// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. #include "esp32-hal-uart.h" #include "esp32-hal.h" #include "freertos/FreeRTOS.h" #include "freertos/task.h" #include "freertos/queue.h" #include "freertos/semphr.h" #include "rom/ets_sys.h" #include "esp_attr.h" #include "esp_intr.h" #include "rom/uart.h" #include "soc/uart_reg.h" #include "soc/uart_struct.h" #include "soc/io_mux_reg.h" #include "soc/gpio_sig_map.h" #include "soc/dport_reg.h" #define ETS_UART_INUM 5 #define ETS_UART2_INUM ETS_UART_INUM #define UART_REG_BASE(u) ((u==0)?DR_REG_UART_BASE:( (u==1)?DR_REG_UART1_BASE:( (u==2)?DR_REG_UART2_BASE:0))) #define UART_RXD_IDX(u) ((u==0)?U0RXD_IN_IDX:( (u==1)?U1RXD_IN_IDX:( (u==2)?U2RXD_IN_IDX:0))) #define UART_TXD_IDX(u) ((u==0)?U0TXD_OUT_IDX:( (u==1)?U1TXD_OUT_IDX:( (u==2)?U2TXD_OUT_IDX:0))) #define UART_INTR_SOURCE(u) ((u==0)?ETS_UART0_INTR_SOURCE:( (u==1)?ETS_UART1_INTR_SOURCE:((u==2)?ETS_UART2_INTR_SOURCE:0))) static int s_uart_debug_nr = 0; struct uart_struct_t { uart_dev_t * dev; #if !CONFIG_DISABLE_HAL_LOCKS xSemaphoreHandle lock; #endif uint8_t num; xQueueHandle queue; }; #if CONFIG_DISABLE_HAL_LOCKS #define UART_MUTEX_LOCK() #define UART_MUTEX_UNLOCK() static uart_t _uart_bus_array[3] = { {(volatile uart_dev_t *)(DR_REG_UART_BASE), 0, NULL}, {(volatile uart_dev_t *)(DR_REG_UART1_BASE), 1, NULL}, {(volatile uart_dev_t *)(DR_REG_UART2_BASE), 2, NULL} }; #else #define UART_MUTEX_LOCK() do {} while (xSemaphoreTake(uart->lock, portMAX_DELAY) != pdPASS) #define UART_MUTEX_UNLOCK() xSemaphoreGive(uart->lock) static uart_t _uart_bus_array[3] = { {(volatile uart_dev_t *)(DR_REG_UART_BASE), NULL, 0, NULL}, {(volatile uart_dev_t *)(DR_REG_UART1_BASE), NULL, 1, NULL}, {(volatile uart_dev_t *)(DR_REG_UART2_BASE), NULL, 2, NULL} }; #endif static void IRAM_ATTR _uart_isr(void *arg) { uint8_t i, c; BaseType_t xHigherPriorityTaskWoken; uart_t* uart; for(i=0;i<3;i++){ uart = &_uart_bus_array[i]; uart->dev->int_clr.rxfifo_full = 1; uart->dev->int_clr.frm_err = 1; uart->dev->int_clr.rxfifo_tout = 1; while(uart->dev->status.rxfifo_cnt) { c = uart->dev->fifo.rw_byte; if(uart->queue != NULL && !xQueueIsQueueFullFromISR(uart->queue)) { xQueueSendFromISR(uart->queue, &c, &xHigherPriorityTaskWoken); } } } if (xHigherPriorityTaskWoken) { portYIELD_FROM_ISR(); } } void uartEnableGlobalInterrupt() { xt_set_interrupt_handler(ETS_UART_INUM, _uart_isr, NULL); ESP_INTR_ENABLE(ETS_UART_INUM); } void uartDisableGlobalInterrupt() { ESP_INTR_DISABLE(ETS_UART_INUM); xt_set_interrupt_handler(ETS_UART_INUM, NULL, NULL); } void uartEnableInterrupt(uart_t* uart) { UART_MUTEX_LOCK(); uart->dev->conf1.rxfifo_full_thrhd = 112; uart->dev->conf1.rx_tout_thrhd = 2; uart->dev->conf1.rx_tout_en = 1; uart->dev->int_ena.rxfifo_full = 1; uart->dev->int_ena.frm_err = 1; uart->dev->int_ena.rxfifo_tout = 1; uart->dev->int_clr.val = 0xffffffff; intr_matrix_set(xPortGetCoreID(), UART_INTR_SOURCE(uart->num), ETS_UART_INUM); UART_MUTEX_UNLOCK(); } void