/** * @file * * lwIP Options Configuration */ /* * Copyright (c) 2001-2004 Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Adam Dunkels * */ #ifndef LWIP_HDR_OPT_H #define LWIP_HDR_OPT_H /* * Include user defined options first. Anything not defined in these files * will be set to standard values. Override anything you don't like! */ #include "lwipopts.h" #include "lwip/debug.h" /* ----------------------------------------------- ---------- Platform specific locking ---------- ----------------------------------------------- */ /** * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain * critical regions during buffer allocation, deallocation and memory * allocation and deallocation. */ #ifndef SYS_LIGHTWEIGHT_PROT #define SYS_LIGHTWEIGHT_PROT 0 #endif /** * NO_SYS==1: Provides VERY minimal functionality. Otherwise, * use lwIP facilities. */ #ifndef NO_SYS #define NO_SYS 0 #endif /** * NO_SYS_NO_TIMERS==1: Drop support for sys_timeout when NO_SYS==1 * Mainly for compatibility to old versions. */ #ifndef NO_SYS_NO_TIMERS #define NO_SYS_NO_TIMERS 0 #endif /** * MEMCPY: override this if you have a faster implementation at hand than the * one included in your C library */ #ifndef MEMCPY #define MEMCPY(dst,src,len) memcpy(dst,src,len) #endif /** * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a * call to memcpy() if the length is known at compile time and is small. */ #ifndef SMEMCPY #define SMEMCPY(dst,src,len) memcpy(dst,src,len) #endif /** * LWIP_MPU_COMPATIBLE: enables special memory management mechanism * which makes lwip able to work on MPU (Memory Protection Unit) system * by not passing stack-pointers to other threads * (this decreases performance) */ #ifndef LWIP_MPU_COMPATIBLE #define LWIP_MPU_COMPATIBLE 0 #endif /* ------------------------------------ ---------- Memory options ---------- ------------------------------------ */ /** * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library * instead of the lwip internal allocator. Can save code size if you * already use it. */ #ifndef MEM_LIBC_MALLOC #define MEM_LIBC_MALLOC 0 #endif /** * MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator. * Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution * speed and usage from interrupts! */ #ifndef MEMP_MEM_MALLOC #define MEMP_MEM_MALLOC 0 #endif /** * MEM_ALIGNMENT: should be set to the alignment of the CPU * 4 byte alignment -> #define MEM_ALIGNMENT 4 * 2 byte alignment -> #define MEM_ALIGNMENT 2 */ #ifndef MEM_ALIGNMENT #define MEM_ALIGNMENT 1 #endif /** * MEM_SIZE: the size of the heap memory. If the application will send * a lot of data that needs to be copied, this should be set high. */ #ifndef MEM_SIZE #define MEM_SIZE 1600 #endif /** * MEMP_OVERFLOW_CHECK: memp overflow protection reserves a configurable * amount of bytes before and after each memp element in every pool and fills * it with a prominent default value. * MEMP_OVERFLOW_CHECK == 0 no checking * MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed * MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time * memp_malloc() or memp_free() is called (useful but slow!) */ #ifndef MEMP_OVERFLOW_CHECK #define MEMP_OVERFLOW_CHECK 0 #endif /** * MEMP_SANITY_CHECK==1: run a sanity check after each memp_free() to make * sure that there are no cycles in the linked lists. */ #ifndef MEMP_SANITY_CHECK #define MEMP_SANITY_CHECK 0 #endif /** * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set * of memory pools of various sizes. When mem_malloc is called, an element of * the smallest pool that can provide the length needed is returned. * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled. */ #ifndef MEM_USE_POOLS #define MEM_USE_POOLS 0 #endif /** * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more * reliable. */ #ifndef MEM_USE_POOLS_TRY_BIGGER_POOL #define MEM_USE_POOLS_TRY_BIGGER_POOL 0 #endif /** * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h * that defines additional pools beyond the "standard" ones required * by lwIP. If you set this to 1, you must have lwippools.h in your * include path somewhere. */ #ifndef MEMP_USE_CUSTOM_POOLS #define MEMP_USE_CUSTOM_POOLS 0 #endif /** * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from * interrupt context (or another context that doesn't allow waiting for a * semaphore). * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT, * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs * with each loop so that mem_free can run. * * ATTENTION: As you can see from the above description, this leads to dis-/ * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc * can need longer. * * If you don't want that, at least for NO_SYS=0, you can still use the following * functions to enqueue a deallocation call which then runs in the tcpip_thread * context: * - pbuf_free_callback(p); * - mem_free_callback(m); */ #ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT #define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0 #endif /* ------------------------------------------------ ---------- Internal Memory Pool Sizes ---------- ------------------------------------------------ */ /** * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF). * If the application sends a lot of data out of ROM (or other static memory), * this should be set high. */ #ifndef MEMP_NUM_PBUF #define MEMP_NUM_PBUF 16 #endif /** * MEMP_NUM_RAW_PCB: Number of raw connection PCBs * (requires the LWIP_RAW option) */ #ifndef MEMP_NUM_RAW_PCB #define MEMP_NUM_RAW_PCB 4 #endif /** * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One * per active UDP "connection". * (requires the LWIP_UDP option) */ #ifndef MEMP_NUM_UDP_PCB #define MEMP_NUM_UDP_PCB 4 #endif /** * MEMP_NUM_TCP_PCB: the number of simultaneously active TCP connections. * (requires the LWIP_TCP option) */ #ifndef MEMP_NUM_TCP_PCB #define MEMP_NUM_TCP_PCB 5 #endif /** * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. * (requires the LWIP_TCP option) */ #ifndef MEMP_NUM_TCP_PCB_LISTEN #define MEMP_NUM_TCP_PCB_LISTEN 8 #endif /** * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. * (requires the LWIP_TCP option) */ #ifndef MEMP_NUM_TCP_SEG #define MEMP_NUM_TCP_SEG 16 #endif /** * MEMP_NUM_REASSDATA: the number of IP packets simultaneously queued for * reassembly (whole packets, not fragments!) */ #ifndef MEMP_NUM_REASSDATA #define MEMP_NUM_REASSDATA 5 #endif /** * MEMP_NUM_FRAG_PBUF: the number of IP fragments simultaneously sent * (fragments, not whole packets!). * This is only used with IP_FRAG_USES_STATIC_BUF==0 and * LWIP_NETIF_TX_SINGLE_PBUF==0 and only has to be > 1 with DMA-enabled MACs * where the packet is not yet sent when netif->output returns. */ #ifndef MEMP_NUM_FRAG_PBUF #define MEMP_NUM_FRAG_PBUF 15 #endif /** * MEMP_NUM_ARP_QUEUE: the number of simultaneously queued outgoing * packets (pbufs) that are waiting for an ARP request (to resolve * their destination address) to finish. * (requires the ARP_QUEUEING option) */ #ifndef MEMP_NUM_ARP_QUEUE #define MEMP_NUM_ARP_QUEUE 30 #endif /** * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces * can be members at the same time (one per netif - allsystems group -, plus one * per netif membership). * (requires the LWIP_IGMP option) */ #ifndef MEMP_NUM_IGMP_GROUP #define MEMP_NUM_IGMP_GROUP 8 #endif /** * MEMP_NUM_SYS_TIMEOUT: the number of simultaneously active timeouts. * The default number of timeouts is calculated here for all enabled modules. * The formula expects settings to be either '0' or '1'. */ #ifndef MEMP_NUM_SYS_TIMEOUT #define MEMP_NUM_SYS_TIMEOUT (LWIP_TCP + IP_REASSEMBLY + LWIP_ARP + (2*LWIP_DHCP) + LWIP_AUTOIP + LWIP_IGMP + LWIP_DNS + (PPP_SUPPORT*6*MEMP_NUM_PPP_PCB) + (LWIP_IPV6 ? (1 + LWIP_IPV6_REASS + LWIP_IPV6_MLD) : 0)) #endif /** * MEMP_NUM_NETBUF: the number of struct netbufs. * (only needed if you use the sequential API, like api_lib.c) */ #ifndef MEMP_NUM_NETBUF #define MEMP_NUM_NETBUF 2 #endif /** * MEMP_NUM_NETCONN: the number of struct netconns. * (only needed if you use the sequential API, like api_lib.c) */ #ifndef MEMP_NUM_NETCONN #define MEMP_NUM_NETCONN 4 #endif /** * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used * for callback/timeout API communication. * (only needed if you use tcpip.c) */ #ifndef MEMP_NUM_TCPIP_MSG_API #define MEMP_NUM_TCPIP_MSG_API 8 #endif /** * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used * for incoming packets. * (only needed if you use tcpip.c) */ #ifndef MEMP_NUM_TCPIP_MSG_INPKT #define MEMP_NUM_TCPIP_MSG_INPKT 8 #endif /** * MEMP_NUM_NETDB: the number of concurrently running lwip_addrinfo() calls * (before freeing the corresponding memory using lwip_freeaddrinfo()). */ #ifndef MEMP_NUM_NETDB #define MEMP_NUM_NETDB 1 #endif /** * MEMP_NUM_LOCALHOSTLIST: the number of host entries in the local host list * if DNS_LOCAL_HOSTLIST_IS_DYNAMIC==1. */ #ifndef MEMP_NUM_LOCALHOSTLIST #define MEMP_NUM_LOCALHOSTLIST 1 #endif /** * MEMP_NUM_PPP_PCB: the number of simultaneously active PPP * connections (requires the PPP_SUPPORT option) */ #ifndef MEMP_NUM_PPP_PCB #define MEMP_NUM_PPP_PCB 1 #endif /** * MEMP_NUM_PPPOS_INTERFACES: the number of concurrently active PPPoS * interfaces (only used with PPPOS_SUPPORT==1) */ #ifndef MEMP_NUM_PPPOS_INTERFACES #define MEMP_NUM_PPPOS_INTERFACES MEMP_NUM_PPP_PCB #endif /** * MEMP_NUM_PPPOE_INTERFACES: the number of concurrently active PPPoE * interfaces (only used with PPPOE_SUPPORT==1) */ #ifndef MEMP_NUM_PPPOE_INTERFACES #define MEMP_NUM_PPPOE_INTERFACES 1 #endif /** * MEMP_NUM_PPPOL2TP_INTERFACES: the number of concurrently active PPPoL2TP * interfaces (only used with PPPOL2TP_SUPPORT==1) */ #ifndef MEMP_NUM_PPPOL2TP_INTERFACES #define MEMP_NUM_PPPOL2TP_INTERFACES 1 #endif /** * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */ #ifndef PBUF_POOL_SIZE #define PBUF_POOL_SIZE 16 #endif /** MEMP_NUM_API_MSG: the number of concurrently active calls to various * socket, netconn, and tcpip functions */ #ifndef MEMP_NUM_API_MSG #define MEMP_NUM_API_MSG MEMP_NUM_TCPIP_MSG_API #endif /** MEMP_NUM_DNS_API_MSG: the number of concurrently active calls to netconn_gethostbyname */ #ifndef MEMP_NUM_DNS_API_MSG #define MEMP_NUM_DNS_API_MSG MEMP_NUM_TCPIP_MSG_API #endif /** MEMP_NUM_SOCKET_SETGETSOCKOPT_DATA: the number of concurrently active calls * to getsockopt/setsockopt */ #ifndef MEMP_NUM_SOCKET_SETGETSOCKOPT_DATA #define MEMP_NUM_SOCKET_SETGETSOCKOPT_DATA MEMP_NUM_TCPIP_MSG_API #endif /** MEMP_NUM_NETIFAPI_MSG: the number of concurrently active calls to the * netifapi functions */ #ifndef MEMP_NUM_NETIFAPI_MSG #define MEMP_NUM_NETIFAPI_MSG MEMP_NUM_TCPIP_MSG_API #endif /* --------------------------------- ---------- ARP options ---------- --------------------------------- */ /** * LWIP_ARP==1: Enable ARP functionality. */ #ifndef LWIP_ARP #define LWIP_ARP 1 #endif /** * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached. */ #ifndef ARP_TABLE_SIZE #define ARP_TABLE_SIZE 10 #endif /** the time an ARP entry stays valid after its last update, * for ARP_TMR_INTERVAL = 1000, this is * (60 * 5) seconds = 5 minutes. */ #ifndef ARP_MAXAGE #define ARP_MAXAGE 300 #endif /** * ARP_QUEUEING==1: Multiple outgoing packets are queued during hardware address * resolution. By default, only the most recent packet is queued per IP address. * This is sufficient for most protocols and mainly reduces TCP connection * startup time. Set this to 1 if you know your application sends more than one * packet in a row to an IP address that is not in the ARP cache. */ #ifndef ARP_QUEUEING #define ARP_QUEUEING 0 #endif /** The maximum number of packets which may be queued for each * unresolved address by other network layers. Defaults to 3, 0 means disabled. * Old packets are dropped, new packets are queued. */ #ifndef ARP_QUEUE_LEN #define ARP_QUEUE_LEN 3 #endif /** * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be * updated with the source MAC and IP addresses supplied in the packet. * You may want to disable this if you do not trust LAN peers to have the * correct addresses, or as a limited approach to attempt to handle * spoofing. If disabled, lwIP will need to make a new ARP request if * the peer is not already in the ARP table, adding a little latency. * The peer *is* in the ARP table if it requested our address before. * Also notice that this slows down input processing of every IP packet! */ #ifndef ETHARP_TRUST_IP_MAC #define ETHARP_TRUST_IP_MAC 0 #endif /** * ETHARP_SUPPORT_VLAN==1: support receiving and sending ethernet packets with * VLAN header. See the description of LWIP_HOOK_VLAN_CHECK and * LWIP_HOOK_VLAN_SET hooks to check/set VLAN headers. * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check. * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted. * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted. * Alternatively, define a function/define ETHARP_VLAN_CHECK_FN(eth_hdr, vlan) * that returns 1 to accept a packet or 0 to drop a packet. */ #ifndef ETHARP_SUPPORT_VLAN #define ETHARP_SUPPORT_VLAN 0 #endif /** LWIP_ETHERNET==1: enable ethernet support for PPPoE even though ARP * might be disabled */ #ifndef LWIP_ETHERNET #define LWIP_ETHERNET (LWIP_ARP || PPPOE_SUPPORT) #endif /** ETH_PAD_SIZE: number of bytes added before the ethernet header to ensure * alignment of payload after that header. Since the header is 14 bytes long, * without this padding e.g. addresses in the IP header will not be aligned * on a 32-bit boundary, so setting this to 2 can speed up 32-bit-platforms. */ #ifndef ETH_PAD_SIZE #define ETH_PAD_SIZE 0 #endif /** ETHARP_SUPPORT_STATIC_ENTRIES==1: enable code to support static ARP table * entries (using etharp_add_static_entry/etharp_remove_static_entry). */ #ifndef ETHARP_SUPPORT_STATIC_ENTRIES #define ETHARP_SUPPORT_STATIC_ENTRIES 0 #endif /** ETHARP_TABLE_MATCH_NETIF==1: Match netif for ARP table entries. * If disabled, duplicate IP address on multiple netifs are not supported * (but this should only occur for AutoIP). */ #ifndef ETHARP_TABLE_MATCH_NETIF #define ETHARP_TABLE_MATCH_NETIF 0 #endif /* -------------------------------- ---------- IP options ---------- -------------------------------- */ /** * LWIP_IPV4==1: Enable IPv4 */ #ifndef LWIP_IPV4 #define LWIP_IPV4 1 #endif /** * IP_FORWARD==1: Enables the ability to forward IP packets across network * interfaces. If you are going to run lwIP on a device with only one network * interface, define this to 0. */ #ifndef IP_FORWARD #define IP_FORWARD 0 #endif /** * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that * this option does not affect outgoing packet sizes, which can be controlled * via IP_FRAG. */ #ifndef IP_REASSEMBLY #define IP_REASSEMBLY 1 #endif /** * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note * that this option does not affect incoming packet sizes, which can be * controlled via IP_REASSEMBLY. */ #ifndef IP_FRAG #define IP_FRAG 1 #endif #if !LWIP_IPV4 /* disable IPv4 extensions when IPv4 is disabled */ #undef IP_FORWARD #define IP_FORWARD 0 #undef IP_REASSEMBLY #define IP_REASSEMBLY 0 #undef IP_FRAG #define IP_FRAG 0 #endif /* !LWIP_IPV4 */ /** * IP_OPTIONS_ALLOWED: Defines the behavior for IP options. * IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped. * IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed). */ #ifndef IP_OPTIONS_ALLOWED #define IP_OPTIONS_ALLOWED 1 #endif /** * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally) * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived * in this time, the whole packet is discarded. */ #ifndef IP_REASS_MAXAGE #define IP_REASS_MAXAGE 3 #endif /** * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled. * Since the received pbufs are enqueued, be sure to configure * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive * packets even if the maximum amount of fragments is enqueued for reassembly! */ #ifndef IP_REASS_MAX_PBUFS #define IP_REASS_MAX_PBUFS 10 #endif /** * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP * fragmentation. Otherwise pbufs are allocated and reference the original * packet data to be fragmented (or with LWIP_NETIF_TX_SINGLE_PBUF==1, * new PBUF_RAM pbufs are used for fragments). * ATTENTION: IP_FRAG_USES_STATIC_BUF==1 may not be used for DMA-enabled MACs! */ #ifndef IP_FRAG_USES_STATIC_BUF #define IP_FRAG_USES_STATIC_BUF 0 #endif /** * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer * (requires IP_FRAG_USES_STATIC_BUF==1) */ #if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU) #define IP_FRAG_MAX_MTU 1500 #endif /** * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers. */ #ifndef IP_DEFAULT_TTL #define IP_DEFAULT_TTL 255 #endif /** * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast * filter per pcb on udp and raw send operations. To enable broadcast filter * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1. */ #ifndef IP_SOF_BROADCAST #define IP_SOF_BROADCAST 0 #endif /** * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast * filter on recv operations. */ #ifndef IP_SOF_BROADCAST_RECV #define IP_SOF_BROADCAST_RECV 0 #endif /** * IP_FORWARD_ALLOW_TX_ON_RX_NETIF==1: allow ip_forward() to send packets back * out on the netif where it was received. This should only be used for * wireless networks. * ATTENTION: When this is 1, make sure your netif driver correctly marks incoming * link-layer-broadcast/multicast packets as such using the corresponding pbuf flags! */ #ifndef IP_FORWARD_ALLOW_TX_ON_RX_NETIF #define IP_FORWARD_ALLOW_TX_ON_RX_NETIF 0 #endif /** * LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS==1: randomize the local port for the first * local TCP/UDP pcb (default==0). This can prevent creating predictable port * numbers after booting a device. */ #ifndef LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS #define LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS 0 #endif /* ---------------------------------- ---------- ICMP options ---------- ---------------------------------- */ /** * LWIP_ICMP==1: Enable ICMP module inside the IP stack. * Be careful, disable that make your product non-compliant to RFC1122 */ #ifndef