* 20190916 - initial: support for Master mode, Pin and SSP
* 20190916 - initial: Add example app for Master mode
* 20190916 - initial: Force another build
* 20190916 - connect would use resolved address as preference and remove now redundant _remote_address
* 20190916 - rework set/reset/default pin logic
* 20190916 - cleanup: remove static vars, add/use constants, fix typos
* 20190916 - fix build issues and implement geoup events for status verification.
* 20190916 - remove extra lines,misc
* 20190916 - rework ESP_BT_GAP_DISC_RES_EVT, added SPP_DISCONNECTED bit for disconnect event. + timeout for disconnect()
* 20190916 - Small log change to improve log sequencing
* 20190916 - remove static from local vars
* 20190916 - Limited scope and duration for the scan, log device address during scan in info mode as it is very difficult to find out sometimes. Fixed get_name_from_eir() not resetting the name when called.
* 20190916 - break property for loop during scan when name matches.
* 20190916 - misc
* 20190916 - SPP_DISCONNECT state updates
* 20190916 - formatting, remove some strange syntax from initiator code
* 20190916 - Add comments to the example about connect(...) usage and timeouts
* 20190916 - fix disconnect() without timeout
* 20190916 - Add example comment to view BT address and name during connect(name)
* 20190916 - wording in example comments
* 20190916 - rework connect() and disconnect() methods to help with concurrency and more authoritative status returned back to caller. Automatic disconnect in connect() methods
* 20190916 - optimize code
* 20190916 - optimize code - more
* 20190916 - add timeout for pin set
* 20190916 - change scan mode to ESP_BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE
* 20190916 - update example code slightly
* 20190916 - increase READY_TIMEOUT to 10 secs
* 20190916 - typo in example and move waitForConnect() to static area
* 20190916 - update example comments
* 20190916 - update example comments
* 20190916 - update example comments
* 20190916 - add new example to remove paired devices from ESP32
* 20190916 - correct typo in example
* 20190916 - update example comment, add remove_bond_device() method for convenience.
* 20190916 - reword example comment.
* 20190916 - rename remove_bond_device()
* 20190916 - rename removePairedDevice() to unpairDevice()
* 20190916 - code review changes
* 20190916 - fix return value in setup() od example
* Add Added unimplemented getCharacteristicsByHandle function
Defined in BLERemoteService.h
But, Not included in BLERemoteService.cpp
* Delete log output
Pretty sure this was a typo as the deinit doesn't actually allow for reinit if that is an ifndef. Changed in my local copy and can now deinit and reinit just fine. Also, not sure why we are checking for the architecture here. Just curious.
* Added timeout to WiFiScan class to prevent haning at stucking at WIFI_SCAN_RUNNING when scan fails internally
* fixed tabs and returns, connected scanTimeout to max_scan_per_channel timeout
* Corrected tabs two
* Added static vars scanTimeout und scanStarted to WiFiScan.h protected section
* Fixed missing ; in line 64
* Fix persistance issue found, see ESP8266 issue #6152
* Correcting the parsing of the header for HTTP1.0
* Send 'Connection: Close' header in case of HTTP1.0
* Let reuse connection depend on protocol used: HTTP1.0 or HTTP1.1
* Fixed reuse, added null ptr checks, added check for _trainsportTraits in connect() in case _client was set null
* Fix reuse connection issues, similar to ESP8266 PR #6176
* Add generic IP calculations
Add:
calculateNetworkID(IPAddress ip, IPAddress subnet) => Calculate the network id using the ip and subnet (e.g. 192.168.0.0)
calculateBroadcast(IPAddress ip, IPAddress subnet) => Calculate the broadcast ip using the ip and subnet (e.g. 192.168.0.255)
calculateSubnetCIDR(IPAddress subnetMask) => Calculate the subnet CIDR using the subnet (e.g. 24)
Add:
broadcastIP() => Retrieve the network id (e.g. 192.168.0.0)
networkID() => Retrieve the broadcast IP (e.g. 192.168.0.255)
subnetCIDR() => Retrieve the subnet CIDR (e.g. 24)
Add:
broadcastIP() => Retrieve the network id (e.g. 192.168.0.0)
networkID() => Retrieve the broadcast IP (e.g. 192.168.0.255)
subnetCIDR() => Retrieve the subnet CIDR (e.g. 24)
Add:
softAPBroadcastIP() => Retrieve the network id (e.g. 192.168.0.0)
softAPNetwrokID() => Retrieve the broadcast IP (e.g. 192.168.0.255)
softAPSubnetCIDR() => Retrieve the subnet CIDR (e.g. 24)
Fixed bit shift in demo application of using RMT peripheral. Init data array to be transmitted was off by one, as for the first iteration (i==0) the mask was 1<<8, which results in shifted RGB value in color variable
Closes https://github.com/espressif/arduino-esp32/issues/2921
* Added convert method to transfer data from partition to nvs
* Could have sworn I changed the return when I made the label
* Empty state should be 0xFF. Fixed some logging levels
* Set result on success
