a59eafbc9d
* fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * Initial add of @stickbreaker i2c * Add log_n * fix warnings when log is off * i2c code clean up and reorganization * add flags to interrupt allocator * fix sdmmc config * Fix warnings in EEPROM from @Curclamas * remove leftover TAG in EEPROM * fix errors with latest IDF * fix debug optimization (#1365) incorrect optimization for debugging tick markers. * Fix some missing BT header * Change BTSerial log calls * Update BLE lib * Arduino-ESP32 release management scripted (#1515) * Calculate an absolute path for a custom partitions table (#1452) * * Arduino-ESP32 release management scripted (ready-to-merge) * * secure env for espressif/arduino-esp32 * * build tests enabled * gitter webhook enabled * * gitter room link fixed * better comment * * filepaths fixed * BT Serial adjustments * * don't run sketch builds & tests for tagged builds * Return false from WiFi.hostByName() if hostname is not resolved * Free BT Memory when BT is not used * WIFI_MODE_NULL is not supported anymore * Select some key examples to build with PlatformIO to save some time * Update BLE lib * Fixed BLE lib * Major WiFi overhaul - auto reconnect on connection loss now works - moved to event groups - some code clean up and procedure optimizations - new methods to get a more elaborate system ststus * Add cmake tests to travis * Add initial AsyncUDP * Add NetBIOS lib and fix CMake includes * Add Initial WebServer * Fix WebServer and examples * travis not quiting on build fail * Try different travis build * Update IDF to aaf1239 * Fix WPS Example * fix script permission and add some fail tests to sketch builder * Add missing space in WiFiClient::write(Stream &stream)
589 lines
23 KiB
C
589 lines
23 KiB
C
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
#ifndef _DRIVER_GPIO_H_
|
|
#define _DRIVER_GPIO_H_
|
|
#include "esp_err.h"
|
|
#include <esp_types.h>
|
|
#include "soc/gpio_reg.h"
|
|
#include "soc/gpio_struct.h"
|
|
#include "soc/rtc_io_reg.h"
|
|
#include "soc/io_mux_reg.h"
|
|
#include "soc/gpio_sig_map.h"
|
|
#include "rom/gpio.h"
|
|
#include "esp_attr.h"
|
|
#include "esp_intr_alloc.h"
|
|
#include "soc/gpio_periph.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#define GPIO_SEL_0 (BIT(0)) /*!< Pin 0 selected */
|
|
#define GPIO_SEL_1 (BIT(1)) /*!< Pin 1 selected */
|
|
#define GPIO_SEL_2 (BIT(2)) /*!< Pin 2 selected
|
|
@note There are more macros
|
|
like that up to pin 39,
|
|
excluding pins 20, 24 and 28..31.
|
|
They are not shown here
|
|
to reduce redundant information. */
|
|
/** @cond */
|
|
#define GPIO_SEL_3 (BIT(3)) /*!< Pin 3 selected */
|
|
#define GPIO_SEL_4 (BIT(4)) /*!< Pin 4 selected */
|
|
#define GPIO_SEL_5 (BIT(5)) /*!< Pin 5 selected */
|
|
#define GPIO_SEL_6 (BIT(6)) /*!< Pin 6 selected */
|
|
#define GPIO_SEL_7 (BIT(7)) /*!< Pin 7 selected */
|
|
#define GPIO_SEL_8 (BIT(8)) /*!< Pin 8 selected */
|
|
#define GPIO_SEL_9 (BIT(9)) /*!< Pin 9 selected */
|
|
#define GPIO_SEL_10 (BIT(10)) /*!< Pin 10 selected */
|
|
#define GPIO_SEL_11 (BIT(11)) /*!< Pin 11 selected */
|
|
#define GPIO_SEL_12 (BIT(12)) /*!< Pin 12 selected */
|
|
#define GPIO_SEL_13 (BIT(13)) /*!< Pin 13 selected */
|
|
#define GPIO_SEL_14 (BIT(14)) /*!< Pin 14 selected */
|
|
#define GPIO_SEL_15 (BIT(15)) /*!< Pin 15 selected */
|
|
#define GPIO_SEL_16 (BIT(16)) /*!< Pin 16 selected */
|
|
#define GPIO_SEL_17 (BIT(17)) /*!< Pin 17 selected */
|
|
#define GPIO_SEL_18 (BIT(18)) /*!< Pin 18 selected */
|
|
#define GPIO_SEL_19 (BIT(19)) /*!< Pin 19 selected */
|
|
|
|
