jacob.eva/arduino-esp32
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
0768590332
arduino-esp32/tools/sdk/include/soc/soc/ledc_reg.h
Me No Dev 56ef31f899 Update IDF to version 3cad00f (#310)
2017-04-12 21:49:58 +03:00

2424 lines
130 KiB
C
Raw Blame History

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_LEDC_REG_H_
#define _SOC_LEDC_REG_H_
#include "soc.h"
#define LEDC_HSCH0_CONF0_REG (DR_REG_LEDC_BASE + 0x0000)
/* LEDC_CLK_EN : R/W ;bitpos:[31] ;default: 1'h0 ; */
/*description: This bit is clock gating control signal. when software config
LED_PWM internal registers it controls the register clock.*/
#define LEDC_CLK_EN (BIT(31))
#define LEDC_CLK_EN_M (BIT(31))
#define LEDC_CLK_EN_V 0x1
#define LEDC_CLK_EN_S 31
/* LEDC_IDLE_LV_HSCH0 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when high speed channel0 is off.*/
#define LEDC_IDLE_LV_HSCH0 (BIT(3))
#define LEDC_IDLE_LV_HSCH0_M (BIT(3))
#define LEDC_IDLE_LV_HSCH0_V 0x1
#define LEDC_IDLE_LV_HSCH0_S 3
/* LEDC_SIG_OUT_EN_HSCH0 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for high speed channel0*/
#define LEDC_SIG_OUT_EN_HSCH0 (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH0_M (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH0_V 0x1
#define LEDC_SIG_OUT_EN_HSCH0_S 2
/* LEDC_TIMER_SEL_HSCH0 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four high speed timers the two bits are used to select
one of them for high speed channel0. 2'b00: seletc hstimer0. 2'b01: select hstimer1. 2'b10: select hstimer2. 2'b11: select hstimer3.*/
#define LEDC_TIMER_SEL_HSCH0 0x00000003
#define LEDC_TIMER_SEL_HSCH0_M ((LEDC_TIMER_SEL_HSCH0_V)<<(LEDC_TIMER_SEL_HSCH0_S))
#define LEDC_TIMER_SEL_HSCH0_V 0x3
#define LEDC_TIMER_SEL_HSCH0_S 0
#define LEDC_HSCH0_HPOINT_REG (DR_REG_LEDC_BASE + 0x0004)
/* LEDC_HPOINT_HSCH0 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when htimerx(x=[0 3]) selected
by high speed channel0 has reached reg_hpoint_hsch0[19:0]*/
#define LEDC_HPOINT_HSCH0 0x000FFFFF
#define LEDC_HPOINT_HSCH0_M ((LEDC_HPOINT_HSCH0_V)<<(LEDC_HPOINT_HSCH0_S))
#define LEDC_HPOINT_HSCH0_V 0xFFFFF
#define LEDC_HPOINT_HSCH0_S 0
#define LEDC_HSCH0_DUTY_REG (DR_REG_LEDC_BASE + 0x0008)
/* LEDC_DUTY_HSCH0 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When hstimerx(x=[0
3]) choosed by high speed channel0 has reached reg_lpoint_hsch0 the output signal changes to low. reg_lpoint_hsch0=(reg_hpoint_hsch0[19:0]+reg_duty_hsch0[24:4]) (1) reg_lpoint_hsch0=(reg_hpoint_hsch0[19:0]+reg_duty_hsch0[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_HSCH0 0x01FFFFFF
#define LEDC_DUTY_HSCH0_M ((LEDC_DUTY_HSCH0_V)<<(LEDC_DUTY_HSCH0_S))
#define LEDC_DUTY_HSCH0_V 0x1FFFFFF
#define LEDC_DUTY_HSCH0_S 0
#define LEDC_HSCH0_CONF1_REG (DR_REG_LEDC_BASE + 0x000C)
/* LEDC_DUTY_START_HSCH0 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch0 reg_duty_cycle_hsch0 and reg_duty_scale_hsch0
has been configured. these register won't take effect until set reg_duty_start_hsch0. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_HSCH0 (BIT(31))
#define LEDC_DUTY_START_HSCH0_M (BIT(31))
#define LEDC_DUTY_START_HSCH0_V 0x1
#define LEDC_DUTY_START_HSCH0_S 31
/* LEDC_DUTY_INC_HSCH0 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for high speed channel0.*/
#define LEDC_DUTY_INC_HSCH0 (BIT(30))
#define LEDC_DUTY_INC_HSCH0_M (BIT(30))
#define LEDC_DUTY_INC_HSCH0_V 0x1
#define LEDC_DUTY_INC_HSCH0_S 30
/* LEDC_DUTY_NUM_HSCH0 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for high speed channel0.*/
#define LEDC_DUTY_NUM_HSCH0 0x000003FF
#define LEDC_DUTY_NUM_HSCH0_M ((LEDC_DUTY_NUM_HSCH0_V)<<(LEDC_DUTY_NUM_HSCH0_S))
#define LEDC_DUTY_NUM_HSCH0_V 0x3FF
#define LEDC_DUTY_NUM_HSCH0_S 20
/* LEDC_DUTY_CYCLE_HSCH0 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_hsch0 cycles for high speed channel0.*/
#define LEDC_DUTY_CYCLE_HSCH0 0x000003FF
#define LEDC_DUTY_CYCLE_HSCH0_M ((LEDC_DUTY_CYCLE_HSCH0_V)<<(LEDC_DUTY_CYCLE_HSCH0_S))
#define LEDC_DUTY_CYCLE_HSCH0_V 0x3FF
#define LEDC_DUTY_CYCLE_HSCH0_S 10
/* LEDC_DUTY_SCALE_HSCH0 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
high speed channel0.*/
#define LEDC_DUTY_SCALE_HSCH0 0x000003FF
#define LEDC_DUTY_SCALE_HSCH0_M ((LEDC_DUTY_SCALE_HSCH0_V)<<(LEDC_DUTY_SCALE_HSCH0_S))
#define LEDC_DUTY_SCALE_HSCH0_V 0x3FF
#define LEDC_DUTY_SCALE_HSCH0_S 0
#define LEDC_HSCH0_DUTY_R_REG (DR_REG_LEDC_BASE + 0x0010)
/* LEDC_DUTY_HSCH0 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for high speed channel0.*/
#define LEDC_DUTY_HSCH0 0x01FFFFFF
#define LEDC_DUTY_HSCH0_M ((LEDC_DUTY_HSCH0_V)<<(LEDC_DUTY_HSCH0_S))
#define LEDC_DUTY_HSCH0_V 0x1FFFFFF
#define LEDC_DUTY_HSCH0_S 0
#define LEDC_HSCH1_CONF0_REG (DR_REG_LEDC_BASE + 0x0014)
/* LEDC_IDLE_LV_HSCH1 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when high speed channel1 is off.*/
#define LEDC_IDLE_LV_HSCH1 (BIT(3))
#define LEDC_IDLE_LV_HSCH1_M (BIT(3))
#define LEDC_IDLE_LV_HSCH1_V 0x1
#define LEDC_IDLE_LV_HSCH1_S 3
/* LEDC_SIG_OUT_EN_HSCH1 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for high speed channel1*/
#define LEDC_SIG_OUT_EN_HSCH1 (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH1_M (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH1_V 0x1
#define LEDC_SIG_OUT_EN_HSCH1_S 2
/* LEDC_TIMER_SEL_HSCH1 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four high speed timers the two bits are used to select
one of them for high speed channel1. 2'b00: seletc hstimer0. 2'b01: select hstimer1. 2'b10: select hstimer2. 2'b11: select hstimer3.*/
#define LEDC_TIMER_SEL_HSCH1 0x00000003
#define LEDC_TIMER_SEL_HSCH1_M ((LEDC_TIMER_SEL_HSCH1_V)<<(LEDC_TIMER_SEL_HSCH1_S))
#define LEDC_TIMER_SEL_HSCH1_V 0x3
#define LEDC_TIMER_SEL_HSCH1_S 0
#define LEDC_HSCH1_HPOINT_REG (DR_REG_LEDC_BASE + 0x0018)
/* LEDC_HPOINT_HSCH1 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when htimerx(x=[0 3]) selected
by high speed channel1 has reached reg_hpoint_hsch1[19:0]*/
#define LEDC_HPOINT_HSCH1 0x000FFFFF
#define LEDC_HPOINT_HSCH1_M ((LEDC_HPOINT_HSCH1_V)<<(LEDC_HPOINT_HSCH1_S))
#define LEDC_HPOINT_HSCH1_V 0xFFFFF
#define LEDC_HPOINT_HSCH1_S 0
#define LEDC_HSCH1_DUTY_REG (DR_REG_LEDC_BASE + 0x001C)
/* LEDC_DUTY_HSCH1 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When hstimerx(x=[0
3]) choosed by high speed channel1 has reached reg_lpoint_hsch1 the output signal changes to low. reg_lpoint_hsch1=(reg_hpoint_hsch1[19:0]+reg_duty_hsch1[24:4]) (1) reg_lpoint_hsch1=(reg_hpoint_hsch1[19:0]+reg_duty_hsch1[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_HSCH1 0x01FFFFFF
#define LEDC_DUTY_HSCH1_M ((LEDC_DUTY_HSCH1_V)<<(LEDC_DUTY_HSCH1_S))
#define LEDC_DUTY_HSCH1_V 0x1FFFFFF
#define LEDC_DUTY_HSCH1_S 0
#define LEDC_HSCH1_CONF1_REG (DR_REG_LEDC_BASE + 0x0020)
/* LEDC_DUTY_START_HSCH1 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch1 reg_duty_cycle_hsch1 and reg_duty_scale_hsch1
has been configured. these register won't take effect until set reg_duty_start_hsch1. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_HSCH1 (BIT(31))
#define LEDC_DUTY_START_HSCH1_M (BIT(31))
#define LEDC_DUTY_START_HSCH1_V 0x1
#define LEDC_DUTY_START_HSCH1_S 31
/* LEDC_DUTY_INC_HSCH1 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for high speed channel1.*/
#define LEDC_DUTY_INC_HSCH1 (BIT(30))
#define LEDC_DUTY_INC_HSCH1_M (BIT(30))
#define LEDC_DUTY_INC_HSCH1_V 0x1
#define LEDC_DUTY_INC_HSCH1_S 30
/* LEDC_DUTY_NUM_HSCH1 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for high speed channel1.*/
#define LEDC_DUTY_NUM_HSCH1 0x000003FF
#define LEDC_DUTY_NUM_HSCH1_M ((LEDC_DUTY_NUM_HSCH1_V)<<(LEDC_DUTY_NUM_HSCH1_S))
#define LEDC_DUTY_NUM_HSCH1_V 0x3FF
#define LEDC_DUTY_NUM_HSCH1_S 20
/* LEDC_DUTY_CYCLE_HSCH1 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_hsch1 cycles for high speed channel1.*/
#define LEDC_DUTY_CYCLE_HSCH1 0x000003FF
#define LEDC_DUTY_CYCLE_HSCH1_M ((LEDC_DUTY_CYCLE_HSCH1_V)<<(LEDC_DUTY_CYCLE_HSCH1_S))
#define LEDC_DUTY_CYCLE_HSCH1_V 0x3FF
#define LEDC_DUTY_CYCLE_HSCH1_S 10
/* LEDC_DUTY_SCALE_HSCH1 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
high speed channel1.*/
#define LEDC_DUTY_SCALE_HSCH1 0x000003FF
#define LEDC_DUTY_SCALE_HSCH1_M ((LEDC_DUTY_SCALE_HSCH1_V)<<(LEDC_DUTY_SCALE_HSCH1_S))
#define LEDC_DUTY_SCALE_HSCH1_V 0x3FF
#define LEDC_DUTY_SCALE_HSCH1_S 0
#define LEDC_HSCH1_DUTY_R_REG (DR_REG_LEDC_BASE + 0x0024)
/* LEDC_DUTY_HSCH1 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for high speed channel1.*/
#define LEDC_DUTY_HSCH1 0x01FFFFFF
#define LEDC_DUTY_HSCH1_M ((LEDC_DUTY_HSCH1_V)<<(LEDC_DUTY_HSCH1_S))
#define LEDC_DUTY_HSCH1_V 0x1FFFFFF
#define LEDC_DUTY_HSCH1_S 0
#define LEDC_HSCH2_CONF0_REG (DR_REG_LEDC_BASE + 0x0028)
/* LEDC_IDLE_LV_HSCH2 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when high speed channel2 is off.*/
#define LEDC_IDLE_LV_HSCH2 (BIT(3))
#define LEDC_IDLE_LV_HSCH2_M (BIT(3))
#define LEDC_IDLE_LV_HSCH2_V 0x1
#define LEDC_IDLE_LV_HSCH2_S 3
/* LEDC_SIG_OUT_EN_HSCH2 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for high speed channel2*/
#define LEDC_SIG_OUT_EN_HSCH2 (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH2_M (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH2_V 0x1
#define LEDC_SIG_OUT_EN_HSCH2_S 2
/* LEDC_TIMER_SEL_HSCH2 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four high speed timers the two bits are used to select
one of them for high speed channel2. 2'b00: seletc hstimer0. 2'b01: select hstimer1. 2'b10: select hstimer2. 2'b11: select hstimer3.*/
#define LEDC_TIMER_SEL_HSCH2 0x00000003
#define LEDC_TIMER_SEL_HSCH2_M ((LEDC_TIMER_SEL_HSCH2_V)<<(LEDC_TIMER_SEL_HSCH2_S))
#define LEDC_TIMER_SEL_HSCH2_V 0x3
#define LEDC_TIMER_SEL_HSCH2_S 0
#define LEDC_HSCH2_HPOINT_REG (DR_REG_LEDC_BASE + 0x002C)
/* LEDC_HPOINT_HSCH2 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when htimerx(x=[0 3]) selected
by high speed channel2 has reached reg_hpoint_hsch2[19:0]*/
#define LEDC_HPOINT_HSCH2 0x000FFFFF
#define LEDC_HPOINT_HSCH2_M ((LEDC_HPOINT_HSCH2_V)<<(LEDC_HPOINT_HSCH2_S))
#define LEDC_HPOINT_HSCH2_V 0xFFFFF
#define LEDC_HPOINT_HSCH2_S 0
#define LEDC_HSCH2_DUTY_REG (DR_REG_LEDC_BASE + 0x0030)
/* LEDC_DUTY_HSCH2 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When hstimerx(x=[0
3]) choosed by high speed channel2 has reached reg_lpoint_hsch2 the output signal changes to low. reg_lpoint_hsch2=(reg_hpoint_hsch2[19:0]+reg_duty_hsch2[24:4]) (1) reg_lpoint_hsch2=(reg_hpoint_hsch2[19:0]+reg_duty_hsch2[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_HSCH2 0x01FFFFFF
#define LEDC_DUTY_HSCH2_M ((LEDC_DUTY_HSCH2_V)<<(LEDC_DUTY_HSCH2_S))
#define LEDC_DUTY_HSCH2_V 0x1FFFFFF
#define LEDC_DUTY_HSCH2_S 0
#define LEDC_HSCH2_CONF1_REG (DR_REG_LEDC_BASE + 0x0034)
/* LEDC_DUTY_START_HSCH2 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch2 reg_duty_cycle_hsch2 and reg_duty_scale_hsch2
has been configured. these register won't take effect until set reg_duty_start_hsch2. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_HSCH2 (BIT(31))
#define LEDC_DUTY_START_HSCH2_M (BIT(31))
#define LEDC_DUTY_START_HSCH2_V 0x1
#define LEDC_DUTY_START_HSCH2_S 31
/* LEDC_DUTY_INC_HSCH2 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for high speed channel2.*/
#define LEDC_DUTY_INC_HSCH2 (BIT(30))
#define LEDC_DUTY_INC_HSCH2_M (BIT(30))
#define LEDC_DUTY_INC_HSCH2_V 0x1
#define LEDC_DUTY_INC_HSCH2_S 30
/* LEDC_DUTY_NUM_HSCH2 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for high speed channel2.*/
#define LEDC_DUTY_NUM_HSCH2 0x000003FF
#define LEDC_DUTY_NUM_HSCH2_M ((LEDC_DUTY_NUM_HSCH2_V)<<(LEDC_DUTY_NUM_HSCH2_S))
#define LEDC_DUTY_NUM_HSCH2_V 0x3FF
#define LEDC_DUTY_NUM_HSCH2_S 20
/* LEDC_DUTY_CYCLE_HSCH2 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_hsch2 cycles for high speed channel2.*/
#define LEDC_DUTY_CYCLE_HSCH2 0x000003FF
#define LEDC_DUTY_CYCLE_HSCH2_M ((LEDC_DUTY_CYCLE_HSCH2_V)<<(LEDC_DUTY_CYCLE_HSCH2_S))
#define LEDC_DUTY_CYCLE_HSCH2_V 0x3FF
#define LEDC_DUTY_CYCLE_HSCH2_S 10
/* LEDC_DUTY_SCALE_HSCH2 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
high speed channel2.*/
#define LEDC_DUTY_SCALE_HSCH2 0x000003FF
#define LEDC_DUTY_SCALE_HSCH2_M ((LEDC_DUTY_SCALE_HSCH2_V)<<(LEDC_DUTY_SCALE_HSCH2_S))
#define LEDC_DUTY_SCALE_HSCH2_V 0x3FF
#define LEDC_DUTY_SCALE_HSCH2_S 0
#define LEDC_HSCH2_DUTY_R_REG (DR_REG_LEDC_BASE + 0x0038)
/* LEDC_DUTY_HSCH2 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for high speed channel2.*/
#define LEDC_DUTY_HSCH2 0x01FFFFFF
#define LEDC_DUTY_HSCH2_M ((LEDC_DUTY_HSCH2_V)<<(LEDC_DUTY_HSCH2_S))
#define LEDC_DUTY_HSCH2_V 0x1FFFFFF
#define LEDC_DUTY_HSCH2_S 0
#define LEDC_HSCH3_CONF0_REG (DR_REG_LEDC_BASE + 0x003C)
/* LEDC_IDLE_LV_HSCH3 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when high speed channel3 is off.*/
#define LEDC_IDLE_LV_HSCH3 (BIT(3))
#define LEDC_IDLE_LV_HSCH3_M (BIT(3))
#define LEDC_IDLE_LV_HSCH3_V 0x1
#define LEDC_IDLE_LV_HSCH3_S 3
/* LEDC_SIG_OUT_EN_HSCH3 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for high speed channel3*/
#define LEDC_SIG_OUT_EN_HSCH3 (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH3_M (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH3_V 0x1
#define LEDC_SIG_OUT_EN_HSCH3_S 2
/* LEDC_TIMER_SEL_HSCH3 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four high speed timers the two bits are used to select
one of them for high speed channel3. 2'b00: seletc hstimer0. 2'b01: select hstimer1. 2'b10: select hstimer2. 2'b11: select hstimer3.*/
#define LEDC_TIMER_SEL_HSCH3 0x00000003
#define LEDC_TIMER_SEL_HSCH3_M ((LEDC_TIMER_SEL_HSCH3_V)<<(LEDC_TIMER_SEL_HSCH3_S))
#define LEDC_TIMER_SEL_HSCH3_V 0x3
#define LEDC_TIMER_SEL_HSCH3_S 0
#define LEDC_HSCH3_HPOINT_REG (DR_REG_LEDC_BASE + 0x0040)
/* LEDC_HPOINT_HSCH3 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when htimerx(x=[0 3]) selected
by high speed channel3 has reached reg_hpoint_hsch3[19:0]*/
#define LEDC_HPOINT_HSCH3 0x000FFFFF
#define LEDC_HPOINT_HSCH3_M ((LEDC_HPOINT_HSCH3_V)<<(LEDC_HPOINT_HSCH3_S))
#define LEDC_HPOINT_HSCH3_V 0xFFFFF
#define LEDC_HPOINT_HSCH3_S 0
#define LEDC_HSCH3_DUTY_REG (DR_REG_LEDC_BASE + 0x0044)
/* LEDC_DUTY_HSCH3 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When hstimerx(x=[0
3]) choosed by high speed channel3 has reached reg_lpoint_hsch3 the output signal changes to low. reg_lpoint_hsch3=(reg_hpoint_hsch3[19:0]+reg_duty_hsch3[24:4]) (1) reg_lpoint_hsch3=(reg_hpoint_hsch3[19:0]+reg_duty_hsch3[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_HSCH3 0x01FFFFFF
#define LEDC_DUTY_HSCH3_M ((LEDC_DUTY_HSCH3_V)<<(LEDC_DUTY_HSCH3_S))
#define LEDC_DUTY_HSCH3_V 0x1FFFFFF
#define LEDC_DUTY_HSCH3_S 0
#define LEDC_HSCH3_CONF1_REG (DR_REG_LEDC_BASE + 0x0048)
/* LEDC_DUTY_START_HSCH3 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch3 reg_duty_cycle_hsch3 and reg_duty_scale_hsch3
has been configured. these register won't take effect until set reg_duty_start_hsch3. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_HSCH3 (BIT(31))
#define LEDC_DUTY_START_HSCH3_M (BIT(31))
#define LEDC_DUTY_START_HSCH3_V 0x1
#define LEDC_DUTY_START_HSCH3_S 31
