Commit Graph

328 Commits

Author SHA1 Message Date
chuck todd
80f9f9aeec fix removeApbChangeCallback() error in spiStopBus() (#3675)
* fix removeApbChangeCallback() error in spiStopBus()

spiStartBus() was using spiStopBus() to init the hardware, one of spiStopBus() functions is to unregister the runtime CPU clock speed change callback. But, spiStartBus() only wanted to init the hardware.  This patch separates the hardware init into a standalone function spiInitBus() that both spiStartBus() and spiStopBus() call.

* Update esp32-hal-spi.c

capitalization problem
2020-01-27 00:20:19 +02:00
Me No Dev
32d5654aa6
Implement rmtLoop to be able to continuously send pulses (#3650)
Number of pulses is limited to the reserved RMT memory for the channel. Very useful for PWM, Servo and other repeatable signals.
2020-01-20 19:43:13 +02:00
Dirk O. Kaar
0607d36734 HardwareSerial::write(const char*, ...) API compatibility to AVR, ESP8266, et al (#3585)
* API compatibility to AVR, ESP8266, et al

* Add non-blocking HardwareSerial::read(buffer, size) extension (ESP8266 portability)

* Refactor for fewer indirect calls.
2020-01-20 15:54:50 +02:00
Collin Kidder
7b3c1dfd50 Fix inability to use all buffers in RMT (#3512)
With the >= used let's say you have four RMT inputs, each using 2 channels wide for their receive buffer. This is 4*2 = 8 buffers which is the number of hardware buffers (MAX_CHANNELS). But, for the fourth input the starting buffer will be 6 (this is correct, the buffers used for each input are 0-1, 2-3, 4-5, 6-7). But, 6+2 = 8 which  is MAX_CHANNELS. This is valid but the >= would match against it and abort. It is correct to only abort if the value i+j is only greater than MAX_CHANNELS. Thus, a simple one character fix. Delete the equals sign.
2020-01-20 15:31:44 +02:00
Clemens Kirchgatterer
36075257c2 WString explicit converters to reduce Flash size (#3497)
* WString explicit converters to reduce Flash size

This is a port from the same patch for ESP8266: https://github.com/esp8266/Arduino/pull/6759/files
2020-01-20 15:29:16 +02:00
Me No Dev
d8b2098461
Use IDF's ADC Driver and Add analogReadMilliVolts (#3377) 2020-01-20 15:18:56 +02:00
TreeNewbeer
3fc974f3aa bugfix(touchpad):swap touch8 and touch9 #3584 (#3620) 2020-01-09 08:11:40 +02:00
chuck todd
9ad860758c Fix Memory leak in addApbChangeCallback() (#3560)
* `ledcWriteTone()` added a `apbcallback()` evertime the tone value was non zero.  
* `addApbChangeCallback()` did not detect duplicate callbacks.
* changed the apbcallback list to a double link to support roll forward, roll back execution.  This made the sequences of clock change callback start with the newest registered -> to oldest on the `before` then oldest -> newest after the clock change.  This made the UART debug log output have minimal gibberish during the clock change.
* change how the UART callback handled the MUTEX because if any `apbchangeCallback()` executed a `log_x()` a deadlock would occur.

This fixes #3555
2019-12-30 21:35:29 +02:00
rgot-org
cec3fca4ad Fix BluetoothSerial crash when restart (#3471)
* Update esp32-hal-bt.c

BluetoothSerial crash when restart:  this is because the BT controller remains in state  ESP_BT_CONTROLLER_STATUS_INITED instead of state  ESP_BT_CONTROLLER_STATUS_IDLE after the end() method.
in file esp_bt.h it is specified

> @brief Enable BT controller.
>                Due to a known issue, you cannot call esp_bt_controller_enable() a second time
>                 to change the controller mode dynamically. To change controller mode, call
>                esp_bt_controller_disable() and then call esp_bt_controller_enable() with the new mode.

after **esp_bt_controller_disable()** the controller remains in state INITED so we do call the **esp_bt_controller_deinit()** function to put the controller into state IDLE.