LWIP_ICMP #define LWIP_ICMP 1 #endif /** * ICMP_TTL: Default value for Time-To-Live used by ICMP packets. */ #ifndef ICMP_TTL #define ICMP_TTL (IP_DEFAULT_TTL) #endif /** * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only) */ #ifndef LWIP_BROADCAST_PING #define LWIP_BROADCAST_PING 0 #endif /** * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only) */ #ifndef LWIP_MULTICAST_PING #define LWIP_MULTICAST_PING 0 #endif /* --------------------------------- ---------- RAW options ---------- --------------------------------- */ /** * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. */ #ifndef LWIP_RAW #define LWIP_RAW 0 #endif /** * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. */ #ifndef RAW_TTL #define RAW_TTL (IP_DEFAULT_TTL) #endif /* ---------------------------------- ---------- DHCP options ---------- ---------------------------------- */ /** * LWIP_DHCP==1: Enable DHCP module. */ #ifndef LWIP_DHCP #define LWIP_DHCP 0 #endif #if !LWIP_IPV4 /* disable DHCP when IPv4 is disabled */ #undef LWIP_DHCP #define LWIP_DHCP 0 #endif /* !LWIP_IPV4 */ /** * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address. */ #ifndef DHCP_DOES_ARP_CHECK #define DHCP_DOES_ARP_CHECK ((LWIP_DHCP) && (LWIP_ARP)) #endif /** * LWIP_DHCP_CHECK_LINK_UP==1: dhcp_start() only really starts if the netif has * NETIF_FLAG_LINK_UP set in its flags. As this is only an optimization and * netif drivers might not set this flag, the default is off. If enabled, * netif_set_link_up() must be called to continue dhcp starting. */ #ifndef LWIP_DHCP_CHECK_LINK_UP #define LWIP_DHCP_CHECK_LINK_UP 0 #endif /** * LWIP_DHCP_BOOTP_FILE==1: Store offered_si_addr and boot_file_name. */ #ifndef LWIP_DHCP_BOOTP_FILE #define LWIP_DHCP_BOOTP_FILE 0 #endif /** * LWIP_DHCP_GETS_NTP==1: Request NTP servers with discover/select. For each * response packet, an callback is called, which has to be provided by the port: * void dhcp_set_ntp_servers(u8_t num_ntp_servers, ip_addr_t* ntp_server_addrs); */ #ifndef LWIP_DHCP_GET_NTP_SRV #define LWIP_DHCP_GET_NTP_SRV 0 #endif /** * The maximum of NTP servers requested */ #ifndef LWIP_DHCP_MAX_NTP_SERVERS #define LWIP_DHCP_MAX_NTP_SERVERS 1 #endif /* ------------------------------------ ---------- AUTOIP options ---------- ------------------------------------ */ /** * LWIP_AUTOIP==1: Enable AUTOIP module. */ #ifndef LWIP_AUTOIP #define LWIP_AUTOIP 0 #endif #if !LWIP_IPV4 /* disable AUTOIP when IPv4 is disabled */ #undef LWIP_AUTOIP #define LWIP_AUTOIP 0 #endif /* !LWIP_IPV4 */ /** * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on * the same interface at the same time. */ #ifndef LWIP_DHCP_AUTOIP_COOP #define LWIP_DHCP_AUTOIP_COOP 0 #endif /** * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes * that should be sent before falling back on AUTOIP. This can be set * as low as 1 to get an AutoIP address very quickly, but you should * be prepared to handle a changing IP address when DHCP overrides * AutoIP. */ #ifndef LWIP_DHCP_AUTOIP_COOP_TRIES #define LWIP_DHCP_AUTOIP_COOP_TRIES 9 #endif /* ---------------------------------- ----- SNMP MIB2 support ----- ---------------------------------- */ /** * LWIP_MIB2_CALLBACKS==1: Turn on SNMP MIB2 callbacks. * Turn this on to get callbacks needed to implement MIB2. * Usually MIB2_STATS should be enabled, too. */ #ifndef LWIP_MIB2_CALLBACKS #define LWIP_MIB2_CALLBACKS 0 #endif /* ---------------------------------- ----- Multicast/IGMP options ----- ---------------------------------- */ /** * LWIP_IGMP==1: Turn on IGMP module. */ #ifndef LWIP_IGMP #define LWIP_IGMP 1 #endif #if !LWIP_IPV4 #undef LWIP_IGMP #define LWIP_IGMP 0 #endif /** * LWIP_MULTICAST_TX_OPTIONS==1: Enable multicast TX support like the socket options * IP_MULTICAST_TTL/IP_MULTICAST_IF/IP_MULTICAST_LOOP */ #ifndef LWIP_MULTICAST_TX_OPTIONS #define LWIP_MULTICAST_TX_OPTIONS LWIP_IGMP #endif /* ---------------------------------- ---------- DNS options ----------- ---------------------------------- */ /** * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS * transport. */ #ifndef LWIP_DNS #define LWIP_DNS 0 #endif /** DNS maximum number of entries to maintain locally. */ #ifndef DNS_TABLE_SIZE #define DNS_TABLE_SIZE 4 #endif /** DNS maximum host name length supported in the name table. */ #ifndef DNS_MAX_NAME_LENGTH #define DNS_MAX_NAME_LENGTH 256 #endif /** The maximum of DNS servers * The first server can be initialized automatically by defining * DNS_SERVER_ADDRESS(ipaddr), where 'ipaddr' is an 'ip_addr_t*' */ #ifndef DNS_MAX_SERVERS #define DNS_MAX_SERVERS 2 #endif /** DNS do a name checking between the query and the response. */ #ifndef DNS_DOES_NAME_CHECK #define DNS_DOES_NAME_CHECK 1 #endif /** LWIP_DNS_SECURE: controls the security level of the DNS implementation * Use all DNS security features by default. * This is overridable but should only be needed by very small targets * or when using against non standard DNS servers. */ #ifndef LWIP_DNS_SECURE #define LWIP_DNS_SECURE (LWIP_DNS_SECURE_RAND_XID | LWIP_DNS_SECURE_NO_MULTIPLE_OUTSTANDING | LWIP_DNS_SECURE_RAND_SRC_PORT) #endif /* A list of DNS security features follows */ #define LWIP_DNS_SECURE_RAND_XID 1 #define LWIP_DNS_SECURE_NO_MULTIPLE_OUTSTANDING 2 #define LWIP_DNS_SECURE_RAND_SRC_PORT 4 /** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled, * you have to define * #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}} * (an array of structs name/address, where address is an u32_t in network * byte order). * * Instead, you can also use an external function: * #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name) * that returns the IP address or INADDR_NONE if not found. */ #ifndef DNS_LOCAL_HOSTLIST #define DNS_LOCAL_HOSTLIST 0 #endif /* DNS_LOCAL_HOSTLIST */ /** If this is turned on, the local host-list can be dynamically changed * at runtime. */ #ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC #define DNS_LOCAL_HOSTLIST_IS_DYNAMIC 0 #endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */ /* --------------------------------- ---------- UDP options ---------- --------------------------------- */ /** * LWIP_UDP==1: Turn on UDP. */ #ifndef LWIP_UDP #define LWIP_UDP 1 #endif /** * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP) */ #ifndef LWIP_UDPLITE #define LWIP_UDPLITE 0 #endif /** * UDP_TTL: Default Time-To-Live value. */ #ifndef UDP_TTL #define UDP_TTL (IP_DEFAULT_TTL) #endif /** * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf. */ #ifndef LWIP_NETBUF_RECVINFO #define LWIP_NETBUF_RECVINFO 0 #endif /* --------------------------------- ---------- TCP options ---------- --------------------------------- */ /** * LWIP_TCP==1: Turn on TCP. */ #ifndef LWIP_TCP #define LWIP_TCP 1 #endif /** * TCP_TTL: Default Time-To-Live value. */ #ifndef TCP_TTL #define TCP_TTL (IP_DEFAULT_TTL) #endif /** * TCP_WND: The size of a TCP window. This must be at least * (2 * TCP_MSS) for things to work well */ #ifndef TCP_WND #define TCP_WND(pcb) (4 * TCP_MSS) #endif /** * TCP_MAXRTX: Maximum number of retransmissions of data segments. */ #ifndef TCP_MAXRTX #define TCP_MAXRTX 12 #endif /** * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments. */ #ifndef TCP_SYNMAXRTX #define TCP_SYNMAXRTX 6 #endif /** * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order. * Define to 0 if your device is low on memory. */ #ifndef TCP_QUEUE_OOSEQ #define TCP_QUEUE_OOSEQ (LWIP_TCP) #endif /** * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default, * you might want to increase this.) * For the receive side, this MSS is advertised to the remote side * when opening a connection. For the transmit size, this MSS sets * an upper limit on the MSS advertised by the remote host. */ #ifndef TCP_MSS #define TCP_MSS 536 #endif /** * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which * reflects the available reassembly buffer size at the remote host) and the * largest size permitted by the IP layer" (RFC 1122) * Setting this to 1 enables code that checks TCP_MSS against the MTU of the * netif used for a connection and limits the MSS if it would be too big otherwise. */ #ifndef TCP_CALCULATE_EFF_SEND_MSS #define TCP_CALCULATE_EFF_SEND_MSS 1 #endif /** * TCP_SND_BUF: TCP sender buffer space (bytes). * To achieve good performance, this should be at least 2 * TCP_MSS. */ #ifndef TCP_SND_BUF #define TCP_SND_BUF(pcb) (2 * TCP_MSS) #endif /** * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work. */ #ifndef TCP_SND_QUEUELEN #define TCP_SND_QUEUELEN(pcb) ((4 * (TCP_SND_BUF((pcb))) + (TCP_MSS - 1))/(TCP_MSS)) #endif /** * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than * TCP_SND_BUF. It is the amount of space which must be available in the * TCP snd_buf for select to return writable (combined with TCP_SNDQUEUELOWAT). */ #ifndef TCP_SNDLOWAT #define TCP_SNDLOWAT(pcb) LWIP_MIN(LWIP_MAX(((TCP_SND_BUF((pcb)))/2), (2 * TCP_MSS) + 1), (TCP_SND_BUF((pcb))) - 1) #endif /** * TCP_SNDQUEUELOWAT: TCP writable bufs (pbuf count). This must be less * than TCP_SND_QUEUELEN. If the number of pbufs