/* LEDC_DUTY_INC_HSCH3 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for high speed channel3.*/
#define LEDC_DUTY_INC_HSCH3 (BIT(30))
#define LEDC_DUTY_INC_HSCH3_M (BIT(30))
#define LEDC_DUTY_INC_HSCH3_V 0x1
#define LEDC_DUTY_INC_HSCH3_S 30
/* LEDC_DUTY_NUM_HSCH3 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for high speed channel3.*/
#define LEDC_DUTY_NUM_HSCH3 0x000003FF
#define LEDC_DUTY_NUM_HSCH3_M ((LEDC_DUTY_NUM_HSCH3_V)<<(LEDC_DUTY_NUM_HSCH3_S))
#define LEDC_DUTY_NUM_HSCH3_V 0x3FF
#define LEDC_DUTY_NUM_HSCH3_S 20
/* LEDC_DUTY_CYCLE_HSCH3 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_hsch3 cycles for high speed channel3.*/
#define LEDC_DUTY_CYCLE_HSCH3 0x000003FF
#define LEDC_DUTY_CYCLE_HSCH3_M ((LEDC_DUTY_CYCLE_HSCH3_V)<<(LEDC_DUTY_CYCLE_HSCH3_S))
#define LEDC_DUTY_CYCLE_HSCH3_V 0x3FF
#define LEDC_DUTY_CYCLE_HSCH3_S 10
/* LEDC_DUTY_SCALE_HSCH3 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
high speed channel3.*/
#define LEDC_DUTY_SCALE_HSCH3 0x000003FF
#define LEDC_DUTY_SCALE_HSCH3_M ((LEDC_DUTY_SCALE_HSCH3_V)<<(LEDC_DUTY_SCALE_HSCH3_S))
#define LEDC_DUTY_SCALE_HSCH3_V 0x3FF
#define LEDC_DUTY_SCALE_HSCH3_S 0
#define LEDC_HSCH3_DUTY_R_REG (DR_REG_LEDC_BASE + 0x004C)
/* LEDC_DUTY_HSCH3 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for high speed channel3.*/
#define LEDC_DUTY_HSCH3 0x01FFFFFF
#define LEDC_DUTY_HSCH3_M ((LEDC_DUTY_HSCH3_V)<<(LEDC_DUTY_HSCH3_S))
#define LEDC_DUTY_HSCH3_V 0x1FFFFFF
#define LEDC_DUTY_HSCH3_S 0
#define LEDC_HSCH4_CONF0_REG (DR_REG_LEDC_BASE + 0x0050)
/* LEDC_IDLE_LV_HSCH4 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when high speed channel4 is off.*/
#define LEDC_IDLE_LV_HSCH4 (BIT(3))
#define LEDC_IDLE_LV_HSCH4_M (BIT(3))
#define LEDC_IDLE_LV_HSCH4_V 0x1
#define LEDC_IDLE_LV_HSCH4_S 3
/* LEDC_SIG_OUT_EN_HSCH4 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for high speed channel4*/
#define LEDC_SIG_OUT_EN_HSCH4 (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH4_M (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH4_V 0x1
#define LEDC_SIG_OUT_EN_HSCH4_S 2
/* LEDC_TIMER_SEL_HSCH4 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four high speed timers the two bits are used to select
one of them for high speed channel4. 2'b00: seletc hstimer0. 2'b01: select hstimer1. 2'b10: select hstimer2. 2'b11: select hstimer3.*/
#define LEDC_TIMER_SEL_HSCH4 0x00000003
#define LEDC_TIMER_SEL_HSCH4_M ((LEDC_TIMER_SEL_HSCH4_V)<<(LEDC_TIMER_SEL_HSCH4_S))
#define LEDC_TIMER_SEL_HSCH4_V 0x3
#define LEDC_TIMER_SEL_HSCH4_S 0
#define LEDC_HSCH4_HPOINT_REG (DR_REG_LEDC_BASE + 0x0054)
/* LEDC_HPOINT_HSCH4 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when htimerx(x=[0 3]) selected
by high speed channel4 has reached reg_hpoint_hsch4[19:0]*/
#define LEDC_HPOINT_HSCH4 0x000FFFFF
#define LEDC_HPOINT_HSCH4_M ((LEDC_HPOINT_HSCH4_V)<<(LEDC_HPOINT_HSCH4_S))
#define LEDC_HPOINT_HSCH4_V 0xFFFFF
#define LEDC_HPOINT_HSCH4_S 0
#define LEDC_HSCH4_DUTY_REG (DR_REG_LEDC_BASE + 0x0058)
/* LEDC_DUTY_HSCH4 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When hstimerx(x=[0
3]) choosed by high speed channel4 has reached reg_lpoint_hsch4 the output signal changes to low. reg_lpoint_hsch4=(reg_hpoint_hsch4[19:0]+reg_duty_hsch4[24:4]) (1) reg_lpoint_hsch4=(reg_hpoint_hsch4[19:0]+reg_duty_hsch4[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_HSCH4 0x01FFFFFF
#define LEDC_DUTY_HSCH4_M ((LEDC_DUTY_HSCH4_V)<<(LEDC_DUTY_HSCH4_S))
#define LEDC_DUTY_HSCH4_V 0x1FFFFFF
#define LEDC_DUTY_HSCH4_S 0
#define LEDC_HSCH4_CONF1_REG (DR_REG_LEDC_BASE + 0x005C)
/* LEDC_DUTY_START_HSCH4 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch1 reg_duty_cycle_hsch1 and reg_duty_scale_hsch1
has been configured. these register won't take effect until set reg_duty_start_hsch1. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_HSCH4 (BIT(31))
#define LEDC_DUTY_START_HSCH4_M (BIT(31))
#define LEDC_DUTY_START_HSCH4_V 0x1
#define LEDC_DUTY_START_HSCH4_S 31
/* LEDC_DUTY_INC_HSCH4 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for high speed channel4.*/
#define LEDC_DUTY_INC_HSCH4 (BIT(30))
#define LEDC_DUTY_INC_HSCH4_M (BIT(30))
#define LEDC_DUTY_INC_HSCH4_V 0x1
#define LEDC_DUTY_INC_HSCH4_S 30
/* LEDC_DUTY_NUM_HSCH4 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for high speed channel1.*/
#define LEDC_DUTY_NUM_HSCH4 0x000003FF
#define LEDC_DUTY_NUM_HSCH4_M ((LEDC_DUTY_NUM_HSCH4_V)<<(LEDC_DUTY_NUM_HSCH4_S))
#define LEDC_DUTY_NUM_HSCH4_V 0x3FF
#define LEDC_DUTY_NUM_HSCH4_S 20
/* LEDC_DUTY_CYCLE_HSCH4 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_hsch4 cycles for high speed channel4.*/
#define LEDC_DUTY_CYCLE_HSCH4 0x000003FF
#define LEDC_DUTY_CYCLE_HSCH4_M ((LEDC_DUTY_CYCLE_HSCH4_V)<<(LEDC_DUTY_CYCLE_HSCH4_S))
#define LEDC_DUTY_CYCLE_HSCH4_V 0x3FF
#define LEDC_DUTY_CYCLE_HSCH4_S 10
/* LEDC_DUTY_SCALE_HSCH4 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
high speed channel4.*/
#define LEDC_DUTY_SCALE_HSCH4 0x000003FF
#define LEDC_DUTY_SCALE_HSCH4_M ((LEDC_DUTY_SCALE_HSCH4_V)<<(LEDC_DUTY_SCALE_HSCH4_S))
#define LEDC_DUTY_SCALE_HSCH4_V 0x3FF
#define LEDC_DUTY_SCALE_HSCH4_S 0
#define LEDC_HSCH4_DUTY_R_REG (DR_REG_LEDC_BASE + 0x0060)
/* LEDC_DUTY_HSCH4 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for high speed channel4.*/
#define LEDC_DUTY_HSCH4 0x01FFFFFF
#define LEDC_DUTY_HSCH4_M ((LEDC_DUTY_HSCH4_V)<<(LEDC_DUTY_HSCH4_S))
#define LEDC_DUTY_HSCH4_V 0x1FFFFFF
#define LEDC_DUTY_HSCH4_S 0
#define LEDC_HSCH5_CONF0_REG (DR_REG_LEDC_BASE + 0x0064)
/* LEDC_IDLE_LV_HSCH5 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when high speed channel5 is off.*/
#define LEDC_IDLE_LV_HSCH5 (BIT(3))
#define LEDC_IDLE_LV_HSCH5_M (BIT(3))
#define LEDC_IDLE_LV_HSCH5_V 0x1
#define LEDC_IDLE_LV_HSCH5_S 3
/* LEDC_SIG_OUT_EN_HSCH5 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for high speed channel5.*/
#define LEDC_SIG_OUT_EN_HSCH5 (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH5_M (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH5_V 0x1
#define LEDC_SIG_OUT_EN_HSCH5_S 2
/* LEDC_TIMER_SEL_HSCH5 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four high speed timers the two bits are used to select
one of them for high speed channel5. 2'b00: seletc hstimer0. 2'b01: select hstimer1. 2'b10: select hstimer2. 2'b11: select hstimer3.*/
#define LEDC_TIMER_SEL_HSCH5 0x00000003
#define LEDC_TIMER_SEL_HSCH5_M ((LEDC_TIMER_SEL_HSCH5_V)<<(LEDC_TIMER_SEL_HSCH5_S))
#define LEDC_TIMER_SEL_HSCH5_V 0x3
#define LEDC_TIMER_SEL_HSCH5_S 0
#define LEDC_HSCH5_HPOINT_REG (DR_REG_LEDC_BASE + 0x0068)
/* LEDC_HPOINT_HSCH5 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when htimerx(x=[0 3]) selected
by high speed channel5 has reached reg_hpoint_hsch5[19:0]*/
#define LEDC_HPOINT_HSCH5 0x000FFFFF
#define LEDC_HPOINT_HSCH5_M ((LEDC_HPOINT_HSCH5_V)<<(LEDC_HPOINT_HSCH5_S))
#define LEDC_HPOINT_HSCH5_V 0xFFFFF
#define LEDC_HPOINT_HSCH5_S 0
#define LEDC_HSCH5_DUTY_REG (DR_REG_LEDC_BASE + 0x006C)
/* LEDC_DUTY_HSCH5 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When hstimerx(x=[0
3]) choosed by high speed channel5 has reached reg_lpoint_hsch5 the output signal changes to low. reg_lpoint_hsch5=(reg_hpoint_hsch5[19:0]+reg_duty_hsch5[24:4]) (1) reg_lpoint_hsch5=(reg_hpoint_hsch5[19:0]+reg_duty_hsch5[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_HSCH5 0x01FFFFFF
#define LEDC_DUTY_HSCH5_M ((LEDC_DUTY_HSCH5_V)<<(LEDC_DUTY_HSCH5_S))
#define LEDC_DUTY_HSCH5_V 0x1FFFFFF
#define LEDC_DUTY_HSCH5_S 0
#define LEDC_HSCH5_CONF1_REG (DR_REG_LEDC_BASE + 0x0070)
/* LEDC_DUTY_START_HSCH5 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch5 reg_duty_cycle_hsch5 and reg_duty_scale_hsch5
has been configured. these register won't take effect until set reg_duty_start_hsch5. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_HSCH5 (BIT(31))
#define LEDC_DUTY_START_HSCH5_M (BIT(31))
#define LEDC_DUTY_START_HSCH5_V 0x1
#define LEDC_DUTY_START_HSCH5_S 31
/* LEDC_DUTY_INC_HSCH5 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for high speed channel5.*/
#define LEDC_DUTY_INC_HSCH5 (BIT(30))
#define LEDC_DUTY_INC_HSCH5_M (BIT(30))
#define LEDC_DUTY_INC_HSCH5_V 0x1
#define LEDC_DUTY_INC_HSCH5_S 30
/* LEDC_DUTY_NUM_HSCH5 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for high speed channel5.*/
#define LEDC_DUTY_NUM_HSCH5 0x000003FF
#define LEDC_DUTY_NUM_HSCH5_M ((LEDC_DUTY_NUM_HSCH5_V)<<(LEDC_DUTY_NUM_HSCH5_S))
#define LEDC_DUTY_NUM_HSCH5_V 0x3FF
#define LEDC_DUTY_NUM_HSCH5_S 20
/* LEDC_DUTY_CYCLE_HSCH5 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_hsch5 cycles for high speed channel5.*/
#define LEDC_DUTY_CYCLE_HSCH5 0x000003FF
#define LEDC_DUTY_CYCLE_HSCH5_M ((LEDC_DUTY_CYCLE_HSCH5_V)<<(LEDC_DUTY_CYCLE_HSCH5_S))
#define LEDC_DUTY_CYCLE_HSCH5_V 0x3FF
#define LEDC_DUTY_CYCLE_HSCH5_S 10
/* LEDC_DUTY_SCALE_HSCH5 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
high speed channel5.*/
#define LEDC_DUTY_SCALE_HSCH5 0x000003FF
#define LEDC_DUTY_SCALE_HSCH5_M ((LEDC_DUTY_SCALE_HSCH5_V)<<(LEDC_DUTY_SCALE_HSCH5_S))
#define LEDC_DUTY_SCALE_HSCH5_V 0x3FF
#define LEDC_DUTY_SCALE_HSCH5_S 0
#define LEDC_HSCH5_DUTY_R_REG (DR_REG_LEDC_BASE + 0x0074)
/* LEDC_DUTY_HSCH5 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for high speed channel5.*/
#define LEDC_DUTY_HSCH5 0x01FFFFFF
#define LEDC_DUTY_HSCH5_M ((LEDC_DUTY_HSCH5_V)<<(LEDC_DUTY_HSCH5_S))
#define LEDC_DUTY_HSCH5_V 0x1FFFFFF
#define LEDC_DUTY_HSCH5_S 0
#define LEDC_HSCH6_CONF0_REG (DR_REG_LEDC_BASE + 0x0078)
/* LEDC_IDLE_LV_HSCH6 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when high speed channel6 is off.*/
#define LEDC_IDLE_LV_HSCH6 (BIT(3))
#define LEDC_IDLE_LV_HSCH6_M (BIT(3))
#define LEDC_IDLE_LV_HSCH6_V 0x1
#define LEDC_IDLE_LV_HSCH6_S 3
/* LEDC_SIG_OUT_EN_HSCH6 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for high speed channel6*/
#define LEDC_SIG_OUT_EN_HSCH6 (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH6_M (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH6_V 0x1
#define LEDC_SIG_OUT_EN_HSCH6_S 2
/* LEDC_TIMER_SEL_HSCH6 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four high speed timers the two bits are used to select
one of them for high speed channel6. 2'b00: seletc hstimer0. 2'b01: select hstimer1. 2'b10: select hstimer2. 2'b11: select hstimer3.*/
#define LEDC_TIMER_SEL_HSCH6 0x00000003
#define LEDC_TIMER_SEL_HSCH6_M ((LEDC_TIMER_SEL_HSCH6_V)<<(LEDC_TIMER_SEL_HSCH6_S))
#define LEDC_TIMER_SEL_HSCH6_V 0x3
#define LEDC_TIMER_SEL_HSCH6_S 0
#define LEDC_HSCH6_HPOINT_REG (DR_REG_LEDC_BASE + 0x007C)
/* LEDC_HPOINT_HSCH6 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when htimerx(x=[0 3]) selected
by high speed channel6 has reached reg_hpoint_hsch6[19:0]*/
#define LEDC_HPOINT_HSCH6 0x000FFFFF
#define LEDC_HPOINT_HSCH6_M ((LEDC_HPOINT_HSCH6_V)<<(LEDC_HPOINT_HSCH6_S))
#define LEDC_HPOINT_HSCH6_V 0xFFFFF
#define LEDC_HPOINT_HSCH6_S 0
#define LEDC_HSCH6_DUTY_REG (DR_REG_LEDC_BASE + 0x0080)
/* LEDC_DUTY_HSCH6 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When hstimerx(x=[0
3]) choosed by high speed channel6 has reached reg_lpoint_hsch6 the output signal changes to low. reg_lpoint_hsch6=(reg_hpoint_hsch6[19:0]+reg_duty_hsch6[24:4]) (1) reg_lpoint_hsch6=(reg_hpoint_hsch6[19:0]+reg_duty_hsch6[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_HSCH6 0x01FFFFFF
#define LEDC_DUTY_HSCH6_M ((LEDC_DUTY_HSCH6_V)<<(LEDC_DUTY_HSCH6_S))
#define LEDC_DUTY_HSCH6_V 0x1FFFFFF
#define LEDC_DUTY_HSCH6_S 0
#define LEDC_HSCH6_CONF1_REG (DR_REG_LEDC_BASE + 0x0084)
/* LEDC_DUTY_START_HSCH6 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch1 reg_duty_cycle_hsch1 and reg_duty_scale_hsch1
has been configured. these register won't take effect until set reg_duty_start_hsch1. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_HSCH6 (BIT(31))
#define LEDC_DUTY_START_HSCH6_M (BIT(31))
#define LEDC_DUTY_START_HSCH6_V 0x1
#define LEDC_DUTY_START_HSCH6_S 31
/* LEDC_DUTY_INC_HSCH6 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for high speed channel6.*/
#define LEDC_DUTY_INC_HSCH6 (BIT(30))
#define LEDC_DUTY_INC_HSCH6_M (BIT(30))
#define LEDC_DUTY_INC_HSCH6_V 0x1
#define LEDC_DUTY_INC_HSCH6_S 30
/* LEDC_DUTY_NUM_HSCH6 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for high speed channel6.*/
#define LEDC_DUTY_NUM_HSCH6 0x000003FF
#define LEDC_DUTY_NUM_HSCH6_M ((LEDC_DUTY_NUM_HSCH6_V)<<(LEDC_DUTY_NUM_HSCH6_S))
#define LEDC_DUTY_NUM_HSCH6_V 0x3FF
#define LEDC_DUTY_NUM_HSCH6_S 20
/* LEDC_DUTY_CYCLE_HSCH6 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_hsch6 cycles for high speed channel6.*/
#define LEDC_DUTY_CYCLE_HSCH6 0x000003FF
#define LEDC_DUTY_CYCLE_HSCH6_M ((LEDC_DUTY_CYCLE_HSCH6_V)<<(LEDC_DUTY_CYCLE_HSCH6_S))
#define LEDC_DUTY_CYCLE_HSCH6_V 0x3FF
#define LEDC_DUTY_CYCLE_HSCH6_S 10
/* LEDC_DUTY_SCALE_HSCH6 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
high speed channel6.*/
#define LEDC_DUTY_SCALE_HSCH6 0x000003FF
#define LEDC_DUTY_SCALE_HSCH6_M ((LEDC_DUTY_SCALE_HSCH6_V)<<(LEDC_DUTY_SCALE_HSCH6_S))
#define LEDC_DUTY_SCALE_HSCH6_V 0x3FF
#define LEDC_DUTY_SCALE_HSCH6_S 0
#define LEDC_HSCH6_DUTY_R_REG (DR_REG_LEDC_BASE + 0x0088)
/* LEDC_DUTY_HSCH6 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for high speed channel6.*/
#define LEDC_DUTY_HSCH6 0x01FFFFFF
#define LEDC_DUTY_HSCH6_M ((LEDC_DUTY_HSCH6_V)<<(LEDC_DUTY_HSCH6_S))
#define LEDC_DUTY_HSCH6_V 0x1FFFFFF
#define LEDC_DUTY_HSCH6_S 0
#define LEDC_HSCH7_CONF0_REG (DR_REG_LEDC_BASE + 0x008C)
/* LEDC_IDLE_LV_HSCH7 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when high speed channel7 is off.*/
#define LEDC_IDLE_LV_HSCH7 (BIT(3))
#define LEDC_IDLE_LV_HSCH7_M (BIT(3))
#define LEDC_IDLE_LV_HSCH7_V 0x1
#define LEDC_IDLE_LV_HSCH7_S 3
/* LEDC_SIG_OUT_EN_HSCH7 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for high speed channel7.*/
#define LEDC_SIG_OUT_EN_HSCH7 (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH7_M (BIT(2))
#define LEDC_SIG_OUT_EN_HSCH7_V 0x1
#define LEDC_SIG_OUT_EN_HSCH7_S 2
/* LEDC_TIMER_SEL_HSCH7 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four high speed timers the two bits are used to select
one of them for high speed channel7. 2'b00: seletc hstimer0. 2'b01: select hstimer1. 2'b10: select hstimer2. 2'b11: select hstimer3.*/
#define LEDC_TIMER_SEL_HSCH7 0x00000003
#define LEDC_TIMER_SEL_HSCH7_M ((LEDC_TIMER_SEL_HSCH7_V)<<(LEDC_TIMER_SEL_HSCH7_S))
#define LEDC_TIMER_SEL_HSCH7_V 0x3
#define LEDC_TIMER_SEL_HSCH7_S 0
#define LEDC_HSCH7_HPOINT_REG (DR_REG_LEDC_BASE + 0x0090)
/* LEDC_HPOINT_HSCH7 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when htimerx(x=[0 3]) selected
by high speed channel7 has reached reg_hpoint_hsch7[19:0]*/
#define LEDC_HPOINT_HSCH7 0x000FFFFF
#define LEDC_HPOINT_HSCH7_M ((LEDC_HPOINT_HSCH7_V)<<(LEDC_HPOINT_HSCH7_S))
#define LEDC_HPOINT_HSCH7_V 0xFFFFF
#define LEDC_HPOINT_HSCH7_S 0
#define LEDC_HSCH7_DUTY_REG (DR_REG_LEDC_BASE + 0x0094)
/* LEDC_DUTY_HSCH7 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When hstimerx(x=[0