i have modified the **esp32-hal-bt.c** file
line 57 and next
(i have insert the esp_bt_controller_deinit() function so the controller go into Idle state)
```c++
bool btStop(){
    if(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_IDLE){
		log_i("bt stopped");
        return true;
    }
    if(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_ENABLED){
		log_i("bt enabled");
        if (esp_bt_controller_disable()) {
            log_e("BT Disable failed");
            return false;
        }
        while(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_ENABLED);
    }
    if(esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_INITED){
		log_i("inited");
		if (esp_bt_controller_deinit()) {
			log_e("BT deint failed");
			return false;
		}
		while (esp_bt_controller_get_status() == ESP_BT_CONTROLLER_STATUS_INITED);
        return true;
    }
    log_e("BT Stop failed");
    return false;
}
```

* Update esp32-hal-bt.c

remove while to avoid infinite loop
2019-11-11 18:31:09 +01:00
David J. Fiddes
dac493fb92 SPI: Fix discarded-qalifiers warning when compiling with all warnings (#3458)
* SPI: Fix discarded-qalifiers warning when compiling with all warnings

This fixes an error introduced with changeset b847f41 which
tightened the use of const for read-only data. The helper
funtion __transferBytes also requires the const qualifier on
outgoing data. Without this change a warning is displayed
when compiling with the Arduino IDE set to display "All"
compiler warnings.

Tests:
 - Build an ESP32 SPI sketch that uses static const data to send
   to an SPI device using the SPI.transferBytes() API

* SPI:Ensure all local functions are marked static

This audits all functions in the esp32-hal-xpi.c module and
ensures that any functions entirely local to the module are
marked as static.

Tests:
 - Build with Arduino set to show all warnings and ensure none
   are displayed

* SPI: Remove unused local __spiTranslate24 function

This removes the __spiTranslate24() function which is unused.
2019-11-11 17:44:49 +01:00
lbernstone
f41beb92bf Fixed so configTime will not crash if tcpip is not initialized (#3470) 2019-11-11 15:50:56 +01:00
chuck todd
7d2632c024 Implement Tx only Flush (#3433)
* add option to Flush() to only clear txQueue

Add the option to cause Flush() to just wait for tx data to clear the tx fifo and uart, leave the rx queue and rx fifo as is.

* support tx only flush()

* support tx only Flush()

* support txOnly for Flush()

* compatibility to Stream()

* compatibility for Stream()

* default value error

* default value error

* Update esp32-hal-uart.h

* Update esp32-hal-uart.c

* Update HardwareSerial.cpp

* sp

* correctly implement flushTxOnly()
2019-11-11 15:37:35 +01:00
David J. Fiddes
b847f41e24 SPI: Ensure all read-only data pointers are marked as const (#3356)
This changes all SPI functions that take data pointers which are
not modified so that the declaration is const. This allows them
to be used with const data (i.e. held in flash). No functional
changes are required.

The defnitions of spiWrite() and spiTransferBytes()  in
esp-hal-spi.h/c have been updated to be consistent.

Tests:
 - Build a simple sketch using SPI.writePattern() and
   SPI.transferBytes()  which uses const data and verify that the
   attached device functions as expected.
2019-10-14 20:39:27 +03:00
Dirk O. Kaar
c2b3f2d6af Make yield() overridable (#2991) 2019-10-04 12:49:39 +03:00
Dirk Mueller
6f70e27011 Base64::encode : const correctness / String by reference passing (#3314)
Avoid passing String by-value, which is slightly less efficient
as it involves a full copy-constructor/tempstring creation.
2019-10-02 14:29:24 +03:00
me-no-dev
f32083a6d0 Fix timerRestart
Closes: https://github.com/espressif/arduino-esp32/issues/2944

Thanks @atanisoft
2019-09-24 19:25:27 +03:00
Dirk O. Kaar
7fe2812f7f Inline ESP::getCycleCount() to make it safe to call from ISRs (#3165)
* Inline ESP::getCycleCount() to make it safe to call from ISRs

* Attribute IRAM_ATTR ISR-safe function in addition to inlining.
2019-09-11 14:29:53 +03:00
Me No Dev
f5cacfee1a
Remove extra connects from Client.h (#3191) 2019-09-09 09:36:22 +03:00
Jeroen88
f71a4bd406 Bugfix/detect baudrate (#3188)
* Expose uartStartDetectBaudrate(uart_t *) in esp32-hal-uart.h and call it from HardwareSerial::begin() if baudrate detection is requested (by passing a baudrate of 0) to solve baudrate detection problems