uartDisableInterrupt(uart_t* uart) { UART_MUTEX_LOCK(); uart->dev->conf1.val = 0; uart->dev->int_ena.val = 0; uart->dev->int_clr.val = 0xffffffff; UART_MUTEX_UNLOCK(); } void uartDetachRx(uart_t* uart) { if(uart == NULL) { return; } pinMatrixInDetach(UART_RXD_IDX(uart->num), false, false); uartDisableInterrupt(uart); } void uartDetachTx(uart_t* uart) { if(uart == NULL) { return; } pinMatrixOutDetach(UART_TXD_IDX(uart->num), false, false); } void uartAttachRx(uart_t* uart, uint8_t rxPin, bool inverted) { if(uart == NULL || rxPin > 39) { return; } pinMode(rxPin, INPUT); pinMatrixInAttach(rxPin, UART_RXD_IDX(uart->num), inverted); uartEnableInterrupt(uart); uartEnableGlobalInterrupt(); } void uartAttachTx(uart_t* uart, uint8_t txPin, bool inverted) { if(uart == NULL || txPin > 39) { return; } pinMode(txPin, OUTPUT); pinMatrixOutAttach(txPin, UART_TXD_IDX(uart->num), inverted, false); } uart_t* uartBegin(uint8_t uart_nr, uint32_t baudrate, uint32_t config, int8_t rxPin, int8_t txPin, uint16_t queueLen, bool inverted) { if(uart_nr > 2) { return NULL; } if(rxPin == -1 && txPin == -1) { return NULL; } uart_t* uart = &_uart_bus_array[uart_nr]; #if !CONFIG_DISABLE_HAL_LOCKS if(uart->lock == NULL) { uart->lock = xSemaphoreCreateMutex(); if(uart->lock == NULL) { return NULL; } } #endif if(queueLen && uart->queue == NULL) { uart->queue = xQueueCreate(queueLen, sizeof(uint8_t)); //initialize the queue if(uart->queue == NULL) { return NULL; } } if(uart_nr == 1){ DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UART1_CLK_EN); DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UART1_RST); } else if(uart_nr == 2){ DPORT_SET_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, DPORT_UART2_CLK_EN); DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, DPORT_UART2_RST); } uartFlush(uart); uartSetBaudRate(uart, baudrate); UART_MUTEX_LOCK(); uart->dev->conf0.val = config; #define TWO_STOP_BITS_CONF 0x3 #define ONE_STOP_BITS_CONF 0x1 if ( uart->dev->conf0.stop_bit_num == TWO_STOP_BITS_CONF) { uart->dev->conf0.stop_bit_num = ONE_STOP_BITS_CONF; uart->dev->rs485_conf.dl1_en = 1; } UART_MUTEX_UNLOCK(); if(rxPin != -1) { uartAttachRx(uart, rxPin, inverted); } if(txPin != -1) { uartAttachTx(uart, txPin, inverted); } return uart; } void uartEnd(uart_t* uart) { if(uart == NULL) { return; } UART_MUTEX_LOCK(); if(uart->queue != NULL) { uint8_t c; while(xQueueReceive(uart->queue, &c, 0)); vQueueDelete(uart->queue); uart->queue = NULL; } uart->dev->conf0.val = 0; UART_MUTEX_UNLOCK(); uartDetachRx(uart); uartDetachTx(uart); } uint32_t uartAvailable(uart_t* uart) { if(uart == NULL || uart->queue == NULL) { return 0; } return uxQueueMessagesWaiting(uart->queue); } uint8_t uartRead(uart_t* uart) { if(uart == NULL || uart->queue == NULL) { return 0; } uint8_t c; if(xQueueReceive(uart->queue, &c, 0)) { return c; } return 0; } uint8_t uartPeek(uart_t* uart) { if(uart == NULL || uart->queue == NULL) { return 0; } uint8_t c; if(xQueuePeek(uart->queue, &c, 