3]) choosed by high speed channel7 has reached reg_lpoint_hsch7 the output signal changes to low. reg_lpoint_hsch7=(reg_hpoint_hsch7[19:0]+reg_duty_hsch7[24:4]) (1) reg_lpoint_hsch7=(reg_hpoint_hsch7[19:0]+reg_duty_hsch7[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_HSCH7 0x01FFFFFF
#define LEDC_DUTY_HSCH7_M ((LEDC_DUTY_HSCH7_V)<<(LEDC_DUTY_HSCH7_S))
#define LEDC_DUTY_HSCH7_V 0x1FFFFFF
#define LEDC_DUTY_HSCH7_S 0
#define LEDC_HSCH7_CONF1_REG (DR_REG_LEDC_BASE + 0x0098)
/* LEDC_DUTY_START_HSCH7 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch1 reg_duty_cycle_hsch1 and reg_duty_scale_hsch1
has been configured. these register won't take effect until set reg_duty_start_hsch1. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_HSCH7 (BIT(31))
#define LEDC_DUTY_START_HSCH7_M (BIT(31))
#define LEDC_DUTY_START_HSCH7_V 0x1
#define LEDC_DUTY_START_HSCH7_S 31
/* LEDC_DUTY_INC_HSCH7 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for high speed channel6.*/
#define LEDC_DUTY_INC_HSCH7 (BIT(30))
#define LEDC_DUTY_INC_HSCH7_M (BIT(30))
#define LEDC_DUTY_INC_HSCH7_V 0x1
#define LEDC_DUTY_INC_HSCH7_S 30
/* LEDC_DUTY_NUM_HSCH7 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for high speed channel6.*/
#define LEDC_DUTY_NUM_HSCH7 0x000003FF
#define LEDC_DUTY_NUM_HSCH7_M ((LEDC_DUTY_NUM_HSCH7_V)<<(LEDC_DUTY_NUM_HSCH7_S))
#define LEDC_DUTY_NUM_HSCH7_V 0x3FF
#define LEDC_DUTY_NUM_HSCH7_S 20
/* LEDC_DUTY_CYCLE_HSCH7 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_hsch7 cycles for high speed channel7.*/
#define LEDC_DUTY_CYCLE_HSCH7 0x000003FF
#define LEDC_DUTY_CYCLE_HSCH7_M ((LEDC_DUTY_CYCLE_HSCH7_V)<<(LEDC_DUTY_CYCLE_HSCH7_S))
#define LEDC_DUTY_CYCLE_HSCH7_V 0x3FF
#define LEDC_DUTY_CYCLE_HSCH7_S 10
/* LEDC_DUTY_SCALE_HSCH7 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
high speed channel7.*/
#define LEDC_DUTY_SCALE_HSCH7 0x000003FF
#define LEDC_DUTY_SCALE_HSCH7_M ((LEDC_DUTY_SCALE_HSCH7_V)<<(LEDC_DUTY_SCALE_HSCH7_S))
#define LEDC_DUTY_SCALE_HSCH7_V 0x3FF
#define LEDC_DUTY_SCALE_HSCH7_S 0
#define LEDC_HSCH7_DUTY_R_REG (DR_REG_LEDC_BASE + 0x009C)
/* LEDC_DUTY_HSCH7 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for high speed channel7.*/
#define LEDC_DUTY_HSCH7 0x01FFFFFF
#define LEDC_DUTY_HSCH7_M ((LEDC_DUTY_HSCH7_V)<<(LEDC_DUTY_HSCH7_S))
#define LEDC_DUTY_HSCH7_V 0x1FFFFFF
#define LEDC_DUTY_HSCH7_S 0
#define LEDC_LSCH0_CONF0_REG (DR_REG_LEDC_BASE + 0x00A0)
/* LEDC_PARA_UP_LSCH0 : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: This bit is used to update register LEDC_LSCH0_HPOINT and LEDC_LSCH0_DUTY
for low speed channel0.*/
#define LEDC_PARA_UP_LSCH0 (BIT(4))
#define LEDC_PARA_UP_LSCH0_M (BIT(4))
#define LEDC_PARA_UP_LSCH0_V 0x1
#define LEDC_PARA_UP_LSCH0_S 4
/* LEDC_IDLE_LV_LSCH0 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when low speed channel0 is off.*/
#define LEDC_IDLE_LV_LSCH0 (BIT(3))
#define LEDC_IDLE_LV_LSCH0_M (BIT(3))
#define LEDC_IDLE_LV_LSCH0_V 0x1
#define LEDC_IDLE_LV_LSCH0_S 3
/* LEDC_SIG_OUT_EN_LSCH0 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for low speed channel0.*/
#define LEDC_SIG_OUT_EN_LSCH0 (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH0_M (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH0_V 0x1
#define LEDC_SIG_OUT_EN_LSCH0_S 2
/* LEDC_TIMER_SEL_LSCH0 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four low speed timers the two bits are used to select
one of them for low speed channel0. 2'b00: seletc lstimer0. 2'b01: select lstimer1. 2'b10: select lstimer2. 2'b11: select lstimer3.*/
#define LEDC_TIMER_SEL_LSCH0 0x00000003
#define LEDC_TIMER_SEL_LSCH0_M ((LEDC_TIMER_SEL_LSCH0_V)<<(LEDC_TIMER_SEL_LSCH0_S))
#define LEDC_TIMER_SEL_LSCH0_V 0x3
#define LEDC_TIMER_SEL_LSCH0_S 0
#define LEDC_LSCH0_HPOINT_REG (DR_REG_LEDC_BASE + 0x00A4)
/* LEDC_HPOINT_LSCH0 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when lstimerx(x=[0 3]) selected
by low speed channel0 has reached reg_hpoint_lsch0[19:0]*/
#define LEDC_HPOINT_LSCH0 0x000FFFFF
#define LEDC_HPOINT_LSCH0_M ((LEDC_HPOINT_LSCH0_V)<<(LEDC_HPOINT_LSCH0_S))
#define LEDC_HPOINT_LSCH0_V 0xFFFFF
#define LEDC_HPOINT_LSCH0_S 0
#define LEDC_LSCH0_DUTY_REG (DR_REG_LEDC_BASE + 0x00A8)
/* LEDC_DUTY_LSCH0 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When lstimerx(x=[0
3]) choosed by low speed channel0 has reached reg_lpoint_lsch0 the output signal changes to low. reg_lpoint_lsch0=(reg_hpoint_lsch0[19:0]+reg_duty_lsch0[24:4]) (1) reg_lpoint_lsch0=(reg_hpoint_lsch0[19:0]+reg_duty_lsch0[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_LSCH0 0x01FFFFFF
#define LEDC_DUTY_LSCH0_M ((LEDC_DUTY_LSCH0_V)<<(LEDC_DUTY_LSCH0_S))
#define LEDC_DUTY_LSCH0_V 0x1FFFFFF
#define LEDC_DUTY_LSCH0_S 0
#define LEDC_LSCH0_CONF1_REG (DR_REG_LEDC_BASE + 0x00AC)
/* LEDC_DUTY_START_LSCH0 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch1 reg_duty_cycle_hsch1 and reg_duty_scale_hsch1
has been configured. these register won't take effect until set reg_duty_start_hsch1. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_LSCH0 (BIT(31))
#define LEDC_DUTY_START_LSCH0_M (BIT(31))
#define LEDC_DUTY_START_LSCH0_V 0x1
#define LEDC_DUTY_START_LSCH0_S 31
/* LEDC_DUTY_INC_LSCH0 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for low speed channel6.*/
#define LEDC_DUTY_INC_LSCH0 (BIT(30))
#define LEDC_DUTY_INC_LSCH0_M (BIT(30))
#define LEDC_DUTY_INC_LSCH0_V 0x1
#define LEDC_DUTY_INC_LSCH0_S 30
/* LEDC_DUTY_NUM_LSCH0 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for low speed channel6.*/
#define LEDC_DUTY_NUM_LSCH0 0x000003FF
#define LEDC_DUTY_NUM_LSCH0_M ((LEDC_DUTY_NUM_LSCH0_V)<<(LEDC_DUTY_NUM_LSCH0_S))
#define LEDC_DUTY_NUM_LSCH0_V 0x3FF
#define LEDC_DUTY_NUM_LSCH0_S 20
/* LEDC_DUTY_CYCLE_LSCH0 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_lsch0 cycles for low speed channel0.*/
#define LEDC_DUTY_CYCLE_LSCH0 0x000003FF
#define LEDC_DUTY_CYCLE_LSCH0_M ((LEDC_DUTY_CYCLE_LSCH0_V)<<(LEDC_DUTY_CYCLE_LSCH0_S))
#define LEDC_DUTY_CYCLE_LSCH0_V 0x3FF
#define LEDC_DUTY_CYCLE_LSCH0_S 10
/* LEDC_DUTY_SCALE_LSCH0 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
low speed channel0.*/
#define LEDC_DUTY_SCALE_LSCH0 0x000003FF
#define LEDC_DUTY_SCALE_LSCH0_M ((LEDC_DUTY_SCALE_LSCH0_V)<<(LEDC_DUTY_SCALE_LSCH0_S))
#define LEDC_DUTY_SCALE_LSCH0_V 0x3FF
#define LEDC_DUTY_SCALE_LSCH0_S 0
#define LEDC_LSCH0_DUTY_R_REG (DR_REG_LEDC_BASE + 0x00B0)
/* LEDC_DUTY_LSCH0 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for low speed channel0.*/
#define LEDC_DUTY_LSCH0 0x01FFFFFF
#define LEDC_DUTY_LSCH0_M ((LEDC_DUTY_LSCH0_V)<<(LEDC_DUTY_LSCH0_S))
#define LEDC_DUTY_LSCH0_V 0x1FFFFFF
#define LEDC_DUTY_LSCH0_S 0
#define LEDC_LSCH1_CONF0_REG (DR_REG_LEDC_BASE + 0x00B4)
/* LEDC_PARA_UP_LSCH1 : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: This bit is used to update register LEDC_LSCH1_HPOINT and LEDC_LSCH1_DUTY
for low speed channel1.*/
#define LEDC_PARA_UP_LSCH1 (BIT(4))
#define LEDC_PARA_UP_LSCH1_M (BIT(4))
#define LEDC_PARA_UP_LSCH1_V 0x1
#define LEDC_PARA_UP_LSCH1_S 4
/* LEDC_IDLE_LV_LSCH1 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when low speed channel1 is off.*/
#define LEDC_IDLE_LV_LSCH1 (BIT(3))
#define LEDC_IDLE_LV_LSCH1_M (BIT(3))
#define LEDC_IDLE_LV_LSCH1_V 0x1
#define LEDC_IDLE_LV_LSCH1_S 3
/* LEDC_SIG_OUT_EN_LSCH1 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for low speed channel1.*/
#define LEDC_SIG_OUT_EN_LSCH1 (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH1_M (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH1_V 0x1
#define LEDC_SIG_OUT_EN_LSCH1_S 2
/* LEDC_TIMER_SEL_LSCH1 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four low speed timers the two bits are used to select
one of them for low speed channel1. 2'b00: seletc lstimer0. 2'b01: select lstimer1. 2'b10: select lstimer2. 2'b11: select lstimer3.*/
#define LEDC_TIMER_SEL_LSCH1 0x00000003
#define LEDC_TIMER_SEL_LSCH1_M ((LEDC_TIMER_SEL_LSCH1_V)<<(LEDC_TIMER_SEL_LSCH1_S))
#define LEDC_TIMER_SEL_LSCH1_V 0x3
#define LEDC_TIMER_SEL_LSCH1_S 0
#define LEDC_LSCH1_HPOINT_REG (DR_REG_LEDC_BASE + 0x00B8)
/* LEDC_HPOINT_LSCH1 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when lstimerx(x=[0 3]) selected
by low speed channel1 has reached reg_hpoint_lsch1[19:0]*/
#define LEDC_HPOINT_LSCH1 0x000FFFFF
#define LEDC_HPOINT_LSCH1_M ((LEDC_HPOINT_LSCH1_V)<<(LEDC_HPOINT_LSCH1_S))
#define LEDC_HPOINT_LSCH1_V 0xFFFFF
#define LEDC_HPOINT_LSCH1_S 0
#define LEDC_LSCH1_DUTY_REG (DR_REG_LEDC_BASE + 0x00BC)
/* LEDC_DUTY_LSCH1 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When lstimerx(x=[0
3]) choosed by low speed channel1 has reached reg_lpoint_lsch1 the output signal changes to low. reg_lpoint_lsch1=(reg_hpoint_lsch1[19:0]+reg_duty_lsch1[24:4]) (1) reg_lpoint_lsch1=(reg_hpoint_lsch1[19:0]+reg_duty_lsch1[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_LSCH1 0x01FFFFFF
#define LEDC_DUTY_LSCH1_M ((LEDC_DUTY_LSCH1_V)<<(LEDC_DUTY_LSCH1_S))
#define LEDC_DUTY_LSCH1_V 0x1FFFFFF
#define LEDC_DUTY_LSCH1_S 0
#define LEDC_LSCH1_CONF1_REG (DR_REG_LEDC_BASE + 0x00C0)
/* LEDC_DUTY_START_LSCH1 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch1 reg_duty_cycle_hsch1 and reg_duty_scale_hsch1
has been configured. these register won't take effect until set reg_duty_start_hsch1. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_LSCH1 (BIT(31))
#define LEDC_DUTY_START_LSCH1_M (BIT(31))
#define LEDC_DUTY_START_LSCH1_V 0x1
#define LEDC_DUTY_START_LSCH1_S 31
/* LEDC_DUTY_INC_LSCH1 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for low speed channel1.*/
#define LEDC_DUTY_INC_LSCH1 (BIT(30))
#define LEDC_DUTY_INC_LSCH1_M (BIT(30))
#define LEDC_DUTY_INC_LSCH1_V 0x1
#define LEDC_DUTY_INC_LSCH1_S 30
/* LEDC_DUTY_NUM_LSCH1 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for low speed channel1.*/
#define LEDC_DUTY_NUM_LSCH1 0x000003FF
#define LEDC_DUTY_NUM_LSCH1_M ((LEDC_DUTY_NUM_LSCH1_V)<<(LEDC_DUTY_NUM_LSCH1_S))
#define LEDC_DUTY_NUM_LSCH1_V 0x3FF
#define LEDC_DUTY_NUM_LSCH1_S 20
/* LEDC_DUTY_CYCLE_LSCH1 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_lsch1 cycles for low speed channel1.*/
#define LEDC_DUTY_CYCLE_LSCH1 0x000003FF
#define LEDC_DUTY_CYCLE_LSCH1_M ((LEDC_DUTY_CYCLE_LSCH1_V)<<(LEDC_DUTY_CYCLE_LSCH1_S))
#define LEDC_DUTY_CYCLE_LSCH1_V 0x3FF
#define LEDC_DUTY_CYCLE_LSCH1_S 10
/* LEDC_DUTY_SCALE_LSCH1 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
low speed channel1.*/
#define LEDC_DUTY_SCALE_LSCH1 0x000003FF
#define LEDC_DUTY_SCALE_LSCH1_M ((LEDC_DUTY_SCALE_LSCH1_V)<<(LEDC_DUTY_SCALE_LSCH1_S))
#define LEDC_DUTY_SCALE_LSCH1_V 0x3FF
#define LEDC_DUTY_SCALE_LSCH1_S 0
#define LEDC_LSCH1_DUTY_R_REG (DR_REG_LEDC_BASE + 0x00C4)
/* LEDC_DUTY_LSCH1 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for low speed channel1.*/
#define LEDC_DUTY_LSCH1 0x01FFFFFF
#define LEDC_DUTY_LSCH1_M ((LEDC_DUTY_LSCH1_V)<<(LEDC_DUTY_LSCH1_S))
#define LEDC_DUTY_LSCH1_V 0x1FFFFFF
#define LEDC_DUTY_LSCH1_S 0
#define LEDC_LSCH2_CONF0_REG (DR_REG_LEDC_BASE + 0x00C8)
/* LEDC_PARA_UP_LSCH2 : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: This bit is used to update register LEDC_LSCH2_HPOINT and LEDC_LSCH2_DUTY
for low speed channel2.*/
#define LEDC_PARA_UP_LSCH2 (BIT(4))
#define LEDC_PARA_UP_LSCH2_M (BIT(4))
#define LEDC_PARA_UP_LSCH2_V 0x1
#define LEDC_PARA_UP_LSCH2_S 4
/* LEDC_IDLE_LV_LSCH2 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when low speed channel2 is off.*/
#define LEDC_IDLE_LV_LSCH2 (BIT(3))
#define LEDC_IDLE_LV_LSCH2_M (BIT(3))
#define LEDC_IDLE_LV_LSCH2_V 0x1
#define LEDC_IDLE_LV_LSCH2_S 3
/* LEDC_SIG_OUT_EN_LSCH2 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for low speed channel2.*/
#define LEDC_SIG_OUT_EN_LSCH2 (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH2_M (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH2_V 0x1
#define LEDC_SIG_OUT_EN_LSCH2_S 2
/* LEDC_TIMER_SEL_LSCH2 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four low speed timers the two bits are used to select
one of them for low speed channel2. 2'b00: seletc lstimer0. 2'b01: select lstimer1. 2'b10: select lstimer2. 2'b11: select lstimer3.*/
#define LEDC_TIMER_SEL_LSCH2 0x00000003
#define LEDC_TIMER_SEL_LSCH2_M ((LEDC_TIMER_SEL_LSCH2_V)<<(LEDC_TIMER_SEL_LSCH2_S))
#define LEDC_TIMER_SEL_LSCH2_V 0x3
#define LEDC_TIMER_SEL_LSCH2_S 0
#define LEDC_LSCH2_HPOINT_REG (DR_REG_LEDC_BASE + 0x00CC)
/* LEDC_HPOINT_LSCH2 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when lstimerx(x=[0 3]) selected
by low speed channel2 has reached reg_hpoint_lsch2[19:0]*/
#define LEDC_HPOINT_LSCH2 0x000FFFFF
#define LEDC_HPOINT_LSCH2_M ((LEDC_HPOINT_LSCH2_V)<<(LEDC_HPOINT_LSCH2_S))
#define LEDC_HPOINT_LSCH2_V 0xFFFFF
#define LEDC_HPOINT_LSCH2_S 0
#define LEDC_LSCH2_DUTY_REG (DR_REG_LEDC_BASE + 0x00D0)
/* LEDC_DUTY_LSCH2 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When lstimerx(x=[0
3]) choosed by low speed channel2 has reached reg_lpoint_lsch2 the output signal changes to low. reg_lpoint_lsch2=(reg_hpoint_lsch2[19:0]+reg_duty_lsch2[24:4]) (1) reg_lpoint_lsch2=(reg_hpoint_lsch2[19:0]+reg_duty_lsch2[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_LSCH2 0x01FFFFFF
#define LEDC_DUTY_LSCH2_M ((LEDC_DUTY_LSCH2_V)<<(LEDC_DUTY_LSCH2_S))
#define LEDC_DUTY_LSCH2_V 0x1FFFFFF
#define LEDC_DUTY_LSCH2_S 0
#define LEDC_LSCH2_CONF1_REG (DR_REG_LEDC_BASE + 0x00D4)
/* LEDC_DUTY_START_LSCH2 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch2 reg_duty_cycle_hsch2 and reg_duty_scale_hsch2
has been configured. these register won't take effect until set reg_duty_start_hsch2. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_LSCH2 (BIT(31))
#define LEDC_DUTY_START_LSCH2_M (BIT(31))
#define LEDC_DUTY_START_LSCH2_V 0x1
#define LEDC_DUTY_START_LSCH2_S 31
/* LEDC_DUTY_INC_LSCH2 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for low speed channel2.*/
#define LEDC_DUTY_INC_LSCH2 (BIT(30))
#define LEDC_DUTY_INC_LSCH2_M (BIT(30))
#define LEDC_DUTY_INC_LSCH2_V 0x1
#define LEDC_DUTY_INC_LSCH2_S 30
/* LEDC_DUTY_NUM_LSCH2 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for low speed channel2.*/
#define LEDC_DUTY_NUM_LSCH2 0x000003FF
#define LEDC_DUTY_NUM_LSCH2_M ((LEDC_DUTY_NUM_LSCH2_V)<<(LEDC_DUTY_NUM_LSCH2_S))
#define LEDC_DUTY_NUM_LSCH2_V 0x3FF
#define LEDC_DUTY_NUM_LSCH2_S 20
/* LEDC_DUTY_CYCLE_LSCH2 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_lsch2 cycles for low speed channel2.*/
#define LEDC_DUTY_CYCLE_LSCH2 0x000003FF
#define LEDC_DUTY_CYCLE_LSCH2_M ((LEDC_DUTY_CYCLE_LSCH2_V)<<(LEDC_DUTY_CYCLE_LSCH2_S))
#define LEDC_DUTY_CYCLE_LSCH2_V 0x3FF
#define LEDC_DUTY_CYCLE_LSCH2_S 10
/* LEDC_DUTY_SCALE_LSCH2 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
low speed channel2.*/
#define LEDC_DUTY_SCALE_LSCH2 0x000003FF
#define LEDC_DUTY_SCALE_LSCH2_M ((LEDC_DUTY_SCALE_LSCH2_V)<<(LEDC_DUTY_SCALE_LSCH2_S))
#define LEDC_DUTY_SCALE_LSCH2_V 0x3FF
#define LEDC_DUTY_SCALE_LSCH2_S 0
#define LEDC_LSCH2_DUTY_R_REG (DR_REG_LEDC_BASE + 0x00D8)
/* LEDC_DUTY_LSCH2 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for low speed channel2.*/
#define LEDC_DUTY_LSCH2 0x01FFFFFF
#define LEDC_DUTY_LSCH2_M ((LEDC_DUTY_LSCH2_V)<<(LEDC_DUTY_LSCH2_S))
#define LEDC_DUTY_LSCH2_V 0x1FFFFFF