* Avoid a division by zero error in uartGetBaudRate()
2019-09-09 00:59:32 +03:00
Me No Dev
5f77b0108b
Fix return of Print::print(timeinfo, format) (#3189) 2019-09-09 00:36:30 +03:00
Tijs van Roon
717ca79ecb #3181 printf double vsnprintf() fix, malloc, va_end (#3184)
* Use loc_buf for small strings, check for error return from vsnprintf

* cleanup arg when bailing out of new

* Use malloc/free instead of new/delete in printf

* Return actual bytes written in printf

* FIX: write before free
2019-09-08 23:49:32 +03:00
Me No Dev
80ea521940
Add support for 160MHz rated CPUs (#3135)
Some ESP32 chips are rated only to 160MHz. This change adds support for them and does not allow frequency to be switched to 240MHz
2019-09-05 12:30:43 +03:00
Earle F. Philhower, III
fd089d8fd3 Pull in ESP8266 String::replace() fixes, others (#3143)
Pull in bugfixes from the ESP8266 repo for problems in the SSO
implementation of replace().  See the following patches for full
details:

54240d2cc5 (diff-8d9e71e16d437343017df828f0528f63)
78a1a66e6d (diff-8d9e71e16d437343017df828f0528f63)
4e9358445a (diff-8d9e71e16d437343017df828f0528f63)

Fixes #3140
2019-08-27 20:05:36 +03:00
Roman Savrulin
03066e42ef Flush UART RX queue too (#3009) 2019-08-20 16:48:52 +03:00
lbernstone
cd5257ad78 ESP.getCpuFreqMHz fix (#3007)
* ESP.getCpuFreqMHz was returning the CONFIG_ variable.  Now calls the getCpuFrequencyMhz function.

* Changed the Esp function to uint32_t to match
2019-08-20 16:48:26 +03:00
A C SREEDHAR REDDY
2a1fde7736 Include stdint for uint16_t (#3069) 2019-08-20 16:39:31 +03:00
Mike Dunston
007a93ec7e Update Print.cpp (#3060)
#2891
2019-08-20 16:36:04 +03:00
Brian Park
56ce580b0e Fix incorrect definition of FPSTR() and move from pgmspace.h to WString.h (#1371) (#2961) 2019-07-17 10:16:47 +03:00
chuck todd
d2816b2f32 Fix Unused Variable Warning (#2940)
Some Debugging variables were enabled at ERROR level instead of DEBUG.  Specifically `tAfter` and `tBefore`
2019-07-09 19:24:35 +03:00
Artur Bieniek
89feacb813 Fix map() division by zero (#2848) 2019-06-05 13:48:13 +02:00
Angus Gratton
2f249edb8e Use std::abs for a float-compatible abs() function (#2738)
* Other Arduino cores uses a macro to redefine libc abs() to take any
  type, meaning abs(-3.3) == 3.3 not the normal libc result of 3.

* 1e4bf14a3 (#1783) replaced similar min, max macros with c++ stdlib. However
  this change includes <algorithm> after the line which defines the abs() macro.
  <algorithm> includes <cstdlib> which undefines abs() and re-defines it.

* This means abs() becomes the plain libc version again which only takes
  integers, so abs(-3.3) == 3. As reported here:
  https://github.com/espressif/esp-idf/issues/3405

This fix tries to keep in the spirit of #1783 by using libstdc++. The other
option would be to include <cstdlib> before defining the abs() macro, so it
doesn't get undef-ed again later on.
2019-05-11 11:18:39 +03:00
Earle F. Philhower, III
bd57ff4ab4 StreamString SSO fix (#2736)
As found by @mongozmaki in https://github.com/esp8266/Arduino/pull/6035

With SSO implementation in String, StreamString::write generates wrong
strings under some circumstances.  Reason is that String::len() returns
strlen(sso_buf) if SSO=true but with newly written data
(in StreamString::write) the null-termination missing at the time len()
is called.