queued on a pcb drops below * this number, select returns writable (combined with TCP_SNDLOWAT). */ #ifndef TCP_SNDQUEUELOWAT #define TCP_SNDQUEUELOWAT(pcb) LWIP_MAX(((TCP_SND_QUEUELEN((pcb)))/2), 5) #endif /** * TCP_OOSEQ_MAX_BYTES: The maximum number of bytes queued on ooseq per pcb. * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0. */ #ifndef TCP_OOSEQ_MAX_BYTES #define TCP_OOSEQ_MAX_BYTES 0 #endif /** * TCP_OOSEQ_MAX_PBUFS: The maximum number of pbufs queued on ooseq per pcb. * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0. */ #ifndef TCP_OOSEQ_MAX_PBUFS #define TCP_OOSEQ_MAX_PBUFS 0 #endif /** * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb. */ #ifndef TCP_LISTEN_BACKLOG #define TCP_LISTEN_BACKLOG 0 #endif /** * The maximum allowed backlog for TCP listen netconns. * This backlog is used unless another is explicitly specified. * 0xff is the maximum (u8_t). */ #ifndef TCP_DEFAULT_LISTEN_BACKLOG #define TCP_DEFAULT_LISTEN_BACKLOG 0xff #endif /** * TCP_OVERSIZE: The maximum number of bytes that tcp_write may * allocate ahead of time in an attempt to create shorter pbuf chains * for transmission. The meaningful range is 0 to TCP_MSS. Some * suggested values are: * * 0: Disable oversized allocation. Each tcp_write() allocates a new pbuf (old behaviour). * 1: Allocate size-aligned pbufs with minimal excess. Use this if your * scatter-gather DMA requires aligned fragments. * 128: Limit the pbuf/memory overhead to 20%. * TCP_MSS: Try to create unfragmented TCP packets. * TCP_MSS/4: Try to create 4 fragments or less per TCP packet. */ #ifndef TCP_OVERSIZE #define TCP_OVERSIZE TCP_MSS #endif /** * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option. * The timestamp option is currently only used to help remote hosts, it is not * really used locally. Therefore, it is only enabled when a TS option is * received in the initial SYN packet from a remote host. */ #ifndef LWIP_TCP_TIMESTAMPS #define LWIP_TCP_TIMESTAMPS 0 #endif /** * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an * explicit window update */ #ifndef TCP_WND_UPDATE_THRESHOLD #define TCP_WND_UPDATE_THRESHOLD(pcb) LWIP_MIN((TCP_WND((pcb)) / 4), (TCP_MSS * 4)) #endif /** * LWIP_EVENT_API and LWIP_CALLBACK_API: Only one of these should be set to 1. * LWIP_EVENT_API==1: The user defines lwip_tcp_event() to receive all * events (accept, sent, etc) that happen in the system. * LWIP_CALLBACK_API==1: The PCB callback function is called directly * for the event. This is the default. */ #if !defined(LWIP_EVENT_API) && !defined(LWIP_CALLBACK_API) #define LWIP_EVENT_API 0 #define LWIP_CALLBACK_API 1 #endif /** * LWIP_WND_SCALE and TCP_RCV_SCALE: * Set LWIP_WND_SCALE to 1 to enable window scaling. * Set TCP_RCV_SCALE to the desired scaling factor (shift count in the * range of [0..14]). * When LWIP_WND_SCALE is enabled but TCP_RCV_SCALE is 0, we can use a large * send window while having a small receive window only. */ #ifndef LWIP_WND_SCALE #define LWIP_WND_SCALE 0 #define TCP_RCV_SCALE 0 #endif /* ---------------------------------- ---------- Pbuf options ---------- ---------------------------------- */ /** * PBUF_LINK_HLEN: the number of bytes that should be allocated for a * link level header. The default is 14, the standard value for * Ethernet. */ #ifndef PBUF_LINK_HLEN #ifdef LWIP_HOOK_VLAN_SET #define PBUF_LINK_HLEN (18 + ETH_PAD_SIZE) #else /* LWIP_HOOK_VLAN_SET */ #define PBUF_LINK_HLEN (14 + ETH_PAD_SIZE) #endif /* LWIP_HOOK_VLAN_SET */ #endif /** * PBUF_LINK_ENCAPSULATION_HLEN: the number of bytes that should be allocated * for an additional encapsulation header before ethernet headers (e.g. 802.11) */ #ifndef PBUF_LINK_ENCAPSULATION_HLEN #define PBUF_LINK_ENCAPSULATION_HLEN 0 #endif /** * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is * designed to accommodate single full size TCP frame in one pbuf, including * TCP_MSS, IP header, and link header. */ #ifndef PBUF_POOL_BUFSIZE #define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN) #endif /* ------------------------------------------------ ---------- Network Interfaces options ---------- ------------------------------------------------ */ /** * LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname * field. */ #ifndef LWIP_NETIF_HOSTNAME #define LWIP_NETIF_HOSTNAME 0 #endif /** * LWIP_NETIF_API==1: Support netif api (in netifapi.c) */ #ifndef LWIP_NETIF_API #define LWIP_NETIF_API 0 #endif /** * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface * changes its up/down status (i.e., due to DHCP IP acquisition) */ #ifndef LWIP_NETIF_STATUS_CALLBACK #define LWIP_NETIF_STATUS_CALLBACK 0 #endif /** * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface * whenever the link changes (i.e., link down) */ #ifndef LWIP_NETIF_LINK_CALLBACK #define LWIP_NETIF_LINK_CALLBACK 0 #endif /** * LWIP_NETIF_REMOVE_CALLBACK==1: Support a callback function that is called * when a netif has been removed */ #ifndef LWIP_NETIF_REMOVE_CALLBACK #define LWIP_NETIF_REMOVE_CALLBACK 0 #endif /** * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table * indices) in struct netif. TCP and UDP can make use of this to prevent * scanning the ARP table for every sent packet. While this is faster for big * ARP tables or many concurrent connections, it might be counterproductive * if you have a tiny ARP table or if there never are concurrent connections. */ #ifndef LWIP_NETIF_HWADDRHINT #define LWIP_NETIF_HWADDRHINT 0 #endif /** * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP * address equal to the netif IP address, looping them back up the stack. */ #ifndef LWIP_NETIF_LOOPBACK #define LWIP_NETIF_LOOPBACK 0 #endif /** * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback * sending for each netif (0 = disabled) */ #ifndef LWIP_LOOPBACK_MAX_PBUFS #define LWIP_LOOPBACK_MAX_PBUFS 0 #endif /** * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in * the system, as netifs must change how they behave depending on this setting * for the LWIP_NETIF_LOOPBACK option to work. * Setting this is needed to avoid reentering non-reentrant functions like * tcp_input(). * LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a * multithreaded environment like tcpip.c. In this case, netif->input() * is called directly. * LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup. * The packets are put on a list and netif_poll() must be called in * the main application loop. */ #ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING #define LWIP_NETIF_LOOPBACK_MULTITHREADING (!NO_SYS) #endif /** * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data * to be sent into one single pbuf. This is for compatibility with DMA-enabled * MACs that do not support scatter-gather. * Beware that this might involve CPU-memcpy before transmitting that would not * be needed without this flag! Use this only if you need to! * * @todo: TCP and IP-frag do not work with this, yet: */ #ifndef LWIP_NETIF_TX_SINGLE_PBUF #define LWIP_NETIF_TX_SINGLE_PBUF 0 #endif /* LWIP_NETIF_TX_SINGLE_PBUF */ /* ------------------------------------ ---------- LOOPIF options ---------- ------------------------------------ */ /** * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1). * This is only needed when no real netifs are available. If at least one other * netif is available, loopback traffic uses this netif. */ #ifndef LWIP_HAVE_LOOPIF #define LWIP_HAVE_LOOPIF LWIP_NETIF_LOOPBACK #endif /** * LWIP_LOOPIF_MULTICAST==1: Support multicast/IGMP on loop interface (127.0.0.1). */ #ifndef LWIP_LOOPIF_MULTICAST #define LWIP_LOOPIF_MULTICAST 0 #endif /* ------------------------------------ ---------- SLIPIF options ---------- ------------------------------------ */ /** * LWIP_HAVE_SLIPIF==1: Support slip interface and slipif.c */ #ifndef LWIP_HAVE_SLIPIF #define LWIP_HAVE_SLIPIF 0 #endif /* ------------------------------------ ---------- Thread options ---------- ------------------------------------ */ /** * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread. */ #ifndef TCPIP_THREAD_NAME #define TCPIP_THREAD_NAME "tcpip_thread" #endif /** * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread. * The stack size value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #ifndef TCPIP_THREAD_STACKSIZE #define TCPIP_THREAD_STACKSIZE 0 #endif /** * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread. * The priority value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #ifndef TCPIP_THREAD_PRIO #define TCPIP_THREAD_PRIO 1 #endif /** * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages * The queue size value itself is platform-dependent, but is passed to * sys_mbox_new() when tcpip_init is called. */ #ifndef TCPIP_MBOX_SIZE #define TCPIP_MBOX_SIZE 0 #endif /** * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread. */ #ifndef SLIPIF_THREAD_NAME #define SLIPIF_THREAD_NAME "slipif_loop" #endif /** * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread. * The stack size value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #ifndef SLIPIF_THREAD_STACKSIZE #define