#define LEDC_DUTY_LSCH2_S 0
#define LEDC_LSCH3_CONF0_REG (DR_REG_LEDC_BASE + 0x00DC)
/* LEDC_PARA_UP_LSCH3 : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: This bit is used to update register LEDC_LSCH3_HPOINT and LEDC_LSCH3_DUTY
for low speed channel3.*/
#define LEDC_PARA_UP_LSCH3 (BIT(4))
#define LEDC_PARA_UP_LSCH3_M (BIT(4))
#define LEDC_PARA_UP_LSCH3_V 0x1
#define LEDC_PARA_UP_LSCH3_S 4
/* LEDC_IDLE_LV_LSCH3 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when low speed channel3 is off.*/
#define LEDC_IDLE_LV_LSCH3 (BIT(3))
#define LEDC_IDLE_LV_LSCH3_M (BIT(3))
#define LEDC_IDLE_LV_LSCH3_V 0x1
#define LEDC_IDLE_LV_LSCH3_S 3
/* LEDC_SIG_OUT_EN_LSCH3 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for low speed channel3.*/
#define LEDC_SIG_OUT_EN_LSCH3 (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH3_M (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH3_V 0x1
#define LEDC_SIG_OUT_EN_LSCH3_S 2
/* LEDC_TIMER_SEL_LSCH3 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four low speed timers the two bits are used to select
one of them for low speed channel3. 2'b00: seletc lstimer0. 2'b01: select lstimer1. 2'b10: select lstimer2. 2'b11: select lstimer3.*/
#define LEDC_TIMER_SEL_LSCH3 0x00000003
#define LEDC_TIMER_SEL_LSCH3_M ((LEDC_TIMER_SEL_LSCH3_V)<<(LEDC_TIMER_SEL_LSCH3_S))
#define LEDC_TIMER_SEL_LSCH3_V 0x3
#define LEDC_TIMER_SEL_LSCH3_S 0
#define LEDC_LSCH3_HPOINT_REG (DR_REG_LEDC_BASE + 0x00E0)
/* LEDC_HPOINT_LSCH3 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when lstimerx(x=[0 3]) selected
by low speed channel3 has reached reg_hpoint_lsch3[19:0]*/
#define LEDC_HPOINT_LSCH3 0x000FFFFF
#define LEDC_HPOINT_LSCH3_M ((LEDC_HPOINT_LSCH3_V)<<(LEDC_HPOINT_LSCH3_S))
#define LEDC_HPOINT_LSCH3_V 0xFFFFF
#define LEDC_HPOINT_LSCH3_S 0
#define LEDC_LSCH3_DUTY_REG (DR_REG_LEDC_BASE + 0x00E4)
/* LEDC_DUTY_LSCH3 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When lstimerx(x=[0
3]) choosed by low speed channel3 has reached reg_lpoint_lsch3 the output signal changes to low. reg_lpoint_lsch3=(reg_hpoint_lsch3[19:0]+reg_duty_lsch3[24:4]) (1) reg_lpoint_lsch3=(reg_hpoint_lsch3[19:0]+reg_duty_lsch3[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_LSCH3 0x01FFFFFF
#define LEDC_DUTY_LSCH3_M ((LEDC_DUTY_LSCH3_V)<<(LEDC_DUTY_LSCH3_S))
#define LEDC_DUTY_LSCH3_V 0x1FFFFFF
#define LEDC_DUTY_LSCH3_S 0
#define LEDC_LSCH3_CONF1_REG (DR_REG_LEDC_BASE + 0x00E8)
/* LEDC_DUTY_START_LSCH3 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch3 reg_duty_cycle_hsch3 and reg_duty_scale_hsch3
has been configured. these register won't take effect until set reg_duty_start_hsch3. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_LSCH3 (BIT(31))
#define LEDC_DUTY_START_LSCH3_M (BIT(31))
#define LEDC_DUTY_START_LSCH3_V 0x1
#define LEDC_DUTY_START_LSCH3_S 31
/* LEDC_DUTY_INC_LSCH3 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for low speed channel3.*/
#define LEDC_DUTY_INC_LSCH3 (BIT(30))
#define LEDC_DUTY_INC_LSCH3_M (BIT(30))
#define LEDC_DUTY_INC_LSCH3_V 0x1
#define LEDC_DUTY_INC_LSCH3_S 30
/* LEDC_DUTY_NUM_LSCH3 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for low speed channel3.*/
#define LEDC_DUTY_NUM_LSCH3 0x000003FF
#define LEDC_DUTY_NUM_LSCH3_M ((LEDC_DUTY_NUM_LSCH3_V)<<(LEDC_DUTY_NUM_LSCH3_S))
#define LEDC_DUTY_NUM_LSCH3_V 0x3FF
#define LEDC_DUTY_NUM_LSCH3_S 20
/* LEDC_DUTY_CYCLE_LSCH3 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_lsch3 cycles for low speed channel3.*/
#define LEDC_DUTY_CYCLE_LSCH3 0x000003FF
#define LEDC_DUTY_CYCLE_LSCH3_M ((LEDC_DUTY_CYCLE_LSCH3_V)<<(LEDC_DUTY_CYCLE_LSCH3_S))
#define LEDC_DUTY_CYCLE_LSCH3_V 0x3FF
#define LEDC_DUTY_CYCLE_LSCH3_S 10
/* LEDC_DUTY_SCALE_LSCH3 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
low speed channel3.*/
#define LEDC_DUTY_SCALE_LSCH3 0x000003FF
#define LEDC_DUTY_SCALE_LSCH3_M ((LEDC_DUTY_SCALE_LSCH3_V)<<(LEDC_DUTY_SCALE_LSCH3_S))
#define LEDC_DUTY_SCALE_LSCH3_V 0x3FF
#define LEDC_DUTY_SCALE_LSCH3_S 0
#define LEDC_LSCH3_DUTY_R_REG (DR_REG_LEDC_BASE + 0x00EC)
/* LEDC_DUTY_LSCH3 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for low speed channel3.*/
#define LEDC_DUTY_LSCH3 0x01FFFFFF
#define LEDC_DUTY_LSCH3_M ((LEDC_DUTY_LSCH3_V)<<(LEDC_DUTY_LSCH3_S))
#define LEDC_DUTY_LSCH3_V 0x1FFFFFF
#define LEDC_DUTY_LSCH3_S 0
#define LEDC_LSCH4_CONF0_REG (DR_REG_LEDC_BASE + 0x00F0)
/* LEDC_PARA_UP_LSCH4 : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: This bit is used to update register LEDC_LSCH4_HPOINT and LEDC_LSCH4_DUTY
for low speed channel4.*/
#define LEDC_PARA_UP_LSCH4 (BIT(4))
#define LEDC_PARA_UP_LSCH4_M (BIT(4))
#define LEDC_PARA_UP_LSCH4_V 0x1
#define LEDC_PARA_UP_LSCH4_S 4
/* LEDC_IDLE_LV_LSCH4 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when low speed channel4 is off.*/
#define LEDC_IDLE_LV_LSCH4 (BIT(3))
#define LEDC_IDLE_LV_LSCH4_M (BIT(3))
#define LEDC_IDLE_LV_LSCH4_V 0x1
#define LEDC_IDLE_LV_LSCH4_S 3
/* LEDC_SIG_OUT_EN_LSCH4 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for low speed channel4.*/
#define LEDC_SIG_OUT_EN_LSCH4 (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH4_M (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH4_V 0x1
#define LEDC_SIG_OUT_EN_LSCH4_S 2
/* LEDC_TIMER_SEL_LSCH4 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four low speed timers the two bits are used to select
one of them for low speed channel4. 2'b00: seletc lstimer0. 2'b01: select lstimer1. 2'b10: select lstimer2. 2'b11: select lstimer3.*/
#define LEDC_TIMER_SEL_LSCH4 0x00000003
#define LEDC_TIMER_SEL_LSCH4_M ((LEDC_TIMER_SEL_LSCH4_V)<<(LEDC_TIMER_SEL_LSCH4_S))
#define LEDC_TIMER_SEL_LSCH4_V 0x3
#define LEDC_TIMER_SEL_LSCH4_S 0
#define LEDC_LSCH4_HPOINT_REG (DR_REG_LEDC_BASE + 0x00F4)
/* LEDC_HPOINT_LSCH4 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when lstimerx(x=[0 3]) selected
by low speed channel4 has reached reg_hpoint_lsch4[19:0]*/
#define LEDC_HPOINT_LSCH4 0x000FFFFF
#define LEDC_HPOINT_LSCH4_M ((LEDC_HPOINT_LSCH4_V)<<(LEDC_HPOINT_LSCH4_S))
#define LEDC_HPOINT_LSCH4_V 0xFFFFF
#define LEDC_HPOINT_LSCH4_S 0
#define LEDC_LSCH4_DUTY_REG (DR_REG_LEDC_BASE + 0x00F8)
/* LEDC_DUTY_LSCH4 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When lstimerx(x=[0
3]) choosed by low speed channel4 has reached reg_lpoint_lsch4 the output signal changes to low. reg_lpoint_lsch4=(reg_hpoint_lsch4[19:0]+reg_duty_lsch4[24:4]) (1) reg_lpoint_lsch4=(reg_hpoint_lsch4[19:0]+reg_duty_lsch4[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_LSCH4 0x01FFFFFF
#define LEDC_DUTY_LSCH4_M ((LEDC_DUTY_LSCH4_V)<<(LEDC_DUTY_LSCH4_S))
#define LEDC_DUTY_LSCH4_V 0x1FFFFFF
#define LEDC_DUTY_LSCH4_S 0
#define LEDC_LSCH4_CONF1_REG (DR_REG_LEDC_BASE + 0x00FC)
/* LEDC_DUTY_START_LSCH4 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch4 reg_duty_cycle_hsch4 and reg_duty_scale_hsch4
has been configured. these register won't take effect until set reg_duty_start_hsch4. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_LSCH4 (BIT(31))
#define LEDC_DUTY_START_LSCH4_M (BIT(31))
#define LEDC_DUTY_START_LSCH4_V 0x1
#define LEDC_DUTY_START_LSCH4_S 31
/* LEDC_DUTY_INC_LSCH4 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for low speed channel4.*/
#define LEDC_DUTY_INC_LSCH4 (BIT(30))
#define LEDC_DUTY_INC_LSCH4_M (BIT(30))
#define LEDC_DUTY_INC_LSCH4_V 0x1
#define LEDC_DUTY_INC_LSCH4_S 30
/* LEDC_DUTY_NUM_LSCH4 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for low speed channel4.*/
#define LEDC_DUTY_NUM_LSCH4 0x000003FF
#define LEDC_DUTY_NUM_LSCH4_M ((LEDC_DUTY_NUM_LSCH4_V)<<(LEDC_DUTY_NUM_LSCH4_S))
#define LEDC_DUTY_NUM_LSCH4_V 0x3FF
#define LEDC_DUTY_NUM_LSCH4_S 20
/* LEDC_DUTY_CYCLE_LSCH4 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_lsch4 cycles for low speed channel4.*/
#define LEDC_DUTY_CYCLE_LSCH4 0x000003FF
#define LEDC_DUTY_CYCLE_LSCH4_M ((LEDC_DUTY_CYCLE_LSCH4_V)<<(LEDC_DUTY_CYCLE_LSCH4_S))
#define LEDC_DUTY_CYCLE_LSCH4_V 0x3FF
#define LEDC_DUTY_CYCLE_LSCH4_S 10
/* LEDC_DUTY_SCALE_LSCH4 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
low speed channel4.*/
#define LEDC_DUTY_SCALE_LSCH4 0x000003FF
#define LEDC_DUTY_SCALE_LSCH4_M ((LEDC_DUTY_SCALE_LSCH4_V)<<(LEDC_DUTY_SCALE_LSCH4_S))
#define LEDC_DUTY_SCALE_LSCH4_V 0x3FF
#define LEDC_DUTY_SCALE_LSCH4_S 0
#define LEDC_LSCH4_DUTY_R_REG (DR_REG_LEDC_BASE + 0x0100)
/* LEDC_DUTY_LSCH4 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for low speed channel4.*/
#define LEDC_DUTY_LSCH4 0x01FFFFFF
#define LEDC_DUTY_LSCH4_M ((LEDC_DUTY_LSCH4_V)<<(LEDC_DUTY_LSCH4_S))
#define LEDC_DUTY_LSCH4_V 0x1FFFFFF
#define LEDC_DUTY_LSCH4_S 0
#define LEDC_LSCH5_CONF0_REG (DR_REG_LEDC_BASE + 0x0104)
/* LEDC_PARA_UP_LSCH5 : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: This bit is used to update register LEDC_LSCH5_HPOINT and LEDC_LSCH5_DUTY
for low speed channel5.*/
#define LEDC_PARA_UP_LSCH5 (BIT(4))
#define LEDC_PARA_UP_LSCH5_M (BIT(4))
#define LEDC_PARA_UP_LSCH5_V 0x1
#define LEDC_PARA_UP_LSCH5_S 4
/* LEDC_IDLE_LV_LSCH5 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when low speed channel5 is off.*/
#define LEDC_IDLE_LV_LSCH5 (BIT(3))
#define LEDC_IDLE_LV_LSCH5_M (BIT(3))
#define LEDC_IDLE_LV_LSCH5_V 0x1
#define LEDC_IDLE_LV_LSCH5_S 3
/* LEDC_SIG_OUT_EN_LSCH5 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for low speed channel5.*/
#define LEDC_SIG_OUT_EN_LSCH5 (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH5_M (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH5_V 0x1
#define LEDC_SIG_OUT_EN_LSCH5_S 2
/* LEDC_TIMER_SEL_LSCH5 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four low speed timers the two bits are used to select
one of them for low speed channel5. 2'b00: seletc lstimer0. 2'b01: select lstimer1. 2'b10: select lstimer2. 2'b11: select lstimer3.*/
#define LEDC_TIMER_SEL_LSCH5 0x00000003
#define LEDC_TIMER_SEL_LSCH5_M ((LEDC_TIMER_SEL_LSCH5_V)<<(LEDC_TIMER_SEL_LSCH5_S))
#define LEDC_TIMER_SEL_LSCH5_V 0x3
#define LEDC_TIMER_SEL_LSCH5_S 0
#define LEDC_LSCH5_HPOINT_REG (DR_REG_LEDC_BASE + 0x0108)
/* LEDC_HPOINT_LSCH5 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when lstimerx(x=[0 3]) selected
by low speed channel5 has reached reg_hpoint_lsch5[19:0]*/
#define LEDC_HPOINT_LSCH5 0x000FFFFF
#define LEDC_HPOINT_LSCH5_M ((LEDC_HPOINT_LSCH5_V)<<(LEDC_HPOINT_LSCH5_S))
#define LEDC_HPOINT_LSCH5_V 0xFFFFF
#define LEDC_HPOINT_LSCH5_S 0
#define LEDC_LSCH5_DUTY_REG (DR_REG_LEDC_BASE + 0x010C)
/* LEDC_DUTY_LSCH5 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When lstimerx(x=[0
3]) choosed by low speed channel5 has reached reg_lpoint_lsch5 the output signal changes to low. reg_lpoint_lsch5=(reg_hpoint_lsch5[19:0]+reg_duty_lsch5[24:4]) (1) reg_lpoint_lsch5=(reg_hpoint_lsch5[19:0]+reg_duty_lsch5[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_LSCH5 0x01FFFFFF
#define LEDC_DUTY_LSCH5_M ((LEDC_DUTY_LSCH5_V)<<(LEDC_DUTY_LSCH5_S))
#define LEDC_DUTY_LSCH5_V 0x1FFFFFF
#define LEDC_DUTY_LSCH5_S 0
#define LEDC_LSCH5_CONF1_REG (DR_REG_LEDC_BASE + 0x0110)
/* LEDC_DUTY_START_LSCH5 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch4 reg_duty_cycle_hsch4 and reg_duty_scale_hsch4
has been configured. these register won't take effect until set reg_duty_start_hsch4. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_LSCH5 (BIT(31))
#define LEDC_DUTY_START_LSCH5_M (BIT(31))
#define LEDC_DUTY_START_LSCH5_V 0x1
#define LEDC_DUTY_START_LSCH5_S 31
/* LEDC_DUTY_INC_LSCH5 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for low speed channel5.*/
#define LEDC_DUTY_INC_LSCH5 (BIT(30))
#define LEDC_DUTY_INC_LSCH5_M (BIT(30))
#define LEDC_DUTY_INC_LSCH5_V 0x1
#define LEDC_DUTY_INC_LSCH5_S 30
/* LEDC_DUTY_NUM_LSCH5 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for low speed channel5.*/
#define LEDC_DUTY_NUM_LSCH5 0x000003FF
#define LEDC_DUTY_NUM_LSCH5_M ((LEDC_DUTY_NUM_LSCH5_V)<<(LEDC_DUTY_NUM_LSCH5_S))
#define LEDC_DUTY_NUM_LSCH5_V 0x3FF
#define LEDC_DUTY_NUM_LSCH5_S 20
/* LEDC_DUTY_CYCLE_LSCH5 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_lsch5 cycles for low speed channel4.*/
#define LEDC_DUTY_CYCLE_LSCH5 0x000003FF
#define LEDC_DUTY_CYCLE_LSCH5_M ((LEDC_DUTY_CYCLE_LSCH5_V)<<(LEDC_DUTY_CYCLE_LSCH5_S))
#define LEDC_DUTY_CYCLE_LSCH5_V 0x3FF
#define LEDC_DUTY_CYCLE_LSCH5_S 10
/* LEDC_DUTY_SCALE_LSCH5 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
low speed channel5.*/
#define LEDC_DUTY_SCALE_LSCH5 0x000003FF
#define LEDC_DUTY_SCALE_LSCH5_M ((LEDC_DUTY_SCALE_LSCH5_V)<<(LEDC_DUTY_SCALE_LSCH5_S))
#define LEDC_DUTY_SCALE_LSCH5_V 0x3FF
#define LEDC_DUTY_SCALE_LSCH5_S 0
#define LEDC_LSCH5_DUTY_R_REG (DR_REG_LEDC_BASE + 0x0114)
/* LEDC_DUTY_LSCH5 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for low speed channel5.*/
#define LEDC_DUTY_LSCH5 0x01FFFFFF
#define LEDC_DUTY_LSCH5_M ((LEDC_DUTY_LSCH5_V)<<(LEDC_DUTY_LSCH5_S))
#define LEDC_DUTY_LSCH5_V 0x1FFFFFF
#define LEDC_DUTY_LSCH5_S 0
#define LEDC_LSCH6_CONF0_REG (DR_REG_LEDC_BASE + 0x0118)
/* LEDC_PARA_UP_LSCH6 : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: This bit is used to update register LEDC_LSCH6_HPOINT and LEDC_LSCH6_DUTY
for low speed channel6.*/
#define LEDC_PARA_UP_LSCH6 (BIT(4))
#define LEDC_PARA_UP_LSCH6_M (BIT(4))
#define LEDC_PARA_UP_LSCH6_V 0x1
#define LEDC_PARA_UP_LSCH6_S 4
/* LEDC_IDLE_LV_LSCH6 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when low speed channel6 is off.*/
#define LEDC_IDLE_LV_LSCH6 (BIT(3))
#define LEDC_IDLE_LV_LSCH6_M (BIT(3))
#define LEDC_IDLE_LV_LSCH6_V 0x1
#define LEDC_IDLE_LV_LSCH6_S 3
/* LEDC_SIG_OUT_EN_LSCH6 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for low speed channel6.*/
#define LEDC_SIG_OUT_EN_LSCH6 (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH6_M (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH6_V 0x1
#define LEDC_SIG_OUT_EN_LSCH6_S 2
/* LEDC_TIMER_SEL_LSCH6 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four low speed timers the two bits are used to select
one of them for low speed channel6. 2'b00: seletc lstimer0. 2'b01: select lstimer1. 2'b10: select lstimer2. 2'b11: select lstimer3.*/
#define LEDC_TIMER_SEL_LSCH6 0x00000003
#define LEDC_TIMER_SEL_LSCH6_M ((LEDC_TIMER_SEL_LSCH6_V)<<(LEDC_TIMER_SEL_LSCH6_S))
#define LEDC_TIMER_SEL_LSCH6_V 0x3
#define LEDC_TIMER_SEL_LSCH6_S 0
#define LEDC_LSCH6_HPOINT_REG (DR_REG_LEDC_BASE + 0x011C)
/* LEDC_HPOINT_LSCH6 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when lstimerx(x=[0 3]) selected
by low speed channel6 has reached reg_hpoint_lsch6[19:0]*/
#define LEDC_HPOINT_LSCH6 0x000FFFFF
#define LEDC_HPOINT_LSCH6_M ((LEDC_HPOINT_LSCH6_V)<<(LEDC_HPOINT_LSCH6_S))
#define LEDC_HPOINT_LSCH6_V 0xFFFFF
#define LEDC_HPOINT_LSCH6_S 0
#define LEDC_LSCH6_DUTY_REG (DR_REG_LEDC_BASE + 0x0120)
/* LEDC_DUTY_LSCH6 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When lstimerx(x=[0
3]) choosed by low speed channel6 has reached reg_lpoint_lsch6 the output signal changes to low. reg_lpoint_lsch6=(reg_hpoint_lsch6[19:0]+reg_duty_lsch6[24:4]) (1) reg_lpoint_lsch6=(reg_hpoint_lsch6[19:0]+reg_duty_lsch6[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_LSCH6 0x01FFFFFF
