/****************************************************************************** * * Copyright (C) 1999-2012 Broadcom Corporation * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ******************************************************************************/ /****************************************************************************** * * This file contains the Bluetooth Manager (BTM) API function external * definitions. * ******************************************************************************/ #ifndef BTM_BLE_API_H #define BTM_BLE_API_H #include "common/bt_defs.h" #include "stack/btm_api.h" #include "common/bt_common_types.h" #define CHANNEL_MAP_LEN 5 typedef UINT8 tBTM_BLE_CHNL_MAP[CHANNEL_MAP_LEN]; /* 0x00-0x04 only used for set advertising parameter command */ #define BTM_BLE_CONNECT_EVT 0x00 /* 0x00-0x04 only used for set advertising parameter command */ #define BTM_BLE_CONNECT_DIR_EVT 0x01 /* Connectable directed advertising */ #define BTM_BLE_DISCOVER_EVT 0x02 /* Scannable undirected advertising */ #define BTM_BLE_NON_CONNECT_EVT 0x03 /* Non connectable undirected advertising */ #define BTM_BLE_CONNECT_LO_DUTY_DIR_EVT 0x04 /* Connectable low duty cycle directed advertising */ /* 0x00 - 0x05 can be received on adv event type */ #define BTM_BLE_SCAN_RSP_EVT 0x04 #define BTM_BLE_SCAN_REQ_EVT 0x05 #define BTM_BLE_UNKNOWN_EVT 0xff #define BTM_BLE_UNKNOWN_EVT 0xff typedef UINT8 tBTM_BLE_EVT; typedef UINT8 tBTM_BLE_CONN_MODE; typedef UINT32 tBTM_BLE_REF_VALUE; #define BTM_BLE_SCAN_MODE_PASS 0 #define BTM_BLE_SCAN_MODE_ACTI 1 #define BTM_BLE_SCAN_MODE_NONE 0xff typedef UINT8 tBLE_SCAN_MODE; #define BTM_BLE_BATCH_SCAN_MODE_DISABLE 0 #define BTM_BLE_BATCH_SCAN_MODE_PASS 1 #define BTM_BLE_BATCH_SCAN_MODE_ACTI 2 #define BTM_BLE_BATCH_SCAN_MODE_PASS_ACTI 3 typedef UINT8 tBTM_BLE_BATCH_SCAN_MODE; /* advertising channel map */ #define BTM_BLE_ADV_CHNL_37 (0x01 << 0) #define BTM_BLE_ADV_CHNL_38 (0x01 << 1) #define BTM_BLE_ADV_CHNL_39 (0x01 << 2) typedef UINT8 tBTM_BLE_ADV_CHNL_MAP; /*d efault advertising channel map */ #ifndef BTM_BLE_DEFAULT_ADV_CHNL_MAP #define BTM_BLE_DEFAULT_ADV_CHNL_MAP (BTM_BLE_ADV_CHNL_37| BTM_BLE_ADV_CHNL_38| BTM_BLE_ADV_CHNL_39) #endif /* advertising filter policy */ #define AP_SCAN_CONN_ALL 0x00 /* default */ #define AP_SCAN_WL_CONN_ALL 0x01 #define AP_SCAN_ALL_CONN_WL 0x02 #define AP_SCAN_CONN_WL 0x03 #define AP_SCAN_CONN_POLICY_MAX 0x04 typedef UINT8 tBTM_BLE_AFP; /* default advertising filter policy */ #ifndef BTM_BLE_DEFAULT_AFP #define BTM_BLE_DEFAULT_AFP AP_SCAN_CONN_ALL #endif /* scanning filter policy */ #define SP_ADV_ALL 0x00 /* 0: accept adv packet from all, directed adv pkt not directed */ /* to local device is ignored */ #define SP_ADV_WL 0x01 /* 1: accept adv packet from device in white list, directed adv */ /* packet not directed to local device is ignored */ #define SP_ADV_ALL_RPA_DIR_ADV 0x02 /* 2: accept adv packet from all, directed adv pkt */ /* not directed to me is ignored except direct adv with RPA */ #define SP_ADV_WL_RPA_DIR_ADV 0x03 /* 3: accept adv packet from device in white list, directed */ /* adv pkt not directed to me is ignored except direct adv */ /* with RPA */ typedef UINT8 tBTM_BLE_SFP; #ifndef BTM_BLE_DEFAULT_SFP #define BTM_BLE_DEFAULT_SFP SP_ADV_ALL #endif /* adv parameter boundary values */ #define BTM_BLE_ADV_INT_MIN 0x0020 #define BTM_BLE_ADV_INT_MAX 0x4000 /* Full scan boundary values */ #define BTM_BLE_ADV_SCAN_FULL_MIN 0x00 #define BTM_BLE_ADV_SCAN_FULL_MAX 0x64 /* Partial scan boundary values */ #define BTM_BLE_ADV_SCAN_TRUNC_MIN BTM_BLE_ADV_SCAN_FULL_MIN #define BTM_BLE_ADV_SCAN_TRUNC_MAX BTM_BLE_ADV_SCAN_FULL_MAX /* Threshold values */ #define BTM_BLE_ADV_SCAN_THR_MIN BTM_BLE_ADV_SCAN_FULL_MIN #define BTM_BLE_ADV_SCAN_THR_MAX BTM_BLE_ADV_SCAN_FULL_MAX /* connection parameter boundary values */ #define BTM_BLE_SCAN_INT_MIN 0x0004 #define BTM_BLE_SCAN_INT_MAX 0x4000 #define BTM_BLE_SCAN_WIN_MIN 0x0004 #define BTM_BLE_SCAN_WIN_MAX 0x4000 #define BTM_BLE_EXT_SCAN_INT_MAX 0x00FFFFFF #define BTM_BLE_EXT_SCAN_WIN_MAX 0xFFFF #define BTM_BLE_CONN_INT_MIN 0x0006 #define BTM_BLE_CONN_INT_MAX 0x0C80 #define BTM_BLE_CONN_LATENCY_MAX 500 #define BTM_BLE_CONN_SUP_TOUT_MIN 0x000A #define BTM_BLE_CONN_SUP_TOUT_MAX 0x0C80 #define BTM_BLE_CONN_PARAM_UNDEF 0xffff /* use this value when a specific value not to be overwritten */ #define BTM_BLE_SCAN_PARAM_UNDEF 0xffffffff /* default connection parameters if not configured, use GAP recommend value for auto/selective connection */ /* default scan interval */ #ifndef BTM_BLE_SCAN_FAST_INT #define BTM_BLE_SCAN_FAST_INT 96 /* 30 ~ 60 ms (use 60) = 96 *0.625 */ #endif /* default scan window for background connection, applicable for auto connection or selective conenction */ #ifndef BTM_BLE_SCAN_FAST_WIN #define BTM_BLE_SCAN_FAST_WIN 48 /* 30 ms = 48 *0.625 */ #endif /* default scan paramter used in reduced power cycle (background scanning) */ #ifndef BTM_BLE_SCAN_SLOW_INT_1 #define BTM_BLE_SCAN_SLOW_INT_1 2048 /* 1.28 s = 2048 *0.625 */ #endif #ifndef BTM_BLE_SCAN_SLOW_WIN_1 #define BTM_BLE_SCAN_SLOW_WIN_1 48 /* 30 ms = 48 *0.625 */ #endif /* default scan paramter used in reduced power cycle (background scanning) */ #ifndef BTM_BLE_SCAN_SLOW_INT_2 #define BTM_BLE_SCAN_SLOW_INT_2 4096 /* 2.56 s = 4096 *0.625 */ #endif #ifndef BTM_BLE_SCAN_SLOW_WIN_2 #define BTM_BLE_SCAN_SLOW_WIN_2 36 /* 22.5 ms = 36 *0.625 */ #endif /* default connection interval min */ #ifndef BTM_BLE_CONN_INT_MIN_DEF #define BTM_BLE_CONN_INT_MIN_DEF 10 /* recommended min: 12.5 ms = 10 * 1.25 */ #endif /* default connection interval max */ #ifndef BTM_BLE_CONN_INT_MAX_DEF #define BTM_BLE_CONN_INT_MAX_DEF 12 /* recommended max: 15 ms = 12 * 1.25 */ #endif /* default slave latency */ #ifndef BTM_BLE_CONN_SLAVE_LATENCY_DEF #define BTM_BLE_CONN_SLAVE_LATENCY_DEF 0 /* 0 */ #endif /* default supervision timeout */ #ifndef BTM_BLE_CONN_TIMEOUT_DEF #define BTM_BLE_CONN_TIMEOUT_DEF 600 #endif /* minimum acceptable connection interval */ #ifndef BTM_BLE_CONN_INT_MIN_LIMIT #define BTM_BLE_CONN_INT_MIN_LIMIT 0x0009 #endif #define BTM_BLE_DIR_CONN_FALLBACK_UNDIR 1 #define BTM_BLE_DIR_CONN_FALLBACK_NO_ADV 2 #ifndef BTM_BLE_DIR_CONN_FALLBACK #define BTM_BLE_DIR_CONN_FALLBACK BTM_BLE_DIR_CONN_FALLBACK_UNDIR #endif #define BTM_CMAC_TLEN_SIZE 8 /* 64 bits */ #define BTM_BLE_AUTH_SIGN_LEN 12 /* BLE data signature length 8 Bytes + 4 bytes counter*/ typedef UINT8 BLE_SIGNATURE[BTM_BLE_AUTH_SIGN_LEN]; /* Device address */ #ifndef BTM_BLE_HOST_SUPPORT #define BTM_BLE_HOST_SUPPORT 0x01 #endif #ifndef BTM_BLE_SIMULTANEOUS_HOST #define BTM_BLE_SIMULTANEOUS_HOST 0x01 #endif /* Appearance Values Reported with BTM_BLE_AD_TYPE_APPEARANCE */ #define BTM_BLE_APPEARANCE_UNKNOWN 0x0000 #define BTM_BLE_APPEARANCE_GENERIC_PHONE 0x0040 #define BTM_BLE_APPEARANCE_GENERIC_COMPUTER 0x0080 #define BTM_BLE_APPEARANCE_GENERIC_WATCH 0x00C0 #define BTM_BLE_APPEARANCE_SPORTS_WATCH 0x00C1 #define BTM_BLE_APPEARANCE_GENERIC_CLOCK 0x0100 #define BTM_BLE_APPEARANCE_GENERIC_DISPLAY 0x0140 #define BTM_BLE_APPEARANCE_GENERIC_REMOTE 0x0180 #define BTM_BLE_APPEARANCE_GENERIC_EYEGLASSES 0x01C0 #define BTM_BLE_APPEARANCE_GENERIC_TAG 0x0200 #define BTM_BLE_APPEARANCE_GENERIC_KEYRING 0x0240 #define BTM_BLE_APPEARANCE_GENERIC_MEDIA_PLAYER 0x0280 #define BTM_BLE_APPEARANCE_GENERIC_BARCODE_SCANNER 0x02C0 #define BTM_BLE_APPEARANCE_GENERIC_THERMOMETER 0x0300 #define BTM_BLE_APPEARANCE_THERMOMETER_EAR 0x0301 #define BTM_BLE_APPEARANCE_GENERIC_HEART_RATE 0x0340 #define BTM_BLE_APPEARANCE_HEART_RATE_BELT 0x0341 #define BTM_BLE_APPEARANCE_GENERIC_BLOOD_PRESSURE 0x0380 #define BTM_BLE_APPEARANCE_BLOOD_PRESSURE_ARM 0x0381 #define BTM_BLE_APPEARANCE_BLOOD_PRESSURE_WRIST 0x0382 #define BTM_BLE_APPEARANCE_GENERIC_HID 0x03C0 #define BTM_BLE_APPEARANCE_HID_KEYBOARD 0x03C1 #define BTM_BLE_APPEARANCE_HID_MOUSE 0x03C2 #define BTM_BLE_APPEARANCE_HID_JOYSTICK 0x03C3 #define BTM_BLE_APPEARANCE_HID_GAMEPAD 0x03C4 #define BTM_BLE_APPEARANCE_HID_DIGITIZER_TABLET 0x03C5 #define BTM_BLE_APPEARANCE_HID_CARD_READER 0x03C6 #define BTM_BLE_APPEARANCE_HID_DIGITAL_PEN 0x03C7 #define BTM_BLE_APPEARANCE_HID_BARCODE_SCANNER 0x03C8 #define BTM_BLE_APPEARANCE_GENERIC_GLUCOSE 0x0400 #define BTM_BLE_APPEARANCE_GENERIC_WALKING 0x0440 #define BTM_BLE_APPEARANCE_WALKING_IN_SHOE 