SLIPIF_THREAD_STACKSIZE 0 #endif /** * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread. * The priority value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #ifndef SLIPIF_THREAD_PRIO #define SLIPIF_THREAD_PRIO 1 #endif /** * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread. */ #ifndef DEFAULT_THREAD_NAME #define DEFAULT_THREAD_NAME "lwIP" #endif /** * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread. * The stack size value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #ifndef DEFAULT_THREAD_STACKSIZE #define DEFAULT_THREAD_STACKSIZE 0 #endif /** * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread. * The priority value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #ifndef DEFAULT_THREAD_PRIO #define DEFAULT_THREAD_PRIO 1 #endif /** * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed * to sys_mbox_new() when the recvmbox is created. */ #ifndef DEFAULT_RAW_RECVMBOX_SIZE #define DEFAULT_RAW_RECVMBOX_SIZE 0 #endif /** * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed * to sys_mbox_new() when the recvmbox is created. */ #ifndef DEFAULT_UDP_RECVMBOX_SIZE #define DEFAULT_UDP_RECVMBOX_SIZE 0 #endif /** * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed * to sys_mbox_new() when the recvmbox is created. */ #ifndef DEFAULT_TCP_RECVMBOX_SIZE #define DEFAULT_TCP_RECVMBOX_SIZE 0 #endif /** * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections. * The queue size value itself is platform-dependent, but is passed to * sys_mbox_new() when the acceptmbox is created. */ #ifndef DEFAULT_ACCEPTMBOX_SIZE #define DEFAULT_ACCEPTMBOX_SIZE 0 #endif /* ---------------------------------------------- ---------- Sequential layer options ---------- ---------------------------------------------- */ /** * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!) * Don't use it if you're not an active lwIP project member */ #ifndef LWIP_TCPIP_CORE_LOCKING #define LWIP_TCPIP_CORE_LOCKING 0 #endif /** * LWIP_TCPIP_CORE_LOCKING_INPUT: (EXPERIMENTAL!) * Don't use it if you're not an active lwIP project member */ #ifndef LWIP_TCPIP_CORE_LOCKING_INPUT #define LWIP_TCPIP_CORE_LOCKING_INPUT 0 #endif /** * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c) */ #ifndef LWIP_NETCONN #define LWIP_NETCONN 1 #endif /** LWIP_TCPIP_TIMEOUT==1: Enable tcpip_timeout/tcpip_untimeout to create * timers running in tcpip_thread from another thread. */ #ifndef LWIP_TCPIP_TIMEOUT #define LWIP_TCPIP_TIMEOUT 0 #endif /** LWIP_NETCONN_SEM_PER_THREAD==1: Use one (thread-local) semaphore per * thread calling socket/netconn functions instead of allocating one * semaphore per netconn (and per select etc.) * ATTENTION: a thread-local semaphore for API calls is needed: * - LWIP_NETCONN_THREAD_SEM_GET() returning a sys_sem_t* * - LWIP_NETCONN_THREAD_SEM_ALLOC() creating the semaphore * - LWIP_NETCONN_THREAD_SEM_FREE() freeing the semaphore * The latter 2 can be invoked up by calling netconn_thread_init()/netconn_thread_cleanup(). * Ports may call these for threads created with sys_thread_new(). */ #ifndef LWIP_NETCONN_SEM_PER_THREAD #define LWIP_NETCONN_SEM_PER_THREAD 0 #endif /** LWIP_NETCONN_FULLDUPLEX==1: Enable code that allows reading from one thread, * writing from a 2nd thread and closing from a 3rd thread at the same time. * ATTENTION: This is currently really alpha! Some requirements: * - LWIP_NETCONN_SEM_PER_THREAD==1 is required to use one socket/netconn from * multiple threads at once * - sys_mbox_free() has to unblock receive tasks waiting on recvmbox/acceptmbox * and prevent a task pending on this during/after deletion */ #ifndef LWIP_NETCONN_FULLDUPLEX #define LWIP_NETCONN_FULLDUPLEX 0 #endif /* ------------------------------------ ---------- Socket options ---------- ------------------------------------ */ /** * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c) */ #ifndef LWIP_SOCKET #define LWIP_SOCKET 1 #endif /* LWIP_SOCKET_SET_ERRNO==1: Set errno when socket functions cannot complete * successfully, as required by POSIX. Default is POSIX-compliant. */ #ifndef LWIP_SOCKET_SET_ERRNO #define LWIP_SOCKET_SET_ERRNO 1 #endif /** * LWIP_COMPAT_SOCKETS==1: Enable BSD-style sockets functions names through defines. * LWIP_COMPAT_SOCKETS==2: Same as ==1 but correctly named functions are created. * While this helps code completion, it might conflict with existing libraries. * (only used if you use sockets.c) */ #ifndef LWIP_COMPAT_SOCKETS #define LWIP_COMPAT_SOCKETS 1 #endif /** * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names. * Disable this option if you use a POSIX operating system that uses the same * names (read, write & close). (only used if you use sockets.c) */ #ifndef LWIP_POSIX_SOCKETS_IO_NAMES #define LWIP_POSIX_SOCKETS_IO_NAMES 1 #endif /** * LWIP_SOCKET_OFFSET==n: Increases the file descriptor number created by LwIP with n. * This can be useful when there are multiple APIs which create file descriptors. * When they all start with a different offset and you won't make them overlap you can * re implement read/write/close/ioctl/fnctl to send the requested action to the right * library (sharing select will need more work though). */ #ifndef LWIP_SOCKET_OFFSET #define LWIP_SOCKET_OFFSET 0 #endif /** * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set * in seconds. (does not require sockets.c, and will affect tcp.c) */ #ifndef LWIP_TCP_KEEPALIVE #define LWIP_TCP_KEEPALIVE 0 #endif /** * LWIP_SO_SNDTIMEO==1: Enable send timeout for sockets/netconns and * SO_SNDTIMEO processing. */ #ifndef LWIP_SO_SNDTIMEO #define LWIP_SO_SNDTIMEO 0 #endif /** * LWIP_SO_RCVTIMEO==1: Enable receive timeout for sockets/netconns and * SO_RCVTIMEO processing. */ #ifndef LWIP_SO_RCVTIMEO #define LWIP_SO_RCVTIMEO 0 #endif /** * LWIP_SO_SNDRCVTIMEO_NONSTANDARD==1: SO_RCVTIMEO/SO_SNDTIMEO take an int * (milliseconds, much like winsock does) instead of a struct timeval (default). */ #ifndef LWIP_SO_SNDRCVTIMEO_NONSTANDARD #define LWIP_SO_SNDRCVTIMEO_NONSTANDARD 0 #endif /** * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing. */ #ifndef LWIP_SO_RCVBUF #define LWIP_SO_RCVBUF 0 #endif /** * LWIP_SO_LINGER==1: Enable SO_LINGER processing. */ #ifndef LWIP_SO_LINGER #define LWIP_SO_LINGER 0 #endif /** * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize. */ #ifndef RECV_BUFSIZE_DEFAULT #define RECV_BUFSIZE_DEFAULT INT_MAX #endif /** * By default, TCP socket/netconn close waits 20 seconds max to send the FIN */ #ifndef LWIP_TCP_CLOSE_TIMEOUT_MS_DEFAULT #define LWIP_TCP_CLOSE_TIMEOUT_MS_DEFAULT 20000 #endif /** * SO_REUSE==1: Enable SO_REUSEADDR option. */ #ifndef SO_REUSE #define SO_REUSE 0 #endif /** * SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets * to all local matches if SO_REUSEADDR is turned on. * WARNING: Adds a memcpy for every packet if passing to more than one pcb! */ #ifndef SO_REUSE_RXTOALL #define SO_REUSE_RXTOALL 0 #endif /** * LWIP_FIONREAD_LINUXMODE==0 (default): ioctl/FIONREAD returns the amount of * pending data in the network buffer. This is the way windows does it. It's * the default for lwIP since it is smaller. * LWIP_FIONREAD_LINUXMODE==1: ioctl/FIONREAD returns the size of the next * pending datagram in bytes. This is the way linux does it. This code is only * here for compatibility. */ #ifndef LWIP_FIONREAD_LINUXMODE #define LWIP_FIONREAD_LINUXMODE 0 #endif /* ---------------------------------------- ---------- Statistics options ---------- ---------------------------------------- */ /** * LWIP_STATS==1: Enable statistics collection in lwip_stats. */ #ifndef LWIP_STATS #define LWIP_STATS 1 #endif #if LWIP_STATS /** * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions. */ #ifndef LWIP_STATS_DISPLAY #define LWIP_STATS_DISPLAY 0 #endif /** * LINK_STATS==1: Enable link stats. */ #ifndef LINK_STATS #define LINK_STATS 1 #endif /** * ETHARP_STATS==1: Enable etharp stats. */ #ifndef ETHARP_STATS #define ETHARP_STATS (LWIP_ARP) #endif /** * IP_STATS==1: Enable IP stats. */ #ifndef IP_STATS #define IP_STATS 1 #endif /** * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is * on if using either frag or reass. */ #ifndef IPFRAG_STATS #define IPFRAG_STATS (IP_REASSEMBLY || IP_FRAG) #endif /** * ICMP_STATS==1: Enable ICMP stats. */ #ifndef ICMP_STATS #define ICMP_STATS 1 #endif /** * IGMP_STATS==1: Enable IGMP stats. */ #ifndef IGMP_STATS #define IGMP_STATS (LWIP_IGMP) #endif /** * UDP_STATS==1: Enable UDP stats. Default is on if * UDP enabled, otherwise off. */ #ifndef UDP_STATS #define UDP_STATS (LWIP_UDP) #endif /** * TCP_STATS==1: Enable TCP stats. Default is on if TCP * enabled, otherwise off. */ #ifndef TCP_STATS #define TCP_STATS (LWIP_TCP) #endif /** * MEM_STATS==1: Enable mem.c stats. */ #ifndef MEM_STATS #define MEM_STATS ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0)) #endif /** * MEMP_STATS==1: Enable memp.c pool stats. */ #ifndef MEMP_STATS #define MEMP_STATS (MEMP_MEM_MALLOC == 0) #endif /** * SYS_STATS==1: Enable system stats (sem and mbox counts, etc). */ #ifndef SYS_STATS #define SYS_STATS (NO_SYS == 0) #endif /** * IP6_STATS==1: Enable IPv6 stats. */ #ifndef IP6_STATS #define IP6_STATS (LWIP_IPV6) #endif /** * ICMP6_STATS==1: Enable ICMP for IPv6 stats. */ #ifndef ICMP6_STATS #define ICMP6_STATS (LWIP_IPV6 && LWIP_ICMP6) #endif /** * IP6_FRAG_STATS==1: Enable IPv6 fragmentation stats. */ #ifndef IP6_FRAG_STATS #define IP6_FRAG_STATS (LWIP_IPV6 && (LWIP_IPV6_FRAG || LWIP_IPV6_REASS)) #endif /** * MLD6_STATS==1: Enable MLD for IPv6 stats. */ #ifndef MLD6_STATS #define MLD6_STATS (LWIP_IPV6 && LWIP_IPV6_MLD) #endif /** * ND6_STATS==1: Enable Neighbor discovery for IPv6 stats. */ #ifndef ND6_STATS #define ND6_STATS (LWIP_IPV6) #endif /** * MIB2_STATS==1: Stats for SNMP MIB2. */ #ifndef MIB2_STATS #define MIB2_STATS 0 #endif #else #define LINK_STATS 0 #define ETHARP_STATS 0 #define IP_STATS 0 #define IPFRAG_STATS 0 #define ICMP_STATS 0 #define IGMP_STATS 0 #define UDP_STATS 0 #define TCP_STATS 0 #define MEM_STATS 0 #define MEMP_STATS 0 #define SYS_STATS 0 #define LWIP_STATS_DISPLAY 0 #define IP6_STATS 0 #define ICMP6_STATS 0 #define IP6_FRAG_STATS 0 #define MLD6_STATS 0 #define ND6_STATS 0 #define MIB2_STATS 0 #endif /* LWIP_STATS */ /* --------------------------------- ---------- PPP options ---------- --------------------------------- */ /** * PPP_SUPPORT==1: Enable PPP. */ #ifndef PPP_SUPPORT #define PPP_SUPPORT 0 #endif /** * PPPOE_SUPPORT==1: Enable PPP Over Ethernet */ #ifndef PPPOE_SUPPORT #define PPPOE_SUPPORT 0 #endif /** * PPPOL2TP_SUPPORT==1: Enable PPP Over L2TP */ #ifndef PPPOL2TP_SUPPORT #define PPPOL2TP_SUPPORT 0 #endif /** * PPPOL2TP_AUTH_SUPPORT==1: Enable PPP Over L2TP Auth (enable MD5 support) */ #ifndef PPPOL2TP_AUTH_SUPPORT #define PPPOL2TP_AUTH_SUPPORT PPPOL2TP_SUPPORT #endif /** * PPPOS_SUPPORT==1: Enable PPP Over Serial */ #ifndef PPPOS_SUPPORT #define PPPOS_SUPPORT PPP_SUPPORT #endif /** * LWIP_PPP_API==1: Enable PPP API (in pppapi.c) */ #ifndef LWIP_PPP_API #define LWIP_PPP_API (PPP_SUPPORT && (NO_SYS == 0)) #endif #if PPP_SUPPORT /** * PPP_INPROC_IRQ_SAFE==1 call pppos_input() using tcpip_callback(). * * Please read the "PPPoS input path" chapter in the PPP documentation about this option. */ #ifndef PPP_INPROC_IRQ_SAFE #define PPP_INPROC_IRQ_SAFE 0 #endif /** * PRINTPKT_SUPPORT==1: Enable PPP print packet support * * Mandatory for debugging, it displays exchanged packet content in debug trace. */ #ifndef PRINTPKT_SUPPORT #define PRINTPKT_SUPPORT 0 #endif /** * PPP_IPV4_SUPPORT==1: Enable PPP IPv4 support */ #ifndef PPP_IPV4_SUPPORT #define PPP_IPV4_SUPPORT (LWIP_IPV4) #endif /** * PPP_IPV6_SUPPORT==1: Enable PPP IPv6 support */ #ifndef PPP_IPV6_SUPPORT #define PPP_IPV6_SUPPORT (LWIP_IPV6) #endif /** * PPP_NOTIFY_PHASE==1: Support PPP notify phase support * * PPP notify phase support allows you to set a callback which is * called on change of the internal PPP state machine. * * This can be used for example to set a LED pattern depending on the * current phase of the PPP session. */ #ifndef PPP_NOTIFY_PHASE #define PPP_NOTIFY_PHASE 0 #endif /** * pbuf_type PPP is using for LCP, PAP, CHAP, EAP, CCP, IPCP and IP6CP packets. * * Memory allocated must be single buffered for PPP to works, it requires pbuf * that are not going to be chained when allocated. This requires setting * PBUF_POOL_BUFSIZE to at least 512 bytes, which is quite huge for small systems. * * Setting PPP_USE_PBUF_RAM to 1 makes PPP use memory from heap where continuous * buffers are required, allowing you to use a smaller PBUF_POOL_BUFSIZE. */ #ifndef PPP_USE_PBUF_RAM #define PPP_USE_PBUF_RAM 0 #endif /** * PPP_FCS_TABLE: Keep a 256*2 byte table to speed up FCS calculation for PPPoS */ #ifndef PPP_FCS_TABLE #define PPP_FCS_TABLE 1 #endif /** * PAP_SUPPORT==1: Support PAP. */ #ifndef PAP_SUPPORT #define PAP_SUPPORT 0 #endif /** * CHAP_SUPPORT==1: Support CHAP. */ #ifndef CHAP_SUPPORT #define CHAP_SUPPORT 0 #endif /** * MSCHAP_SUPPORT==1: Support MSCHAP. */ #ifndef MSCHAP_SUPPORT #define MSCHAP_SUPPORT 0 #endif #if MSCHAP_SUPPORT /* MSCHAP requires CHAP support */ #undef CHAP_SUPPORT #define CHAP_SUPPORT 1 #endif /* MSCHAP_SUPPORT */ /** * EAP_SUPPORT==1: Support EAP. */ #ifndef EAP_SUPPORT #define EAP_SUPPORT 0 #endif /** * CCP_SUPPORT==1: Support CCP. */ #ifndef CCP_SUPPORT #define CCP_SUPPORT 0 #endif /** * MPPE_SUPPORT==1: Support MPPE. */ #ifndef MPPE_SUPPORT #define MPPE_SUPPORT 0 #endif #if MPPE_SUPPORT /* MPPE requires CCP support */ #undef CCP_SUPPORT #define CCP_SUPPORT 1 /* MPPE requires MSCHAP support */ #undef MSCHAP_SUPPORT #define MSCHAP_SUPPORT 1 /* MSCHAP requires CHAP support */ #undef CHAP_SUPPORT #define CHAP_SUPPORT 1 #endif /* MPPE_SUPPORT */ /** * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET! */ #ifndef CBCP_SUPPORT #define CBCP_SUPPORT 0 #endif /** * ECP_SUPPORT==1: Support ECP. CURRENTLY NOT SUPPORTED! DO NOT SET! */ #ifndef ECP_SUPPORT #define ECP_SUPPORT 0 #endif /** * DEMAND_SUPPORT==1: Support dial on demand. CURRENTLY NOT SUPPORTED! DO NOT SET! */ #ifndef DEMAND_SUPPORT #define DEMAND_SUPPORT 0 #endif /** * LQR_SUPPORT==1: Support Link Quality Report. Do nothing except exchanging some LCP packets. */ #ifndef LQR_SUPPORT #define LQR_SUPPORT 0 #endif /** * PPP_SERVER==1: Enable PPP server support (waiting for incoming PPP session). * * Currently only supported for PPPoS. */ #ifndef PPP_SERVER #define PPP_SERVER 0 #endif #if PPP_SERVER /* * PPP_OUR_NAME: Our name for authentication purposes */ #ifndef PPP_OUR_NAME #define PPP_OUR_NAME "lwIP" #endif #endif /* PPP_SERVER */ /** * VJ_SUPPORT==1: Support VJ header compression. */ #ifndef VJ_SUPPORT #define VJ_SUPPORT 1 #endif /* VJ compression is only supported for IPv4 over PPPoS. */ #if !PPPOS_SUPPORT || !PPP_IPV4_SUPPORT #undef VJ_SUPPORT #define VJ_SUPPORT 0 #endif /* !PPPOS_SUPPORT */ /** * PPP_MD5_RANDM==1: Use MD5 for better randomness. * Enabled by default if CHAP, EAP, or L2TP AUTH support is enabled. */ #ifndef PPP_MD5_RANDM #define PPP_MD5_RANDM (CHAP_SUPPORT || EAP_SUPPORT || PPPOL2TP_AUTH_SUPPORT) #endif /** * PolarSSL library, used if necessary and not previously disabled * * * lwIP contains some files fetched from the latest BSD release of * the PolarSSL project for ciphers and encryption methods we need for lwIP * PPP support. * * The PolarSSL files were cleaned to contain only the necessary struct * fields and functions needed for lwIP. * * The PolarSSL API was not changed at all, so if you are already using * PolarSSL you can choose to skip the compilation of the included PolarSSL * library into lwIP: * * The following defines are available for flexibility: * * LWIP_INCLUDED_POLARSSL_MD4 ; Use lwIP internal PolarSSL for MD4 * LWIP_INCLUDED_POLARSSL_MD5 ; Use lwIP internal PolarSSL for MD5 * LWIP_INCLUDED_POLARSSL_SHA1 ; Use lwIP internal PolarSSL for SHA1 * LWIP_INCLUDED_POLARSSL_DES ; Use lwIP internal PolarSSL for DES * * If set (=1), the default if required by another enabled PPP feature unless * explicitly set to 0, using included lwIP PolarSSL. * * If clear (=0), not needed or using external PolarSSL. * * Beware of the stack requirements which can be a lot larger if you are not * using our cleaned PolarSSL library. */ /* CHAP, EAP, L2TP AUTH and MD5 Random require MD5 support */ #if CHAP_SUPPORT || EAP_SUPPORT || PPPOL2TP_AUTH_SUPPORT || PPP_MD5_RANDM #ifndef LWIP_INCLUDED_POLARSSL_MD5 #define LWIP_INCLUDED_POLARSSL_MD5 1 #endif /* LWIP_INCLUDED_POLARSSL_MD5 */ #endif /* CHAP_SUPPORT || EAP_SUPPORT || PPPOL2TP_AUTH_SUPPORT || PPP_MD5_RANDM */ #if MSCHAP_SUPPORT /* MSCHAP require MD4 support */ #ifndef LWIP_INCLUDED_POLARSSL_MD4 #define LWIP_INCLUDED_POLARSSL_MD4 1 #endif /* LWIP_INCLUDED_POLARSSL_MD4 */ /* MSCHAP require SHA1 support */ #ifndef LWIP_INCLUDED_POLARSSL_SHA1 #define LWIP_INCLUDED_POLARSSL_SHA1 1 #endif /* LWIP_INCLUDED_POLARSSL_SHA1 */ /* MSCHAP require DES support */ #ifndef LWIP_INCLUDED_POLARSSL_DES #define LWIP_INCLUDED_POLARSSL_DES 1 #endif /* LWIP_INCLUDED_POLARSSL_DES */ /* MS-CHAP support is required for MPPE */ #if MPPE_SUPPORT /* MPPE require ARC4 support */ #ifndef LWIP_INCLUDED_POLARSSL_ARC4 #define LWIP_INCLUDED_POLARSSL_ARC4 1 #endif /* LWIP_INCLUDED_POLARSSL_ARC4*/ #endif /* MPPE_SUPPORT */ #endif /* MSCHAP_SUPPORT */ /* Default value if unset */ #ifndef LWIP_INCLUDED_POLARSSL_MD4 #define LWIP_INCLUDED_POLARSSL_MD4 0 #endif /* LWIP_INCLUDED_POLARSSL_MD4 */ #ifndef LWIP_INCLUDED_POLARSSL_MD5 #define LWIP_INCLUDED_POLARSSL_MD5 0 #endif /* LWIP_INCLUDED_POLARSSL_MD5 */ #ifndef LWIP_INCLUDED_POLARSSL_SHA1 #define LWIP_INCLUDED_POLARSSL_SHA1 0 #endif /* LWIP_INCLUDED_POLARSSL_SHA1 */ #ifndef LWIP_INCLUDED_POLARSSL_DES #define LWIP_INCLUDED_POLARSSL_DES 0 #endif /* LWIP_INCLUDED_POLARSSL_DES */ #ifndef LWIP_INCLUDED_POLARSSL_ARC4 #define LWIP_INCLUDED_POLARSSL_ARC4 0 #endif /* LWIP_INCLUDED_POLARSSL_ARC4 */ /* * PPP Timeouts */ /** * FSM_DEFTIMEOUT: Timeout time in seconds */ #ifndef FSM_DEFTIMEOUT #define FSM_DEFTIMEOUT 6 #endif /** * FSM_DEFMAXTERMREQS: Maximum Terminate-Request transmissions */ #ifndef FSM_DEFMAXTERMREQS #define FSM_DEFMAXTERMREQS 2 #endif /** * FSM_DEFMAXCONFREQS: Maximum Configure-Request transmissions */ #ifndef FSM_DEFMAXCONFREQS #define FSM_DEFMAXCONFREQS 10 #endif /** * FSM_DEFMAXNAKLOOPS: Maximum number of nak loops */ #ifndef FSM_DEFMAXNAKLOOPS #define FSM_DEFMAXNAKLOOPS 5 #endif /** * UPAP_DEFTIMEOUT: Timeout (seconds) for retransmitting req */ #ifndef UPAP_DEFTIMEOUT #define UPAP_DEFTIMEOUT 6 #endif /** * UPAP_DEFTRANSMITS: Maximum number of auth-reqs to send */ #ifndef UPAP_DEFTRANSMITS #define UPAP_DEFTRANSMITS 10 #endif #if PPP_SERVER /** * UPAP_DEFREQTIME: Time to wait for auth-req from peer */ #ifndef UPAP_DEFREQTIME #define UPAP_DEFREQTIME 30 #endif #endif /* PPP_SERVER */ /** * CHAP_DEFTIMEOUT: Timeout (seconds) for retransmitting req */ #ifndef CHAP_DEFTIMEOUT #define CHAP_DEFTIMEOUT 6 #endif /** * CHAP_DEFTRANSMITS: max # times to send challenge */ #ifndef CHAP_DEFTRANSMITS #define CHAP_DEFTRANSMITS 10 #endif #if PPP_SERVER /** * CHAP_DEFRECHALLENGETIME: If this option is > 0, rechallenge the peer every n seconds */ #ifndef CHAP_DEFRECHALLENGETIME #define CHAP_DEFRECHALLENGETIME 0 #endif #endif /* PPP_SERVER */ /** * EAP_DEFREQTIME: Time to wait for peer request */ #ifndef EAP_DEFREQTIME #define EAP_DEFREQTIME 6 #endif /** * EAP_DEFALLOWREQ: max # times to accept requests */ #ifndef EAP_DEFALLOWREQ #define EAP_DEFALLOWREQ 10 #endif #if PPP_SERVER /** * EAP_DEFTIMEOUT: Timeout (seconds) for rexmit */ #ifndef EAP_DEFTIMEOUT #define EAP_DEFTIMEOUT 6 #endif /** * EAP_DEFTRANSMITS: max # times to transmit */ #ifndef EAP_DEFTRANSMITS #define EAP_DEFTRANSMITS 10 #endif #endif /* PPP_SERVER */ /** * LCP_DEFLOOPBACKFAIL: Default number of times we receive our magic number from the peer * before deciding the link is looped-back. */ #ifndef LCP_DEFLOOPBACKFAIL #define LCP_DEFLOOPBACKFAIL 10 #endif /** * LCP_ECHOINTERVAL: Interval in seconds between keepalive echo requests, 0 to disable. */ #ifndef LCP_ECHOINTERVAL #define LCP_ECHOINTERVAL 0 #endif /** * LCP_MAXECHOFAILS: Number of unanswered echo requests before failure. */ #ifndef LCP_MAXECHOFAILS #define LCP_MAXECHOFAILS 3 #endif /** * PPP_MAXIDLEFLAG: Max Xmit idle time (in ms) before resend flag char. */ #ifndef PPP_MAXIDLEFLAG #define PPP_MAXIDLEFLAG 100 #endif /** * PPP Packet sizes */ /** * PPP_MRU: Default MRU */ #ifndef PPP_MRU #define PPP_MRU 1500 #endif /** * PPP_DEFMRU: Default MRU to try */ #ifndef PPP_DEFMRU #define PPP_DEFMRU 1500 #endif /** * PPP_MAXMRU: Normally limit MRU to this (pppd default = 16384) */ #ifndef PPP_MAXMRU #define PPP_MAXMRU 1500 #endif /** * PPP_MINMRU: No MRUs below this */ #ifndef PPP_MINMRU #define PPP_MINMRU 128 #endif /** * PPPOL2TP_DEFMRU: Default MTU and MRU for L2TP * Default = 1500 - PPPoE(6) - PPP Protocol(2) - IPv4 header(20) - UDP Header(8) * - L2TP Header(6) - HDLC Header(2) - PPP Protocol(2) - MPPE Header(2) - PPP Protocol(2) */ #if PPPOL2TP_SUPPORT #ifndef PPPOL2TP_DEFMRU #define PPPOL2TP_DEFMRU 1450 #endif #endif /* PPPOL2TP_SUPPORT */ /** * MAXNAMELEN: max length of hostname or name for auth */ #ifndef MAXNAMELEN #define MAXNAMELEN 256 #endif /** * MAXSECRETLEN: max length of password or secret */ #ifndef MAXSECRETLEN #define MAXSECRETLEN 256 #endif #endif /* PPP_SUPPORT */ /* -------------------------------------- ---------- Checksum options ---------- -------------------------------------- */ /** * LWIP_CHECKSUM_CTRL_PER_NETIF==1: Checksum generation/check can be enabled/disabled * per netif. * ATTENTION: if enabled, the CHECKSUM_GEN_* and CHECKSUM_CHECK_* defines must be enabled! */ #ifndef LWIP_CHECKSUM_CTRL_PER_NETIF #define LWIP_CHECKSUM_CTRL_PER_NETIF 0 #endif /** * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets. */ #ifndef CHECKSUM_GEN_IP #define CHECKSUM_GEN_IP 1 #endif /** * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets. */ #ifndef CHECKSUM_GEN_UDP #define CHECKSUM_GEN_UDP 1 #endif /** * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets. */ #ifndef CHECKSUM_GEN_TCP #define CHECKSUM_GEN_TCP 1 #endif /** * CHECKSUM_GEN_ICMP==1: Generate checksums in software for outgoing ICMP packets. */ #ifndef CHECKSUM_GEN_ICMP #define CHECKSUM_GEN_ICMP 1 #endif /** * CHECKSUM_GEN_ICMP6==1: Generate checksums in software for outgoing ICMP6 packets. */ #ifndef CHECKSUM_GEN_ICMP6 #define CHECKSUM_GEN_ICMP6 1 #endif /** * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets. */ #ifndef CHECKSUM_CHECK_IP #define CHECKSUM_CHECK_IP 1 #endif /** * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets. */ #ifndef CHECKSUM_CHECK_UDP #define CHECKSUM_CHECK_UDP 1 #endif /** * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets. */ #ifndef CHECKSUM_CHECK_TCP #define CHECKSUM_CHECK_TCP 1 #endif /** * CHECKSUM_CHECK_ICMP==1: Check checksums in software for incoming ICMP packets. */ #ifndef CHECKSUM_CHECK_ICMP #define CHECKSUM_CHECK_ICMP 1 #endif /** * CHECKSUM_CHECK_ICMP6==1: Check checksums in software for incoming ICMPv6 packets */ #ifndef CHECKSUM_CHECK_ICMP6 #define CHECKSUM_CHECK_ICMP6 1 #endif /** * LWIP_CHECKSUM_ON_COPY==1: Calculate checksum when copying data from * application buffers to pbufs. */ #ifndef LWIP_CHECKSUM_ON_COPY #define LWIP_CHECKSUM_ON_COPY 0 #endif /* --------------------------------------- ---------- IPv6 options --------------- --------------------------------------- */ /** * LWIP_IPV6==1: Enable IPv6 */ #ifndef LWIP_IPV6 #define LWIP_IPV6 0 #endif /** * LWIP_IPV6_NUM_ADDRESSES: Number of IPv6 addresses per netif. */ #ifndef LWIP_IPV6_NUM_ADDRESSES #define LWIP_IPV6_NUM_ADDRESSES 3 #endif /** * LWIP_IPV6_FORWARD==1: Forward IPv6 packets across netifs */ #ifndef LWIP_IPV6_FORWARD #define LWIP_IPV6_FORWARD 0 #endif /** * LWIP_ICMP6==1: Enable ICMPv6 (mandatory per RFC) */ #ifndef LWIP_ICMP6 #define LWIP_ICMP6 (LWIP_IPV6) #endif /** * LWIP_ICMP6_DATASIZE: bytes from original packet to send back in * ICMPv6 error messages. */ #ifndef LWIP_ICMP6_DATASIZE #define LWIP_ICMP6_DATASIZE 8 #endif /** * LWIP_ICMP6_HL: default hop limit for ICMPv6 messages */ #ifndef LWIP_ICMP6_HL #define LWIP_ICMP6_HL 255 #endif /** * LWIP_IPV6_MLD==1: Enable multicast listener discovery protocol. */ #ifndef LWIP_IPV6_MLD #define LWIP_IPV6_MLD (LWIP_IPV6) #endif /** * MEMP_NUM_MLD6_GROUP: Max number of IPv6 multicast that can be joined. */ #ifndef MEMP_NUM_MLD6_GROUP #define MEMP_NUM_MLD6_GROUP 4 #endif /** * LWIP_IPV6_FRAG==1: Fragment outgoing IPv6 packets that are too big. */ #ifndef LWIP_IPV6_FRAG #define LWIP_IPV6_FRAG 0 #endif /** * LWIP_IPV6_REASS==1: reassemble incoming IPv6 packets that fragmented */ #ifndef LWIP_IPV6_REASS #define LWIP_IPV6_REASS (LWIP_IPV6) #endif /** * LWIP_ND6_QUEUEING==1: queue outgoing IPv6 packets while MAC address * is being resolved. */ #ifndef LWIP_ND6_QUEUEING #define LWIP_ND6_QUEUEING (LWIP_IPV6) #endif /** * MEMP_NUM_ND6_QUEUE: Max number of IPv6 packets to queue during MAC resolution. */ #ifndef MEMP_NUM_ND6_QUEUE #define MEMP_NUM_ND6_QUEUE 20 #endif /** * LWIP_ND6_NUM_NEIGHBORS: Number of entries in IPv6 neighbor cache */ #ifndef LWIP_ND6_NUM_NEIGHBORS #define LWIP_ND6_NUM_NEIGHBORS 10 #endif /** * LWIP_ND6_NUM_DESTINATIONS: number of entries in IPv6 destination cache */ #ifndef LWIP_ND6_NUM_DESTINATIONS #define LWIP_ND6_NUM_DESTINATIONS 10 #endif /** * LWIP_ND6_NUM_PREFIXES: number of entries in IPv6 on-link prefixes cache */ #ifndef LWIP_ND6_NUM_PREFIXES #define LWIP_ND6_NUM_PREFIXES 5 #endif /** * LWIP_ND6_NUM_ROUTERS: number of entries in IPv6 default router cache */ #ifndef LWIP_ND6_NUM_ROUTERS #define LWIP_ND6_NUM_ROUTERS 3 #endif /** * LWIP_ND6_MAX_MULTICAST_SOLICIT: max number of multicast solicit messages to send * (neighbor solicit and router solicit) */ #ifndef LWIP_ND6_MAX_MULTICAST_SOLICIT #define LWIP_ND6_MAX_MULTICAST_SOLICIT 3 #endif /** * LWIP_ND6_MAX_UNICAST_SOLICIT: max number of unicast neighbor solicitation messages * to send during neighbor reachability detection. */ #ifndef LWIP_ND6_MAX_UNICAST_SOLICIT #define LWIP_ND6_MAX_UNICAST_SOLICIT 3 #endif /** * Unused: See ND RFC (time in milliseconds). */ #ifndef LWIP_ND6_MAX_ANYCAST_DELAY_TIME #define LWIP_ND6_MAX_ANYCAST_DELAY_TIME 1000 #endif /** * Unused: See ND RFC */ #ifndef LWIP_ND6_MAX_NEIGHBOR_ADVERTISEMENT #define LWIP_ND6_MAX_NEIGHBOR_ADVERTISEMENT 3 #endif /** * LWIP_ND6_REACHABLE_TIME: default neighbor reachable time (in milliseconds). * May be updated by router advertisement messages. */ #ifndef LWIP_ND6_REACHABLE_TIME #define LWIP_ND6_REACHABLE_TIME 30000 #endif /** * LWIP_ND6_RETRANS_TIMER: default retransmission timer for solicitation messages */ #ifndef LWIP_ND6_RETRANS_TIMER #define LWIP_ND6_RETRANS_TIMER 1000 #endif /** * LWIP_ND6_DELAY_FIRST_PROBE_TIME: Delay before first unicast neighbor solicitation * message is sent, during neighbor reachability detection. */ #ifndef LWIP_ND6_DELAY_FIRST_PROBE_TIME #define LWIP_ND6_DELAY_FIRST_PROBE_TIME 5000 #endif /** * LWIP_ND6_ALLOW_RA_UPDATES==1: Allow Router Advertisement messages to update * Reachable time and retransmission timers, and netif MTU. */ #ifndef LWIP_ND6_ALLOW_RA_UPDATES #define LWIP_ND6_ALLOW_RA_UPDATES 1 #endif /** * LWIP_IPV6_SEND_ROUTER_SOLICIT==1: Send router solicitation messages during * network startup. */ #ifndef LWIP_IPV6_SEND_ROUTER_SOLICIT #define LWIP_IPV6_SEND_ROUTER_SOLICIT 1 #endif /** * LWIP_ND6_TCP_REACHABILITY_HINTS==1: Allow TCP to provide Neighbor Discovery * with reachability hints for connected destinations. This helps avoid sending * unicast neighbor solicitation messages. */ #ifndef LWIP_ND6_TCP_REACHABILITY_HINTS #define LWIP_ND6_TCP_REACHABILITY_HINTS 1 #endif /** * LWIP_IPV6_AUTOCONFIG==1: Enable stateless address autoconfiguration as per RFC 4862. */ #ifndef LWIP_IPV6_AUTOCONFIG #define LWIP_IPV6_AUTOCONFIG (LWIP_IPV6) #endif /** * LWIP_IPV6_DUP_DETECT_ATTEMPTS: Number of duplicate address detection attempts. */ #ifndef LWIP_IPV6_DUP_DETECT_ATTEMPTS #define LWIP_IPV6_DUP_DETECT_ATTEMPTS 1 #endif /** * LWIP_IPV6_DHCP6==1: enable DHCPv6 stateful address autoconfiguration. */ #ifndef LWIP_IPV6_DHCP6 #define LWIP_IPV6_DHCP6 0 #endif /* --------------------------------------- ---------- Hook options --------------- --------------------------------------- */ /* Hooks are undefined by default, define them to a function if you need them. */ /** * LWIP_HOOK_IP4_INPUT(pbuf, input_netif): * - called from ip_input() (IPv4) * - pbuf: received struct pbuf passed to ip_input() * - input_netif: struct netif on which the packet has been received * Return values: * - 0: Hook has not consumed the packet, packet is processed as normal * - != 0: Hook has consumed the packet. * If the hook consumed the packet, 'pbuf' is in the responsibility of the hook * (i.e. free it when done). */ /** * LWIP_HOOK_IP4_ROUTE(dest): * - called from ip_route() (IPv4) * - dest: destination IPv4 address * Returns the destination netif or NULL if no destination netif is found. In * that case, ip_route() continues as normal. */ /** * LWIP_HOOK_IP4_ROUTE_SRC(dest, src): * - source-based routing for IPv4 (see LWIP_HOOK_IP4_ROUTE(), src may be NULL) */ /** * LWIP_HOOK_ETHARP_GET_GW(netif, dest): * - called from etharp_output() (IPv4) * - netif: the netif used for sending * - dest: the destination IPv4 address * Returns the IPv4 address of the gateway to handle the specified destination * IPv4 address. If NULL is returned, the netif's default gateway is used. * The returned address MUST be reachable on the specified netif! * This function is meant to implement advanced IPv4 routing together with * LWIP_HOOK_IP4_ROUTE(). The actual routing/gateway table implementation is * not part of lwIP but can e.g. be hidden in the netif's state argument. */ /** * LWIP_HOOK_IP6_INPUT(pbuf, input_netif): * - called from ip6_input() (IPv6) * - pbuf: received struct pbuf passed to ip6_input() * - input_netif: struct netif on which the packet has been received * Return values: * - 0: Hook has not consumed the packet, packet is processed as normal * - != 0: Hook has consumed the packet. * If the hook consumed the packet, 'pbuf' is in the responsibility of the hook * (i.e. free it when done). */ /** * LWIP_HOOK_IP6_ROUTE(src, dest): * - called from ip6_route() (IPv6) * - src: sourc IPv6 address * - dest: destination IPv6 address * Returns the destination netif or NULL if no destination netif is found. In * that case, ip6_route() continues as normal. */ /** * LWIP_HOOK_VLAN_CHECK(netif, eth_hdr, vlan_hdr): * - called from ethernet_input() if VLAN support is enabled * - netif: struct netif on which the packet has been received * - eth_hdr: struct eth_hdr of the packet * - vlan_hdr: struct eth_vlan_hdr of the packet * Return values: * - 0: Packet must be dropped. * - != 0: Packet must be accepted. */ /** * LWIP_HOOK_VLAN_SET(netif, eth_hdr, vlan_hdr): * - called from etharp_raw() and etharp_send_ip() if VLAN support is enabled * - netif: struct netif that the packet will be sent through * - eth_hdr: struct eth_hdr of the packet * - vlan_hdr: struct eth_vlan_hdr of the packet * Return values: * - 0: Packet shall not contain VLAN header. * - != 0: Packet shall contain VLAN header. * Hook can be used to set prio_vid field of vlan_hdr. */ /** * LWIP_HOOK_MEMP_AVAILABLE(memp_t_type): * - called from memp_free() when a memp pool was empty and an item is now available */ /* --------------------------------------- ---------- Debugging options ---------- --------------------------------------- */ /** * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is * compared against this value. If it is smaller, then debugging * messages are written. */ #ifndef LWIP_DBG_MIN_LEVEL #define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_ALL #endif /** * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable * debug messages of certain types. */ #ifndef LWIP_DBG_TYPES_ON #define LWIP_DBG_TYPES_ON LWIP_DBG_ON #endif /** * ETHARP_DEBUG: Enable debugging in etharp.c. */ #ifndef ETHARP_DEBUG #define ETHARP_DEBUG LWIP_DBG_OFF #endif /** * NETIF_DEBUG: Enable debugging in netif.c. */ #ifndef NETIF_DEBUG #define NETIF_DEBUG LWIP_DBG_OFF #endif /** * PBUF_DEBUG: Enable debugging in pbuf.c. */ #ifndef PBUF_DEBUG #define PBUF_DEBUG LWIP_DBG_OFF #endif /** * API_LIB_DEBUG: Enable debugging in api_lib.c. */ #ifndef API_LIB_DEBUG #define API_LIB_DEBUG LWIP_DBG_OFF #endif /** * API_MSG_DEBUG: Enable debugging in api_msg.c. */ #ifndef API_MSG_DEBUG #define API_MSG_DEBUG LWIP_DBG_OFF #endif /** * SOCKETS_DEBUG: Enable debugging in sockets.c. */ #ifndef SOCKETS_DEBUG #define SOCKETS_DEBUG LWIP_DBG_OFF #endif /** * ICMP_DEBUG: Enable debugging in icmp.c. */ #ifndef ICMP_DEBUG #define ICMP_DEBUG LWIP_DBG_OFF #endif /** * IGMP_DEBUG: Enable debugging in igmp.c. */ #ifndef IGMP_DEBUG #define IGMP_DEBUG LWIP_DBG_OFF #endif /** * INET_DEBUG: Enable debugging in inet.c. */ #ifndef INET_DEBUG #define INET_DEBUG LWIP_DBG_OFF #endif /** * IP_DEBUG: Enable debugging for IP. */ #ifndef IP_DEBUG #define IP_DEBUG LWIP_DBG_OFF #endif /** * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass. */ #ifndef IP_REASS_DEBUG #define IP_REASS_DEBUG LWIP_DBG_OFF #endif /** * RAW_DEBUG: Enable debugging in raw.c. */ #ifndef RAW_DEBUG #define RAW_DEBUG LWIP_DBG_OFF #endif /** * MEM_DEBUG: Enable debugging in mem.c. */ #ifndef MEM_DEBUG #define MEM_DEBUG LWIP_DBG_OFF #endif /** * MEMP_DEBUG: Enable debugging in memp.c. */ #ifndef MEMP_DEBUG #define MEMP_DEBUG LWIP_DBG_OFF #endif /** * SYS_DEBUG: Enable debugging in sys.c. */ #ifndef SYS_DEBUG #define SYS_DEBUG LWIP_DBG_OFF #endif /** * TIMERS_DEBUG: Enable debugging in timers.c. */ #ifndef TIMERS_DEBUG #define TIMERS_DEBUG LWIP_DBG_OFF #endif /** * TCP_DEBUG: Enable debugging for TCP. */ #ifndef TCP_DEBUG #define TCP_DEBUG LWIP_DBG_OFF #endif /** * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug. */ #ifndef TCP_INPUT_DEBUG #define TCP_INPUT_DEBUG LWIP_DBG_OFF #endif /** * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit. */ #ifndef TCP_FR_DEBUG #define TCP_FR_DEBUG LWIP_DBG_OFF #endif /** * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit * timeout. */ #ifndef TCP_RTO_DEBUG #define TCP_RTO_DEBUG LWIP_DBG_OFF #endif /** * TCP_CWND_DEBUG: Enable debugging for TCP congestion window. */ #ifndef TCP_CWND_DEBUG #define TCP_CWND_DEBUG LWIP_DBG_OFF #endif /** * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating. */ #ifndef TCP_WND_DEBUG #define TCP_WND_DEBUG LWIP_DBG_OFF #endif /** * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions. */ #ifndef TCP_OUTPUT_DEBUG #define TCP_OUTPUT_DEBUG LWIP_DBG_OFF #endif /** * TCP_RST_DEBUG: Enable debugging for TCP with the RST message. */ #ifndef TCP_RST_DEBUG #define TCP_RST_DEBUG LWIP_DBG_OFF #endif /** * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths. */ #ifndef TCP_QLEN_DEBUG #define TCP_QLEN_DEBUG LWIP_DBG_OFF #endif /** * UDP_DEBUG: Enable debugging in UDP. */ #ifndef UDP_DEBUG #define UDP_DEBUG LWIP_DBG_OFF #endif /** * TCPIP_DEBUG: Enable debugging in tcpip.c. */ #ifndef TCPIP_DEBUG #define TCPIP_DEBUG LWIP_DBG_OFF #endif /** * PPP_DEBUG: Enable debugging for PPP. */ #ifndef PPP_DEBUG #define PPP_DEBUG LWIP_DBG_OFF #endif /** * SLIP_DEBUG: Enable debugging in slipif.c. */ #ifndef SLIP_DEBUG #define SLIP_DEBUG LWIP_DBG_OFF #endif /** * DHCP_DEBUG: Enable debugging in dhcp.c. */ #ifndef DHCP_DEBUG #define DHCP_DEBUG LWIP_DBG_OFF #endif /** * AUTOIP_DEBUG: Enable debugging in autoip.c. */ #ifndef AUTOIP_DEBUG #define AUTOIP_DEBUG LWIP_DBG_OFF #endif /** * DNS_DEBUG: Enable debugging for DNS. */ #ifndef DNS_DEBUG #define DNS_DEBUG LWIP_DBG_OFF #endif /** * IP6_DEBUG: Enable debugging for IPv6. */ #ifndef IP6_DEBUG #define IP6_DEBUG LWIP_DBG_OFF #endif /* -------------------------------------------------- ---------- Performance tracking options ---------- -------------------------------------------------- */ /** * LWIP_PERF: Enable performance testing for lwIP * (if enabled, arch/perf.h is included) */ #ifndef LWIP_PERF #define LWIP_PERF 0 #endif /** * ESP_L2_TO_L3_COPY: enable memcpy when receiving packet from L2 */ #ifndef ESP_L2_TO_L3_COPY #define ESP_L2_TO_L3_COPY 0 #endif #ifndef ESP_THREAD_SAFE_DEBUG #define ESP_THREAD_SAFE_DEBUG 0 #endif #endif /* LWIP_HDR_OPT_H */