#define LEDC_DUTY_LSCH6_M ((LEDC_DUTY_LSCH6_V)<<(LEDC_DUTY_LSCH6_S))
#define LEDC_DUTY_LSCH6_V 0x1FFFFFF
#define LEDC_DUTY_LSCH6_S 0
#define LEDC_LSCH6_CONF1_REG (DR_REG_LEDC_BASE + 0x0124)
/* LEDC_DUTY_START_LSCH6 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch6 reg_duty_cycle_hsch6 and reg_duty_scale_hsch6
has been configured. these register won't take effect until set reg_duty_start_hsch6. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_LSCH6 (BIT(31))
#define LEDC_DUTY_START_LSCH6_M (BIT(31))
#define LEDC_DUTY_START_LSCH6_V 0x1
#define LEDC_DUTY_START_LSCH6_S 31
/* LEDC_DUTY_INC_LSCH6 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for low speed channel6.*/
#define LEDC_DUTY_INC_LSCH6 (BIT(30))
#define LEDC_DUTY_INC_LSCH6_M (BIT(30))
#define LEDC_DUTY_INC_LSCH6_V 0x1
#define LEDC_DUTY_INC_LSCH6_S 30
/* LEDC_DUTY_NUM_LSCH6 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for low speed channel6.*/
#define LEDC_DUTY_NUM_LSCH6 0x000003FF
#define LEDC_DUTY_NUM_LSCH6_M ((LEDC_DUTY_NUM_LSCH6_V)<<(LEDC_DUTY_NUM_LSCH6_S))
#define LEDC_DUTY_NUM_LSCH6_V 0x3FF
#define LEDC_DUTY_NUM_LSCH6_S 20
/* LEDC_DUTY_CYCLE_LSCH6 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_lsch6 cycles for low speed channel6.*/
#define LEDC_DUTY_CYCLE_LSCH6 0x000003FF
#define LEDC_DUTY_CYCLE_LSCH6_M ((LEDC_DUTY_CYCLE_LSCH6_V)<<(LEDC_DUTY_CYCLE_LSCH6_S))
#define LEDC_DUTY_CYCLE_LSCH6_V 0x3FF
#define LEDC_DUTY_CYCLE_LSCH6_S 10
/* LEDC_DUTY_SCALE_LSCH6 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
low speed channel6.*/
#define LEDC_DUTY_SCALE_LSCH6 0x000003FF
#define LEDC_DUTY_SCALE_LSCH6_M ((LEDC_DUTY_SCALE_LSCH6_V)<<(LEDC_DUTY_SCALE_LSCH6_S))
#define LEDC_DUTY_SCALE_LSCH6_V 0x3FF
#define LEDC_DUTY_SCALE_LSCH6_S 0
#define LEDC_LSCH6_DUTY_R_REG (DR_REG_LEDC_BASE + 0x0128)
/* LEDC_DUTY_LSCH6 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for low speed channel6.*/
#define LEDC_DUTY_LSCH6 0x01FFFFFF
#define LEDC_DUTY_LSCH6_M ((LEDC_DUTY_LSCH6_V)<<(LEDC_DUTY_LSCH6_S))
#define LEDC_DUTY_LSCH6_V 0x1FFFFFF
#define LEDC_DUTY_LSCH6_S 0
#define LEDC_LSCH7_CONF0_REG (DR_REG_LEDC_BASE + 0x012C)
/* LEDC_PARA_UP_LSCH7 : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: This bit is used to update register LEDC_LSCH7_HPOINT and LEDC_LSCH7_DUTY
for low speed channel7.*/
#define LEDC_PARA_UP_LSCH7 (BIT(4))
#define LEDC_PARA_UP_LSCH7_M (BIT(4))
#define LEDC_PARA_UP_LSCH7_V 0x1
#define LEDC_PARA_UP_LSCH7_S 4
/* LEDC_IDLE_LV_LSCH7 : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: This bit is used to control the output value when low speed channel7 is off.*/
#define LEDC_IDLE_LV_LSCH7 (BIT(3))
#define LEDC_IDLE_LV_LSCH7_M (BIT(3))
#define LEDC_IDLE_LV_LSCH7_V 0x1
#define LEDC_IDLE_LV_LSCH7_S 3
/* LEDC_SIG_OUT_EN_LSCH7 : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: This is the output enable control bit for low speed channel7.*/
#define LEDC_SIG_OUT_EN_LSCH7 (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH7_M (BIT(2))
#define LEDC_SIG_OUT_EN_LSCH7_V 0x1
#define LEDC_SIG_OUT_EN_LSCH7_S 2
/* LEDC_TIMER_SEL_LSCH7 : R/W ;bitpos:[1:0] ;default: 2'd0 ; */
/*description: There are four low speed timers the two bits are used to select
one of them for low speed channel7. 2'b00: seletc lstimer0. 2'b01: select lstimer1. 2'b10: select lstimer2. 2'b11: select lstimer3.*/
#define LEDC_TIMER_SEL_LSCH7 0x00000003
#define LEDC_TIMER_SEL_LSCH7_M ((LEDC_TIMER_SEL_LSCH7_V)<<(LEDC_TIMER_SEL_LSCH7_S))
#define LEDC_TIMER_SEL_LSCH7_V 0x3
#define LEDC_TIMER_SEL_LSCH7_S 0
#define LEDC_LSCH7_HPOINT_REG (DR_REG_LEDC_BASE + 0x0130)
/* LEDC_HPOINT_LSCH7 : R/W ;bitpos:[19:0] ;default: 20'h0 ; */
/*description: The output value changes to high when lstimerx(x=[0 3]) selected
by low speed channel7 has reached reg_hpoint_lsch7[19:0]*/
#define LEDC_HPOINT_LSCH7 0x000FFFFF
#define LEDC_HPOINT_LSCH7_M ((LEDC_HPOINT_LSCH7_V)<<(LEDC_HPOINT_LSCH7_S))
#define LEDC_HPOINT_LSCH7_V 0xFFFFF
#define LEDC_HPOINT_LSCH7_S 0
#define LEDC_LSCH7_DUTY_REG (DR_REG_LEDC_BASE + 0x0134)
/* LEDC_DUTY_LSCH7 : R/W ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: The register is used to control output duty. When lstimerx(x=[0
3]) choosed by low speed channel7 has reached reg_lpoint_lsch7 the output signal changes to low. reg_lpoint_lsch7=(reg_hpoint_lsch7[19:0]+reg_duty_lsch7[24:4]) (1) reg_lpoint_lsch7=(reg_hpoint_lsch7[19:0]+reg_duty_lsch7[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
#define LEDC_DUTY_LSCH7 0x01FFFFFF
#define LEDC_DUTY_LSCH7_M ((LEDC_DUTY_LSCH7_V)<<(LEDC_DUTY_LSCH7_S))
#define LEDC_DUTY_LSCH7_V 0x1FFFFFF
#define LEDC_DUTY_LSCH7_S 0
#define LEDC_LSCH7_CONF1_REG (DR_REG_LEDC_BASE + 0x0138)
/* LEDC_DUTY_START_LSCH7 : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When reg_duty_num_hsch4 reg_duty_cycle_hsch4 and reg_duty_scale_hsch4
has been configured. these register won't take effect until set reg_duty_start_hsch4. this bit is automatically cleared by hardware.*/
#define LEDC_DUTY_START_LSCH7 (BIT(31))
#define LEDC_DUTY_START_LSCH7_M (BIT(31))
#define LEDC_DUTY_START_LSCH7_V 0x1
#define LEDC_DUTY_START_LSCH7_S 31
/* LEDC_DUTY_INC_LSCH7 : R/W ;bitpos:[30] ;default: 1'b1 ; */
/*description: This register is used to increase the duty of output signal or
decrease the duty of output signal for low speed channel4.*/
#define LEDC_DUTY_INC_LSCH7 (BIT(30))
#define LEDC_DUTY_INC_LSCH7_M (BIT(30))
#define LEDC_DUTY_INC_LSCH7_V 0x1
#define LEDC_DUTY_INC_LSCH7_S 30
/* LEDC_DUTY_NUM_LSCH7 : R/W ;bitpos:[29:20] ;default: 10'h0 ; */
/*description: This register is used to control the num of increased or decreased
times for low speed channel4.*/
#define LEDC_DUTY_NUM_LSCH7 0x000003FF
#define LEDC_DUTY_NUM_LSCH7_M ((LEDC_DUTY_NUM_LSCH7_V)<<(LEDC_DUTY_NUM_LSCH7_S))
#define LEDC_DUTY_NUM_LSCH7_V 0x3FF
#define LEDC_DUTY_NUM_LSCH7_S 20
/* LEDC_DUTY_CYCLE_LSCH7 : R/W ;bitpos:[19:10] ;default: 10'h0 ; */
/*description: This register is used to increase or decrease the duty every
reg_duty_cycle_lsch7 cycles for low speed channel7.*/
#define LEDC_DUTY_CYCLE_LSCH7 0x000003FF
#define LEDC_DUTY_CYCLE_LSCH7_M ((LEDC_DUTY_CYCLE_LSCH7_V)<<(LEDC_DUTY_CYCLE_LSCH7_S))
#define LEDC_DUTY_CYCLE_LSCH7_V 0x3FF
#define LEDC_DUTY_CYCLE_LSCH7_S 10
/* LEDC_DUTY_SCALE_LSCH7 : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: This register controls the increase or decrease step scale for
low speed channel7.*/
#define LEDC_DUTY_SCALE_LSCH7 0x000003FF
#define LEDC_DUTY_SCALE_LSCH7_M ((LEDC_DUTY_SCALE_LSCH7_V)<<(LEDC_DUTY_SCALE_LSCH7_S))
#define LEDC_DUTY_SCALE_LSCH7_V 0x3FF
#define LEDC_DUTY_SCALE_LSCH7_S 0
#define LEDC_LSCH7_DUTY_R_REG (DR_REG_LEDC_BASE + 0x013C)
/* LEDC_DUTY_LSCH7 : RO ;bitpos:[24:0] ;default: 25'h0 ; */
/*description: This register represents the current duty of the output signal
for low speed channel7.*/
#define LEDC_DUTY_LSCH7 0x01FFFFFF
#define LEDC_DUTY_LSCH7_M ((LEDC_DUTY_LSCH7_V)<<(LEDC_DUTY_LSCH7_S))
#define LEDC_DUTY_LSCH7_V 0x1FFFFFF
#define LEDC_DUTY_LSCH7_S 0
#define LEDC_HSTIMER0_CONF_REG (DR_REG_LEDC_BASE + 0x0140)
/* LEDC_TICK_SEL_HSTIMER0 : R/W ;bitpos:[25] ;default: 1'b0 ; */
/*description: This bit is used to choose apb_clk or ref_tick for high speed
timer0. 1'b1:apb_clk 0:ref_tick*/
#define LEDC_TICK_SEL_HSTIMER0 (BIT(25))
#define LEDC_TICK_SEL_HSTIMER0_M (BIT(25))
#define LEDC_TICK_SEL_HSTIMER0_V 0x1
#define LEDC_TICK_SEL_HSTIMER0_S 25
/* LEDC_HSTIMER0_RST : R/W ;bitpos:[24] ;default: 1'b1 ; */
/*description: This bit is used to reset high speed timer0 the counter will be 0 after reset.*/
#define LEDC_HSTIMER0_RST (BIT(24))
#define LEDC_HSTIMER0_RST_M (BIT(24))
#define LEDC_HSTIMER0_RST_V 0x1
#define LEDC_HSTIMER0_RST_S 24
/* LEDC_HSTIMER0_PAUSE : R/W ;bitpos:[23] ;default: 1'b0 ; */
/*description: This bit is used to pause the counter in high speed timer0*/
#define LEDC_HSTIMER0_PAUSE (BIT(23))
#define LEDC_HSTIMER0_PAUSE_M (BIT(23))
#define LEDC_HSTIMER0_PAUSE_V 0x1
#define LEDC_HSTIMER0_PAUSE_S 23
/* LEDC_DIV_NUM_HSTIMER0 : R/W ;bitpos:[22:5] ;default: 18'h0 ; */
/*description: This register is used to configure parameter for divider in high
speed timer0 the least significant eight bits represent the decimal part.*/
#define LEDC_DIV_NUM_HSTIMER0 0x0003FFFF
#define LEDC_DIV_NUM_HSTIMER0_M ((LEDC_DIV_NUM_HSTIMER0_V)<<(LEDC_DIV_NUM_HSTIMER0_S))
#define LEDC_DIV_NUM_HSTIMER0_V 0x3FFFF
#define LEDC_DIV_NUM_HSTIMER0_S 5
/* LEDC_HSTIMER0_LIM : R/W ;bitpos:[4:0] ;default: 5'h0 ; */
/*description: This register controls the range of the counter in high speed
timer0. the counter range is [0 2**reg_hstimer0_lim] the max bit width for counter is 20.*/
#define LEDC_HSTIMER0_LIM 0x0000001F
#define LEDC_HSTIMER0_LIM_M ((LEDC_HSTIMER0_LIM_V)<<(LEDC_HSTIMER0_LIM_S))
#define LEDC_HSTIMER0_LIM_V 0x1F
#define LEDC_HSTIMER0_LIM_S 0
#define LEDC_HSTIMER0_VALUE_REG (DR_REG_LEDC_BASE + 0x0144)
/* LEDC_HSTIMER0_CNT : RO ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: software can read this register to get the current counter value
in high speed timer0*/
#define LEDC_HSTIMER0_CNT 0x000FFFFF
#define LEDC_HSTIMER0_CNT_M ((LEDC_HSTIMER0_CNT_V)<<(LEDC_HSTIMER0_CNT_S))
#define LEDC_HSTIMER0_CNT_V 0xFFFFF
#define LEDC_HSTIMER0_CNT_S 0
#define LEDC_HSTIMER1_CONF_REG (DR_REG_LEDC_BASE + 0x0148)
/* LEDC_TICK_SEL_HSTIMER1 : R/W ;bitpos:[25] ;default: 1'b0 ; */
/*description: This bit is used to choose apb_clk or ref_tick for high speed
timer1. 1'b1:apb_clk 0:ref_tick*/
#define LEDC_TICK_SEL_HSTIMER1 (BIT(25))
#define LEDC_TICK_SEL_HSTIMER1_M (BIT(25))
#define LEDC_TICK_SEL_HSTIMER1_V 0x1
#define LEDC_TICK_SEL_HSTIMER1_S 25
/* LEDC_HSTIMER1_RST : R/W ;bitpos:[24] ;default: 1'b1 ; */
/*description: This bit is used to reset high speed timer1 the counter will be 0 after reset.*/
#define LEDC_HSTIMER1_RST (BIT(24))
#define LEDC_HSTIMER1_RST_M (BIT(24))
#define LEDC_HSTIMER1_RST_V 0x1
#define LEDC_HSTIMER1_RST_S 24
/* LEDC_HSTIMER1_PAUSE : R/W ;bitpos:[23] ;default: 1'b0 ; */
/*description: This bit is used to pause the counter in high speed timer1*/
#define LEDC_HSTIMER1_PAUSE (BIT(23))
#define LEDC_HSTIMER1_PAUSE_M (BIT(23))
#define LEDC_HSTIMER1_PAUSE_V 0x1
#define LEDC_HSTIMER1_PAUSE_S 23
/* LEDC_DIV_NUM_HSTIMER1 : R/W ;bitpos:[22:5] ;default: 18'h0 ; */
/*description: This register is used to configure parameter for divider in high
speed timer1 the least significant eight bits represent the decimal part.*/
#define LEDC_DIV_NUM_HSTIMER1 0x0003FFFF
#define LEDC_DIV_NUM_HSTIMER1_M ((LEDC_DIV_NUM_HSTIMER1_V)<<(LEDC_DIV_NUM_HSTIMER1_S))
#define LEDC_DIV_NUM_HSTIMER1_V 0x3FFFF
#define LEDC_DIV_NUM_HSTIMER1_S 5
/* LEDC_HSTIMER1_LIM : R/W ;bitpos:[4:0] ;default: 5'h0 ; */
/*description: This register controls the range of the counter in high speed
timer1. the counter range is [0 2**reg_hstimer1_lim] the max bit width for counter is 20.*/
#define LEDC_HSTIMER1_LIM 0x0000001F
#define LEDC_HSTIMER1_LIM_M ((LEDC_HSTIMER1_LIM_V)<<(LEDC_HSTIMER1_LIM_S))
#define LEDC_HSTIMER1_LIM_V 0x1F
#define LEDC_HSTIMER1_LIM_S 0
#define LEDC_HSTIMER1_VALUE_REG (DR_REG_LEDC_BASE + 0x014C)
/* LEDC_HSTIMER1_CNT : RO ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: software can read this register to get the current counter value
in high speed timer1.*/
#define LEDC_HSTIMER1_CNT 0x000FFFFF
#define LEDC_HSTIMER1_CNT_M ((LEDC_HSTIMER1_CNT_V)<<(LEDC_HSTIMER1_CNT_S))
#define LEDC_HSTIMER1_CNT_V 0xFFFFF
#define LEDC_HSTIMER1_CNT_S 0
#define LEDC_HSTIMER2_CONF_REG (DR_REG_LEDC_BASE + 0x0150)
/* LEDC_TICK_SEL_HSTIMER2 : R/W ;bitpos:[25] ;default: 1'b0 ; */
/*description: This bit is used to choose apb_clk or ref_tick for high speed
timer2. 1'b1:apb_clk 0:ref_tick*/
#define LEDC_TICK_SEL_HSTIMER2 (BIT(25))
#define LEDC_TICK_SEL_HSTIMER2_M (BIT(25))
#define LEDC_TICK_SEL_HSTIMER2_V 0x1
#define LEDC_TICK_SEL_HSTIMER2_S 25
/* LEDC_HSTIMER2_RST : R/W ;bitpos:[24] ;default: 1'b1 ; */
/*description: This bit is used to reset high speed timer2 the counter will be 0 after reset.*/
#define LEDC_HSTIMER2_RST (BIT(24))
#define LEDC_HSTIMER2_RST_M (BIT(24))
#define LEDC_HSTIMER2_RST_V 0x1
#define LEDC_HSTIMER2_RST_S 24
/* LEDC_HSTIMER2_PAUSE : R/W ;bitpos:[23] ;default: 1'b0 ; */
/*description: This bit is used to pause the counter in high speed timer2*/
#define LEDC_HSTIMER2_PAUSE (BIT(23))
#define LEDC_HSTIMER2_PAUSE_M (BIT(23))
#define LEDC_HSTIMER2_PAUSE_V 0x1
#define LEDC_HSTIMER2_PAUSE_S 23
/* LEDC_DIV_NUM_HSTIMER2 : R/W ;bitpos:[22:5] ;default: 18'h0 ; */
/*description: This register is used to configure parameter for divider in high
speed timer2 the least significant eight bits represent the decimal part.*/
#define LEDC_DIV_NUM_HSTIMER2 0x0003FFFF
#define LEDC_DIV_NUM_HSTIMER2_M ((LEDC_DIV_NUM_HSTIMER2_V)<<(LEDC_DIV_NUM_HSTIMER2_S))
#define LEDC_DIV_NUM_HSTIMER2_V 0x3FFFF
#define LEDC_DIV_NUM_HSTIMER2_S 5
/* LEDC_HSTIMER2_LIM : R/W ;bitpos:[4:0] ;default: 5'h0 ; */
/*description: This register controls the range of the counter in high speed
timer2. the counter range is [0 2**reg_hstimer2_lim] the max bit width for counter is 20.*/
#define LEDC_HSTIMER2_LIM 0x0000001F
#define LEDC_HSTIMER2_LIM_M ((LEDC_HSTIMER2_LIM_V)<<(LEDC_HSTIMER2_LIM_S))
#define LEDC_HSTIMER2_LIM_V 0x1F
#define LEDC_HSTIMER2_LIM_S 0
#define LEDC_HSTIMER2_VALUE_REG (DR_REG_LEDC_BASE + 0x0154)
/* LEDC_HSTIMER2_CNT : RO ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: software can read this register to get the current counter value
in high speed timer2*/
#define LEDC_HSTIMER2_CNT 0x000FFFFF
#define LEDC_HSTIMER2_CNT_M ((LEDC_HSTIMER2_CNT_V)<<(LEDC_HSTIMER2_CNT_S))
#define LEDC_HSTIMER2_CNT_V 0xFFFFF
#define LEDC_HSTIMER2_CNT_S 0
#define LEDC_HSTIMER3_CONF_REG (DR_REG_LEDC_BASE + 0x0158)
/* LEDC_TICK_SEL_HSTIMER3 : R/W ;bitpos:[25] ;default: 1'b0 ; */
/*description: This bit is used to choose apb_clk or ref_tick for high speed
timer3. 1'b1:apb_clk 0:ref_tick*/
#define LEDC_TICK_SEL_HSTIMER3 (BIT(25))
#define LEDC_TICK_SEL_HSTIMER3_M (BIT(25))
#define LEDC_TICK_SEL_HSTIMER3_V 0x1
#define LEDC_TICK_SEL_HSTIMER3_S 25
/* LEDC_HSTIMER3_RST : R/W ;bitpos:[24] ;default: 1'b1 ; */
/*description: This bit is used to reset high speed timer3 the counter will be 0 after reset.*/
#define LEDC_HSTIMER3_RST (BIT(24))
#define LEDC_HSTIMER3_RST_M (BIT(24))
#define LEDC_HSTIMER3_RST_V 0x1
#define LEDC_HSTIMER3_RST_S 24
/* LEDC_HSTIMER3_PAUSE : R/W ;bitpos:[23] ;default: 1'b0 ; */
/*description: This bit is used to pause the counter in high speed timer3*/
#define LEDC_HSTIMER3_PAUSE (BIT(23))
#define LEDC_HSTIMER3_PAUSE_M (BIT(23))
#define LEDC_HSTIMER3_PAUSE_V 0x1
#define LEDC_HSTIMER3_PAUSE_S 23
/* LEDC_DIV_NUM_HSTIMER3 : R/W ;bitpos:[22:5] ;default: 18'h0 ; */
/*description: This register is used to configure parameter for divider in high
speed timer3 the least significant eight bits represent the decimal part.*/
#define LEDC_DIV_NUM_HSTIMER3 0x0003FFFF
#define LEDC_DIV_NUM_HSTIMER3_M ((LEDC_DIV_NUM_HSTIMER3_V)<<(LEDC_DIV_NUM_HSTIMER3_S))
#define LEDC_DIV_NUM_HSTIMER3_V 0x3FFFF
#define LEDC_DIV_NUM_HSTIMER3_S 5
/* LEDC_HSTIMER3_LIM : R/W ;bitpos:[4:0] ;default: 5'h0 ; */