Furthermore, len() is called twice which is inefficient if SSO=true.
2019-05-11 11:16:05 +03:00
Me No Dev
50d142950d
Update esp32-hal-rmt.c 2019-05-01 20:10:41 +03:00
Earle F. Philhower, III
d13de284b8 Undo the redefinition of FPSTR from 8266 merge (#2726)
Fixes Arduino.h redefinition errors.
2019-04-30 16:52:14 +03:00
Earle F. Philhower, III
ab309e40d5 Copy ESP8266 String w/SSO to ESP32 repo (#2715)
I redid the ESP8266 WString library to enable small string optimization
(SSO) a while back, and think it would be helpful even on the ESP32 with
its higher memory complement.

SSO avoids lots of tiny mallocs() on the heap which cause fragmentation
by using the memory in the class object itself to store the actual
string and only mallocing() for buffers that are larger than what can
fit in thie class object.  Modern C++ std::string implementations have
this optimization as well, but since we're using Arduino strings we had
to roll our own.
2019-04-26 19:41:42 +03:00
Dirk O. Kaar
119ece2b0f Portability from ESP8266, virtual Stream member functions. (#2701) 2019-04-23 17:56:49 +03:00
me-no-dev
9a9ff62216 Add connect with timeout to Client class 2019-04-15 18:01:43 +02:00
me-no-dev
fa74767b2e Allow selecting in IDF the running core for Arduino's core tasks 2019-04-13 17:13:13 +02:00
me-no-dev
6dab3f6777 Fix LEDC channels above 8 not properly clearing
Fixes: https://github.com/espressif/arduino-esp32/issues/2660
2019-04-12 17:49:44 +02:00
Victor Aprea
25c0b52212 Alternative Improve _uploadReadByte (#2656)
* add opportunity for more than one retry to _uploadReadByte

* an alternative timeout-based method to making _uploadReadByte more resilient

* move timing variables in the correct scope

* implement and use client.getTimeout instead of hard-coded timeout in _uploadReadByte

* add missing return

* some refactoring to address respecting the timeout in a potentially deadlocked connection

* fix spelling in comment

* address review comments; move impl to cpp file for getTimeout, and remove local variable for currentMillis

* remove redundant cast

* need to check for timeout outside the inner while as well

* update WebUpdate example to print something in unexpected callback condition

* update log_e messages per review comments
2019-04-12 12:45:35 +02:00
chuck todd
91508030d8 Hide log_v behind conditional define, reduce excessive logging (#2641)
@cyberman54 from #2250 recommended reducing unnecessary logging.
2019-04-10 02:43:21 +02:00
A C SREEDHAR REDDY
0906bf580f update getLocalTime(). (#2629)
* update getLocalTime().

* change count to millis in getLocalTime

* timeout logic.
2019-04-10 02:39:14 +02:00
lbernstone
8e8c5035ea Added rmtDeinit to header. Fixes #2585 (#2587)
* Added rmtDeinit to header. Fixes #2585

* oops.  missing ;
2019-04-09 21:09:40 +02:00
Mike Dunston
f3c1a91f8e adding uartRxActive to expose the RX state machine status as a boolean value (#2457) 2019-03-03 15:47:24 +01:00
lbernstone
2bb32bd4b0 Unbiased random (#2468)
* An example to read high frequency analog data using i2s_adc

* Changed random() to use Lemire's method for bounding
2019-02-18 12:18:49 +02:00
Me No Dev
010a7c60f7
Update IDF to abea9e4c0 (#2458)
* Update IDF to abea9e4c0

