arduino-esp32/Kconfig.projbuild
Me No Dev 5502879a5b
v2.0.0 Add support for ESP32S2 and update ESP-IDF to 4.4 (#4996)
This is very much still work in progress and much more will change before the final 2.0.0

Some APIs have changed. New libraries have been added. LittleFS included.

Co-authored-by: Seon Rozenblum <seonr@3sprockets.com>
Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com>
Co-authored-by: geeksville <kevinh@geeksville.com>
Co-authored-by: Mike Dunston <m_dunston@comcast.net>
Co-authored-by: Unexpected Maker <seon@unexpectedmaker.com>
Co-authored-by: Seon Rozenblum <seonr@3sprockets.com>
Co-authored-by: microDev <70126934+microDev1@users.noreply.github.com>
Co-authored-by: tobozo <tobozo@users.noreply.github.com>
Co-authored-by: bobobo1618 <bobobo1618@users.noreply.github.com>
Co-authored-by: lorol <lorolouis@gmail.com>
Co-authored-by: geeksville <kevinh@geeksville.com>
Co-authored-by: Limor "Ladyada" Fried <limor@ladyada.net>
Co-authored-by: Sweety <switi.mhaiske@espressif.com>
Co-authored-by: Loick MAHIEUX <loick111@gmail.com>
Co-authored-by: Larry Bernstone <lbernstone@gmail.com>
Co-authored-by: Valerii Koval <valeros@users.noreply.github.com>
Co-authored-by: 快乐的我531 <2302004040@qq.com>
Co-authored-by: chegewara <imperiaonline4@gmail.com>
Co-authored-by: Clemens Kirchgatterer <clemens@1541.org>
Co-authored-by: Aron Rubin <aronrubin@gmail.com>
Co-authored-by: Pete Lewis <601236+lewispg228@users.noreply.github.com>
2021-04-05 14:23:58 +03:00

359 lines
9.8 KiB
Plaintext

menu "Arduino Configuration"
config ENABLE_ARDUINO_DEPENDS
bool
select LWIP_SO_RCVBUF
select ETHERNET
select WIFI_ENABLED
select ESP32_PHY_CALIBRATION_AND_DATA_STORAGE if IDF_TARGET_ESP32
select MEMMAP_SMP
default "y"
config AUTOSTART_ARDUINO
bool "Autostart Arduino setup and loop on boot"
default "n"
help
Enabling this option will implement app_main and start Arduino.
All you need to implement in your main.cpp is setup() and loop()
and include Arduino.h
If disabled, you can call initArduino() to run any preparations
required by the framework
choice ARDUINO_RUNNING_CORE
bool "Core on which Arduino's setup() and loop() are running"
default ARDUINO_RUN_CORE1
help
Select on which core Arduino's setup() and loop() functions run
config ARDUINO_RUN_CORE0
bool "CORE 0"
config ARDUINO_RUN_CORE1
bool "CORE 1"
config ARDUINO_RUN_NO_AFFINITY
bool "BOTH"
endchoice
config ARDUINO_RUNNING_CORE
int
default 0 if ARDUINO_RUN_CORE0
default 1 if ARDUINO_RUN_CORE1
default -1 if ARDUINO_RUN_NO_AFFINITY
config ARDUINO_LOOP_STACK_SIZE
int "Loop thread stack size"
default 8192
help
Amount of stack available for the Arduino task.
choice ARDUINO_EVENT_RUNNING_CORE
bool "Core on which Arduino's event handler is running"
default ARDUINO_EVENT_RUN_CORE1
help
Select on which core Arduino's WiFi.onEvent() run
config ARDUINO_EVENT_RUN_CORE0
bool "CORE 0"
config ARDUINO_EVENT_RUN_CORE1
bool "CORE 1"
config ARDUINO_EVENT_RUN_NO_AFFINITY
bool "BOTH"
endchoice
config ARDUINO_EVENT_RUNNING_CORE
int
default 0 if ARDUINO_EVENT_RUN_CORE0
default 1 if ARDUINO_EVENT_RUN_CORE1
default -1 if ARDUINO_EVENT_RUN_NO_AFFINITY
choice ARDUINO_UDP_RUNNING_CORE
bool "Core on which Arduino's UDP is running"
default ARDUINO_UDP_RUN_CORE1
help
Select on which core Arduino's UDP run
config ARDUINO_UDP_RUN_CORE0
bool "CORE 0"
config ARDUINO_UDP_RUN_CORE1
bool "CORE 1"
config ARDUINO_UDP_RUN_NO_AFFINITY
bool "BOTH"
endchoice
config ARDUINO_UDP_TASK_PRIORITY
int "Priority of the UDP task"
default 3
help
Select at what priority you want the UDP task to run.
config ARDUINO_UDP_RUNNING_CORE
int
default 0 if ARDUINO_UDP_RUN_CORE0
default 1 if ARDUINO_UDP_RUN_CORE1
default -1 if ARDUINO_UDP_RUN_NO_AFFINITY
config ARDUINO_ISR_IRAM
bool "Run interrupts in IRAM"
default "n"
help
Enabling this option will Attach all interrupts with the IRAm flag.
