// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. /* * Example Use * static camera_config_t camera_example_config = { .pin_pwdn = PIN_PWDN, .pin_reset = PIN_RESET, .pin_xclk = PIN_XCLK, .pin_sscb_sda = PIN_SIOD, .pin_sscb_scl = PIN_SIOC, .pin_d7 = PIN_D7, .pin_d6 = PIN_D6, .pin_d5 = PIN_D5, .pin_d4 = PIN_D4, .pin_d3 = PIN_D3, .pin_d2 = PIN_D2, .pin_d1 = PIN_D1, .pin_d0 = PIN_D0, .pin_vsync = PIN_VSYNC, .pin_href = PIN_HREF, .pin_pclk = PIN_PCLK, .xclk_freq_hz = 20000000, .ledc_timer = LEDC_TIMER_0, .ledc_channel = LEDC_CHANNEL_0, .pixel_format = PIXFORMAT_JPEG, .frame_size = FRAMESIZE_SVGA, .jpeg_quality = 10, .fb_count = 2 }; esp_err_t camera_example_init(){ return esp_camera_init(&camera_example_config); } esp_err_t camera_example_capture(){ //capture a frame camera_fb_t * fb = esp_camera_fb_get(); if (!fb) { ESP_LOGE(TAG, "Frame buffer could not be acquired"); return ESP_FAIL; } //replace this with your own function display_image(fb->width, fb->height, fb->pixformat, fb->buf, fb->len); //return the frame buffer back to be reused esp_camera_fb_return(fb); return ESP_OK; } */ #pragma once #include "esp_err.h" #include "driver/ledc.h" #include "sensor.h" #ifdef __cplusplus extern "C" { #endif /** * @brief Configuration structure for camera initialization */ typedef struct { int pin_pwdn; /*!< GPIO pin for camera power down line */ int pin_reset; /*!< GPIO pin for camera reset line */ int pin_xclk; /*!< GPIO pin for camera XCLK line */ int pin_sscb_sda; /*!< GPIO pin for camera SDA line */ int pin_sscb_scl; /*!< GPIO pin for camera SCL line */ int pin_d7; /*!< GPIO pin for camera D7 line */ int pin_d6; /*!< GPIO pin for camera D6 line */ int pin_d5; /*!< GPIO pin for camera D5 line */ int pin_d4; /*!< GPIO pin for camera D4 line */ int pin_d3; /*!< GPIO pin for camera D3 line */ int pin_d2; /*!< GPIO pin for camera D2 line */ int pin_d1; /*!< GPIO pin for camera D1 line */ int pin_d0; /*!< GPIO pin for camera D0 line */ int pin_vsync; /*!< GPIO pin for camera VSYNC line */ int pin_href; /*!< GPIO pin for camera HREF line */ int pin_pclk; /*!< GPIO pin for camera PCLK line */ int xclk_freq_hz; /*!< Frequency of XCLK signal, in Hz. Either 20KHz or 10KHz for OV2640 double FPS (Experimental) */ ledc_timer_t ledc_timer; /*!< LEDC timer to be used for generating XCLK */ ledc_channel_t ledc_channel; /*!< LEDC channel to be used for generating XCLK */ pixformat_t pixel_format; /*!< Format of the pixel data: PIXFORMAT_ + YUV422|GRAYSCALE|RGB565|JPEG */ framesize_t frame_size; /*!< Size of the output image: FRAMESIZE_ + QVGA|CIF|VGA|SVGA|XGA|SXGA|UXGA */ int jpeg_quality; /*!< Quality of JPEG output. 0-63 lower means higher quality */ size_t fb_count; /*!< Number of frame buffers to be allocated. If more than one, then each frame will be acquired (double speed) */ } camera_config_t; /** * @brief Data structure of camera frame buffer */ typedef struct { uint8_t * buf; /*!< Pointer to the pixel data */ size_t len; /*!< Length of the buffer in bytes */ size_t width; /*!< Width of the buffer in pixels */ size_t height; /*!< Height of the buffer in pixels */ pixformat_t format; /*!< Format of the pixel data */ } camera_fb_t; #define ESP_ERR_CAMERA_BASE 0x20000 #define ESP_ERR_CAMERA_NOT_DETECTED (ESP_ERR_CAMERA_BASE + 1) #define ESP_ERR_CAMERA_FAILED_TO_SET_FRAME_SIZE (ESP_ERR_CAMERA_BASE + 2) #define ESP_ERR_CAMERA_NOT_SUPPORTED (ESP_ERR_CAMERA_BASE + 3) /** * @brief Initialize the camera driver * * @note call camera_probe before calling this function * * This function detects and configures camera over I2C interface, * allocates framebuffer and DMA buffers, * initializes parallel I2S input, and sets up DMA descriptors. * * Currently this function can only be called once and there is * no way to de-initialize this module. * * @param config Camera configuration parameters * * @return ESP_OK on success */ esp_err_t esp_camera_init(const camera_config_t* config); /** * @brief Deinitialize the camera driver * * @return * - ESP_OK on success * - ESP_ERR_INVALID_STATE if the driver hasn't been initialized yet */ esp_err_t esp_camera_deinit(); /** * @brief Obtain pointer to a frame buffer. * * @return pointer to the frame buffer */ camera_fb_t* esp_camera_fb_get(); /** * @brief Return the frame buffer to be reused again. * * @param fb Pointer to the frame buffer */ void esp_camera_fb_return(camera_fb_t * fb); /** * @brief Get a pointer to the image sensor control structure * * @return pointer to the sensor */ sensor_t * esp_camera_sensor_get(); #ifdef __cplusplus } #endif #include "img_converters.h"