* Update esptool

* Enable PSRAM for PICO D4

* Enable APP_ROLLBACK_ENABLE
2019-02-14 16:49:30 +01:00
Nguyen Hong Thiet
c0345eafbf fix missing the first bit in HC589 shift in (#2448) 2019-02-14 13:11:08 +01:00
Jeroen88
71ec3c3e31 Correct millis() error causes by micros() overflow every about 72 minutes (#2438) 2019-02-14 13:09:51 +01:00
chuck todd
8ec76405b9 Fix compile warning, esp32-hal-i2c.c (#2434)
@tread-Qualitrol discovered this error.
2019-02-14 13:09:05 +01:00
HanCheol Cho
8cbc60edbc fixed rmt receive data pointer position. (#2353) 2019-01-22 17:29:32 +08:00
Me No Dev
6cf307dbd1
Fix copy/paste error in RMT
Fixes: https://github.com/espressif/arduino-esp32/issues/2316
2019-01-14 19:30:07 +08:00
me-no-dev
81844f5360 Add API to feed the loop WDT (call from loop only) 2019-01-12 13:02:38 +01:00
chuck todd
9a7946e685 I2C fix READ of zero bytes hardware hang (#2301)
The i2c peripheral will hang if a READ request is issued with a zero data length.  The peripheral
drops into a continuous timeout interrupt response.  The STOP command can not be set out to the I2C
bus. The SLAVE device correctly ACK'd the address byte, with READ bit set, it has control of the SDA
 pin.  The ESP32 send out the next SCL HIGH pulse but, since the SLAVE is in READ Mode, and the First
bit it is sending happened to be a ZERO, the ESP32 cannot send the STOP.  When it releases SDA during
the SCL HIGH, the pin does not change state.  The pin stays low because the SLAVE is outputing a LOW!
The ESP32 drops into a perminent WAIT state waiting for SDA to go HIGH (the STOP).

**esp32-hal-i2c.c**
* add databuff length checks to `i2cRead()` and `i2cWrite()`
2019-01-10 21:37:13 +01:00
me-no-dev
70656aa129 fix leak in log_printf 2019-01-09 21:37:31 +01:00
Me No Dev
2fd39b1aff
Handle APB frequency change (#2250)
* Add APB change callbacks and move cpu code to own file

* Properly set esp_timer and FreeRTOS tick dividers

* Improve updated devisors

* No need to update REF_TICK yet

* Add initial handling for UART baud change

* fix uartWriteBuf and uartDetectBaudrate

* trigger callbacks even when APB did not change

* toggle UART ISR on CPU change

* add XTAL freq getter and add cpu freq validation

* Support CPU frequency changes in I2C (#2287)

**esp32-hal-i2c.c**
* add callback for cpu frequency changes
* adjust fifo thresholds based on cpu frequency and i2c bus frequency
* reduce i2c bus frequency if differential is too small
**Wire.h**
* version to 1.1.0

* Implement clock change for the other peripherals

* remove bad CPU clock values from the menu

* Add note to CPU freqs that support WiFi and BT
2019-01-09 10:07:54 +01:00
me-no-dev
28ea39cf05 Add WDT API for Core 0 and disable it while SPIFFS is formatting 2018-12-28 21:14:46 +02:00
Me No Dev
f49c854ff3
Update IDF to 97eecfa, enable reboot on WDT and add WDT API (#2248)
* Update IDF to 97eecfa and enable reboot on WDT

* Add API to enable/disable WDT for Core 1 and Arduino Loop
2018-12-28 20:37:33 +02:00
me-no-dev
879388e170 Update esp32-hal-gpio.c
fix copy/paste error
2018-12-28 19:14:15 +02:00
Me No Dev
1085e9a8f0
Fix bad multiplier calculation 2018-12-24 13:55:08 +02:00
Tomasz Ścisłowicz
5af139bb74 HardwareSerial - add changeBaudRate method (#2223)
* Add updateBaudRate to hardware serial

* remove flush

* Fix tab
2018-12-23 21:15:06 +02:00
atanisoft
4f9a90fa0e fix #2232 and #2033 (#2233) 2018-12-23 19:06:43 +02:00
chuck todd
310e78e6fd Support CPU frequency changes (#2222)
The I2C hardware has limitations on min and max bus frequency directly related to CPU frequency, bus speed cannot be greater than 1/100 CPU clock, nor less than CPU clock / 8192.
2018-12-20 08:56:02 +01:00
Me No Dev
c827bb4177
CPU and APB Frequency support (#2220)
* Add support to HAL for APB frequencies different than 80MHz

* Add support for CPU frequencies in the IDE board menu

* Switch to fast set_config

* Add method to uart so debug can be reassigned after apb frequency switch

* Return real APB frequency
2018-12-20 01:57:32 +01:00
me-no-dev
3e66aeff84 Handle better 160MHz cpu clock 2018-12-18 22:04:02 +01:00
me-no-dev
66d33f792c Add support for CPU Frequency switching
Experimental!
2018-12-18 20:04:16 +01:00
atanisoft
39836f12df correct bounds checking in Print::printf to avoid corner case of len=64 (#2204) 2018-12-16 17:09:26 +01:00
Me No Dev
6f6ee98188
Update ESP-IDF da2116f + esp32-camera f8f26ab + BLE b232e7f (#2194)
* ESP-IDF da2116f + esp32-camera f8f26ab +BLE b232e7f

