// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. #include "esp32-hal-gpio.h" #include "freertos/FreeRTOS.h" #include "freertos/task.h" #include "rom/ets_sys.h" #include "esp_attr.h" #include "esp_intr.h" #include "rom/gpio.h" #include "soc/gpio_reg.h" #include "soc/io_mux_reg.h" #include "soc/gpio_struct.h" #include "soc/rtc_io_reg.h" #define ETS_GPIO_INUM 12 const int8_t esp32_adc2gpio[20] = {36, -1, -1, 39, 32, 33, 34, 35, -1, -1, 4, 0, 2, 15, 13, 12, 14, 27, 25, 26}; const DRAM_ATTR esp32_gpioMux_t esp32_gpioMux[GPIO_PIN_COUNT]={ {0x44, 11, 11, 1}, {0x88, -1, -1, -1}, {0x40, 12, 12, 2}, {0x84, -1, -1, -1}, {0x48, 10, 10, 0}, {0x6c, -1, -1, -1}, {0x60, -1, -1, -1}, {0x64, -1, -1, -1}, {0x68, -1, -1, -1}, {0x54, -1, -1, -1}, {0x58, -1, -1, -1}, {0x5c, -1, -1, -1}, {0x34, 15, 15, 5}, {0x38, 14, 14, 4}, {0x30, 16, 16, 6}, {0x3c, 13, 13, 3}, {0x4c, -1, -1, -1}, {0x50, -1, -1, -1}, {0x70, -1, -1, -1}, {0x74, -1, -1, -1}, {0x78, -1, -1, -1}, {0x7c, -1, -1, -1}, {0x80, -1, -1, -1}, {0x8c, -1, -1, -1}, {0, -1, -1, -1}, {0x24, 6, 18, -1}, //DAC1 {0x28, 7, 19, -1}, //DAC2 {0x2c, 17, 17, 7}, {0, -1, -1, -1}, {0, -1, -1, -1}, {0, -1, -1, -1}, {0, -1, -1, -1}, {0x1c, 9, 4, 9}, {0x20, 8, 5, 8}, {0x14, 4, 6, -1}, {0x18, 5, 7, -1}, {0x04, 0, 0, -1}, {0x08, 1, -1, -1}, {0x0c, 2, -1, -1}, {0x10, 3, 3, -1} }; typedef void (*voidFuncPtr)(void); static voidFuncPtr __pinInterruptHandlers[GPIO_PIN_COUNT] = {0,}; #include "driver/rtc_io.h" extern void IRAM_ATTR __pinMode(uint8_t pin, uint8_t mode) { if(!digitalPinIsValid(pin)) { return; } uint32_t rtc_reg = rtc_gpio_desc[pin].reg; if(mode == ANALOG) { if(!rtc_reg) { return;//not rtc pin } //lock rtc uint32_t reg_val = ESP_REG(rtc_reg); if(reg_val & rtc_gpio_desc[pin].mux){ return;//already in adc mode } reg_val &= ~( (RTC_IO_TOUCH_PAD1_FUN_SEL_V << rtc_gpio_desc[pin].func) |rtc_gpio_desc[pin].ie |rtc_gpio_desc[pin].pullup |rtc_gpio_desc[pin].pulldown); ESP_REG(RTC_GPIO_ENABLE_W1TC_REG) = (1 << (rtc_gpio_desc[pin].rtc_num + RTC_GPIO_ENABLE_W1TC_S)); ESP_REG(rtc_reg) = reg_val | rtc_gpio_desc[pin].mux; //unlock rtc ESP_REG(DR_REG_IO_MUX_BASE + esp32_gpioMux[pin].reg) = ((uint32_t)2 << MCU_SEL_S) | ((uint32_t)2 << FUN_DRV_S) | FUN_IE; return; } else if(rtc_reg) { //lock rtc ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_gpio_desc[pin].mux); if(mode & PULLUP) { ESP_REG(rtc_reg) = (ESP_REG(rtc_reg) | rtc_gpio_desc[pin].pullup) & ~(rtc_gpio_desc[pin].pulldown); } else if(mode & PULLDOWN) { ESP_REG(rtc_reg) = (ESP_REG(rtc_reg) | rtc_gpio_desc[pin].pulldown) & ~(rtc_gpio_desc[pin].pullup); } else { ESP_REG(rtc_reg) = ESP_REG(rtc_reg) & ~(rtc_gpio_desc[pin].pullup | rtc_gpio_desc[pin].pulldown); } //unlock rtc } uint32_t pinFunction = 0, pinControl = 0; //lock gpio if(mode & INPUT) { if(pin < 32) { GPIO.enable_w1tc = ((uint32_t)1 << pin); } else { GPIO.enable1_w1tc.val = ((uint32_t)1 << (pin - 32)); } if(mode & PULLUP) { pinFunction |= FUN_PU; } else if(mode & PULLDOWN) { pinFunction |= FUN_PD; } } else if(mode & OUTPUT) { if(pin > 33){ //unlock gpio return;//pins above 33 can be only inputs } else if(pin < 32) { GPIO.enable_w1ts = ((uint32_t)1 << pin); } else { GPIO.enable1_w1ts.val = ((uint32_t)1 << (pin - 32)); } } pinFunction |= ((uint32_t)2 << FUN_DRV_S);//what are the drivers? pinFunction |= FUN_IE;//input enable but required for output as well? if(mode & (INPUT | OUTPUT)) { pinFunction |= ((uint32_t)2 << MCU_SEL_S); } else if(mode == SPECIAL) { pinFunction |= ((uint32_t)(((pin)==1||(pin)==3)?0:1) << MCU_SEL_S); } else { pinFunction |= ((uint32_t)(mode >> 5) << MCU_SEL_S); } ESP_REG(DR_REG_IO_MUX_BASE + esp32_gpioMux[pin].reg) = pinFunction; if(mode & OPEN_DRAIN) { pinControl = (1 << GPIO_PIN0_PAD_DRIVER_S); } GPIO.pin[pin].val = pinControl; //unlock gpio } extern void IRAM_ATTR __digitalWrite(uint8_t pin, uint8_t val) { if(val) { if(pin < 32) { GPIO.out_w1ts = ((uint32_t)1 << pin); } else if(pin < 34) { GPIO.out1_w1ts.val = ((uint32_t)1 << (pin - 32)); } } else { if(pin < 32) { GPIO.out_w1tc = ((uint32_t)1 << pin); } else if(pin < 34) { GPIO.out1_w1tc.val = ((uint32_t)1 << (pin - 32)); } } } extern int IRAM_ATTR __digitalRead(uint8_t pin) { if(pin < 32) { return (GPIO.in >> pin) & 0x1; } else if(pin < 40) { return (GPIO.in1.val >> (pin - 32)) & 0x1; } return 0; } static void IRAM_ATTR __onPinInterrupt(void *arg) { uint32_t gpio_intr_status_l=0; uint32_t gpio_intr_status_h=0; gpio_intr_status_l = GPIO.status; gpio_intr_status_h = GPIO.status1.val; GPIO.status_w1tc = gpio_intr_status_l;//Clear intr for gpio0-gpio31 GPIO.status1_w1tc.val = gpio_intr_status_h;//Clear intr for gpio32-39 uint8_t pin=0; if(gpio_intr_status_l) { do { if(gpio_intr_status_l & ((uint32_t)1 << pin)) { if(__pinInterruptHandlers[pin]) { __pinInterruptHandlers[pin](); } } } while(++pin<32); } if(gpio_intr_status_h) { pin=32; do { if(gpio_intr_status_h & ((uint32_t)1 << (pin - 32))) { if(__pinInterruptHandlers[pin]) { __pinInterruptHandlers[pin](); } } } while(++pin