/*description: This register controls the range of the counter in high speed
timer3. the counter range is [0 2**reg_hstimer3_lim] the max bit width for counter is 20.*/
#define LEDC_HSTIMER3_LIM 0x0000001F
#define LEDC_HSTIMER3_LIM_M ((LEDC_HSTIMER3_LIM_V)<<(LEDC_HSTIMER3_LIM_S))
#define LEDC_HSTIMER3_LIM_V 0x1F
#define LEDC_HSTIMER3_LIM_S 0
#define LEDC_HSTIMER3_VALUE_REG (DR_REG_LEDC_BASE + 0x015C)
/* LEDC_HSTIMER3_CNT : RO ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: software can read this register to get the current counter value
in high speed timer3*/
#define LEDC_HSTIMER3_CNT 0x000FFFFF
#define LEDC_HSTIMER3_CNT_M ((LEDC_HSTIMER3_CNT_V)<<(LEDC_HSTIMER3_CNT_S))
#define LEDC_HSTIMER3_CNT_V 0xFFFFF
#define LEDC_HSTIMER3_CNT_S 0
#define LEDC_LSTIMER0_CONF_REG (DR_REG_LEDC_BASE + 0x0160)
/* LEDC_LSTIMER0_PARA_UP : R/W ;bitpos:[26] ;default: 1'h0 ; */
/*description: Set this bit to update reg_div_num_lstime0 and reg_lstimer0_lim.*/
#define LEDC_LSTIMER0_PARA_UP (BIT(26))
#define LEDC_LSTIMER0_PARA_UP_M (BIT(26))
#define LEDC_LSTIMER0_PARA_UP_V 0x1
#define LEDC_LSTIMER0_PARA_UP_S 26
/* LEDC_TICK_SEL_LSTIMER0 : R/W ;bitpos:[25] ;default: 1'b0 ; */
/*description: This bit is used to choose slow_clk or ref_tick for low speed
timer0. 1'b1:slow_clk 0:ref_tick*/
#define LEDC_TICK_SEL_LSTIMER0 (BIT(25))
#define LEDC_TICK_SEL_LSTIMER0_M (BIT(25))
#define LEDC_TICK_SEL_LSTIMER0_V 0x1
#define LEDC_TICK_SEL_LSTIMER0_S 25
/* LEDC_LSTIMER0_RST : R/W ;bitpos:[24] ;default: 1'b1 ; */
/*description: This bit is used to reset low speed timer0 the counter will be 0 after reset.*/
#define LEDC_LSTIMER0_RST (BIT(24))
#define LEDC_LSTIMER0_RST_M (BIT(24))
#define LEDC_LSTIMER0_RST_V 0x1
#define LEDC_LSTIMER0_RST_S 24
/* LEDC_LSTIMER0_PAUSE : R/W ;bitpos:[23] ;default: 1'b0 ; */
/*description: This bit is used to pause the counter in low speed timer0.*/
#define LEDC_LSTIMER0_PAUSE (BIT(23))
#define LEDC_LSTIMER0_PAUSE_M (BIT(23))
#define LEDC_LSTIMER0_PAUSE_V 0x1
#define LEDC_LSTIMER0_PAUSE_S 23
/* LEDC_DIV_NUM_LSTIMER0 : R/W ;bitpos:[22:5] ;default: 18'h0 ; */
/*description: This register is used to configure parameter for divider in low
speed timer0 the least significant eight bits represent the decimal part.*/
#define LEDC_DIV_NUM_LSTIMER0 0x0003FFFF
#define LEDC_DIV_NUM_LSTIMER0_M ((LEDC_DIV_NUM_LSTIMER0_V)<<(LEDC_DIV_NUM_LSTIMER0_S))
#define LEDC_DIV_NUM_LSTIMER0_V 0x3FFFF
#define LEDC_DIV_NUM_LSTIMER0_S 5
/* LEDC_LSTIMER0_LIM : R/W ;bitpos:[4:0] ;default: 5'h0 ; */
/*description: This register controls the range of the counter in low speed
timer0. the counter range is [0 2**reg_lstimer0_lim] the max bit width for counter is 20.*/
#define LEDC_LSTIMER0_LIM 0x0000001F
#define LEDC_LSTIMER0_LIM_M ((LEDC_LSTIMER0_LIM_V)<<(LEDC_LSTIMER0_LIM_S))
#define LEDC_LSTIMER0_LIM_V 0x1F
#define LEDC_LSTIMER0_LIM_S 0
#define LEDC_LSTIMER0_VALUE_REG (DR_REG_LEDC_BASE + 0x0164)
/* LEDC_LSTIMER0_CNT : RO ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: software can read this register to get the current counter value
in low speed timer0.*/
#define LEDC_LSTIMER0_CNT 0x000FFFFF
#define LEDC_LSTIMER0_CNT_M ((LEDC_LSTIMER0_CNT_V)<<(LEDC_LSTIMER0_CNT_S))
#define LEDC_LSTIMER0_CNT_V 0xFFFFF
#define LEDC_LSTIMER0_CNT_S 0
#define LEDC_LSTIMER1_CONF_REG (DR_REG_LEDC_BASE + 0x0168)
/* LEDC_LSTIMER1_PARA_UP : R/W ;bitpos:[26] ;default: 1'h0 ; */
/*description: Set this bit to update reg_div_num_lstime1 and reg_lstimer1_lim.*/
#define LEDC_LSTIMER1_PARA_UP (BIT(26))
#define LEDC_LSTIMER1_PARA_UP_M (BIT(26))
#define LEDC_LSTIMER1_PARA_UP_V 0x1
#define LEDC_LSTIMER1_PARA_UP_S 26
/* LEDC_TICK_SEL_LSTIMER1 : R/W ;bitpos:[25] ;default: 1'b0 ; */
/*description: This bit is used to choose slow_clk or ref_tick for low speed
timer1. 1'b1:slow_clk 0:ref_tick*/
#define LEDC_TICK_SEL_LSTIMER1 (BIT(25))
#define LEDC_TICK_SEL_LSTIMER1_M (BIT(25))
#define LEDC_TICK_SEL_LSTIMER1_V 0x1
#define LEDC_TICK_SEL_LSTIMER1_S 25
/* LEDC_LSTIMER1_RST : R/W ;bitpos:[24] ;default: 1'b1 ; */
/*description: This bit is used to reset low speed timer1 the counter will be 0 after reset.*/
#define LEDC_LSTIMER1_RST (BIT(24))
#define LEDC_LSTIMER1_RST_M (BIT(24))
#define LEDC_LSTIMER1_RST_V 0x1
#define LEDC_LSTIMER1_RST_S 24
/* LEDC_LSTIMER1_PAUSE : R/W ;bitpos:[23] ;default: 1'b0 ; */
/*description: This bit is used to pause the counter in low speed timer1.*/
#define LEDC_LSTIMER1_PAUSE (BIT(23))
#define LEDC_LSTIMER1_PAUSE_M (BIT(23))
#define LEDC_LSTIMER1_PAUSE_V 0x1
#define LEDC_LSTIMER1_PAUSE_S 23
/* LEDC_DIV_NUM_LSTIMER1 : R/W ;bitpos:[22:5] ;default: 18'h0 ; */
/*description: This register is used to configure parameter for divider in low
speed timer1 the least significant eight bits represent the decimal part.*/
#define LEDC_DIV_NUM_LSTIMER1 0x0003FFFF
#define LEDC_DIV_NUM_LSTIMER1_M ((LEDC_DIV_NUM_LSTIMER1_V)<<(LEDC_DIV_NUM_LSTIMER1_S))
#define LEDC_DIV_NUM_LSTIMER1_V 0x3FFFF
#define LEDC_DIV_NUM_LSTIMER1_S 5
/* LEDC_LSTIMER1_LIM : R/W ;bitpos:[4:0] ;default: 5'h0 ; */
/*description: This register controls the range of the counter in low speed
timer1. the counter range is [0 2**reg_lstimer1_lim] the max bit width for counter is 20.*/
#define LEDC_LSTIMER1_LIM 0x0000001F
#define LEDC_LSTIMER1_LIM_M ((LEDC_LSTIMER1_LIM_V)<<(LEDC_LSTIMER1_LIM_S))
#define LEDC_LSTIMER1_LIM_V 0x1F
#define LEDC_LSTIMER1_LIM_S 0
#define LEDC_LSTIMER1_VALUE_REG (DR_REG_LEDC_BASE + 0x016C)
/* LEDC_LSTIMER1_CNT : RO ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: software can read this register to get the current counter value
in low speed timer1.*/
#define LEDC_LSTIMER1_CNT 0x000FFFFF
#define LEDC_LSTIMER1_CNT_M ((LEDC_LSTIMER1_CNT_V)<<(LEDC_LSTIMER1_CNT_S))
#define LEDC_LSTIMER1_CNT_V 0xFFFFF
#define LEDC_LSTIMER1_CNT_S 0
#define LEDC_LSTIMER2_CONF_REG (DR_REG_LEDC_BASE + 0x0170)
/* LEDC_LSTIMER2_PARA_UP : R/W ;bitpos:[26] ;default: 1'h0 ; */
/*description: Set this bit to update reg_div_num_lstime2 and reg_lstimer2_lim.*/
#define LEDC_LSTIMER2_PARA_UP (BIT(26))
#define LEDC_LSTIMER2_PARA_UP_M (BIT(26))
#define LEDC_LSTIMER2_PARA_UP_V 0x1
#define LEDC_LSTIMER2_PARA_UP_S 26
/* LEDC_TICK_SEL_LSTIMER2 : R/W ;bitpos:[25] ;default: 1'b0 ; */
/*description: This bit is used to choose slow_clk or ref_tick for low speed
timer2. 1'b1:slow_clk 0:ref_tick*/
#define LEDC_TICK_SEL_LSTIMER2 (BIT(25))
#define LEDC_TICK_SEL_LSTIMER2_M (BIT(25))
#define LEDC_TICK_SEL_LSTIMER2_V 0x1
#define LEDC_TICK_SEL_LSTIMER2_S 25
/* LEDC_LSTIMER2_RST : R/W ;bitpos:[24] ;default: 1'b1 ; */
/*description: This bit is used to reset low speed timer2 the counter will be 0 after reset.*/
#define LEDC_LSTIMER2_RST (BIT(24))
#define LEDC_LSTIMER2_RST_M (BIT(24))
#define LEDC_LSTIMER2_RST_V 0x1
#define LEDC_LSTIMER2_RST_S 24
/* LEDC_LSTIMER2_PAUSE : R/W ;bitpos:[23] ;default: 1'b0 ; */
/*description: This bit is used to pause the counter in low speed timer2.*/
#define LEDC_LSTIMER2_PAUSE (BIT(23))
#define LEDC_LSTIMER2_PAUSE_M (BIT(23))
#define LEDC_LSTIMER2_PAUSE_V 0x1
#define LEDC_LSTIMER2_PAUSE_S 23
/* LEDC_DIV_NUM_LSTIMER2 : R/W ;bitpos:[22:5] ;default: 18'h0 ; */
/*description: This register is used to configure parameter for divider in low
speed timer2 the least significant eight bits represent the decimal part.*/
#define LEDC_DIV_NUM_LSTIMER2 0x0003FFFF
#define LEDC_DIV_NUM_LSTIMER2_M ((LEDC_DIV_NUM_LSTIMER2_V)<<(LEDC_DIV_NUM_LSTIMER2_S))
#define LEDC_DIV_NUM_LSTIMER2_V 0x3FFFF
#define LEDC_DIV_NUM_LSTIMER2_S 5
/* LEDC_LSTIMER2_LIM : R/W ;bitpos:[4:0] ;default: 5'h0 ; */
/*description: This register controls the range of the counter in low speed
timer2. the counter range is [0 2**reg_lstimer2_lim] the max bit width for counter is 20.*/
#define LEDC_LSTIMER2_LIM 0x0000001F
#define LEDC_LSTIMER2_LIM_M ((LEDC_LSTIMER2_LIM_V)<<(LEDC_LSTIMER2_LIM_S))
#define LEDC_LSTIMER2_LIM_V 0x1F
#define LEDC_LSTIMER2_LIM_S 0
#define LEDC_LSTIMER2_VALUE_REG (DR_REG_LEDC_BASE + 0x0174)
/* LEDC_LSTIMER2_CNT : RO ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: software can read this register to get the current counter value
in low speed timer2.*/
#define LEDC_LSTIMER2_CNT 0x000FFFFF
#define LEDC_LSTIMER2_CNT_M ((LEDC_LSTIMER2_CNT_V)<<(LEDC_LSTIMER2_CNT_S))
#define LEDC_LSTIMER2_CNT_V 0xFFFFF
#define LEDC_LSTIMER2_CNT_S 0
#define LEDC_LSTIMER3_CONF_REG (DR_REG_LEDC_BASE + 0x0178)
/* LEDC_LSTIMER3_PARA_UP : R/W ;bitpos:[26] ;default: 1'h0 ; */
/*description: Set this bit to update reg_div_num_lstime3 and reg_lstimer3_lim.*/
#define LEDC_LSTIMER3_PARA_UP (BIT(26))
#define LEDC_LSTIMER3_PARA_UP_M (BIT(26))
#define LEDC_LSTIMER3_PARA_UP_V 0x1
#define LEDC_LSTIMER3_PARA_UP_S 26
/* LEDC_TICK_SEL_LSTIMER3 : R/W ;bitpos:[25] ;default: 1'b0 ; */
/*description: This bit is used to choose slow_clk or ref_tick for low speed
timer3. 1'b1:slow_clk 0:ref_tick*/
#define LEDC_TICK_SEL_LSTIMER3 (BIT(25))
#define LEDC_TICK_SEL_LSTIMER3_M (BIT(25))
#define LEDC_TICK_SEL_LSTIMER3_V 0x1
#define LEDC_TICK_SEL_LSTIMER3_S 25
/* LEDC_LSTIMER3_RST : R/W ;bitpos:[24] ;default: 1'b1 ; */
/*description: This bit is used to reset low speed timer3 the counter will be 0 after reset.*/
#define LEDC_LSTIMER3_RST (BIT(24))
#define LEDC_LSTIMER3_RST_M (BIT(24))
#define LEDC_LSTIMER3_RST_V 0x1
#define LEDC_LSTIMER3_RST_S 24
/* LEDC_LSTIMER3_PAUSE : R/W ;bitpos:[23] ;default: 1'b0 ; */
/*description: This bit is used to pause the counter in low speed timer3.*/
#define LEDC_LSTIMER3_PAUSE (BIT(23))
#define LEDC_LSTIMER3_PAUSE_M (BIT(23))
#define LEDC_LSTIMER3_PAUSE_V 0x1
#define LEDC_LSTIMER3_PAUSE_S 23
/* LEDC_DIV_NUM_LSTIMER3 : R/W ;bitpos:[22:5] ;default: 18'h0 ; */
/*description: This register is used to configure parameter for divider in low
speed timer3 the least significant eight bits represent the decimal part.*/
#define LEDC_DIV_NUM_LSTIMER3 0x0003FFFF
#define LEDC_DIV_NUM_LSTIMER3_M ((LEDC_DIV_NUM_LSTIMER3_V)<<(LEDC_DIV_NUM_LSTIMER3_S))
#define LEDC_DIV_NUM_LSTIMER3_V 0x3FFFF
#define LEDC_DIV_NUM_LSTIMER3_S 5
/* LEDC_LSTIMER3_LIM : R/W ;bitpos:[4:0] ;default: 5'h0 ; */
/*description: This register controls the range of the counter in low speed
timer3. the counter range is [0 2**reg_lstimer3_lim] the max bit width for counter is 20.*/
#define LEDC_LSTIMER3_LIM 0x0000001F
#define LEDC_LSTIMER3_LIM_M ((LEDC_LSTIMER3_LIM_V)<<(LEDC_LSTIMER3_LIM_S))
#define LEDC_LSTIMER3_LIM_V 0x1F
#define LEDC_LSTIMER3_LIM_S 0
#define LEDC_LSTIMER3_VALUE_REG (DR_REG_LEDC_BASE + 0x017C)
/* LEDC_LSTIMER3_CNT : RO ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: software can read this register to get the current counter value
in low speed timer3.*/
#define LEDC_LSTIMER3_CNT 0x000FFFFF
#define LEDC_LSTIMER3_CNT_M ((LEDC_LSTIMER3_CNT_V)<<(LEDC_LSTIMER3_CNT_S))
#define LEDC_LSTIMER3_CNT_V 0xFFFFF
#define LEDC_LSTIMER3_CNT_S 0
#define LEDC_INT_RAW_REG (DR_REG_LEDC_BASE + 0x0180)
/* LEDC_DUTY_CHNG_END_LSCH7_INT_RAW : RO ;bitpos:[23] ;default: 1'b0 ; */
/*description: The interrupt raw bit for low speed channel 7 duty change done.*/
#define LEDC_DUTY_CHNG_END_LSCH7_INT_RAW (BIT(23))
#define LEDC_DUTY_CHNG_END_LSCH7_INT_RAW_M (BIT(23))
#define LEDC_DUTY_CHNG_END_LSCH7_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH7_INT_RAW_S 23
/* LEDC_DUTY_CHNG_END_LSCH6_INT_RAW : RO ;bitpos:[22] ;default: 1'b0 ; */
/*description: The interrupt raw bit for low speed channel 6 duty change done.*/
#define LEDC_DUTY_CHNG_END_LSCH6_INT_RAW (BIT(22))
#define LEDC_DUTY_CHNG_END_LSCH6_INT_RAW_M (BIT(22))
#define LEDC_DUTY_CHNG_END_LSCH6_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH6_INT_RAW_S 22
/* LEDC_DUTY_CHNG_END_LSCH5_INT_RAW : RO ;bitpos:[21] ;default: 1'b0 ; */
/*description: The interrupt raw bit for low speed channel 5 duty change done.*/
#define LEDC_DUTY_CHNG_END_LSCH5_INT_RAW (BIT(21))
#define LEDC_DUTY_CHNG_END_LSCH5_INT_RAW_M (BIT(21))
#define LEDC_DUTY_CHNG_END_LSCH5_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH5_INT_RAW_S 21
/* LEDC_DUTY_CHNG_END_LSCH4_INT_RAW : RO ;bitpos:[20] ;default: 1'b0 ; */
/*description: The interrupt raw bit for low speed channel 4 duty change done.*/
#define LEDC_DUTY_CHNG_END_LSCH4_INT_RAW (BIT(20))
#define LEDC_DUTY_CHNG_END_LSCH4_INT_RAW_M (BIT(20))
#define LEDC_DUTY_CHNG_END_LSCH4_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH4_INT_RAW_S 20
/* LEDC_DUTY_CHNG_END_LSCH3_INT_RAW : RO ;bitpos:[19] ;default: 1'b0 ; */
/*description: The interrupt raw bit for low speed channel 3 duty change done.*/
#define LEDC_DUTY_CHNG_END_LSCH3_INT_RAW (BIT(19))
#define LEDC_DUTY_CHNG_END_LSCH3_INT_RAW_M (BIT(19))
#define LEDC_DUTY_CHNG_END_LSCH3_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH3_INT_RAW_S 19
/* LEDC_DUTY_CHNG_END_LSCH2_INT_RAW : RO ;bitpos:[18] ;default: 1'b0 ; */
/*description: The interrupt raw bit for low speed channel 2 duty change done.*/
#define LEDC_DUTY_CHNG_END_LSCH2_INT_RAW (BIT(18))
#define LEDC_DUTY_CHNG_END_LSCH2_INT_RAW_M (BIT(18))
#define LEDC_DUTY_CHNG_END_LSCH2_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH2_INT_RAW_S 18
/* LEDC_DUTY_CHNG_END_LSCH1_INT_RAW : RO ;bitpos:[17] ;default: 1'b0 ; */
/*description: The interrupt raw bit for low speed channel 1 duty change done.*/
#define LEDC_DUTY_CHNG_END_LSCH1_INT_RAW (BIT(17))
#define LEDC_DUTY_CHNG_END_LSCH1_INT_RAW_M (BIT(17))
#define LEDC_DUTY_CHNG_END_LSCH1_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH1_INT_RAW_S 17
/* LEDC_DUTY_CHNG_END_LSCH0_INT_RAW : RO ;bitpos:[16] ;default: 1'b0 ; */
/*description: The interrupt raw bit for low speed channel 0 duty change done.*/
#define LEDC_DUTY_CHNG_END_LSCH0_INT_RAW (BIT(16))
#define LEDC_DUTY_CHNG_END_LSCH0_INT_RAW_M (BIT(16))
#define LEDC_DUTY_CHNG_END_LSCH0_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH0_INT_RAW_S 16
/* LEDC_DUTY_CHNG_END_HSCH7_INT_RAW : RO ;bitpos:[15] ;default: 1'b0 ; */
/*description: The interrupt raw bit for high speed channel 7 duty change done.*/
#define LEDC_DUTY_CHNG_END_HSCH7_INT_RAW (BIT(15))
#define LEDC_DUTY_CHNG_END_HSCH7_INT_RAW_M (BIT(15))
#define LEDC_DUTY_CHNG_END_HSCH7_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH7_INT_RAW_S 15
/* LEDC_DUTY_CHNG_END_HSCH6_INT_RAW : RO ;bitpos:[14] ;default: 1'b0 ; */
/*description: The interrupt raw bit for high speed channel 6 duty change done.*/
#define LEDC_DUTY_CHNG_END_HSCH6_INT_RAW (BIT(14))
#define LEDC_DUTY_CHNG_END_HSCH6_INT_RAW_M (BIT(14))
#define LEDC_DUTY_CHNG_END_HSCH6_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH6_INT_RAW_S 14
/* LEDC_DUTY_CHNG_END_HSCH5_INT_RAW : RO ;bitpos:[13] ;default: 1'b0 ; */
/*description: The interrupt raw bit for high speed channel 5 duty change done.*/
#define LEDC_DUTY_CHNG_END_HSCH5_INT_RAW (BIT(13))
#define LEDC_DUTY_CHNG_END_HSCH5_INT_RAW_M (BIT(13))
#define LEDC_DUTY_CHNG_END_HSCH5_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH5_INT_RAW_S 13
/* LEDC_DUTY_CHNG_END_HSCH4_INT_RAW : RO ;bitpos:[12] ;default: 1'b0 ; */
/*description: The interrupt raw bit for high speed channel 4 duty change done.*/
#define LEDC_DUTY_CHNG_END_HSCH4_INT_RAW (BIT(12))
#define LEDC_DUTY_CHNG_END_HSCH4_INT_RAW_M (BIT(12))
