#include "USB.h"
USBCDC USBSerial;

static void usbEventCallback(void* arg, esp_event_base_t event_base, int32_t event_id, void* event_data){
  if(event_base == ARDUINO_USB_EVENTS){
    arduino_usb_event_data_t * data = (arduino_usb_event_data_t*)event_data;
    switch (event_id){
      case ARDUINO_USB_STARTED_EVENT:
        Serial.println("USB PLUGGED");
        break;
      case ARDUINO_USB_STOPPED_EVENT:
        Serial.println("USB UNPLUGGED");
        break;
      case ARDUINO_USB_SUSPEND_EVENT:
        Serial.printf("USB SUSPENDED: remote_wakeup_en: %u\n", data->suspend.remote_wakeup_en);
        break;
      case ARDUINO_USB_RESUME_EVENT:
        Serial.println("USB RESUMED");
        break;
      
      default:
        break;
    }
  } else if(event_base == ARDUINO_USB_CDC_EVENTS){
    arduino_usb_cdc_event_data_t * data = (arduino_usb_cdc_event_data_t*)event_data;
    switch (event_id){
      case ARDUINO_USB_CDC_CONNECTED_EVENT:
        Serial.println("CDC CONNECTED");
        break;
      case ARDUINO_USB_CDC_DISCONNECTED_EVENT:
        Serial.println("CDC DISCONNECTED");
        break;
      case ARDUINO_USB_CDC_LINE_STATE_EVENT:
        Serial.printf("CDC LINE STATE: dtr: %u, rts: %u\n", data->line_state.dtr, data->line_state.rts);
        break;
      case ARDUINO_USB_CDC_LINE_CODING_EVENT:
        Serial.printf("CDC LINE CODING: bit_rate: %u, data_bits: %u, stop_bits: %u, parity: %u\n", data->line_coding.bit_rate, data->line_coding.data_bits, data->line_coding.stop_bits, data->line_coding.parity);
        break;
      case ARDUINO_USB_CDC_RX_EVENT:
        Serial.printf("CDC RX: %u\n", data->rx.len);
        {
            uint8_t buf[data->rx.len];
            size_t len = USBSerial.read(buf, data->rx.len);
            Serial.write(buf, len);
        }
        break;
      
      default:
        break;
    }
  }
}


void setup() {
  Serial.begin(115200);
  Serial.setDebugOutput(true);
  
  USB.onEvent(usbEventCallback);
  USB.productName("ESP32S2-USB");
  USB.begin();
  
  USBSerial.onEvent(usbEventCallback);
  USBSerial.begin();
}

void loop() {
  while(Serial.available()){
    size_t l = Serial.available();
    uint8_t b[l];
    l = Serial.read(b, l);
    USBSerial.write(b, l);
  }
}