* Fix fail compilation due to missing cpp guard
2018-12-15 17:38:34 +01:00
Jeroen88
1289f4be4b Add MD5 computation to Esp and add request header with MD5 hash of the running sketch to HTTPUpdate (#2176) 2018-12-11 02:06:58 +01:00
Andy Horner
70f000da71 Fix a compilation error if Bluetooth not enabled (#2172) 2018-12-10 10:11:37 +01:00
Jeroen88
884e417a49 Fix HTTPUpdate flash size check and add SPIFFS size check (#2161)
* Fix error in PR #2048: if ::available() is called before ::connect() _rxBuffer is not initialised

* Fixed flash size check and added SPIFFS size check

* Rewriting ESP.getFreeSketchSpace(), moving code from HTTPUpdate.cpp
2018-12-06 20:39:52 +01:00
Luc
ce340faf94 Clean warnings when all warning enabled (#2112)
* Clean warnings when all warning enabled

Not used variables / functions due to debug log

Dual define with different values :
cores\esp32/binary.h
#define B110 6
#define B1000000 64

tools/sdk/include/newlib/sys/termios.h
#define B110        3
#define B1000000   23

Local variable returned in WiFiclient Secure

* change due to deprecated function

* Update with proper variable and label

* Update esp32-hal-i2c.c

* Apply changes requested

* Fix warnings due to #define conflict thanks @atanisoft
2018-11-29 11:34:55 +01:00
me-no-dev
fcd734a13c Some fixes found by gcc 8 2018-11-28 00:35:43 +01:00
Jamie Parkinson
e609c78f20 Initialize detectedBaudRate to prevent compilation errors (#2101) 2018-11-26 23:22:37 +01:00
Bert Melis
44ca2ee976 Fix uart TX flushing (#2029)
wait for FSM to return idle
2018-11-19 17:04:05 +01:00
lbernstone
af79e18ecb Added ESP:: functions for sketch size (#2028)
* Added ESP:: functions for sketch size

* Fixed free space name to match ESP8266
2018-11-19 17:03:36 +01:00
Marcel Kottmann
259ff80d60 use libbase64 macro to calculate base64 length (#2007) 2018-11-19 17:01:38 +01:00
Jeroen88
233d31bed2 Added baudrate detection to esp32-hal-uart and HardwareSerial (#1961)
* Added baudrate detection to esp32-hal-uart and HardwareSerial

* Solved compiler warning for uartResizeRxBuffer()

* Add unit to header variable name (timeout_ms)

* Reverting accidentally changed files to master

* Add small delay after baudrate detection
2018-11-19 16:51:55 +01:00
Terry J Myers
1bc1e8c602 Update WString.cpp (#1936) 2018-11-19 16:45:09 +01:00
Terry J Myers
2132d9f809 Update WString.h (#1935) 2018-11-19 16:44:53 +01:00
Mark D
f12df4c719 allow component projects to compile with CONFIG_DISABLE_HAL_LOCKS (#1880) 2018-11-19 16:39:42 +01:00
chuck todd
e5ea089a7f Reduce resource requirements, Share Interrupt (#1877)
#1869 exposed a resource exhaustion issue. The current HAL layer for I2C support is designed to use a shared interrupt, But, during debugging to solve the interrupt overloading condition identified in #1588, and the generation of pr #1717, the interrupt allocation parameters were changed.  This change was unnecessary, the code will work successfully with shared interrupts.  So, there is no need to assign a private interrupt for each I2C peripheral.
2018-09-21 08:40:01 +02:00
Me No Dev
96822d783f
Update IDF to 3.2-3276a13 and esptool.py to 2.5.0 (#1878)
* TX Flow Control and Code cleanup

* Use semaphore instead of delay

TX functionality is done.