0x0441 #define BTM_BLE_APPEARANCE_WALKING_ON_SHOE 0x0442 #define BTM_BLE_APPEARANCE_WALKING_ON_HIP 0x0443 #define BTM_BLE_APPEARANCE_GENERIC_CYCLING 0x0480 #define BTM_BLE_APPEARANCE_CYCLING_COMPUTER 0x0481 #define BTM_BLE_APPEARANCE_CYCLING_SPEED 0x0482 #define BTM_BLE_APPEARANCE_CYCLING_CADENCE 0x0483 #define BTM_BLE_APPEARANCE_CYCLING_POWER 0x0484 #define BTM_BLE_APPEARANCE_CYCLING_SPEED_CADENCE 0x0485 #define BTM_BLE_APPEARANCE_GENERIC_PULSE_OXIMETER 0x0C40 #define BTM_BLE_APPEARANCE_PULSE_OXIMETER_FINGERTIP 0x0C41 #define BTM_BLE_APPEARANCE_PULSE_OXIMETER_WRIST 0x0C42 #define BTM_BLE_APPEARANCE_GENERIC_WEIGHT 0x0C80 #define BTM_BLE_APPEARANCE_GENERIC_PERSONAL_MOBILITY_DEVICE 0x0CC0 #define BTM_BLE_APPEARANCE_POWERED_WHEELCHAIR 0x0CC1 #define BTM_BLE_APPEARANCE_MOBILITY_SCOOTER 0x0CC2 #define BTM_BLE_APPEARANCE_GENERIC_CONTINUOUS_GLUCOSE_MONITOR 0x0D00 #define BTM_BLE_APPEARANCE_GENERIC_INSULIN_PUMP 0x0D40 #define BTM_BLE_APPEARANCE_INSULIN_PUMP_DURABLE_PUMP 0x0D41 #define BTM_BLE_APPEARANCE_INSULIN_PUMP_PATCH_PUMP 0x0D44 #define BTM_BLE_APPEARANCE_INSULIN_PEN 0x0D48 #define BTM_BLE_APPEARANCE_GENERIC_MEDICATION_DELIVERY 0x0D80 #define BTM_BLE_APPEARANCE_GENERIC_OUTDOOR_SPORTS 0x1440 #define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION 0x1441 #define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION_AND_NAV 0x1442 #define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION_POD 0x1443 #define BTM_BLE_APPEARANCE_OUTDOOR_SPORTS_LOCATION_POD_AND_NAV 0x1444 /* Structure returned with Rand/Encrypt complete callback */ typedef struct { UINT8 status; UINT8 param_len; UINT16 opcode; UINT8 param_buf[BT_OCTET16_LEN]; } tBTM_RAND_ENC; /* General callback function for notifying an application that a synchronous ** BTM function is complete. The pointer contains the address of any returned data. */ typedef void (tBTM_RAND_ENC_CB) (tBTM_RAND_ENC *p1); #define BTM_BLE_FILTER_TARGET_SCANNER 0x01 #define BTM_BLE_FILTER_TARGET_ADVR 0x00 #define BTM_BLE_POLICY_BLACK_ALL 0x00 /* relevant to both */ #define BTM_BLE_POLICY_ALLOW_SCAN 0x01 /* relevant to advertiser */ #define BTM_BLE_POLICY_ALLOW_CONN 0x02 /* relevant to advertiser */ #define BTM_BLE_POLICY_WHITE_ALL 0x03 /* relevant to both */ /* ADV data flag bit definition used for BTM_BLE_AD_TYPE_FLAG */ #define BTM_BLE_LIMIT_DISC_FLAG (0x01 << 0) #define BTM_BLE_GEN_DISC_FLAG (0x01 << 1) #define BTM_BLE_BREDR_NOT_SPT (0x01 << 2) /* 4.1 spec adv flag for simultaneous BR/EDR+LE connection support */ #define BTM_BLE_DMT_CONTROLLER_SPT (0x01 << 3) #define BTM_BLE_DMT_HOST_SPT (0x01 << 4) #define BTM_BLE_NON_LIMIT_DISC_FLAG (0x00 ) /* lowest bit unset */ #define BTM_BLE_ADV_FLAG_MASK (BTM_BLE_LIMIT_DISC_FLAG | BTM_BLE_BREDR_NOT_SPT | BTM_BLE_GEN_DISC_FLAG) #define BTM_BLE_LIMIT_DISC_MASK (BTM_BLE_LIMIT_DISC_FLAG ) #define BTM_BLE_AD_BIT_DEV_NAME (0x00000001 << 0) #define BTM_BLE_AD_BIT_FLAGS (0x00000001 << 1) #define BTM_BLE_AD_BIT_MANU (0x00000001 << 2) #define BTM_BLE_AD_BIT_TX_PWR (0x00000001 << 3) #define BTM_BLE_AD_BIT_INT_RANGE (0x00000001 << 5) #define BTM_BLE_AD_BIT_SERVICE (0x00000001 << 6) #define BTM_BLE_AD_BIT_SERVICE_SOL (0x00000001 << 7) #define BTM_BLE_AD_BIT_SERVICE_DATA (0x00000001 << 8) #define BTM_BLE_AD_BIT_SIGN_DATA (0x00000001 << 9) #define BTM_BLE_AD_BIT_SERVICE_128SOL (0x00000001 << 10) #define BTM_BLE_AD_BIT_APPEARANCE (0x00000001 << 11) #define BTM_BLE_AD_BIT_PUBLIC_ADDR (0x00000001 << 12) #define BTM_BLE_AD_BIT_RANDOM_ADDR (0x00000001 << 13) #define BTM_BLE_AD_BIT_SERVICE_32 (0x00000001 << 4) #define BTM_BLE_AD_BIT_SERVICE_32SOL (0x00000001 << 14) #define BTM_BLE_AD_BIT_PROPRIETARY (0x00000001 << 15) #define BTM_BLE_AD_BIT_SERVICE_128 (0x00000001 << 16) /*128-bit Service UUIDs*/ typedef UINT32 tBTM_BLE_AD_MASK; /* relate to ESP_BLE_AD_TYPE_xxx in esp_gap_ble_api.h */ #define BTM_BLE_AD_TYPE_FLAG HCI_EIR_FLAGS_TYPE /* 0x01 */ #define BTM_BLE_AD_TYPE_16SRV_PART HCI_EIR_MORE_16BITS_UUID_TYPE /* 0x02 */ #define BTM_BLE_AD_TYPE_16SRV_CMPL HCI_EIR_COMPLETE_16BITS_UUID_TYPE /* 0x03 */ #define BTM_BLE_AD_TYPE_32SRV_PART HCI_EIR_MORE_32BITS_UUID_TYPE /* 0x04 */ #define BTM_BLE_AD_TYPE_32SRV_CMPL HCI_EIR_COMPLETE_32BITS_UUID_TYPE /* 0x05 */ #define BTM_BLE_AD_TYPE_128SRV_PART HCI_EIR_MORE_128BITS_UUID_TYPE /* 0x06 */ #define BTM_BLE_AD_TYPE_128SRV_CMPL HCI_EIR_COMPLETE_128BITS_UUID_TYPE /* 0x07 */ #define BTM_BLE_AD_TYPE_NAME_SHORT HCI_EIR_SHORTENED_LOCAL_NAME_TYPE /* 0x08 */ #define BTM_BLE_AD_TYPE_NAME_CMPL HCI_EIR_COMPLETE_LOCAL_NAME_TYPE /* 0x09 */ #define BTM_BLE_AD_TYPE_TX_PWR HCI_EIR_TX_POWER_LEVEL_TYPE /* 0x0A */ #define BTM_BLE_AD_TYPE_DEV_CLASS 0x0D #define BTM_BLE_AD_TYPE_SM_TK 0x10 #define BTM_BLE_AD_TYPE_SM_OOB_FLAG 0x11 #define BTM_BLE_AD_TYPE_INT_RANGE 0x12 #define BTM_BLE_AD_TYPE_SOL_SRV_UUID 0x14 #define BTM_BLE_AD_TYPE_128SOL_SRV_UUID 0x15 #define BTM_BLE_AD_TYPE_SERVICE_DATA 0x16 #define BTM_BLE_AD_TYPE_PUBLIC_TARGET 0x17 #define BTM_BLE_AD_TYPE_RANDOM_TARGET 0x18 #define BTM_BLE_AD_TYPE_APPEARANCE 0x19 #define BTM_BLE_AD_TYPE_ADV_INT 0x1a #define BTM_BLE_AD_TYPE_LE_DEV_ADDR 0x1b #define BTM_BLE_AD_TYPE_LE_ROLE 0x1c #define BTM_BLE_AD_TYPE_SPAIR_C256 0x1d #define BTM_BLE_AD_TYPE_SPAIR_R256 0x1e #define BTM_BLE_AD_TYPE_32SOL_SRV_UUID 0x1f #define BTM_BLE_AD_TYPE_32SERVICE_DATA 0x20 #define BTM_BLE_AD_TYPE_128SERVICE_DATA 0x21 #define BTM_BLE_AD_TYPE_LE_SECURE_CONFIRM 0x22 #define BTM_BLE_AD_TYPE_LE_SECURE_RANDOM 0x23 #define BTM_BLE_AD_TYPE_URI 0x24 #define BTM_BLE_AD_TYPE_INDOOR_POSITION 0x25 #define BTM_BLE_AD_TYPE_TRANS_DISC_DATA 0x26 #define BTM_BLE_AD_TYPE_LE_SUPPORT_FEATURE 0x27 #define BTM_BLE_AD_TYPE_CHAN_MAP_UPDATE 0x28 #define BTM_BLE_AD_TYPE_MANU HCI_EIR_MANUFACTURER_SPECIFIC_TYPE /* 0xff */ typedef UINT8 tBTM_BLE_AD_TYPE; /* Security settings used with L2CAP LE COC */ #define BTM_SEC_LE_LINK_ENCRYPTED 0x01 #define BTM_SEC_LE_LINK_PAIRED_WITHOUT_MITM 0x02 #define BTM_SEC_LE_LINK_PAIRED_WITH_MITM 0x04 /* Min/max Preferred number of payload octets that the local Controller should include in a single Link Layer Data Channel PDU. */ #define BTM_BLE_DATA_SIZE_MAX 0x00fb #define BTM_BLE_DATA_SIZE_MIN 0x001b /* Preferred maximum number of microseconds that the local Controller should use to transmit a single Link Layer Data Channel PDU. */ #define BTM_BLE_DATA_TX_TIME_MIN 0x0148 #define BTM_BLE_DATA_TX_TIME_MAX 0x0848 /* adv tx power level */ #define BTM_BLE_ADV_TX_POWER_MIN 0 /* minimum tx power */ #define BTM_BLE_ADV_TX_POWER_MAX 7 /* maximum tx power */ typedef UINT8 tBTM_BLE_ADV_TX_POWER; /* adv tx power in dBm */ typedef struct { UINT8 adv_inst_max; /* max adv instance supported in controller */ UINT8 rpa_offloading; UINT16 tot_scan_results_strg; UINT8 max_irk_list_sz; UINT8 filter_support; UINT8 max_filter; UINT8 energy_support; BOOLEAN values_read; UINT16 version_supported; UINT16 total_trackable_advertisers; UINT8 extended_scan_support; UINT8 debug_logging_supported; } tBTM_BLE_VSC_CB; /* slave preferred connection interval range */ typedef struct { UINT16 low; UINT16 hi; } tBTM_BLE_INT_RANGE; /* Service tag supported in the device */ typedef struct { UINT8 num_service; BOOLEAN list_cmpl; UINT16 *p_uuid; } tBTM_BLE_SERVICE; /* 32 bits Service supported in the device */ typedef struct { UINT8 num_service; BOOLEAN list_cmpl; UINT32 *p_uuid; } tBTM_BLE_32SERVICE; /* 128 bits Service supported in the device */ typedef struct { BOOLEAN list_cmpl; UINT8 uuid128[MAX_UUID_SIZE]; } tBTM_BLE_128SERVICE; typedef struct { UINT8 len; UINT8 *p_val; } tBTM_BLE_MANU; typedef struct { tBT_UUID service_uuid; UINT8 len; UINT8 *p_val; } tBTM_BLE_SERVICE_DATA; typedef struct { UINT8 adv_type; UINT8 len; UINT8 *p_val; /* number of len byte */ } tBTM_BLE_PROP_ELEM; typedef struct { UINT8 num_elem; tBTM_BLE_PROP_ELEM *p_elem; } tBTM_BLE_PROPRIETARY; typedef struct { tBTM_BLE_INT_RANGE int_range; /* slave prefered conn interval range */ tBTM_BLE_MANU *p_manu; /* manufactuer data */ tBTM_BLE_SERVICE *p_services; /* services */ tBTM_BLE_128SERVICE *p_services_128b; /* 128 bits service */ tBTM_BLE_32SERVICE *p_service_32b; /* 32 bits Service UUID */ tBTM_BLE_SERVICE *p_sol_services; /* 16 bits services Solicitation UUIDs */ tBTM_BLE_32SERVICE *p_sol_service_32b; /* List of 32 bit Service Solicitation UUIDs */ tBTM_BLE_128SERVICE *p_sol_service_128b; /* List of 128 bit Service