
* better comment
* * filepaths fixed
* BT Serial adjustments
* * don't run sketch builds & tests for tagged builds
* Return false from WiFi.hostByName() if hostname is not resolved
* Free BT Memory when BT is not used
* WIFI_MODE_NULL is not supported anymore
* Select some key examples to build with PlatformIO to save some time
* Update BLE lib
* Fixed BLE lib
* Major WiFi overhaul
- auto reconnect on connection loss now works
- moved to event groups
- some code clean up and procedure optimizations
- new methods to get a more elaborate system ststus
* Add cmake tests to travis
* Add initial AsyncUDP
* Add NetBIOS lib and fix CMake includes
* Add Initial WebServer
* Fix WebServer and examples
* travis not quiting on build fail
* Try different travis build
* Update IDF to aaf1239
* Fix WPS Example
* fix script permission and add some fail tests to sketch builder
* Add missing space in WiFiClient::write(Stream &stream)
* Add `SYSTEM_EVENT_WIFI_READY` call back once wifi service is init. allows you to hook in, as the sdk does not generate this event for you.
As it stands the SDK does not appear to set `WIFI_MODE_NULL` correctly. if the wifi is initialised and set to `WIFI_MODE_NULL` it actually defaults to AP mode. This fix keeps `WIFI_MODE_NULL` within the ESP class if the wifi has not been init yet, and works in my testing. albeit a one sided conversation.
https://github.com/espressif/arduino-esp32/issues/1306
* make changes compatible with new _persistent behaviour.
wifi_err_reason_t doesn't have reason code 12. After reason code 11, we are getting wrong wifi disconnected reason message. Added "UNSPECIFIED" in place of reason code 12.
And above 201 reason code, it should be r-176 instead of r-177. Because messages are started from zeroth offset.