* Use single buffer and empty queue on exit

* Fix compile issues because of LwIP code relocation

* Add temporary header to fix Azure not compiling

* Fix AsyncUDP early init

* AsyncUDP Multicast fixes

* Add source mac address and rework multicast

* Allow redefinition of default pins for Serials 1 and 2

* Update IDF to 3276a13

* Update esptool.py to 2.5.0

* Fix sketches

* Fix log level in BluetoothSetial
2018-09-21 08:39:36 +02:00
david-cermak
4e96bffe0e Initial version of rmt driver (#1525)
* rmt driver initial version

* supporting conti mode plus interrupts

* using conitnous mode for sending more data

* working continous mode

* rmt driver cleanup after conti mode

* initial version of rmt driver

* adding a simple example

* adding channel and block locks

* modified of rmt interface for simpler/easier usage

* adding header sentinels, split interface to common and additional settings

* Fixes per code review + support for rx callback mode

* renamed internal structures and enums, fixed formatting

* cmake support for rmt

* refactored tx-conti interrupts to function to make it more readable

* added Tx and Rx examples

* added license headers

* minor updates per review

* used struct access, renamed defines, corrected diagram
2018-09-17 23:19:27 +02:00
hreintke
ea61563c69 Functional interrupt (#1728)
* Initial

* Implementation

* Add to CMakelist.txt

* Add example

* Add IRAM_ATTR
2018-09-17 23:13:58 +02:00
hreintke
5be3078b76 InterruptArg should take voidFuncPtrArg as argument (#1776) 2018-09-17 23:10:13 +02:00
Junxiao Shi
1e4bf14a3e cores: replace max, min, round macros with imports from std (#1783)
fixes #1734
2018-09-17 21:33:01 +02:00
Baruch Nissenbaum
a6a9a518a7 _uart_isr use wr_addr != rd_addr as test for internal queue not empty (#1849) 2018-09-17 21:19:51 +02:00
Adam Coddington
ce61074802 Add functionality allowing rxBuffer of HardwareSerial to be changed in size via HardwareSerial::setRxBufferSize. (#1855) 2018-09-17 21:16:18 +02:00
me-no-dev
80c110ece7 Add more methods to access memory properties 2018-08-18 17:10:35 +02:00
me-no-dev
65511b23d3 Add separate method to get free PSRAM and report only internal in getFreeHeap 2018-08-18 16:34:41 +02:00
chuck todd
9db207afbe Improve bus recovery (#1767)
If the esp32 is reset during a i2c read cycle the slave device may be in control of the SDA line.  

If the SDA line is held low, the esp32 cannot issue a START or STOP to recover the bus. 

The previous code did not correctly configure the SCL output pin, and it cycled SCL 9 times with SDA Low.  Since the slave device was in a READ cycle, it just continued outputting the bits of the current byte.  When the ACK/NAK bit space occurred, The low output value of SDA was interpreted as ACK so the slave device continued with the next byte.  It never terminated the READ cycle. 

This new code will correctly recover from an interrupted READ
2018-08-18 08:50:59 +02:00
chuck todd
b05430cfd9 Wire ReSTART fix, with others (#1717)
* ReSTART fix, Sequencing fix

pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill.  during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence.  The problem manifested as an ACK error. 
In addition to this required bug fix I propose:
* `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported.  Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure.
* `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus.  With the functional change to `Wire.begin()` this allows app level recover of a hung bus.
* `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()`  had no room to record the directed address bytes.  It generated just a NAK check without setting the EEPROMs internal register address.  The succeeding ReSTART read succeeded at incorrect address.
* Changes to the HAL layer:
** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently
** added `i2cDebug()` programmatic control of debug buffer output
** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers.
** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points 
 