Solicitation UUIDs */ tBTM_BLE_PROPRIETARY *p_proprietary; tBTM_BLE_SERVICE_DATA *p_service_data; /* service data */ UINT16 appearance; UINT8 flag; UINT8 tx_power; } tBTM_BLE_ADV_DATA; #ifndef BTM_BLE_MULTI_ADV_MAX #define BTM_BLE_MULTI_ADV_MAX 16 /* controller returned adv_inst_max should be less than this number */ #endif #define BTM_BLE_MULTI_ADV_INVALID 0 #define BTM_BLE_MULTI_ADV_ENB_EVT 1 #define BTM_BLE_MULTI_ADV_DISABLE_EVT 2 #define BTM_BLE_MULTI_ADV_PARAM_EVT 3 #define BTM_BLE_MULTI_ADV_DATA_EVT 4 typedef UINT8 tBTM_BLE_MULTI_ADV_EVT; #define BTM_BLE_MULTI_ADV_DEFAULT_STD 0 typedef struct { UINT16 adv_int_min; UINT16 adv_int_max; UINT8 adv_type; tBTM_BLE_ADV_CHNL_MAP channel_map; tBTM_BLE_AFP adv_filter_policy; tBTM_BLE_ADV_TX_POWER tx_power; } tBTM_BLE_ADV_PARAMS; typedef struct { UINT8 *p_sub_code; /* dynamic array to store sub code */ UINT8 *p_inst_id; /* dynamic array to store instance id */ UINT8 pending_idx; UINT8 next_idx; } tBTM_BLE_MULTI_ADV_OPQ; typedef void (tBTM_BLE_MULTI_ADV_CBACK)(tBTM_BLE_MULTI_ADV_EVT evt, UINT8 inst_id, void *p_ref, tBTM_STATUS status); typedef struct { UINT8 inst_id; BOOLEAN in_use; UINT8 adv_evt; BD_ADDR rpa; TIMER_LIST_ENT raddr_timer_ent; tBTM_BLE_MULTI_ADV_CBACK *p_cback; void *p_ref; UINT8 index; } tBTM_BLE_MULTI_ADV_INST; typedef struct { UINT8 inst_index_queue[BTM_BLE_MULTI_ADV_MAX]; int front; int rear; } tBTM_BLE_MULTI_ADV_INST_IDX_Q; typedef struct { tBTM_BLE_MULTI_ADV_INST *p_adv_inst; /* dynamic array to store adv instance */ tBTM_BLE_MULTI_ADV_OPQ op_q; } tBTM_BLE_MULTI_ADV_CB; typedef UINT8 tGATT_IF; typedef void (tBTM_BLE_SCAN_THRESHOLD_CBACK)(tBTM_BLE_REF_VALUE ref_value); typedef void (tBTM_BLE_SCAN_REP_CBACK)(tBTM_BLE_REF_VALUE ref_value, UINT8 report_format, UINT8 num_records, UINT16 total_len, UINT8 *p_rep_data, UINT8 status); typedef void (tBTM_BLE_SCAN_SETUP_CBACK)(UINT8 evt, tBTM_BLE_REF_VALUE ref_value, UINT8 status); #ifndef BTM_BLE_BATCH_SCAN_MAX #define BTM_BLE_BATCH_SCAN_MAX 5 #endif #ifndef BTM_BLE_BATCH_REP_MAIN_Q_SIZE #define BTM_BLE_BATCH_REP_MAIN_Q_SIZE 2 #endif typedef enum { BTM_BLE_SCAN_INVALID_STATE = 0, BTM_BLE_SCAN_ENABLE_CALLED = 1, BTM_BLE_SCAN_ENABLED_STATE = 2, BTM_BLE_SCAN_DISABLE_CALLED = 3, BTM_BLE_SCAN_DISABLED_STATE = 4 } tBTM_BLE_BATCH_SCAN_STATE; enum { BTM_BLE_DISCARD_OLD_ITEMS, BTM_BLE_DISCARD_LOWER_RSSI_ITEMS }; typedef UINT8 tBTM_BLE_DISCARD_RULE; typedef struct { UINT8 sub_code[BTM_BLE_BATCH_SCAN_MAX]; tBTM_BLE_BATCH_SCAN_STATE cur_state[BTM_BLE_BATCH_SCAN_MAX]; tBTM_BLE_REF_VALUE ref_value[BTM_BLE_BATCH_SCAN_MAX]; UINT8 pending_idx; UINT8 next_idx; } tBTM_BLE_BATCH_SCAN_OPQ; typedef struct { UINT8 rep_mode[BTM_BLE_BATCH_REP_MAIN_Q_SIZE]; tBTM_BLE_REF_VALUE ref_value[BTM_BLE_BATCH_REP_MAIN_Q_SIZE]; UINT8 num_records[BTM_BLE_BATCH_REP_MAIN_Q_SIZE]; UINT16 data_len[BTM_BLE_BATCH_REP_MAIN_Q_SIZE]; UINT8 *p_data[BTM_BLE_BATCH_REP_MAIN_Q_SIZE]; UINT8 pending_idx; UINT8 next_idx; } tBTM_BLE_BATCH_SCAN_REP_Q; typedef struct { tBTM_BLE_BATCH_SCAN_STATE cur_state; tBTM_BLE_BATCH_SCAN_MODE scan_mode; UINT32 scan_interval; UINT32 scan_window; tBLE_ADDR_TYPE addr_type; tBTM_BLE_DISCARD_RULE discard_rule; tBTM_BLE_BATCH_SCAN_OPQ op_q; tBTM_BLE_BATCH_SCAN_REP_Q main_rep_q; tBTM_BLE_SCAN_SETUP_CBACK *p_setup_cback; tBTM_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback; tBTM_BLE_SCAN_REP_CBACK *p_scan_rep_cback; tBTM_BLE_REF_VALUE ref_value; } tBTM_BLE_BATCH_SCAN_CB; /// Ble scan duplicate type enum { BTM_BLE_SCAN_DUPLICATE_DISABLE = 0x0, /*!< the Link Layer should generate advertising reports to the host for each packet received */ BTM_BLE_SCAN_DUPLICATE_ENABLE = 0x1, /*!< the Link Layer should filter out duplicate advertising reports to the Host */ BTM_BLE_SCAN_DUPLICATE_MAX = 0x2, /*!< 0x02 – 0xFF, Reserved for future use */ }; /* filter selection bit index */ #define BTM_BLE_PF_ADDR_FILTER 0 #define BTM_BLE_PF_SRVC_DATA 1 #define BTM_BLE_PF_SRVC_UUID 2 #define BTM_BLE_PF_SRVC_SOL_UUID 3 #define BTM_BLE_PF_LOCAL_NAME 4 #define BTM_BLE_PF_MANU_DATA 5 #define BTM_BLE_PF_SRVC_DATA_PATTERN 6 #define BTM_BLE_PF_TYPE_ALL 7 /* when passed in payload filter type all, only clear action is applicable */ #define BTM_BLE_PF_TYPE_MAX 8 /* max number of filter spot for different filter type */ #ifndef BTM_BLE_MAX_UUID_FILTER #define BTM_BLE_MAX_UUID_FILTER 8 #endif #ifndef BTM_BLE_MAX_ADDR_FILTER #define BTM_BLE_MAX_ADDR_FILTER 8 #endif #ifndef BTM_BLE_PF_STR_COND_MAX #define BTM_BLE_PF_STR_COND_MAX 4 /* apply to manu data , or local name */ #endif #ifndef BTM_BLE_PF_STR_LEN_MAX #define BTM_BLE_PF_STR_LEN_MAX 29 /* match for first 29 bytes */ #endif typedef UINT8 tBTM_BLE_PF_COND_TYPE; #define BTM_BLE_PF_LOGIC_OR 0 #define BTM_BLE_PF_LOGIC_AND 1 typedef UINT8 tBTM_BLE_PF_LOGIC_TYPE; #define BTM_BLE_PF_ENABLE 1 #define BTM_BLE_PF_CONFIG 2 typedef UINT8 tBTM_BLE_PF_ACTION; typedef UINT8 tBTM_BLE_PF_FILT_INDEX; typedef UINT8 tBTM_BLE_PF_AVBL_SPACE; #define BTM_BLE_PF_BRDCAST_ADDR_FILT 1 #define BTM_BLE_PF_SERV_DATA_CHG_FILT 2 #define BTM_BLE_PF_SERV_UUID 4 #define BTM_BLE_PF_SERV_SOLC_UUID 8 #define BTM_BLE_PF_LOC_NAME_CHECK 16 #define BTM_BLE_PF_MANUF_NAME_CHECK 32 #define BTM_BLE_PF_SERV_DATA_CHECK 64 typedef UINT16 tBTM_BLE_PF_FEAT_SEL; #define BTM_BLE_PF_LIST_LOGIC_OR 1 #define BTM_BLE_PF_LIST_LOGIC_AND 2 typedef UINT16 tBTM_BLE_PF_LIST_LOGIC_TYPE; #define BTM_BLE_PF_FILT_LOGIC_OR 0 #define BTM_BLE_PF_FILT_LOGIC_AND 1 typedef UINT16 tBTM_BLE_PF_FILT_LOGIC_TYPE; typedef UINT8 tBTM_BLE_PF_RSSI_THRESHOLD; typedef UINT8 tBTM_BLE_PF_DELIVERY_MODE; typedef UINT16 tBTM_BLE_PF_TIMEOUT; typedef UINT8 tBTM_BLE_PF_TIMEOUT_CNT; typedef UINT16 tBTM_BLE_PF_ADV_TRACK_ENTRIES; typedef struct { tBTM_BLE_PF_FEAT_SEL feat_seln; tBTM_BLE_PF_LIST_LOGIC_TYPE logic_type; tBTM_BLE_PF_FILT_LOGIC_TYPE filt_logic_type; tBTM_BLE_PF_RSSI_THRESHOLD rssi_high_thres; tBTM_BLE_PF_RSSI_THRESHOLD rssi_low_thres; tBTM_BLE_PF_DELIVERY_MODE dely_mode; tBTM_BLE_PF_TIMEOUT found_timeout; tBTM_BLE_PF_TIMEOUT lost_timeout; tBTM_BLE_PF_TIMEOUT_CNT found_timeout_cnt; tBTM_BLE_PF_ADV_TRACK_ENTRIES num_of_tracking_entries; } tBTM_BLE_PF_FILT_PARAMS; enum { BTM_BLE_SCAN_COND_ADD, BTM_BLE_SCAN_COND_DELETE, BTM_BLE_SCAN_COND_CLEAR = 2 }; typedef UINT8 tBTM_BLE_SCAN_COND_OP; enum { BTM_BLE_FILT_ENABLE_DISABLE = 1, BTM_BLE_FILT_CFG = 2, BTM_BLE_FILT_ADV_PARAM = 3 }; typedef UINT8 tBTM_BLE_FILT_CB_EVT; /* BLE adv payload filtering config complete callback */ typedef void (tBTM_BLE_PF_CFG_CBACK)(tBTM_BLE_PF_ACTION action, tBTM_BLE_SCAN_COND_OP cfg_op, tBTM_BLE_PF_AVBL_SPACE avbl_space, tBTM_STATUS status, tBTM_BLE_REF_VALUE ref_value); typedef void (tBTM_BLE_PF_CMPL_CBACK) (tBTM_BLE_PF_CFG_CBACK); /* BLE adv payload filtering status setup complete callback */ typedef void (tBTM_BLE_PF_STATUS_CBACK) (UINT8 action, tBTM_STATUS status, tBTM_BLE_REF_VALUE ref_value); /* BLE adv payload filtering param setup complete callback */ typedef void (tBTM_BLE_PF_PARAM_CBACK) (tBTM_BLE_PF_ACTION action_type, tBTM_BLE_PF_AVBL_SPACE avbl_space, tBTM_BLE_REF_VALUE ref_value, tBTM_STATUS status); typedef union { UINT16 uuid16_mask; UINT32 uuid32_mask; UINT8 uuid128_mask[LEN_UUID_128]; } tBTM_BLE_PF_COND_MASK; typedef struct { tBLE_BD_ADDR *p_target_addr; /* target address, if NULL, generic UUID filter */ tBT_UUID uuid; /* UUID condition */ tBTM_BLE_PF_LOGIC_TYPE cond_logic; /* AND/OR */ tBTM_BLE_PF_COND_MASK *p_uuid_mask; /* UUID mask */ } tBTM_BLE_PF_UUID_COND; typedef struct { UINT8 data_len; /* <= 20 bytes */ UINT8 *p_data; } tBTM_BLE_PF_LOCAL_NAME_COND; typedef struct { UINT16 company_id; /* company ID */ UINT8 data_len; /* <= 20 bytes */ UINT8 *p_pattern; UINT16 company_id_mask; /* UUID value mask */ UINT8 *p_pattern_mask; /* Manufacturer data matching mask, same length as data pattern, set to all 0xff, match exact data */ } tBTM_BLE_PF_MANU_COND; typedef struct { UINT16 uuid; /* service ID */ UINT8 data_len; /* <= 20 bytes */ UINT8 *p_pattern; UINT8 *p_pattern_mask; /* Service data matching mask, same length as data pattern, set to all 0xff, match exact data */ } tBTM_BLE_PF_SRVC_PATTERN_COND; typedef union { tBLE_BD_ADDR target_addr; tBTM_BLE_PF_LOCAL_NAME_COND local_name; /* lcoal name filtering */ tBTM_BLE_PF_MANU_COND manu_data; /* manufactuer data filtering */ tBTM_BLE_PF_UUID_COND srvc_uuid; /* service UUID filtering */ tBTM_BLE_PF_UUID_COND solicitate_uuid; /* solicitated service UUID filtering */ tBTM_BLE_PF_SRVC_PATTERN_COND srvc_data; /* service data pattern */ } tBTM_BLE_PF_COND_PARAM; typedef struct { UINT8 action_ocf[BTM_BLE_PF_TYPE_MAX]; tBTM_BLE_REF_VALUE ref_value[BTM_BLE_PF_TYPE_MAX]; tBTM_BLE_PF_PARAM_CBACK *p_filt_param_cback[BTM_BLE_PF_TYPE_MAX]; tBTM_BLE_PF_CFG_CBACK *p_scan_cfg_cback[BTM_BLE_PF_TYPE_MAX]; UINT8 cb_evt[BTM_BLE_PF_TYPE_MAX]; UINT8 pending_idx; UINT8 next_idx; } tBTM_BLE_ADV_FILTER_ADV_OPQ; #define BTM_BLE_MAX_FILTER_COUNTER (BTM_BLE_MAX_ADDR_FILTER + 1) /* per device filter + one generic filter indexed by 0 */ #ifndef BTM_CS_IRK_LIST_MAX #define BTM_CS_IRK_LIST_MAX 0x20 #endif typedef struct { BOOLEAN in_use; BD_ADDR bd_addr; UINT8 pf_counter[BTM_BLE_PF_TYPE_MAX]; /* number of filter indexed by tBTM_BLE_PF_COND_TYPE */ } tBTM_BLE_PF_COUNT; typedef struct { BOOLEAN enable; UINT8 op_type; tBTM_BLE_PF_COUNT *p_addr_filter_count; /* per BDA filter array */ tBLE_BD_ADDR cur_filter_target; tBTM_BLE_PF_STATUS_CBACK *p_filt_stat_cback; tBTM_BLE_ADV_FILTER_ADV_OPQ op_q; } tBTM_BLE_ADV_FILTER_CB; /* Sub codes */ #define BTM_BLE_META_PF_ENABLE 0x00 #define BTM_BLE_META_PF_FEAT_SEL 0x01 #define BTM_BLE_META_PF_ADDR 0x02 #define BTM_BLE_META_PF_UUID 0x03 #define BTM_BLE_META_PF_SOL_UUID 0x04 #define BTM_BLE_META_PF_LOCAL_NAME 0x05 #define BTM_BLE_META_PF_MANU_DATA 0x06 #define BTM_BLE_META_PF_SRVC_DATA 0x07 #define BTM_BLE_META_PF_ALL 0x08 typedef UINT8 BTM_BLE_ADV_STATE; typedef UINT8 BTM_BLE_ADV_INFO_PRESENT; typedef UINT8 BTM_BLE_RSSI_VALUE; typedef UINT16 BTM_BLE_ADV_INFO_TIMESTAMP; /* These are the fields returned in each device adv packet. It ** is returned in the results callback if registered. */ typedef struct { UINT8 conn_mode; tBTM_BLE_AD_MASK ad_mask; /* mask of the valid adv data field */ UINT8 flag; UINT8 tx_power_level; UINT8 remote_name_len; UINT8 *p_remote_name; tBTM_BLE_SERVICE service; } tBTM_BLE_INQ_DATA; enum { BTM_BLE_CONN_NONE, BTM_BLE_CONN_AUTO, BTM_BLE_CONN_SELECTIVE }; typedef UINT8 tBTM_BLE_CONN_TYPE; #define ADV_INFO_PRESENT 0x00 #define NO_ADV_INFO_PRESENT 0x01 typedef btgatt_track_adv_info_t tBTM_BLE_TRACK_ADV_DATA; typedef void (tBTM_BLE_TRACK_ADV_CBACK)(tBTM_BLE_TRACK_ADV_DATA *p_track_adv_data); typedef UINT8 tBTM_BLE_TRACK_ADV_EVT; typedef struct { tBTM_BLE_REF_VALUE ref_value; tBTM_BLE_TRACK_ADV_CBACK *p_track_cback; } tBTM_BLE_ADV_TRACK_CB; enum { BTM_BLE_TRACK_ADV_ADD, BTM_BLE_TRACK_ADV_REMOVE }; typedef UINT8 tBTM_BLE_TRACK_ADV_ACTION; #define BTM_BLE_MULTI_ADV_INVALID 0 #define BTM_BLE_BATCH_SCAN_ENABLE_EVT 1 #define BTM_BLE_BATCH_SCAN_CFG_STRG_EVT 2 #define BTM_BLE_BATCH_SCAN_READ_REPTS_EVT 3 #define BTM_BLE_BATCH_SCAN_THR_EVT 4 #define BTM_BLE_BATCH_SCAN_PARAM_EVT 5 #define BTM_BLE_BATCH_SCAN_DISABLE_EVT 6 typedef UINT8 tBTM_BLE_BATCH_SCAN_EVT; typedef UINT32 tBTM_BLE_TX_TIME_MS; typedef UINT32 tBTM_BLE_RX_TIME_MS; typedef UINT32 tBTM_BLE_IDLE_TIME_MS; typedef UINT32 tBTM_BLE_ENERGY_USED; typedef void (tBTM_BLE_ENERGY_INFO_CBACK)(tBTM_BLE_TX_TIME_MS tx_time, tBTM_BLE_RX_TIME_MS rx_time, tBTM_BLE_IDLE_TIME_MS idle_time, tBTM_BLE_ENERGY_USED energy_used, tBTM_STATUS status); typedef struct { tBTM_BLE_ENERGY_INFO_CBACK *p_ener_cback; } tBTM_BLE_ENERGY_INFO_CB; typedef BOOLEAN (tBTM_BLE_SEL_CBACK)(BD_ADDR random_bda, UINT8 *p_remote_name); typedef void (tBTM_BLE_CTRL_FEATURES_CBACK)(tBTM_STATUS status); /* callback function for SMP signing algorithm, signed data in little endian order with tlen bits long */ typedef void (tBTM_BLE_SIGN_CBACK)(void *p_ref_data, UINT8 *p_signing_data); typedef void (tBTM_BLE_VERIFY_CBACK)(void *p_ref_data, BOOLEAN match); /* random address set complete callback */ typedef void (tBTM_BLE_RANDOM_SET_CBACK) (BD_ADDR random_bda); typedef void (tBTM_BLE_SCAN_REQ_CBACK)(BD_ADDR remote_bda, tBLE_ADDR_TYPE addr_type, UINT8 adv_evt); typedef void (*tBLE_SCAN_PARAM_SETUP_CBACK)(tGATT_IF client_if, tBTM_STATUS status); tBTM_BLE_SCAN_SETUP_CBACK bta_ble_scan_setup_cb; typedef void (tBTM_START_ADV_CMPL_CBACK) (UINT8 status); typedef void (tBTM_START_STOP_ADV_CMPL_CBACK) (UINT8 status); /***************************************************************************** ** EXTERNAL FUNCTION DECLARATIONS *****************************************************************************/ /* #ifdef __cplusplus extern "C" { #endif */ /******************************************************************************* ** ** Function BTM_BleRegiseterConnParamCallback ** ** Description register connection parameters update callback func ** ** Parameters: update_conn_param_cb ** ** Returns void ** *******************************************************************************/ void BTM_BleRegiseterConnParamCallback(tBTM_UPDATE_CONN_PARAM_CBACK *update_conn_param_cb); /******************************************************************************* ** ** Function BTM_SecAddBleDevice ** ** Description Add/modify device. This function will be normally called ** during host startup to restore all required information ** for a LE device stored in the NVRAM. ** ** Parameters: bd_addr - BD address of the peer ** bd_name - Name of the peer device. NULL if unknown. ** dev_type - Remote device's device type. ** addr_type - LE device address type. ** ** Returns TRUE if added OK, else FALSE ** *******************************************************************************/ //extern BOOLEAN BTM_SecAddBleDevice (BD_ADDR bd_addr, BD_NAME bd_name, tBT_DEVICE_TYPE dev_type, tBLE_ADDR_TYPE addr_type); /******************************************************************************* ** ** Function BTM_SecAddBleKey ** ** Description Add/modify LE device information. This function will be ** normally called during host startup to restore all required ** information stored in the NVRAM. ** ** Parameters: bd_addr - BD address of the peer ** p_le_key - LE key values. ** key_type - LE SMP key type. * ** Returns TRUE if added OK, else FALSE ** *******************************************************************************/ //extern BOOLEAN BTM_SecAddBleKey (BD_ADDR bd_addr, tBTM_LE_KEY_VALUE *p_le_key, tBTM_LE_KEY_TYPE key_type); /******************************************************************************* ** ** Function BTM_BleSetAdvParams ** ** Description This function is called to set advertising parameters. ** ** Parameters: None. ** ** Returns void ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleSetAdvParams(UINT16 adv_int_min, UINT16 adv_int_max, tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP chnl_map); /******************************************************************************* ** ** Function BTM_BleSetAdvParamsStartAdv ** ** Description This function is called to set all of the advertising parameters. ** ** Parameters: None. ** ** Returns void ** *******************************************************************************/ tBTM_STATUS BTM_BleSetAdvParamsStartAdv(UINT16 adv_int_min, UINT16 adv_int_max, UINT8 adv_type, tBLE_ADDR_TYPE own_bda_type, tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP chnl_map, tBTM_BLE_AFP afp, tBTM_START_ADV_CMPL_CBACK *adv_cb); /******************************************************************************* ** ** Function BTM_BleWriteAdvData ** ** Description This function is called to write advertising data. ** ** Parameters: None. ** ** Returns void ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleWriteAdvData(tBTM_BLE_AD_MASK data_mask, tBTM_BLE_ADV_DATA *p_data); /******************************************************************************* ** ** Function BTM_BleWriteAdvDataRaw ** ** Description This function is called to write raw advertising data. ** ** Parameters: p_raw_adv : point to raw advertising data ** raw_adv_len : raw advertising data ** ** Returns BTM_SUCCESS means success. ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleWriteAdvDataRaw(UINT8 *p_raw_adv, UINT32 raw_adv_len); tBTM_STATUS BTM_BleSetRandAddress(BD_ADDR rand_addr); /******************************************************************************* ** ** Function BTM_BleSetAdvParams ** ** Description This function is called to set advertising parameters. ** ** Parameters adv_int_min: minimum advertising interval ** adv_int_max: maximum advertising interval ** p_dir_bda: connectable direct initiator's LE device address ** chnl_map: advertising channel map. ** ** Returns void ** *******************************************************************************/ //extern void BTM_BleReadAdvParams (UINT16 *adv_int_min, UINT16 *adv_int_max, tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP *p_chnl_map); /******************************************************************************* ** ** Function BTM_BleObtainVendorCapabilities ** ** Description This function is called to obatin vendor capabilties ** ** Parameters p_cmn_vsc_cb - Returns the vednor capabilities ** ** Returns void ** *******************************************************************************/ //extern void BTM_BleObtainVendorCapabilities(tBTM_BLE_VSC_CB *p_cmn_vsc_cb); /******************************************************************************* ** ** Function BTM_BleSetScanParams ** ** Description This function is called to set Scan parameters. ** ** Parameters client_if - Client IF value ** scan_interval - Scan interval ** scan_window - Scan window ** scan_type - Scan type ** scan_setup_status_cback - Scan setup status callback ** ** Returns void ** *******************************************************************************/ //extern void BTM_BleSetScanParams(tGATT_IF client_if, UINT32 scan_interval, UINT32 scan_window, tBLE_SCAN_MODE scan_type, tBLE_SCAN_PARAM_SETUP_CBACK scan_setup_status_cback); /******************************************************************************* ** ** Function BTM_BleSetScanFilterParams ** ** Description This function is called to set Scan Filter & parameters. ** ** Parameters client_if - Client IF value ** scan_interval - Scan interval ** scan_window - Scan window ** scan_type - Scan type ** addr_type_own - owner address type ** scan_duplicate_filter - scan duplicate filter ** scan_filter_policy - scan filter policy ** scan_setup_status_cback - Scan setup status callback ** ** Returns void ** *******************************************************************************/ void BTM_BleSetScanFilterParams(tGATT_IF client_if, UINT32 scan_interval, UINT32 scan_window, tBLE_SCAN_MODE scan_mode, UINT8 addr_type_own, UINT8 scan_duplicate_filter, tBTM_BLE_SFP scan_filter_policy, tBLE_SCAN_PARAM_SETUP_CBACK scan_setup_status_cback); /******************************************************************************* ** ** Function BTM_BleGetVendorCapabilities ** ** Description This function reads local LE features ** ** Parameters p_cmn_vsc_cb : Locala LE capability structure ** ** Returns void ** *******************************************************************************/ //extern void BTM_BleGetVendorCapabilities(tBTM_BLE_VSC_CB *p_cmn_vsc_cb); /******************************************************************************* ** ** Function BTM_BleSetStorageConfig ** ** Description This function is called to setup storage configuration and setup callbacks. ** ** Parameters UINT8 batch_scan_full_max -Batch scan full maximum UINT8 batch_scan_trunc_max - Batch scan truncated value maximum UINT8 batch_scan_notify_threshold - Threshold value tBTM_BLE_SCAN_SETUP_CBACK *p_setup_cback - Setup callback tBTM_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback -Threshold callback void *p_ref - Reference value ** ** Returns tBTM_STATUS ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleSetStorageConfig(UINT8 batch_scan_full_max, UINT8 batch_scan_trunc_max, UINT8 batch_scan_notify_threshold, tBTM_BLE_SCAN_SETUP_CBACK *p_setup_cback, tBTM_BLE_SCAN_THRESHOLD_CBACK *p_thres_cback, tBTM_BLE_SCAN_REP_CBACK *p_cback, tBTM_BLE_REF_VALUE ref_value); /******************************************************************************* ** ** Function BTM_BleEnableBatchScan ** ** Description This function is called to enable batch scan ** ** Parameters tBTM_BLE_BATCH_SCAN_MODE scan_mode - Batch scan mode UINT32 scan_interval -Scan interval UINT32 scan_window - Scan window value tBLE_ADDR_TYPE addr_type - Address type tBTM_BLE_DISCARD_RULE discard_rule - Data discard rules ** ** Returns tBTM_STATUS ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleEnableBatchScan(tBTM_BLE_BATCH_SCAN_MODE scan_mode, UINT32 scan_interval, UINT32 scan_window, tBTM_BLE_DISCARD_RULE discard_rule, tBLE_ADDR_TYPE addr_type, tBTM_BLE_REF_VALUE ref_value); /******************************************************************************* ** ** Function BTM_BleDisableBatchScan ** ** Description This function is called to disable batch scanning ** ** Parameters void ** ** Returns void ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleDisableBatchScan(tBTM_BLE_REF_VALUE ref_value); /******************************************************************************* ** ** Function BTM_BleReadScanReports ** ** Description This function is called to read batch scan reports ** ** Parameters tBLE_SCAN_MODE scan_mode - Scan mode report to be read out tBTM_BLE_SCAN_REP_CBACK* p_cback - Reports callback ** ** Returns tBTM_STATUS ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleReadScanReports(tBLE_SCAN_MODE scan_mode, tBTM_BLE_REF_VALUE ref_value); /******************************************************************************* ** ** Function BTM_BleTrackAdvertiser ** ** Description This function is called to read batch scan reports ** ** Parameters p_track_cback - Tracking callback ** ref_value - Reference value ** ** Returns tBTM_STATUS ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleTrackAdvertiser(tBTM_BLE_TRACK_ADV_CBACK *p_track_cback, tBTM_BLE_REF_VALUE ref_value); /******************************************************************************* ** ** Function BTM_BleWriteScanRsp ** ** Description This function is called to write LE scan response. ** ** Parameters: p_scan_rsp: scan response. ** ** Returns status ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleWriteScanRsp(tBTM_BLE_AD_MASK data_mask, tBTM_BLE_ADV_DATA *p_data); /******************************************************************************* ** ** Function BTM_BleWriteScanRspRaw ** ** Description This function is called to write raw scan response data ** ** Parameters: None. ** ** Returns void ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleWriteScanRspRaw(UINT8 *p_raw_scan_rsp, UINT32 raw_scan_rsp_len); /******************************************************************************* ** ** Function BTM_BleObserve ** ** Description This procedure keep the device listening for advertising ** events from a broadcast device. ** ** Parameters start: start or stop observe. ** ** Returns void ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleObserve(BOOLEAN start, UINT32 duration, tBTM_INQ_RESULTS_CB *p_results_cb, tBTM_CMPL_CB *p_cmpl_cb); /******************************************************************************* ** ** Function BTM_BleScan ** ** Description This procedure keep the device listening for advertising ** events from a broadcast device. ** ** Parameters start: start or stop scan. ** ** Returns void ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleScan(BOOLEAN start, UINT32 duration, tBTM_INQ_RESULTS_CB *p_results_cb, tBTM_CMPL_CB *p_cmpl_cb); /******************************************************************************* ** ** Function BTM_GetDeviceIDRoot ** ** Description This function is called to read the local device identity ** root. ** ** Returns void ** the local device ER is copied into er ** *******************************************************************************/ //extern void BTM_GetDeviceIDRoot (BT_OCTET16 ir); /******************************************************************************* ** ** Function BTM_GetDeviceEncRoot ** ** Description This function is called to read the local device encryption ** root. ** ** Returns void ** the local device ER is copied into er ** *******************************************************************************/ //extern void BTM_GetDeviceEncRoot (BT_OCTET16 er); /******************************************************************************* ** ** Function BTM_GetDeviceDHK ** ** Description This function is called to read the local device DHK. ** ** Returns void ** the local device DHK is copied into dhk ** *******************************************************************************/ //extern void BTM_GetDeviceDHK (BT_OCTET16 dhk); /******************************************************************************* ** ** Function BTM_SecurityGrant ** ** Description This function is called to grant security process. ** ** Parameters bd_addr - peer device bd address. ** res - result of the operation BTM_SUCCESS if success. ** Otherwise, BTM_REPEATED_ATTEMPTS is too many attempts. ** ** Returns None ** *******************************************************************************/ //extern void BTM_SecurityGrant(BD_ADDR bd_addr, UINT8 res); /******************************************************************************* ** ** Function BTM_BlePasskeyReply ** ** Description This function is called after Security Manager submitted ** passkey request to the application. ** ** Parameters: bd_addr - Address of the device for which passkey was requested ** res - result of the operation SMP_SUCCESS if success ** passkey - numeric value in the range of ** BTM_MIN_PASSKEY_VAL(0) - BTM_MAX_PASSKEY_VAL(999999(0xF423F)). ** *******************************************************************************/ //extern void BTM_BlePasskeyReply (BD_ADDR bd_addr, UINT8 res, UINT32 passkey); /******************************************************************************* ** ** Function BTM_BleSetStaticPasskey ** ** Description This function is called to set static passkey ** ** ** Parameters: add - set static passkey when add is TRUE ** clear static passkey when add is FALSE ** passkey - static passkey ** ** *******************************************************************************/ void BTM_BleSetStaticPasskey(BOOLEAN add, UINT32 passkey); /******************************************************************************* ** ** Function BTM_BleConfirmReply ** ** Description This function is called after Security Manager submitted ** numeric comparison request to the application. ** ** Parameters: bd_addr - Address of the device with which numeric ** comparison was requested ** res - comparison result BTM_SUCCESS if success ** *******************************************************************************/ //extern void BTM_BleConfirmReply (BD_ADDR bd_addr, UINT8 res); /******************************************************************************* ** ** Function BTM_LeOobDataReply ** ** Description This function is called to provide the OOB data for ** SMP in response to BTM_LE_OOB_REQ_EVT ** ** Parameters: bd_addr - Address of the peer device ** res - result of the operation SMP_SUCCESS if success ** p_data - simple pairing Randomizer C. ** *******************************************************************************/ //extern void BTM_BleOobDataReply(BD_ADDR bd_addr, UINT8 res, UINT8 len, UINT8 *p_data); /******************************************************************************* ** ** Function BTM_BleDataSignature ** ** Description This function is called to sign the data using AES128 CMAC ** algorith. ** ** Parameter bd_addr: target device the data to be signed for. ** p_text: singing data ** len: length of the signing data ** signature: output parameter where data signature is going to ** be stored. ** ** Returns TRUE if signing sucessul, otherwise FALSE. ** *******************************************************************************/ //extern BOOLEAN BTM_BleDataSignature (BD_ADDR bd_addr, UINT8 *p_text, UINT16 len, BLE_SIGNATURE signature); /******************************************************************************* ** ** Function BTM_BleVerifySignature ** ** Description This function is called to verify the data signature ** ** Parameter bd_addr: target device the data to be signed for. ** p_orig: original data before signature. ** len: length of the signing data ** counter: counter used when doing data signing ** p_comp: signature to be compared against. ** Returns TRUE if signature verified correctly; otherwise FALSE. ** *******************************************************************************/ //extern BOOLEAN BTM_BleVerifySignature (BD_ADDR bd_addr, UINT8 *p_orig, UINT16 len, UINT32 counter, UINT8 *p_comp); /******************************************************************************* ** ** Function BTM_ReadConnectionAddr ** ** Description This function is called to set the local device random address ** . ** ** Returns void ** *******************************************************************************/ //extern void BTM_ReadConnectionAddr (BD_ADDR remote_bda, BD_ADDR local_conn_addr, tBLE_ADDR_TYPE *p_addr_type); /******************************************************************************* ** ** Function BTM_ReadRemoteConnectionAddr ** ** Description This function is read the remote device address currently used ** . ** ** Returns void ** *******************************************************************************/ //extern BOOLEAN BTM_ReadRemoteConnectionAddr(BD_ADDR pseudo_addr, BD_ADDR conn_addr, tBLE_ADDR_TYPE *p_addr_type); /******************************************************************************* ** ** Function BTM_BleLoadLocalKeys ** ** Description Local local identity key, encryption root or sign counter. ** ** Parameters: key_type: type of key, can be BTM_BLE_KEY_TYPE_ID, BTM_BLE_KEY_TYPE_ER ** or BTM_BLE_KEY_TYPE_COUNTER. ** p_key: pointer to the key. * ** Returns non2. ** *******************************************************************************/ //extern void BTM_BleLoadLocalKeys(UINT8 key_type, tBTM_BLE_LOCAL_KEYS *p_key); /******************************************************************************* ** ** Function BTM_BleSetBgConnType ** ** Description This function is called to set BLE background connection ** procedure type. It can be auto connection, or selective connection. ** ** Parameters conn_type: it can be auto connection, or selective connection. ** p_select_cback: callback function when selective connection procedure ** is being used. ** ** Returns void ** *******************************************************************************/ //extern BOOLEAN BTM_BleSetBgConnType(tBTM_BLE_CONN_TYPE conn_type, tBTM_BLE_SEL_CBACK *p_select_cback); /******************************************************************************* ** ** Function BTM_BleUpdateBgConnDev ** ** Description This function is called to add or remove a device into/from ** background connection procedure. The background connection * procedure is decided by the background connection type, it can be * auto connection, or selective connection. ** ** Parameters add_remove: TRUE to add; FALSE to remove. ** remote_bda: device address to add/remove. ** ** Returns void ** *******************************************************************************/ //extern BOOLEAN BTM_BleUpdateBgConnDev(BOOLEAN add_remove, BD_ADDR remote_bda); /******************************************************************************* ** ** Function BTM_BleClearBgConnDev ** ** Description This function is called to clear the whitelist, ** end any pending whitelist connections, * and reset the local bg device list. ** ** Parameters void ** ** Returns void ** *******************************************************************************/ //extern void BTM_BleClearBgConnDev(void); /******************************************************** ** ** Function BTM_BleSetPrefConnParams ** ** Description Set a peripheral's preferred connection parameters. When ** any of the value does not want to be updated while others ** do, use BTM_BLE_CONN_PARAM_UNDEF for the ones want to ** leave untouched. ** ** Parameters: bd_addr - BD address of the peripheral ** min_conn_int - minimum preferred connection interval ** max_conn_int - maximum preferred connection interval ** slave_latency - preferred slave latency ** supervision_tout - preferred supervision timeout ** ** Returns void ** *******************************************************************************/ //extern void BTM_BleSetPrefConnParams (BD_ADDR bd_addr, UINT16 min_conn_int, UINT16 max_conn_int, UINT16 slave_latency, UINT16 supervision_tout); /****************************************************************************** ** ** Function BTM_BleSetConnScanParams ** ** Description Set scan parameters used in BLE connection request ** ** Parameters: scan_interval - scan interval ** scan_window - scan