#define LEDC_DUTY_CHNG_END_HSCH4_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH4_INT_RAW_S 12
/* LEDC_DUTY_CHNG_END_HSCH3_INT_RAW : RO ;bitpos:[11] ;default: 1'b0 ; */
/*description: The interrupt raw bit for high speed channel 3 duty change done.*/
#define LEDC_DUTY_CHNG_END_HSCH3_INT_RAW (BIT(11))
#define LEDC_DUTY_CHNG_END_HSCH3_INT_RAW_M (BIT(11))
#define LEDC_DUTY_CHNG_END_HSCH3_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH3_INT_RAW_S 11
/* LEDC_DUTY_CHNG_END_HSCH2_INT_RAW : RO ;bitpos:[10] ;default: 1'b0 ; */
/*description: The interrupt raw bit for high speed channel 2 duty change done.*/
#define LEDC_DUTY_CHNG_END_HSCH2_INT_RAW (BIT(10))
#define LEDC_DUTY_CHNG_END_HSCH2_INT_RAW_M (BIT(10))
#define LEDC_DUTY_CHNG_END_HSCH2_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH2_INT_RAW_S 10
/* LEDC_DUTY_CHNG_END_HSCH1_INT_RAW : RO ;bitpos:[9] ;default: 1'b0 ; */
/*description: The interrupt raw bit for high speed channel 1 duty change done.*/
#define LEDC_DUTY_CHNG_END_HSCH1_INT_RAW (BIT(9))
#define LEDC_DUTY_CHNG_END_HSCH1_INT_RAW_M (BIT(9))
#define LEDC_DUTY_CHNG_END_HSCH1_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH1_INT_RAW_S 9
/* LEDC_DUTY_CHNG_END_HSCH0_INT_RAW : RO ;bitpos:[8] ;default: 1'b0 ; */
/*description: The interrupt raw bit for high speed channel 0 duty change done.*/
#define LEDC_DUTY_CHNG_END_HSCH0_INT_RAW (BIT(8))
#define LEDC_DUTY_CHNG_END_HSCH0_INT_RAW_M (BIT(8))
#define LEDC_DUTY_CHNG_END_HSCH0_INT_RAW_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH0_INT_RAW_S 8
/* LEDC_LSTIMER3_OVF_INT_RAW : RO ;bitpos:[7] ;default: 1'b0 ; */
/*description: The interrupt raw bit for low speed channel3 counter overflow.*/
#define LEDC_LSTIMER3_OVF_INT_RAW (BIT(7))
#define LEDC_LSTIMER3_OVF_INT_RAW_M (BIT(7))
#define LEDC_LSTIMER3_OVF_INT_RAW_V 0x1
#define LEDC_LSTIMER3_OVF_INT_RAW_S 7
/* LEDC_LSTIMER2_OVF_INT_RAW : RO ;bitpos:[6] ;default: 1'b0 ; */
/*description: The interrupt raw bit for low speed channel2 counter overflow.*/
#define LEDC_LSTIMER2_OVF_INT_RAW (BIT(6))
#define LEDC_LSTIMER2_OVF_INT_RAW_M (BIT(6))
#define LEDC_LSTIMER2_OVF_INT_RAW_V 0x1
#define LEDC_LSTIMER2_OVF_INT_RAW_S 6
/* LEDC_LSTIMER1_OVF_INT_RAW : RO ;bitpos:[5] ;default: 1'b0 ; */
/*description: The interrupt raw bit for low speed channel1 counter overflow.*/
#define LEDC_LSTIMER1_OVF_INT_RAW (BIT(5))
#define LEDC_LSTIMER1_OVF_INT_RAW_M (BIT(5))
#define LEDC_LSTIMER1_OVF_INT_RAW_V 0x1
#define LEDC_LSTIMER1_OVF_INT_RAW_S 5
/* LEDC_LSTIMER0_OVF_INT_RAW : RO ;bitpos:[4] ;default: 1'b0 ; */
/*description: The interrupt raw bit for low speed channel0 counter overflow.*/
#define LEDC_LSTIMER0_OVF_INT_RAW (BIT(4))
#define LEDC_LSTIMER0_OVF_INT_RAW_M (BIT(4))
#define LEDC_LSTIMER0_OVF_INT_RAW_V 0x1
#define LEDC_LSTIMER0_OVF_INT_RAW_S 4
/* LEDC_HSTIMER3_OVF_INT_RAW : RO ;bitpos:[3] ;default: 1'b0 ; */
/*description: The interrupt raw bit for high speed channel3 counter overflow.*/
#define LEDC_HSTIMER3_OVF_INT_RAW (BIT(3))
#define LEDC_HSTIMER3_OVF_INT_RAW_M (BIT(3))
#define LEDC_HSTIMER3_OVF_INT_RAW_V 0x1
#define LEDC_HSTIMER3_OVF_INT_RAW_S 3
/* LEDC_HSTIMER2_OVF_INT_RAW : RO ;bitpos:[2] ;default: 1'b0 ; */
/*description: The interrupt raw bit for high speed channel2 counter overflow.*/
#define LEDC_HSTIMER2_OVF_INT_RAW (BIT(2))
#define LEDC_HSTIMER2_OVF_INT_RAW_M (BIT(2))
#define LEDC_HSTIMER2_OVF_INT_RAW_V 0x1
#define LEDC_HSTIMER2_OVF_INT_RAW_S 2
/* LEDC_HSTIMER1_OVF_INT_RAW : RO ;bitpos:[1] ;default: 1'b0 ; */
/*description: The interrupt raw bit for high speed channel1 counter overflow.*/
#define LEDC_HSTIMER1_OVF_INT_RAW (BIT(1))
#define LEDC_HSTIMER1_OVF_INT_RAW_M (BIT(1))
#define LEDC_HSTIMER1_OVF_INT_RAW_V 0x1
#define LEDC_HSTIMER1_OVF_INT_RAW_S 1
/* LEDC_HSTIMER0_OVF_INT_RAW : RO ;bitpos:[0] ;default: 1'b0 ; */
/*description: The interrupt raw bit for high speed channel0 counter overflow.*/
#define LEDC_HSTIMER0_OVF_INT_RAW (BIT(0))
#define LEDC_HSTIMER0_OVF_INT_RAW_M (BIT(0))
#define LEDC_HSTIMER0_OVF_INT_RAW_V 0x1
#define LEDC_HSTIMER0_OVF_INT_RAW_S 0
#define LEDC_INT_ST_REG (DR_REG_LEDC_BASE + 0x0184)
/* LEDC_DUTY_CHNG_END_LSCH7_INT_ST : RO ;bitpos:[23] ;default: 1'h0 ; */
/*description: The interrupt status bit for low speed channel 7 duty change done event*/
#define LEDC_DUTY_CHNG_END_LSCH7_INT_ST (BIT(23))
#define LEDC_DUTY_CHNG_END_LSCH7_INT_ST_M (BIT(23))
#define LEDC_DUTY_CHNG_END_LSCH7_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH7_INT_ST_S 23
/* LEDC_DUTY_CHNG_END_LSCH6_INT_ST : RO ;bitpos:[22] ;default: 1'b0 ; */
/*description: The interrupt status bit for low speed channel 6 duty change done event.*/
#define LEDC_DUTY_CHNG_END_LSCH6_INT_ST (BIT(22))
#define LEDC_DUTY_CHNG_END_LSCH6_INT_ST_M (BIT(22))
#define LEDC_DUTY_CHNG_END_LSCH6_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH6_INT_ST_S 22
/* LEDC_DUTY_CHNG_END_LSCH5_INT_ST : RO ;bitpos:[21] ;default: 1'b0 ; */
/*description: The interrupt status bit for low speed channel 5 duty change done event.*/
#define LEDC_DUTY_CHNG_END_LSCH5_INT_ST (BIT(21))
#define LEDC_DUTY_CHNG_END_LSCH5_INT_ST_M (BIT(21))
#define LEDC_DUTY_CHNG_END_LSCH5_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH5_INT_ST_S 21
/* LEDC_DUTY_CHNG_END_LSCH4_INT_ST : RO ;bitpos:[20] ;default: 1'b0 ; */
/*description: The interrupt status bit for low speed channel 4 duty change done event.*/
#define LEDC_DUTY_CHNG_END_LSCH4_INT_ST (BIT(20))
#define LEDC_DUTY_CHNG_END_LSCH4_INT_ST_M (BIT(20))
#define LEDC_DUTY_CHNG_END_LSCH4_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH4_INT_ST_S 20
/* LEDC_DUTY_CHNG_END_LSCH3_INT_ST : RO ;bitpos:[19] ;default: 1'b0 ; */
/*description: The interrupt status bit for low speed channel 3 duty change done event.*/
#define LEDC_DUTY_CHNG_END_LSCH3_INT_ST (BIT(19))
#define LEDC_DUTY_CHNG_END_LSCH3_INT_ST_M (BIT(19))
#define LEDC_DUTY_CHNG_END_LSCH3_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH3_INT_ST_S 19
/* LEDC_DUTY_CHNG_END_LSCH2_INT_ST : RO ;bitpos:[18] ;default: 1'b0 ; */
/*description: The interrupt status bit for low speed channel 2 duty change done event.*/
#define LEDC_DUTY_CHNG_END_LSCH2_INT_ST (BIT(18))
#define LEDC_DUTY_CHNG_END_LSCH2_INT_ST_M (BIT(18))
#define LEDC_DUTY_CHNG_END_LSCH2_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH2_INT_ST_S 18
/* LEDC_DUTY_CHNG_END_LSCH1_INT_ST : RO ;bitpos:[17] ;default: 1'b0 ; */
/*description: The interrupt status bit for low speed channel 1 duty change done event.*/
#define LEDC_DUTY_CHNG_END_LSCH1_INT_ST (BIT(17))
#define LEDC_DUTY_CHNG_END_LSCH1_INT_ST_M (BIT(17))
#define LEDC_DUTY_CHNG_END_LSCH1_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH1_INT_ST_S 17
/* LEDC_DUTY_CHNG_END_LSCH0_INT_ST : RO ;bitpos:[16] ;default: 1'b0 ; */
/*description: The interrupt status bit for low speed channel 0 duty change done event.*/
#define LEDC_DUTY_CHNG_END_LSCH0_INT_ST (BIT(16))
#define LEDC_DUTY_CHNG_END_LSCH0_INT_ST_M (BIT(16))
#define LEDC_DUTY_CHNG_END_LSCH0_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH0_INT_ST_S 16
/* LEDC_DUTY_CHNG_END_HSCH7_INT_ST : RO ;bitpos:[15] ;default: 1'b0 ; */
/*description: The interrupt status bit for high speed channel 7 duty change done event.*/
#define LEDC_DUTY_CHNG_END_HSCH7_INT_ST (BIT(15))
#define LEDC_DUTY_CHNG_END_HSCH7_INT_ST_M (BIT(15))
#define LEDC_DUTY_CHNG_END_HSCH7_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH7_INT_ST_S 15
/* LEDC_DUTY_CHNG_END_HSCH6_INT_ST : RO ;bitpos:[14] ;default: 1'b0 ; */
/*description: The interrupt status bit for high speed channel 6 duty change done event.*/
#define LEDC_DUTY_CHNG_END_HSCH6_INT_ST (BIT(14))
#define LEDC_DUTY_CHNG_END_HSCH6_INT_ST_M (BIT(14))
#define LEDC_DUTY_CHNG_END_HSCH6_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH6_INT_ST_S 14
/* LEDC_DUTY_CHNG_END_HSCH5_INT_ST : RO ;bitpos:[13] ;default: 1'b0 ; */
/*description: The interrupt status bit for high speed channel 5 duty change done event.*/
#define LEDC_DUTY_CHNG_END_HSCH5_INT_ST (BIT(13))
#define LEDC_DUTY_CHNG_END_HSCH5_INT_ST_M (BIT(13))
#define LEDC_DUTY_CHNG_END_HSCH5_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH5_INT_ST_S 13
/* LEDC_DUTY_CHNG_END_HSCH4_INT_ST : RO ;bitpos:[12] ;default: 1'b0 ; */
/*description: The interrupt status bit for high speed channel 4 duty change done event.*/
#define LEDC_DUTY_CHNG_END_HSCH4_INT_ST (BIT(12))
#define LEDC_DUTY_CHNG_END_HSCH4_INT_ST_M (BIT(12))
#define LEDC_DUTY_CHNG_END_HSCH4_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH4_INT_ST_S 12
/* LEDC_DUTY_CHNG_END_HSCH3_INT_ST : RO ;bitpos:[11] ;default: 1'b0 ; */
/*description: The interrupt status bit for high speed channel 3 duty change done event.*/
#define LEDC_DUTY_CHNG_END_HSCH3_INT_ST (BIT(11))
#define LEDC_DUTY_CHNG_END_HSCH3_INT_ST_M (BIT(11))
#define LEDC_DUTY_CHNG_END_HSCH3_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH3_INT_ST_S 11
/* LEDC_DUTY_CHNG_END_HSCH2_INT_ST : RO ;bitpos:[10] ;default: 1'b0 ; */
/*description: The interrupt status bit for high speed channel 2 duty change done event.*/
#define LEDC_DUTY_CHNG_END_HSCH2_INT_ST (BIT(10))
#define LEDC_DUTY_CHNG_END_HSCH2_INT_ST_M (BIT(10))
#define LEDC_DUTY_CHNG_END_HSCH2_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH2_INT_ST_S 10
/* LEDC_DUTY_CHNG_END_HSCH1_INT_ST : RO ;bitpos:[9] ;default: 1'b0 ; */
/*description: The interrupt status bit for high speed channel 1 duty change done event.*/
#define LEDC_DUTY_CHNG_END_HSCH1_INT_ST (BIT(9))
#define LEDC_DUTY_CHNG_END_HSCH1_INT_ST_M (BIT(9))
#define LEDC_DUTY_CHNG_END_HSCH1_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH1_INT_ST_S 9
/* LEDC_DUTY_CHNG_END_HSCH0_INT_ST : RO ;bitpos:[8] ;default: 1'b0 ; */
/*description: The interrupt status bit for high speed channel 0 duty change done event.*/
#define LEDC_DUTY_CHNG_END_HSCH0_INT_ST (BIT(8))
#define LEDC_DUTY_CHNG_END_HSCH0_INT_ST_M (BIT(8))
#define LEDC_DUTY_CHNG_END_HSCH0_INT_ST_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH0_INT_ST_S 8
/* LEDC_LSTIMER3_OVF_INT_ST : RO ;bitpos:[7] ;default: 1'b0 ; */
/*description: The interrupt status bit for low speed channel3 counter overflow event.*/
#define LEDC_LSTIMER3_OVF_INT_ST (BIT(7))
#define LEDC_LSTIMER3_OVF_INT_ST_M (BIT(7))
#define LEDC_LSTIMER3_OVF_INT_ST_V 0x1
#define LEDC_LSTIMER3_OVF_INT_ST_S 7
/* LEDC_LSTIMER2_OVF_INT_ST : RO ;bitpos:[6] ;default: 1'b0 ; */
/*description: The interrupt status bit for low speed channel2 counter overflow event.*/
#define LEDC_LSTIMER2_OVF_INT_ST (BIT(6))
#define LEDC_LSTIMER2_OVF_INT_ST_M (BIT(6))
#define LEDC_LSTIMER2_OVF_INT_ST_V 0x1
#define LEDC_LSTIMER2_OVF_INT_ST_S 6
/* LEDC_LSTIMER1_OVF_INT_ST : RO ;bitpos:[5] ;default: 1'b0 ; */
/*description: The interrupt status bit for low speed channel1 counter overflow event.*/
#define LEDC_LSTIMER1_OVF_INT_ST (BIT(5))
#define LEDC_LSTIMER1_OVF_INT_ST_M (BIT(5))
#define LEDC_LSTIMER1_OVF_INT_ST_V 0x1
#define LEDC_LSTIMER1_OVF_INT_ST_S 5
/* LEDC_LSTIMER0_OVF_INT_ST : RO ;bitpos:[4] ;default: 1'b0 ; */
/*description: The interrupt status bit for low speed channel0 counter overflow event.*/
#define LEDC_LSTIMER0_OVF_INT_ST (BIT(4))
#define LEDC_LSTIMER0_OVF_INT_ST_M (BIT(4))
#define LEDC_LSTIMER0_OVF_INT_ST_V 0x1
#define LEDC_LSTIMER0_OVF_INT_ST_S 4
/* LEDC_HSTIMER3_OVF_INT_ST : RO ;bitpos:[3] ;default: 1'b0 ; */
/*description: The interrupt status bit for high speed channel3 counter overflow event.*/
#define LEDC_HSTIMER3_OVF_INT_ST (BIT(3))
#define LEDC_HSTIMER3_OVF_INT_ST_M (BIT(3))
#define LEDC_HSTIMER3_OVF_INT_ST_V 0x1
#define LEDC_HSTIMER3_OVF_INT_ST_S 3
/* LEDC_HSTIMER2_OVF_INT_ST : RO ;bitpos:[2] ;default: 1'b0 ; */
/*description: The interrupt status bit for high speed channel2 counter overflow event.*/
#define LEDC_HSTIMER2_OVF_INT_ST (BIT(2))
#define LEDC_HSTIMER2_OVF_INT_ST_M (BIT(2))
#define LEDC_HSTIMER2_OVF_INT_ST_V 0x1
#define LEDC_HSTIMER2_OVF_INT_ST_S 2
/* LEDC_HSTIMER1_OVF_INT_ST : RO ;bitpos:[1] ;default: 1'b0 ; */
/*description: The interrupt status bit for high speed channel1 counter overflow event.*/
#define LEDC_HSTIMER1_OVF_INT_ST (BIT(1))
#define LEDC_HSTIMER1_OVF_INT_ST_M (BIT(1))
#define LEDC_HSTIMER1_OVF_INT_ST_V 0x1
#define LEDC_HSTIMER1_OVF_INT_ST_S 1
/* LEDC_HSTIMER0_OVF_INT_ST : RO ;bitpos:[0] ;default: 1'b0 ; */
/*description: The interrupt status bit for high speed channel0 counter overflow event.*/
#define LEDC_HSTIMER0_OVF_INT_ST (BIT(0))
#define LEDC_HSTIMER0_OVF_INT_ST_M (BIT(0))
#define LEDC_HSTIMER0_OVF_INT_ST_V 0x1
#define LEDC_HSTIMER0_OVF_INT_ST_S 0
#define LEDC_INT_ENA_REG (DR_REG_LEDC_BASE + 0x0188)
/* LEDC_DUTY_CHNG_END_LSCH7_INT_ENA : R/W ;bitpos:[23] ;default: 1'h0 ; */
/*description: The interrupt enable bit for low speed channel 7 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH7_INT_ENA (BIT(23))
#define LEDC_DUTY_CHNG_END_LSCH7_INT_ENA_M (BIT(23))
#define LEDC_DUTY_CHNG_END_LSCH7_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH7_INT_ENA_S 23
/* LEDC_DUTY_CHNG_END_LSCH6_INT_ENA : R/W ;bitpos:[22] ;default: 1'b0 ; */
/*description: The interrupt enable bit for low speed channel 6 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH6_INT_ENA (BIT(22))
#define LEDC_DUTY_CHNG_END_LSCH6_INT_ENA_M (BIT(22))
#define LEDC_DUTY_CHNG_END_LSCH6_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH6_INT_ENA_S 22
/* LEDC_DUTY_CHNG_END_LSCH5_INT_ENA : R/W ;bitpos:[21] ;default: 1'b0 ; */
/*description: The interrupt enable bit for low speed channel 5 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH5_INT_ENA (BIT(21))
#define LEDC_DUTY_CHNG_END_LSCH5_INT_ENA_M (BIT(21))
#define LEDC_DUTY_CHNG_END_LSCH5_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH5_INT_ENA_S 21
/* LEDC_DUTY_CHNG_END_LSCH4_INT_ENA : R/W ;bitpos:[20] ;default: 1'b0 ; */
/*description: The interrupt enable bit for low speed channel 4 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH4_INT_ENA (BIT(20))
#define LEDC_DUTY_CHNG_END_LSCH4_INT_ENA_M (BIT(20))
#define LEDC_DUTY_CHNG_END_LSCH4_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH4_INT_ENA_S 20
/* LEDC_DUTY_CHNG_END_LSCH3_INT_ENA : R/W ;bitpos:[19] ;default: 1'b0 ; */
/*description: The interrupt enable bit for low speed channel 3 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH3_INT_ENA (BIT(19))
#define LEDC_DUTY_CHNG_END_LSCH3_INT_ENA_M (BIT(19))
#define LEDC_DUTY_CHNG_END_LSCH3_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH3_INT_ENA_S 19
/* LEDC_DUTY_CHNG_END_LSCH2_INT_ENA : R/W ;bitpos:[18] ;default: 1'b0 ; */
/*description: The interrupt enable bit for low speed channel 2 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH2_INT_ENA (BIT(18))
#define LEDC_DUTY_CHNG_END_LSCH2_INT_ENA_M (BIT(18))
#define LEDC_DUTY_CHNG_END_LSCH2_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH2_INT_ENA_S 18
/* LEDC_DUTY_CHNG_END_LSCH1_INT_ENA : R/W ;bitpos:[17] ;default: 1'b0 ; */
/*description: The interrupt enable bit for low speed channel 1 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH1_INT_ENA (BIT(17))
#define LEDC_DUTY_CHNG_END_LSCH1_INT_ENA_M (BIT(17))
#define LEDC_DUTY_CHNG_END_LSCH1_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH1_INT_ENA_S 17
