* Add default pin mapping for Serial1 and Serial2
* Default pin remap on wESP32
Improved default pin mapping for I2C0 and UART1 to avoid issues
with programming.
SDA0 was on IO2 but IO2 needs to be pulled low on reset to enable
serial programming, which conflicts with I2C pull-ups.
RX1 was on IO12, idle UART level is high which conflicts with
IO12 needing to be low on reset to select correct 3.3V flash
voltage.
New mappings:
SDA0 on IO15
RX1 on IO13
TX1 on IO12
In Board.txt file added board revision submenu to distinguish the different revisions of the same board. By selecting different revision in the Arduino menu different value of the predefined macro will be applied which is used inside the pins_arduino.h file to make different defines and values for the specific revision.
In addition to this esp32-poe pin definitions is added ethernet power enable pin and also defined macro: BOARD_HAS_1BIT_SDMMC
* Board T-Beam: Update pins_arduino.h
DAC2 is not wired, only DAC1 is -> corrected
LORA pins 27 + 19 are only wired on pcb, but not connected to header -> deleted
* Update pins_arduino.h
Button and LED added
* Add ttgo-lora32-v1 folder to variants folder
* Add ttgo-lora32-v1 info to boards.txt
* Add defs to pins_arduino.h for I2C OLED and SPI LoRa radio pinouts as per @stickbreaker
If you develop on windows and need cr/lf files, see this:
https://git-scm.com/book/en/v2/Customizing-Git-Git-Configuration#_formatting_and_whitespace
Git can handle this by auto-converting CRLF line endings into LF
when you add a file to the index, and vice versa when it checks out
code onto your filesystem. You can turn on this functionality with
the core.autocrlf setting. If you're on a Windows machine, set it
to true - this converts LF endings into CRLF when you check out code:
$ git config --global core.autocrlf true
M5Stack variant (pins_arduino.h) file is not automatically included,
because boards.txt m5stack-core-esp32.build.variant=esp32
This commit changes m5stack-core-esp32.build.variant from esp32 to m5stack_core_esp32
also rename M5Stack variant directory from m5stack-core-esp32 to m5stack_core_esp32
* Create new pocket_32 diretory for Pocket 32 board
* Create pins_arduino.h for pocket_32
* Update boards.txt to support Dongsen Tech Pocket 32 and fake "WeMos" WiFi&Bluetooth Battery
* Create new espino32 diretory for ESPino32 board
* Delete wrong create file
* Create pins_arduino.h for espino32
* Update boards.txt to support ThaiEasyElec ESPino32
* Re-configure board name