window ** ** Returns void ** *******************************************************************************/ //extern void BTM_BleSetConnScanParams (UINT32 scan_interval, UINT32 scan_window); /****************************************************************************** ** ** Function BTM_BleReadControllerFeatures ** ** Description Reads BLE specific controller features ** ** Parameters: tBTM_BLE_CTRL_FEATURES_CBACK : Callback to notify when features are read ** ** Returns void ** *******************************************************************************/ //extern void BTM_BleReadControllerFeatures(tBTM_BLE_CTRL_FEATURES_CBACK *p_vsc_cback); /******************************************************************************* ** ** Function BTM_CheckAdvData ** ** Description This function is called to get ADV data for a specific type. ** ** Parameters p_adv - pointer of ADV data ** type - finding ADV data type ** p_length - return the length of ADV data not including type ** ** Returns pointer of ADV data ** *******************************************************************************/ //extern UINT8 *BTM_CheckAdvData( UINT8 *p_adv, UINT8 type, UINT8 *p_length); /******************************************************************************* ** ** Function BTM_BleGetCurrentAddress ** ** Description This function is called to get local used BLE address. ** ** Parameters: None. ** ** Returns success or fail ** *******************************************************************************/ BOOLEAN BTM_BleGetCurrentAddress(BD_ADDR addr, uint8_t *addr_type); /******************************************************************************* ** ** Function BTM__BLEReadDiscoverability ** ** Description This function is called to read the current LE discoverability ** mode of the device. ** ** Returns BTM_BLE_NON_DISCOVERABLE ,BTM_BLE_LIMITED_DISCOVERABLE or ** BTM_BLE_GENRAL_DISCOVERABLE ** *******************************************************************************/ UINT16 BTM_BleReadDiscoverability(); /******************************************************************************* ** ** Function BTM__BLEReadConnectability ** ** Description This function is called to read the current LE connectibility ** mode of the device. ** ** Returns BTM_BLE_NON_CONNECTABLE or BTM_BLE_CONNECTABLE ** *******************************************************************************/ //extern UINT16 BTM_BleReadConnectability (); void BTM_Recovery_Pre_State(void); /******************************************************************************* ** ** Function BTM_ReadDevInfo ** ** Description This function is called to read the device/address type ** of BD address. ** ** Parameter remote_bda: remote device address ** p_dev_type: output parameter to read the device type. ** p_addr_type: output parameter to read the address type. ** *******************************************************************************/ //extern void BTM_ReadDevInfo (BD_ADDR remote_bda, tBT_DEVICE_TYPE *p_dev_type, tBLE_ADDR_TYPE *p_addr_type); /******************************************************************************* ** ** Function BTM_ReadConnectedTransportAddress ** ** Description This function is called to read the paired device/address type of other device paired ** corresponding to the BD_address ** ** Parameter remote_bda: remote device address, carry out the transport address ** transport: active transport ** ** Return TRUE if an active link is identified; FALSE otherwise ** *******************************************************************************/ //extern BOOLEAN BTM_ReadConnectedTransportAddress(BD_ADDR remote_bda, tBT_TRANSPORT transport); /******************************************************************************* ** ** Function BTM_BleBroadcast ** ** Description This function is to start or stop broadcasting. ** ** Parameters start: start or stop broadcasting. ** ** Returns status. ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleBroadcast(BOOLEAN start, tBTM_START_STOP_ADV_CMPL_CBACK *p_stop_adv_cback); /******************************************************************************* ** ** Function BTM_BleConfigPrivacy ** ** Description This function is called to enable or disable the privacy in ** the local device. ** ** Parameters enable: TRUE to enable it; FALSE to disable it. ** ** Returns BOOLEAN privacy mode set success; otherwise failed. ** *******************************************************************************/ //extern BOOLEAN BTM_BleConfigPrivacy(BOOLEAN enable, tBTM_SET_LOCAL_PRIVACY_CBACK *set_local_privacy_cabck); /******************************************************************************* ** ** Function BTM_BleConfigLocalIcon ** ** Description This function is called to set local icon ** ** Parameters icon: appearance value. ** ** *******************************************************************************/ void BTM_BleConfigLocalIcon(uint16_t icon); /******************************************************************************* ** ** Function BTM_BleLocalPrivacyEnabled ** ** Description Checks if local device supports private address ** ** Returns Return TRUE if local privacy is enabled else FALSE ** *******************************************************************************/ //extern BOOLEAN BTM_BleLocalPrivacyEnabled(void); /******************************************************************************* ** ** Function BTM_BleEnableMixedPrivacyMode ** ** Description This function is called to enabled Mixed mode if privacy 1.2 ** is applicable in controller. ** ** Parameters mixed_on: mixed mode to be used or not. ** ** Returns void ** *******************************************************************************/ //extern void BTM_BleEnableMixedPrivacyMode(BOOLEAN mixed_on); /******************************************************************************* ** ** Function BTM_BleMaxMultiAdvInstanceCount ** ** Description Returns max number of multi adv instances supported by controller ** ** Returns Max multi adv instance count ** *******************************************************************************/ //extern UINT8 BTM_BleMaxMultiAdvInstanceCount(); /******************************************************************************* ** ** Function BTM_BleSetConnectableMode ** ** Description This function is called to set BLE connectable mode for a ** peripheral device. ** ** Parameters connectable_mode: directed connectable mode, or non-directed.It can ** be BTM_BLE_CONNECT_EVT, BTM_BLE_CONNECT_DIR_EVT or ** BTM_BLE_CONNECT_LO_DUTY_DIR_EVT ** ** Returns BTM_ILLEGAL_VALUE if controller does not support BLE. ** BTM_SUCCESS is status set successfully; otherwise failure. ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleSetConnectableMode(tBTM_BLE_CONN_MODE connectable_mode); /******************************************************************************* ** ** Function BTM_BleTurnOnPrivacyOnRemote ** ** Description This function is called to enable or disable the privacy on the ** remote device. ** ** Parameters bd_addr: remote device address. ** privacy_on: TRUE to enable it; FALSE to disable it. ** ** Returns void ** *******************************************************************************/ //extern void BTM_BleTurnOnPrivacyOnRemote(BD_ADDR bd_addr, BOOLEAN privacy_on); /******************************************************************************* ** ** Function BTM_BleUpdateAdvWhitelist ** ** Description Add or remove device from advertising white list ** ** Returns void ** *******************************************************************************/ //extern BOOLEAN BTM_BleUpdateAdvWhitelist(BOOLEAN add_remove, BD_ADDR emote_bda, tBTM_ADD_WHITELIST_CBACK *add_wl_cb); /******************************************************************************* ** ** Function BTM_BleUpdateAdvFilterPolicy ** ** Description This function update the filter policy of advertiser. ** ** Parameter adv_policy: advertising filter policy ** ** Return void *******************************************************************************/ //extern void BTM_BleUpdateAdvFilterPolicy(tBTM_BLE_AFP adv_policy); /******************************************************************************* ** ** Function BTM_BleReceiverTest ** ** Description