#define GPIO_SEL_21 (BIT(21)) /*!< Pin 21 selected */
|
|
#define GPIO_SEL_22 (BIT(22)) /*!< Pin 22 selected */
|
|
#define GPIO_SEL_23 (BIT(23)) /*!< Pin 23 selected */
|
|
|
|
#define GPIO_SEL_25 (BIT(25)) /*!< Pin 25 selected */
|
|
#define GPIO_SEL_26 (BIT(26)) /*!< Pin 26 selected */
|
|
#define GPIO_SEL_27 (BIT(27)) /*!< Pin 27 selected */
|
|
|
|
#define GPIO_SEL_32 ((uint64_t)(((uint64_t)1)<<32)) /*!< Pin 32 selected */
|
|
#define GPIO_SEL_33 ((uint64_t)(((uint64_t)1)<<33)) /*!< Pin 33 selected */
|
|
#define GPIO_SEL_34 ((uint64_t)(((uint64_t)1)<<34)) /*!< Pin 34 selected */
|
|
#define GPIO_SEL_35 ((uint64_t)(((uint64_t)1)<<35)) /*!< Pin 35 selected */
|
|
#define GPIO_SEL_36 ((uint64_t)(((uint64_t)1)<<36)) /*!< Pin 36 selected */
|
|
#define GPIO_SEL_37 ((uint64_t)(((uint64_t)1)<<37)) /*!< Pin 37 selected */
|
|
#define GPIO_SEL_38 ((uint64_t)(((uint64_t)1)<<38)) /*!< Pin 38 selected */
|
|
#define GPIO_SEL_39 ((uint64_t)(((uint64_t)1)<<39)) /*!< Pin 39 selected */
|
|
|
|
#define GPIO_PIN_REG_0 IO_MUX_GPIO0_REG
|
|
#define GPIO_PIN_REG_1 IO_MUX_GPIO1_REG
|
|
#define GPIO_PIN_REG_2 IO_MUX_GPIO2_REG
|
|
#define GPIO_PIN_REG_3 IO_MUX_GPIO3_REG
|
|
#define GPIO_PIN_REG_4 IO_MUX_GPIO4_REG
|
|
#define GPIO_PIN_REG_5 IO_MUX_GPIO5_REG
|
|
#define GPIO_PIN_REG_6 IO_MUX_GPIO6_REG
|
|
#define GPIO_PIN_REG_7 IO_MUX_GPIO7_REG
|
|
#define GPIO_PIN_REG_8 IO_MUX_GPIO8_REG
|
|
#define GPIO_PIN_REG_9 IO_MUX_GPIO9_REG
|
|
#define GPIO_PIN_REG_10 IO_MUX_GPIO10_REG
|
|
#define GPIO_PIN_REG_11 IO_MUX_GPIO11_REG
|
|
#define GPIO_PIN_REG_12 IO_MUX_GPIO12_REG
|
|
#define GPIO_PIN_REG_13 IO_MUX_GPIO13_REG
|
|
#define GPIO_PIN_REG_14 IO_MUX_GPIO14_REG
|
|
#define GPIO_PIN_REG_15 IO_MUX_GPIO15_REG
|
|
#define GPIO_PIN_REG_16 IO_MUX_GPIO16_REG
|
|
#define GPIO_PIN_REG_17 IO_MUX_GPIO17_REG
|
|
#define GPIO_PIN_REG_18 IO_MUX_GPIO18_REG
|
|
#define GPIO_PIN_REG_19 IO_MUX_GPIO19_REG
|
|
#define GPIO_PIN_REG_20 IO_MUX_GPIO20_REG
|
|
#define GPIO_PIN_REG_21 IO_MUX_GPIO21_REG
|
|
#define GPIO_PIN_REG_22 IO_MUX_GPIO22_REG
|
|
#define GPIO_PIN_REG_23 IO_MUX_GPIO23_REG
|
|
#define GPIO_PIN_REG_25 IO_MUX_GPIO25_REG
|
|
#define GPIO_PIN_REG_26 IO_MUX_GPIO26_REG
|
|
#define GPIO_PIN_REG_27 IO_MUX_GPIO27_REG
|
|
#define GPIO_PIN_REG_32 IO_MUX_GPIO32_REG
|
|
#define GPIO_PIN_REG_33 IO_MUX_GPIO33_REG
|
|
#define GPIO_PIN_REG_34 IO_MUX_GPIO34_REG
|
|
#define GPIO_PIN_REG_35 IO_MUX_GPIO35_REG
|
|
#define GPIO_PIN_REG_36 IO_MUX_GPIO36_REG
|
|
#define GPIO_PIN_REG_37 IO_MUX_GPIO37_REG
|
|
#define GPIO_PIN_REG_38 IO_MUX_GPIO38_REG
|
|
#define GPIO_PIN_REG_39 IO_MUX_GPIO39_REG
|
|
|
|
#define GPIO_APP_CPU_INTR_ENA (BIT(0))
|
|
#define GPIO_APP_CPU_NMI_INTR_ENA (BIT(1))
|
|
#define GPIO_PRO_CPU_INTR_ENA (BIT(2))
|
|
#define GPIO_PRO_CPU_NMI_INTR_ENA (BIT(3))
|
|
#define GPIO_SDIO_EXT_INTR_ENA (BIT(4))
|
|
|
|
#define GPIO_MODE_DEF_DISABLE (0)
|
|
#define GPIO_MODE_DEF_INPUT (BIT0)
|
|
#define GPIO_MODE_DEF_OUTPUT (BIT1)
|
|
#define GPIO_MODE_DEF_OD (BIT2)
|
|
|
|
|
|
/** @endcond */
|
|
|
|
#define GPIO_IS_VALID_GPIO(gpio_num) ((gpio_num < GPIO_PIN_COUNT && GPIO_PIN_MUX_REG[gpio_num] != 0)) /*!< Check whether it is a valid GPIO number */
|
|
#define GPIO_IS_VALID_OUTPUT_GPIO(gpio_num) ((GPIO_IS_VALID_GPIO(gpio_num)) && (gpio_num < 34)) /*!< Check whether it can be a valid GPIO number of output mode */
|
|
|
|
typedef enum {
|
|
GPIO_NUM_0 = 0, /*!< GPIO0, input and output */
|
|
GPIO_NUM_1 = 1, /*!< GPIO1, input and output */
|
|
GPIO_NUM_2 = 2, /*!< GPIO2, input and output
|
|
@note There are more enumerations like that
|
|
up to GPIO39, excluding GPIO20, GPIO24 and GPIO28..31.