It will also make some HAL function, like, digitalRead/Write and more
be loaded into IRAM for access inside ISRs.
Beware that this is a very dangerous setting. Enable it only if you
are fully aware of the consequences.
config DISABLE_HAL_LOCKS
bool "Disable mutex locks for HAL"
default "n"
help
Enabling this option will run all hardware abstraction without locks.
While communication with external hardware will be faster, you need to
make sure that there is no option to use the same bus from another thread
or interrupt at the same time. Option is best used with Arduino enabled
and code implemented only in setup/loop and Arduino callbacks
menu "Debug Log Configuration"
choice ARDUHAL_LOG_DEFAULT_LEVEL
bool "Default log level"
default ARDUHAL_LOG_DEFAULT_LEVEL_ERROR
help
Specify how much output to see in logs by default.
config ARDUHAL_LOG_DEFAULT_LEVEL_NONE
bool "No output"
config ARDUHAL_LOG_DEFAULT_LEVEL_ERROR
bool "Error"
config ARDUHAL_LOG_DEFAULT_LEVEL_WARN
bool "Warning"
config ARDUHAL_LOG_DEFAULT_LEVEL_INFO
bool "Info"
config ARDUHAL_LOG_DEFAULT_LEVEL_DEBUG
bool "Debug"
config ARDUHAL_LOG_DEFAULT_LEVEL_VERBOSE
bool "Verbose"
endchoice
config ARDUHAL_LOG_DEFAULT_LEVEL
int
default 0 if ARDUHAL_LOG_DEFAULT_LEVEL_NONE
default 1 if ARDUHAL_LOG_DEFAULT_LEVEL_ERROR
default 2 if ARDUHAL_LOG_DEFAULT_LEVEL_WARN
default 3 if ARDUHAL_LOG_DEFAULT_LEVEL_INFO
default 4 if ARDUHAL_LOG_DEFAULT_LEVEL_DEBUG
default 5 if ARDUHAL_LOG_DEFAULT_LEVEL_VERBOSE
config ARDUHAL_LOG_COLORS
bool "Use ANSI terminal colors in log output"
default "n"
help
Enable ANSI terminal color codes in bootloader output.
In order to view these, your terminal program must support ANSI color codes.
config ARDUHAL_ESP_LOG
bool "Forward ESP_LOGx to Arduino log output"
default "n"
help
This option will redefine the ESP_LOGx macros to Arduino's log_x macros.
To enable for your application, add the follwing after your includes:
#ifdef ARDUINO_ARCH_ESP32
#include "esp32-hal-log.h"
#endif
endmenu
choice ARDUHAL_PARTITION_SCHEME
bool "Used partition scheme"
default ARDUHAL_PARTITION_SCHEME_DEFAULT
help
Specify which partition scheme to be used.
config ARDUHAL_PARTITION_SCHEME_DEFAULT
bool "Default"
config ARDUHAL_PARTITION_SCHEME_MINIMAL
bool "Minimal (for 2MB FLASH)"
config ARDUHAL_PARTITION_SCHEME_NO_OTA
bool "No OTA (for large apps)"
config ARDUHAL_PARTITION_SCHEME_HUGE_APP
bool "Huge App (for very large apps)"
config ARDUHAL_PARTITION_SCHEME_MIN_SPIFFS
bool "Minimal SPIFFS (for large apps with OTA)"
endchoice
config ARDUHAL_PARTITION_SCHEME
string
default "default" if ARDUHAL_PARTITION_SCHEME_DEFAULT
default "minimal" if ARDUHAL_PARTITION_SCHEME_MINIMAL
default "no_ota" if ARDUHAL_PARTITION_SCHEME_NO_OTA
default "huge_app" if ARDUHAL_PARTITION_SCHEME_HUGE_APP
default "min_spiffs" if ARDUHAL_PARTITION_SCHEME_MIN_SPIFFS
config AUTOCONNECT_WIFI
bool "Autoconnect WiFi on boot"
default "n"
depends on AUTOSTART_ARDUINO
select ARDUINO_SELECTIVE_WiFi
help
If enabled, WiFi will connect to the last used SSID (if station was enabled),
else connection will be started only after calling WiFi.begin(ssid, password)
config ARDUINO_SELECTIVE_COMPILATION
bool "Include only specific Arduino libraries"
default n
config ARDUINO_SELECTIVE_ArduinoOTA
bool "Enable ArduinoOTA"