*

* Update esp32-hal-i2c.c

* Update Wire.cpp

* ReSTART, Sequencing

pr #1665 introduce a problem with ReSTART, when solving this problem I found an interaction between the TxFifo refill, RxFifo empty and CMD[] fill.  during certain sequences a dataqueue command would be skipped, this skipping resulted in a mismatch between the contents of the TxFifo and the i2c command sequence.  The problem manifested as an ACK error. 
In addition to this required bug fix I propose:
* `Wire.begin()` be changed from a `void` to a `bool` this will allow the reset functionality of `Wire.begin()` to be reported.  Currently `Wire.begin()` attempts to reset the i2c Peripheral, but cannot report success/failure.
* `Wire.busy()` be added. this `bool` function returns the hardware status of the bus. This status can be use in multi-master environments for application level interleaving of commands, also in single master environment, it can be used to detect a 'hung' bus.  With the functional change to `Wire.begin()` this allows app level recover of a hung bus.
* `Wire.lastError()` value updated for all errors, previously when interleaving `Wire.endTransmission(false)` and `Wire.readTransmission(false)`, the 128 byte `Wire.write()` buffer was exhausted without generating and error(very exotic). I discovered this error when I created a sequence of directed reads to a EEPROM. Each directed read used 2 bytes of the 128 byte `write()` buffer, so after 64 consecutive ReSTART writes with ReSTART reads, `Wire()`  had no room to record the directed address bytes.  It generated just a NAK check without setting the EEPROMs internal register address.  The succeeding ReSTART read succeeded at incorrect address.
* Changes to the HAL layer:
** added `i2cGetStatus()` which returns the i2c peripheral status word, used to detect bus_busy currently
** added `i2cDebug()` programmatic control of debug buffer output
** changed `i2cAddQueue()` to allow data_only queue element this will allow a i2c transaction to use multiple data pointers.
** removed direct access to DumpInts(), DumpI2c() from app, use i2cDebug() to set trigger points 
 
*

* Forgot DebugFlags Return

@andriyadi found this, total brain fade on my part.
2018-08-14 11:51:15 +02:00
me-no-dev
f9a382ab9f fix some compilation error and warnings in i2c 2018-07-24 22:06:50 +02:00
chuck todd
8d7fb58672 Fix for spurious interrupts during I2C communications (#1665)
This version no longer needs an interrupt for each byte transferred. It only needs interrupts for START, STOP, FIFO empty/Full or error conditions.  This dramatically reduces the interrupt overhead.  I think the prior version was causing an interrupt overload condition where the ISR was not able to process every interrupt as they happened.
2018-07-24 19:43:45 +02:00
chuck todd
28a410dd50 Spurious Interrupts Temporary fix 20180711 (#1625)
the 'eject' ERROR is and indication of an interrupt triggering without an source.  I am working to eliminate these serviceable interrupt.  This update increase stability on a HelTek Wifi Lora 32 board. with a SSD1306 OLED.  This update fixes a glaring error in the interrupt allocation code, the Interrupt mask was wrong.  I also dynamically adjust the FiFo thresholds based on Bus clockrate. The change to FiFo thresholds has reduced the number for 'eject' events.  I also change 'eject' from and ERROR to DEBUG.  An 'eject' event does not compromise i2c transmissions. It happens after a transaction has completed. 

Chuck.
2018-07-12 15:18:26 +02:00
Bert Melis
c77aed4ac4 Allow using argument with attachInterrupt (#1535)
* Allow using argument with attachInterrupt

* formatting

replace tabs with spaces

* fix bug more then 1 interrupt

* leftover

* add example

* make attachInterruptArg public

* update example

* leftover
2018-07-07 11:26:58 +02:00
me-no-dev
5e46c9bae6 Add Wrover Support and Option to enable SPIRAM 2018-07-03 23:03:50 +02:00
me-no-dev
4e5cbdaa7f Add declarations for all Serial, SPI and Wire buses 2018-07-03 20:41:03 +02:00
chemicstry
12ca9e8b52 Port UART reset fix from ESP-IDF (#1408) 2018-07-03 17:54:08 +02:00
chuck todd
6411ac4e3c Remove confusing Debug output. (#1574)
If Core Debug Level is at DEBUG, a confusing debug message will be emitted if the I2C transaction takes longer complete than the  calculated minimum time.  This original debug message was just to prove that this new i2c code could correctly handle SCL stretching or interrupt latency issues. This delay is not a problem, or an error.  Usually it is caused by a higher priory interrupt starving the i2c ISR.  Usually WiFi is the culprit.  As long of this delay is within the configured timeout (by default 50ms, or can be set with Wire.setTimeOut(milliseconds);) no problem will occur and the transaction will successfully complete.
Chuck.
2018-07-02 18:22:05 +02:00