0)) { return c; } return 0; } void uartWrite(uart_t* uart, uint8_t c) { if(uart == NULL) { return; } UART_MUTEX_LOCK(); while(uart->dev->status.txfifo_cnt == 0x7F); uart->dev->fifo.rw_byte = c; UART_MUTEX_UNLOCK(); } void uartWriteBuf(uart_t* uart, const uint8_t * data, size_t len) { if(uart == NULL) { return; } UART_MUTEX_LOCK(); while(len) { while(len && uart->dev->status.txfifo_cnt < 0x7F) { uart->dev->fifo.rw_byte = *data++; len--; } } UART_MUTEX_UNLOCK(); } void uartFlush(uart_t* uart) { if(uart == NULL) { return; } UART_MUTEX_LOCK(); while(uart->dev->status.txfifo_cnt); uart->dev->conf0.txfifo_rst = 1; uart->dev->conf0.txfifo_rst = 0; uart->dev->conf0.rxfifo_rst = 1; uart->dev->conf0.rxfifo_rst = 0; UART_MUTEX_UNLOCK(); } void uartSetBaudRate(uart_t* uart, uint32_t baud_rate) { if(uart == NULL) { return; } UART_MUTEX_LOCK(); uint32_t clk_div = ((UART_CLK_FREQ<<4)/baud_rate); uart->dev->clk_div.div_int = clk_div>>4 ; uart->dev->clk_div.div_frag = clk_div & 0xf; UART_MUTEX_UNLOCK(); } uint32_t uartGetBaudRate(uart_t* uart) { if(uart == NULL) { return 0; } uint32_t clk_div = (uart->dev->clk_div.div_int << 4) | (uart->dev->clk_div.div_frag & 0x0F); return ((UART_CLK_FREQ<<4)/clk_div); } static void IRAM_ATTR uart0_write_char(char c) { while(((ESP_REG(0x01C+DR_REG_UART_BASE) >> UART_TXFIFO_CNT_S) & 0x7F) == 0x7F); ESP_REG(DR_REG_UART_BASE) = c; } static void IRAM_ATTR uart1_write_char(char c) { while(((ESP_REG(0x01C+DR_REG_UART1_BASE) >> UART_TXFIFO_CNT_S) & 0x7F) == 0x7F); ESP_REG(DR_REG_UART1_BASE) = c; } static void IRAM_ATTR uart2_write_char(char c) { while(((ESP_REG(0x01C+DR_REG_UART2_BASE) >> UART_TXFIFO_CNT_S) & 0x7F) == 0x7F); ESP_REG(DR_REG_UART2_BASE) = c; } void uartSetDebug(uart_t* uart) { if(uart == NULL || uart->num > 2) { s_uart_debug_nr = -1; ets_install_putc1(NULL); return; } if(s_uart_debug_nr == uart->num) { return; } s_uart_debug_nr = uart->num; switch(s_uart_debug_nr) { case 0: ets_install_putc1((void (*)(char)) &uart0_write_char); break; case 1: ets_install_putc1((void (*)(char)) &uart1_write_char); break; case 2: ets_install_putc1((void (*)(char)) &uart2_write_char); break; default: ets_install_putc1(NULL); break; } } int uartGetDebug() { return s_uart_debug_nr; } int log_printf(const char *format, ...) { if(s_uart_debug_nr < 0){ return 0; } static char loc_buf[64]; char * temp = loc_buf; int len; va_list arg; va_list copy; va_start(arg, format); va_copy(copy, arg); len = vsnprintf(NULL, 0, format, arg); va_end(copy); if(len >= sizeof(loc_buf)){ temp = (char*)malloc(len+1); if(temp == NULL) { return 0; } } vsnprintf(temp, len+1, format, arg); #if !CONFIG_DISABLE_HAL_LOCKS if(_uart_bus_array[s_uart_debug_nr].lock){ while (xSemaphoreTake(_uart_bus_array[s_uart_debug_nr].lock, portMAX_DELAY) != pdPASS); ets_printf("%s", temp); xSemaphoreGive(_uart_bus_array[s_uart_debug_nr].lock); } else { ets_printf("%s", temp); } #else ets_printf("%s", temp); #endif va_end(arg); if(len > 64){ free(temp); } return len; }