This function is called to start the LE Receiver test ** ** Parameter rx_freq - Frequency Range ** p_cmd_cmpl_cback - Command Complete callback ** *******************************************************************************/ void BTM_BleReceiverTest(UINT8 rx_freq, tBTM_CMPL_CB *p_cmd_cmpl_cback); /******************************************************************************* ** ** Function BTM_BleTransmitterTest ** ** Description This function is called to start the LE Transmitter test ** ** Parameter tx_freq - Frequency Range ** test_data_len - Length in bytes of payload data in each packet ** packet_payload - Pattern to use in the payload ** p_cmd_cmpl_cback - Command Complete callback ** *******************************************************************************/ void BTM_BleTransmitterTest(UINT8 tx_freq, UINT8 test_data_len, UINT8 packet_payload, tBTM_CMPL_CB *p_cmd_cmpl_cback); /******************************************************************************* ** ** Function BTM_BleTestEnd ** ** Description This function is called to stop the in-progress TX or RX test ** ** Parameter p_cmd_cmpl_cback - Command complete callback ** *******************************************************************************/ void BTM_BleTestEnd(tBTM_CMPL_CB *p_cmd_cmpl_cback); /******************************************************************************* ** ** Function BTM_UseLeLink ** ** Description This function is to select the underneath physical link to use. ** ** Returns TRUE to use LE, FALSE use BR/EDR. ** *******************************************************************************/ //extern BOOLEAN BTM_UseLeLink (BD_ADDR bd_addr); /******************************************************************************* ** ** Function BTM_BleStackEnable ** ** Description Enable/Disable BLE functionality on stack regarless controller ** capability. ** ** Parameters: enable: TRUE to enable, FALSE to disable. ** ** Returns TRUE if added OK, else FALSE ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleStackEnable (BOOLEAN enable); /******************************************************************************* ** ** Function BTM_GetLeSecurityState ** ** Description This function is called to get security mode 1 flags and ** encryption key size for LE peer. ** ** Returns BOOLEAN TRUE if LE device is found, FALSE otherwise. ** *******************************************************************************/ //extern BOOLEAN BTM_GetLeSecurityState (BD_ADDR bd_addr, UINT8 *p_le_dev_sec_flags, UINT8 *p_le_key_size); /******************************************************************************* ** ** Function BTM_BleSecurityProcedureIsRunning ** ** Description This function indicates if LE security procedure is ** currently running with the peer. ** ** Returns BOOLEAN TRUE if security procedure is running, FALSE otherwise. ** *******************************************************************************/ //extern BOOLEAN BTM_BleSecurityProcedureIsRunning (BD_ADDR bd_addr); /******************************************************************************* ** ** Function BTM_BleGetSupportedKeySize ** ** Description This function gets the maximum encryption key size in bytes ** the local device can suport. ** record. ** ** Returns the key size or 0 if the size can't be retrieved. ** *******************************************************************************/ //extern UINT8 BTM_BleGetSupportedKeySize (BD_ADDR bd_addr); /*******************************************************************************/ /* Multi ADV API */ /******************************************************************************* ** ** Function BTM_BleEnableAdvInstance ** ** Description This function enable a Multi-ADV instance with the specified ** adv parameters ** ** Parameters p_params: pointer to the adv parameter structure, set as default ** adv parameter when the instance is enabled. ** p_cback: callback function for the adv instance. ** p_ref: reference data attach to the adv instance to be enabled. ** ** Returns status ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleEnableAdvInstance (tBTM_BLE_ADV_PARAMS *p_params, tBTM_BLE_MULTI_ADV_CBACK *p_cback, void *p_ref); /******************************************************************************* ** ** Function BTM_BleUpdateAdvInstParam ** ** Description This function update a Multi-ADV instance with the specififed ** adv parameters. ** ** Parameters inst_id: adv instance ID ** p_params: pointer to the adv parameter structure. ** ** Returns status ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleUpdateAdvInstParam (UINT8 inst_id, tBTM_BLE_ADV_PARAMS *p_params); /******************************************************************************* ** ** Function BTM_BleCfgAdvInstData ** ** Description This function configure a Multi-ADV instance with the specified ** adv data or scan response data. ** ** Parameters inst_id: adv instance ID ** is_scan_rsp: is this scacn response, if no set as adv data. ** data_mask: adv data mask. ** p_data: pointer to the adv data structure. ** ** Returns status ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleCfgAdvInstData (UINT8 inst_id, BOOLEAN is_scan_rsp, tBTM_BLE_AD_MASK data_mask, tBTM_BLE_ADV_DATA *p_data); /******************************************************************************* ** ** Function BTM_BleDisableAdvInstance ** ** Description This function disable a Multi-ADV instance. ** ** Parameters inst_id: adv instance ID ** ** Returns status ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleDisableAdvInstance (UINT8 inst_id); /******************************************************************************* ** ** Function BTM_BleAdvFilterParamSetup ** ** Description This function is called to setup the adv data payload filter ** condition. ** ** Parameters p_target: enabble the filter condition on a target device; if NULL ** enable the generic scan condition. ** enable: enable or disable the filter condition ** ** Returns void ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleAdvFilterParamSetup(int action, tBTM_BLE_PF_FILT_INDEX filt_index, tBTM_BLE_PF_FILT_PARAMS *p_filt_params, tBLE_BD_ADDR *p_target, tBTM_BLE_PF_PARAM_CBACK *p_cmpl_cback, tBTM_BLE_REF_VALUE ref_value); /******************************************************************************* ** ** Function BTM_BleCfgFilterCondition ** ** Description This function is called to configure the adv data payload filter ** condition. ** ** Parameters action: to read/write/clear ** cond_type: filter condition type. ** p_cond: filter condition paramter ** ** Returns tBTM_STATUS ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleCfgFilterCondition(tBTM_BLE_SCAN_COND_OP action, tBTM_BLE_PF_COND_TYPE cond_type, tBTM_BLE_PF_FILT_INDEX filt_index, tBTM_BLE_PF_COND_PARAM *p_cond, tBTM_BLE_PF_CFG_CBACK *p_cmpl_cback, tBTM_BLE_REF_VALUE ref_value); /******************************************************************************* ** ** Function BTM_BleEnableDisableFilterFeature ** ** Description This function is called to enable or disable the APCF feature ** ** Parameters enable - TRUE - enables the APCF, FALSE - disables the APCF ** ref_value - Ref value ** ** Returns tBTM_STATUS ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleEnableDisableFilterFeature(UINT8 enable, tBTM_BLE_PF_STATUS_CBACK *p_stat_cback, tBTM_BLE_REF_VALUE ref_value); /******************************************************************************* ** ** Function BTM_BleGetEnergyInfo ** ** Description This function obtains the energy info ** ** Parameters p_ener_cback - Callback pointer ** ** Returns status ** *******************************************************************************/ //extern tBTM_STATUS BTM_BleGetEnergyInfo(tBTM_BLE_ENERGY_INFO_CBACK *p_ener_cback); /******************************************************************************* ** ** Function BTM_SetBleDataLength ** ** Description This function is called to set maximum BLE transmission packet size ** ** Returns BTM_SUCCESS if success; otherwise failed. ** *******************************************************************************/ //extern tBTM_STATUS BTM_SetBleDataLength(BD_ADDR bd_addr, UINT16 tx_pdu_length); /* #ifdef __cplusplus } #endif */ #endif