5502879a5b
This is very much still work in progress and much more will change before the final 2.0.0 Some APIs have changed. New libraries have been added. LittleFS included. Co-authored-by: Seon Rozenblum <seonr@3sprockets.com> Co-authored-by: Me No Dev <me-no-dev@users.noreply.github.com> Co-authored-by: geeksville <kevinh@geeksville.com> Co-authored-by: Mike Dunston <m_dunston@comcast.net> Co-authored-by: Unexpected Maker <seon@unexpectedmaker.com> Co-authored-by: Seon Rozenblum <seonr@3sprockets.com> Co-authored-by: microDev <70126934+microDev1@users.noreply.github.com> Co-authored-by: tobozo <tobozo@users.noreply.github.com> Co-authored-by: bobobo1618 <bobobo1618@users.noreply.github.com> Co-authored-by: lorol <lorolouis@gmail.com> Co-authored-by: geeksville <kevinh@geeksville.com> Co-authored-by: Limor "Ladyada" Fried <limor@ladyada.net> Co-authored-by: Sweety <switi.mhaiske@espressif.com> Co-authored-by: Loick MAHIEUX <loick111@gmail.com> Co-authored-by: Larry Bernstone <lbernstone@gmail.com> Co-authored-by: Valerii Koval <valeros@users.noreply.github.com> Co-authored-by: 快乐的我531 <2302004040@qq.com> Co-authored-by: chegewara <imperiaonline4@gmail.com> Co-authored-by: Clemens Kirchgatterer <clemens@1541.org> Co-authored-by: Aron Rubin <aronrubin@gmail.com> Co-authored-by: Pete Lewis <601236+lewispg228@users.noreply.github.com>
80 lines
3.3 KiB
Plaintext
80 lines
3.3 KiB
Plaintext
/* ESP32 Linker Script Memory Layout
|
|
|
|
This file describes the memory layout (memory blocks) as virtual
|
|
memory addresses.
|
|
|
|
esp32.project.ld contains output sections to link compiler output
|
|
into these memory blocks.
|
|
|
|
***
|
|
|
|
This linker script is passed through the C preprocessor to include
|
|
configuration options.
|
|
|
|
Please use preprocessor features sparingly! Restrict
|
|
to simple macros with numeric values, and/or #if/#endif blocks.
|
|
*/
|
|
/*
|
|
* Automatically generated file. DO NOT EDIT.
|
|
* Espressif IoT Development Framework (ESP-IDF) Configuration Header
|
|
*/
|
|
|
|
/* List of deprecated options */
|
|
/* If BT is not built at all */
|
|
MEMORY
|
|
{
|
|
/* All these values assume the flash cache is on, and have the blocks this uses subtracted from the length
|
|
of the various regions. The 'data access port' dram/drom regions map to the same iram/irom regions but
|
|
are connected to the data port of the CPU and eg allow bytewise access. */
|
|
/* IRAM for PRO cpu. Not sure if happy with this, this is MMU area... */
|
|
iram0_0_seg (RX) : org = 0x40080000, len = 0x20000
|
|
/* Even though the segment name is iram, it is actually mapped to flash
|
|
*/
|
|
iram0_2_seg (RX) : org = 0x400D0020, len = 0x330000-0x20
|
|
/*
|
|
(0x20 offset above is a convenience for the app binary image generation.
|
|
Flash cache has 64KB pages. The .bin file which is flashed to the chip
|
|
has a 0x18 byte file header, and each segment has a 0x08 byte segment
|
|
header. Setting this offset makes it simple to meet the flash cache MMU's
|
|
constraint that (paddr % 64KB == vaddr % 64KB).)
|
|
*/
|
|
/* Shared data RAM, excluding memory reserved for ROM bss/data/stack.
|
|
|
|
Enabling Bluetooth & Trace Memory features in menuconfig will decrease
|
|
the amount of RAM available.
|
|
|
|
Note: Length of this section *should* be 0x50000, and this extra DRAM is available
|
|
in heap at runtime. However due to static ROM memory usage at this 176KB mark, the
|
|
additional static memory temporarily cannot be used.
|
|
*/
|
|
dram0_0_seg (RW) : org = 0x3FFB0000 + 0xdb5c,
|
|
len = 0x2c200 - 0xdb5c
|
|
/* Flash mapped constant data */
|
|
drom0_0_seg (R) : org = 0x3F400020, len = 0x400000-0x20
|
|
/* (See iram0_2_seg for meaning of 0x20 offset in the above.) */
|
|
/* RTC fast memory (executable). Persists over deep sleep.
|
|
*/
|
|
rtc_iram_seg(RWX) : org = 0x400C0000, len = 0x2000
|
|
/* RTC fast memory (same block as above), viewed from data bus */
|
|
rtc_data_seg(RW) : org = 0x3ff80000, len = 0x2000 - 0
|
|
/* RTC slow memory (data accessible). Persists over deep sleep.
|
|
|
|
Start of RTC slow memory is reserved for ULP co-processor code + data, if enabled.
|
|
*/
|
|
rtc_slow_seg(RW) : org = 0x50000000 + 512,
|
|
len = 0x2000 - 512
|
|
/* external memory ,including data and text */
|
|
extern_ram_seg(RWX) : org = 0x3F800000,
|
|
len = 0x400000
|
|
}
|
|
_static_data_end = _bss_end;
|
|
/* Heap ends at top of dram0_0_seg */
|
|
_heap_end = 0x40000000 - 0x0;
|
|
_data_seg_org = ORIGIN(rtc_data_seg);
|
|
/* The lines below define location alias for .rtc.data section based on Kconfig option.
|
|
When the option is not defined then use slow memory segment
|
|
else the data will be placed in fast memory segment */
|
|
REGION_ALIAS("rtc_data_location", rtc_slow_seg );
|
|
REGION_ALIAS("default_code_seg", iram0_2_seg);
|
|
REGION_ALIAS("default_rodata_seg", drom0_0_seg);
|