/* LEDC_DUTY_CHNG_END_LSCH0_INT_ENA : R/W ;bitpos:[16] ;default: 1'b0 ; */
/*description: The interrupt enable bit for low speed channel 0 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH0_INT_ENA (BIT(16))
#define LEDC_DUTY_CHNG_END_LSCH0_INT_ENA_M (BIT(16))
#define LEDC_DUTY_CHNG_END_LSCH0_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH0_INT_ENA_S 16
/* LEDC_DUTY_CHNG_END_HSCH7_INT_ENA : R/W ;bitpos:[15] ;default: 1'b0 ; */
/*description: The interrupt enable bit for high speed channel 7 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH7_INT_ENA (BIT(15))
#define LEDC_DUTY_CHNG_END_HSCH7_INT_ENA_M (BIT(15))
#define LEDC_DUTY_CHNG_END_HSCH7_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH7_INT_ENA_S 15
/* LEDC_DUTY_CHNG_END_HSCH6_INT_ENA : R/W ;bitpos:[14] ;default: 1'b0 ; */
/*description: The interrupt enable bit for high speed channel 6 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH6_INT_ENA (BIT(14))
#define LEDC_DUTY_CHNG_END_HSCH6_INT_ENA_M (BIT(14))
#define LEDC_DUTY_CHNG_END_HSCH6_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH6_INT_ENA_S 14
/* LEDC_DUTY_CHNG_END_HSCH5_INT_ENA : R/W ;bitpos:[13] ;default: 1'b0 ; */
/*description: The interrupt enable bit for high speed channel 5 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH5_INT_ENA (BIT(13))
#define LEDC_DUTY_CHNG_END_HSCH5_INT_ENA_M (BIT(13))
#define LEDC_DUTY_CHNG_END_HSCH5_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH5_INT_ENA_S 13
/* LEDC_DUTY_CHNG_END_HSCH4_INT_ENA : R/W ;bitpos:[12] ;default: 1'b0 ; */
/*description: The interrupt enable bit for high speed channel 4 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH4_INT_ENA (BIT(12))
#define LEDC_DUTY_CHNG_END_HSCH4_INT_ENA_M (BIT(12))
#define LEDC_DUTY_CHNG_END_HSCH4_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH4_INT_ENA_S 12
/* LEDC_DUTY_CHNG_END_HSCH3_INT_ENA : R/W ;bitpos:[11] ;default: 1'b0 ; */
/*description: The interrupt enable bit for high speed channel 3 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH3_INT_ENA (BIT(11))
#define LEDC_DUTY_CHNG_END_HSCH3_INT_ENA_M (BIT(11))
#define LEDC_DUTY_CHNG_END_HSCH3_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH3_INT_ENA_S 11
/* LEDC_DUTY_CHNG_END_HSCH2_INT_ENA : R/W ;bitpos:[10] ;default: 1'b0 ; */
/*description: The interrupt enable bit for high speed channel 2 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH2_INT_ENA (BIT(10))
#define LEDC_DUTY_CHNG_END_HSCH2_INT_ENA_M (BIT(10))
#define LEDC_DUTY_CHNG_END_HSCH2_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH2_INT_ENA_S 10
/* LEDC_DUTY_CHNG_END_HSCH1_INT_ENA : R/W ;bitpos:[9] ;default: 1'b0 ; */
/*description: The interrupt enable bit for high speed channel 1 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH1_INT_ENA (BIT(9))
#define LEDC_DUTY_CHNG_END_HSCH1_INT_ENA_M (BIT(9))
#define LEDC_DUTY_CHNG_END_HSCH1_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH1_INT_ENA_S 9
/* LEDC_DUTY_CHNG_END_HSCH0_INT_ENA : R/W ;bitpos:[8] ;default: 1'b0 ; */
/*description: The interrupt enable bit for high speed channel 0 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH0_INT_ENA (BIT(8))
#define LEDC_DUTY_CHNG_END_HSCH0_INT_ENA_M (BIT(8))
#define LEDC_DUTY_CHNG_END_HSCH0_INT_ENA_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH0_INT_ENA_S 8
/* LEDC_LSTIMER3_OVF_INT_ENA : R/W ;bitpos:[7] ;default: 1'b0 ; */
/*description: The interrupt enable bit for low speed channel3 counter overflow interrupt.*/
#define LEDC_LSTIMER3_OVF_INT_ENA (BIT(7))
#define LEDC_LSTIMER3_OVF_INT_ENA_M (BIT(7))
#define LEDC_LSTIMER3_OVF_INT_ENA_V 0x1
#define LEDC_LSTIMER3_OVF_INT_ENA_S 7
/* LEDC_LSTIMER2_OVF_INT_ENA : R/W ;bitpos:[6] ;default: 1'b0 ; */
/*description: The interrupt enable bit for low speed channel2 counter overflow interrupt.*/
#define LEDC_LSTIMER2_OVF_INT_ENA (BIT(6))
#define LEDC_LSTIMER2_OVF_INT_ENA_M (BIT(6))
#define LEDC_LSTIMER2_OVF_INT_ENA_V 0x1
#define LEDC_LSTIMER2_OVF_INT_ENA_S 6
/* LEDC_LSTIMER1_OVF_INT_ENA : R/W ;bitpos:[5] ;default: 1'b0 ; */
/*description: The interrupt enable bit for low speed channel1 counter overflow interrupt.*/
#define LEDC_LSTIMER1_OVF_INT_ENA (BIT(5))
#define LEDC_LSTIMER1_OVF_INT_ENA_M (BIT(5))
#define LEDC_LSTIMER1_OVF_INT_ENA_V 0x1
#define LEDC_LSTIMER1_OVF_INT_ENA_S 5
/* LEDC_LSTIMER0_OVF_INT_ENA : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: The interrupt enable bit for low speed channel0 counter overflow interrupt.*/
#define LEDC_LSTIMER0_OVF_INT_ENA (BIT(4))
#define LEDC_LSTIMER0_OVF_INT_ENA_M (BIT(4))
#define LEDC_LSTIMER0_OVF_INT_ENA_V 0x1
#define LEDC_LSTIMER0_OVF_INT_ENA_S 4
/* LEDC_HSTIMER3_OVF_INT_ENA : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: The interrupt enable bit for high speed channel3 counter overflow interrupt.*/
#define LEDC_HSTIMER3_OVF_INT_ENA (BIT(3))
#define LEDC_HSTIMER3_OVF_INT_ENA_M (BIT(3))
#define LEDC_HSTIMER3_OVF_INT_ENA_V 0x1
#define LEDC_HSTIMER3_OVF_INT_ENA_S 3
/* LEDC_HSTIMER2_OVF_INT_ENA : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: The interrupt enable bit for high speed channel2 counter overflow interrupt.*/
#define LEDC_HSTIMER2_OVF_INT_ENA (BIT(2))
#define LEDC_HSTIMER2_OVF_INT_ENA_M (BIT(2))
#define LEDC_HSTIMER2_OVF_INT_ENA_V 0x1
#define LEDC_HSTIMER2_OVF_INT_ENA_S 2
/* LEDC_HSTIMER1_OVF_INT_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: The interrupt enable bit for high speed channel1 counter overflow interrupt.*/
#define LEDC_HSTIMER1_OVF_INT_ENA (BIT(1))
#define LEDC_HSTIMER1_OVF_INT_ENA_M (BIT(1))
#define LEDC_HSTIMER1_OVF_INT_ENA_V 0x1
#define LEDC_HSTIMER1_OVF_INT_ENA_S 1
/* LEDC_HSTIMER0_OVF_INT_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: The interrupt enable bit for high speed channel0 counter overflow interrupt.*/
#define LEDC_HSTIMER0_OVF_INT_ENA (BIT(0))
#define LEDC_HSTIMER0_OVF_INT_ENA_M (BIT(0))
#define LEDC_HSTIMER0_OVF_INT_ENA_V 0x1
#define LEDC_HSTIMER0_OVF_INT_ENA_S 0
#define LEDC_INT_CLR_REG (DR_REG_LEDC_BASE + 0x018C)
/* LEDC_DUTY_CHNG_END_LSCH7_INT_CLR : WO ;bitpos:[23] ;default: 1'h0 ; */
/*description: Set this bit to clear low speed channel 7 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH7_INT_CLR (BIT(23))
#define LEDC_DUTY_CHNG_END_LSCH7_INT_CLR_M (BIT(23))
#define LEDC_DUTY_CHNG_END_LSCH7_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH7_INT_CLR_S 23
/* LEDC_DUTY_CHNG_END_LSCH6_INT_CLR : WO ;bitpos:[22] ;default: 1'b0 ; */
/*description: Set this bit to clear low speed channel 6 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH6_INT_CLR (BIT(22))
#define LEDC_DUTY_CHNG_END_LSCH6_INT_CLR_M (BIT(22))
#define LEDC_DUTY_CHNG_END_LSCH6_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH6_INT_CLR_S 22
/* LEDC_DUTY_CHNG_END_LSCH5_INT_CLR : WO ;bitpos:[21] ;default: 1'b0 ; */
/*description: Set this bit to clear low speed channel 5 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH5_INT_CLR (BIT(21))
#define LEDC_DUTY_CHNG_END_LSCH5_INT_CLR_M (BIT(21))
#define LEDC_DUTY_CHNG_END_LSCH5_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH5_INT_CLR_S 21
/* LEDC_DUTY_CHNG_END_LSCH4_INT_CLR : WO ;bitpos:[20] ;default: 1'b0 ; */
/*description: Set this bit to clear low speed channel 4 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH4_INT_CLR (BIT(20))
#define LEDC_DUTY_CHNG_END_LSCH4_INT_CLR_M (BIT(20))
#define LEDC_DUTY_CHNG_END_LSCH4_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH4_INT_CLR_S 20
/* LEDC_DUTY_CHNG_END_LSCH3_INT_CLR : WO ;bitpos:[19] ;default: 1'b0 ; */
/*description: Set this bit to clear low speed channel 3 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH3_INT_CLR (BIT(19))
#define LEDC_DUTY_CHNG_END_LSCH3_INT_CLR_M (BIT(19))
#define LEDC_DUTY_CHNG_END_LSCH3_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH3_INT_CLR_S 19
/* LEDC_DUTY_CHNG_END_LSCH2_INT_CLR : WO ;bitpos:[18] ;default: 1'b0 ; */
/*description: Set this bit to clear low speed channel 2 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH2_INT_CLR (BIT(18))
#define LEDC_DUTY_CHNG_END_LSCH2_INT_CLR_M (BIT(18))
#define LEDC_DUTY_CHNG_END_LSCH2_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH2_INT_CLR_S 18
/* LEDC_DUTY_CHNG_END_LSCH1_INT_CLR : WO ;bitpos:[17] ;default: 1'b0 ; */
/*description: Set this bit to clear low speed channel 1 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH1_INT_CLR (BIT(17))
#define LEDC_DUTY_CHNG_END_LSCH1_INT_CLR_M (BIT(17))
#define LEDC_DUTY_CHNG_END_LSCH1_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH1_INT_CLR_S 17
/* LEDC_DUTY_CHNG_END_LSCH0_INT_CLR : WO ;bitpos:[16] ;default: 1'b0 ; */
/*description: Set this bit to clear low speed channel 0 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_LSCH0_INT_CLR (BIT(16))
#define LEDC_DUTY_CHNG_END_LSCH0_INT_CLR_M (BIT(16))
#define LEDC_DUTY_CHNG_END_LSCH0_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_LSCH0_INT_CLR_S 16
/* LEDC_DUTY_CHNG_END_HSCH7_INT_CLR : WO ;bitpos:[15] ;default: 1'b0 ; */
/*description: Set this bit to clear high speed channel 7 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH7_INT_CLR (BIT(15))
#define LEDC_DUTY_CHNG_END_HSCH7_INT_CLR_M (BIT(15))
#define LEDC_DUTY_CHNG_END_HSCH7_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH7_INT_CLR_S 15
/* LEDC_DUTY_CHNG_END_HSCH6_INT_CLR : WO ;bitpos:[14] ;default: 1'b0 ; */
/*description: Set this bit to clear high speed channel 6 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH6_INT_CLR (BIT(14))
#define LEDC_DUTY_CHNG_END_HSCH6_INT_CLR_M (BIT(14))
#define LEDC_DUTY_CHNG_END_HSCH6_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH6_INT_CLR_S 14
/* LEDC_DUTY_CHNG_END_HSCH5_INT_CLR : WO ;bitpos:[13] ;default: 1'b0 ; */
/*description: Set this bit to clear high speed channel 5 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH5_INT_CLR (BIT(13))
#define LEDC_DUTY_CHNG_END_HSCH5_INT_CLR_M (BIT(13))
#define LEDC_DUTY_CHNG_END_HSCH5_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH5_INT_CLR_S 13
/* LEDC_DUTY_CHNG_END_HSCH4_INT_CLR : WO ;bitpos:[12] ;default: 1'b0 ; */
/*description: Set this bit to clear high speed channel 4 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH4_INT_CLR (BIT(12))
#define LEDC_DUTY_CHNG_END_HSCH4_INT_CLR_M (BIT(12))
#define LEDC_DUTY_CHNG_END_HSCH4_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH4_INT_CLR_S 12
/* LEDC_DUTY_CHNG_END_HSCH3_INT_CLR : WO ;bitpos:[11] ;default: 1'b0 ; */
/*description: Set this bit to clear high speed channel 3 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH3_INT_CLR (BIT(11))
#define LEDC_DUTY_CHNG_END_HSCH3_INT_CLR_M (BIT(11))
#define LEDC_DUTY_CHNG_END_HSCH3_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH3_INT_CLR_S 11
/* LEDC_DUTY_CHNG_END_HSCH2_INT_CLR : WO ;bitpos:[10] ;default: 1'b0 ; */
/*description: Set this bit to clear high speed channel 2 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH2_INT_CLR (BIT(10))
#define LEDC_DUTY_CHNG_END_HSCH2_INT_CLR_M (BIT(10))
#define LEDC_DUTY_CHNG_END_HSCH2_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH2_INT_CLR_S 10
/* LEDC_DUTY_CHNG_END_HSCH1_INT_CLR : WO ;bitpos:[9] ;default: 1'b0 ; */
/*description: Set this bit to clear high speed channel 1 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH1_INT_CLR (BIT(9))
#define LEDC_DUTY_CHNG_END_HSCH1_INT_CLR_M (BIT(9))
#define LEDC_DUTY_CHNG_END_HSCH1_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH1_INT_CLR_S 9
/* LEDC_DUTY_CHNG_END_HSCH0_INT_CLR : WO ;bitpos:[8] ;default: 1'b0 ; */
/*description: Set this bit to clear high speed channel 0 duty change done interrupt.*/
#define LEDC_DUTY_CHNG_END_HSCH0_INT_CLR (BIT(8))
#define LEDC_DUTY_CHNG_END_HSCH0_INT_CLR_M (BIT(8))
#define LEDC_DUTY_CHNG_END_HSCH0_INT_CLR_V 0x1
#define LEDC_DUTY_CHNG_END_HSCH0_INT_CLR_S 8
/* LEDC_LSTIMER3_OVF_INT_CLR : WO ;bitpos:[7] ;default: 1'b0 ; */
/*description: Set this bit to clear low speed channel3 counter overflow interrupt.*/
#define LEDC_LSTIMER3_OVF_INT_CLR (BIT(7))
#define LEDC_LSTIMER3_OVF_INT_CLR_M (BIT(7))
#define LEDC_LSTIMER3_OVF_INT_CLR_V 0x1
#define LEDC_LSTIMER3_OVF_INT_CLR_S 7
/* LEDC_LSTIMER2_OVF_INT_CLR : WO ;bitpos:[6] ;default: 1'b0 ; */
/*description: Set this bit to clear low speed channel2 counter overflow interrupt.*/
#define LEDC_LSTIMER2_OVF_INT_CLR (BIT(6))
#define LEDC_LSTIMER2_OVF_INT_CLR_M (BIT(6))
#define LEDC_LSTIMER2_OVF_INT_CLR_V 0x1
#define LEDC_LSTIMER2_OVF_INT_CLR_S 6
/* LEDC_LSTIMER1_OVF_INT_CLR : WO ;bitpos:[5] ;default: 1'b0 ; */
/*description: Set this bit to clear low speed channel1 counter overflow interrupt.*/
#define LEDC_LSTIMER1_OVF_INT_CLR (BIT(5))
#define LEDC_LSTIMER1_OVF_INT_CLR_M (BIT(5))
#define LEDC_LSTIMER1_OVF_INT_CLR_V 0x1
#define LEDC_LSTIMER1_OVF_INT_CLR_S 5
/* LEDC_LSTIMER0_OVF_INT_CLR : WO ;bitpos:[4] ;default: 1'b0 ; */
/*description: Set this bit to clear low speed channel0 counter overflow interrupt.*/
#define LEDC_LSTIMER0_OVF_INT_CLR (BIT(4))
#define LEDC_LSTIMER0_OVF_INT_CLR_M (BIT(4))
#define LEDC_LSTIMER0_OVF_INT_CLR_V 0x1
#define LEDC_LSTIMER0_OVF_INT_CLR_S 4
/* LEDC_HSTIMER3_OVF_INT_CLR : WO ;bitpos:[3] ;default: 1'b0 ; */
/*description: Set this bit to clear high speed channel3 counter overflow interrupt.*/
#define LEDC_HSTIMER3_OVF_INT_CLR (BIT(3))
#define LEDC_HSTIMER3_OVF_INT_CLR_M (BIT(3))
#define LEDC_HSTIMER3_OVF_INT_CLR_V 0x1
#define LEDC_HSTIMER3_OVF_INT_CLR_S 3
/* LEDC_HSTIMER2_OVF_INT_CLR : WO ;bitpos:[2] ;default: 1'b0 ; */
/*description: Set this bit to clear high speed channel2 counter overflow interrupt.*/
#define LEDC_HSTIMER2_OVF_INT_CLR (BIT(2))
#define LEDC_HSTIMER2_OVF_INT_CLR_M (BIT(2))
#define LEDC_HSTIMER2_OVF_INT_CLR_V 0x1
#define LEDC_HSTIMER2_OVF_INT_CLR_S 2
/* LEDC_HSTIMER1_OVF_INT_CLR : WO ;bitpos:[1] ;default: 1'b0 ; */
/*description: Set this bit to clear high speed channel1 counter overflow interrupt.*/
#define LEDC_HSTIMER1_OVF_INT_CLR (BIT(1))
#define LEDC_HSTIMER1_OVF_INT_CLR_M (BIT(1))
#define LEDC_HSTIMER1_OVF_INT_CLR_V 0x1
#define LEDC_HSTIMER1_OVF_INT_CLR_S 1
/* LEDC_HSTIMER0_OVF_INT_CLR : WO ;bitpos:[0] ;default: 1'b0 ; */
/*description: Set this bit to clear high speed channel0 counter overflow interrupt.*/
#define LEDC_HSTIMER0_OVF_INT_CLR (BIT(0))
#define LEDC_HSTIMER0_OVF_INT_CLR_M (BIT(0))
#define LEDC_HSTIMER0_OVF_INT_CLR_V 0x1
#define LEDC_HSTIMER0_OVF_INT_CLR_S 0
#define LEDC_CONF_REG (DR_REG_LEDC_BASE + 0x0190)
/* LEDC_APB_CLK_SEL : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: This bit is used to set the frequency of slow_clk. 1'b1:80mhz 1'b0:8mhz*/
#define LEDC_APB_CLK_SEL (BIT(0))
#define LEDC_APB_CLK_SEL_M (BIT(0))
#define LEDC_APB_CLK_SEL_V 0x1
#define LEDC_APB_CLK_SEL_S 0
#define LEDC_DATE_REG (DR_REG_LEDC_BASE + 0x01FC)
/* LEDC_DATE : R/W ;bitpos:[31:0] ;default: 32'h16031700 ; */
/*description: This register represents the version .*/
#define LEDC_DATE 0xFFFFFFFF
#define LEDC_DATE_M ((LEDC_DATE_V)<<(LEDC_DATE_S))
#define LEDC_DATE_V 0xFFFFFFFF
#define LEDC_DATE_S 0
#endif /*_SOC_LEDC_REG_H_ */
Reference in New Issue View Git Blame Copy Permalink