depends on ARDUINO_SELECTIVE_COMPILATION
select ARDUINO_SELECTIVE_WiFi
select ARDUINO_SELECTIVE_ESPmDNS
default y
config ARDUINO_SELECTIVE_AsyncUDP
bool "Enable AsyncUDP"
depends on ARDUINO_SELECTIVE_COMPILATION
default y
config ARDUINO_SELECTIVE_AzureIoT
bool "Enable AzureIoT"
depends on ARDUINO_SELECTIVE_COMPILATION
select ARDUINO_SELECTIVE_HTTPClient
default y
config ARDUINO_SELECTIVE_BLE
bool "Enable BLE"
depends on ARDUINO_SELECTIVE_COMPILATION
default y
config ARDUINO_SELECTIVE_BluetoothSerial
bool "Enable BluetoothSerial"
depends on ARDUINO_SELECTIVE_COMPILATION
default y
config ARDUINO_SELECTIVE_DNSServer
bool "Enable DNSServer"
depends on ARDUINO_SELECTIVE_COMPILATION
select ARDUINO_SELECTIVE_WiFi
default y
config ARDUINO_SELECTIVE_EEPROM
bool "Enable EEPROM"
depends on ARDUINO_SELECTIVE_COMPILATION
default y
config ARDUINO_SELECTIVE_ESP32
bool "Enable ESP32"
depends on ARDUINO_SELECTIVE_COMPILATION
default y
config ARDUINO_SELECTIVE_ESPmDNS
bool "Enable ESPmDNS"
depends on ARDUINO_SELECTIVE_COMPILATION
select ARDUINO_SELECTIVE_WiFi
default y
config ARDUINO_SELECTIVE_FFat
bool "Enable FFat"
depends on ARDUINO_SELECTIVE_COMPILATION
select ARDUINO_SELECTIVE_FS
default y
config ARDUINO_SELECTIVE_FS
bool "Enable FS"
depends on ARDUINO_SELECTIVE_COMPILATION
default y
config ARDUINO_SELECTIVE_HTTPClient
bool "Enable HTTPClient"
depends on ARDUINO_SELECTIVE_COMPILATION
select ARDUINO_SELECTIVE_WiFi
select ARDUINO_SELECTIVE_WiFiClientSecure
default y
config ARDUINO_SELECTIVE_LITTLEFS
bool "Enable LITTLEFS"
depends on ARDUINO_SELECTIVE_COMPILATION
select ARDUINO_SELECTIVE_FS
default y
config ARDUINO_SELECTIVE_NetBIOS
bool "Enable NetBIOS"
depends on ARDUINO_SELECTIVE_COMPILATION
select ARDUINO_SELECTIVE_WiFi
default y
config ARDUINO_SELECTIVE_Preferences
bool "Enable Preferences"
depends on ARDUINO_SELECTIVE_COMPILATION
default y
config ARDUINO_SELECTIVE_SD
bool "Enable SD"
depends on ARDUINO_SELECTIVE_COMPILATION
select ARDUINO_SELECTIVE_FS
default y
config ARDUINO_SELECTIVE_SD_MMC
bool "Enable SD_MMC"
depends on ARDUINO_SELECTIVE_COMPILATION
select ARDUINO_SELECTIVE_FS
default y
config ARDUINO_SELECTIVE_SimpleBLE
bool "Enable SimpleBLE"
depends on ARDUINO_SELECTIVE_COMPILATION
default y
config ARDUINO_SELECTIVE_SPI
bool "Enable SPI"
depends on ARDUINO_SELECTIVE_COMPILATION
default y
config ARDUINO_SELECTIVE_SPIFFS
bool "Enable SPIFFS"
depends on ARDUINO_SELECTIVE_COMPILATION
select ARDUINO_SELECTIVE_FS
default y
config ARDUINO_SELECTIVE_Ticker
bool "Enable Ticker"
depends on ARDUINO_SELECTIVE_COMPILATION
default y
config ARDUINO_SELECTIVE_Update
bool "Enable Update"
depends on ARDUINO_SELECTIVE_COMPILATION
default y
config ARDUINO_SELECTIVE_WebServer
bool "Enable WebServer"
depends on ARDUINO_SELECTIVE_COMPILATION
default y
select ARDUINO_SELECTIVE_FS
config ARDUINO_SELECTIVE_WiFi
bool "Enable WiFi"
depends on ARDUINO_SELECTIVE_COMPILATION
default y
config ARDUINO_SELECTIVE_WiFiClientSecure
bool "Enable WiFiClientSecure"
depends on ARDUINO_SELECTIVE_COMPILATION
select ARDUINO_SELECTIVE_WiFi
default y
config ARDUINO_SELECTIVE_WiFiProv
bool "Enable WiFiProv"
depends on ARDUINO_SELECTIVE_COMPILATION
select ARDUINO_SELECTIVE_WiFi
default y
config ARDUINO_SELECTIVE_Wire
bool "Enable Wire"
depends on ARDUINO_SELECTIVE_COMPILATION
default y
endmenu