|
|
They are not shown here to reduce redundant information.
|
|
@note GPIO34..39 are input mode only. */
|
|
/** @cond */
|
|
GPIO_NUM_3 = 3, /*!< GPIO3, input and output */
|
|
GPIO_NUM_4 = 4, /*!< GPIO4, input and output */
|
|
GPIO_NUM_5 = 5, /*!< GPIO5, input and output */
|
|
GPIO_NUM_6 = 6, /*!< GPIO6, input and output */
|
|
GPIO_NUM_7 = 7, /*!< GPIO7, input and output */
|
|
GPIO_NUM_8 = 8, /*!< GPIO8, input and output */
|
|
GPIO_NUM_9 = 9, /*!< GPIO9, input and output */
|
|
GPIO_NUM_10 = 10, /*!< GPIO10, input and output */
|
|
GPIO_NUM_11 = 11, /*!< GPIO11, input and output */
|
|
GPIO_NUM_12 = 12, /*!< GPIO12, input and output */
|
|
GPIO_NUM_13 = 13, /*!< GPIO13, input and output */
|
|
GPIO_NUM_14 = 14, /*!< GPIO14, input and output */
|
|
GPIO_NUM_15 = 15, /*!< GPIO15, input and output */
|
|
GPIO_NUM_16 = 16, /*!< GPIO16, input and output */
|
|
GPIO_NUM_17 = 17, /*!< GPIO17, input and output */
|
|
GPIO_NUM_18 = 18, /*!< GPIO18, input and output */
|
|
GPIO_NUM_19 = 19, /*!< GPIO19, input and output */
|
|
|
|
GPIO_NUM_21 = 21, /*!< GPIO21, input and output */
|
|
GPIO_NUM_22 = 22, /*!< GPIO22, input and output */
|
|
GPIO_NUM_23 = 23, /*!< GPIO23, input and output */
|
|
|
|
GPIO_NUM_25 = 25, /*!< GPIO25, input and output */
|
|
GPIO_NUM_26 = 26, /*!< GPIO26, input and output */
|
|
GPIO_NUM_27 = 27, /*!< GPIO27, input and output */
|
|
|
|
GPIO_NUM_32 = 32, /*!< GPIO32, input and output */
|
|
GPIO_NUM_33 = 33, /*!< GPIO33, input and output */
|
|
GPIO_NUM_34 = 34, /*!< GPIO34, input mode only */
|
|
GPIO_NUM_35 = 35, /*!< GPIO35, input mode only */
|
|
GPIO_NUM_36 = 36, /*!< GPIO36, input mode only */
|
|
GPIO_NUM_37 = 37, /*!< GPIO37, input mode only */
|
|
GPIO_NUM_38 = 38, /*!< GPIO38, input mode only */
|
|
GPIO_NUM_39 = 39, /*!< GPIO39, input mode only */
|
|
GPIO_NUM_MAX = 40,
|
|
/** @endcond */
|
|
} gpio_num_t;
|
|
|
|
typedef enum {
|
|
GPIO_INTR_DISABLE = 0, /*!< Disable GPIO interrupt */
|
|
GPIO_INTR_POSEDGE = 1, /*!< GPIO interrupt type : rising edge */
|
|
GPIO_INTR_NEGEDGE = 2, /*!< GPIO interrupt type : falling edge */
|
|
GPIO_INTR_ANYEDGE = 3, /*!< GPIO interrupt type : both rising and falling edge */
|
|
GPIO_INTR_LOW_LEVEL = 4, /*!< GPIO interrupt type : input low level trigger */
|
|
GPIO_INTR_HIGH_LEVEL = 5, /*!< GPIO interrupt type : input high level trigger */
|
|
GPIO_INTR_MAX,
|
|
} gpio_int_type_t;
|
|
|
|
typedef enum {
|
|
GPIO_MODE_DISABLE = GPIO_MODE_DEF_DISABLE, /*!< GPIO mode : disable input and output */
|
|
GPIO_MODE_INPUT = GPIO_MODE_DEF_INPUT, /*!< GPIO mode : input only */
|
|
GPIO_MODE_OUTPUT = GPIO_MODE_DEF_OUTPUT, /*!< GPIO mode : output only mode */
|
|
GPIO_MODE_OUTPUT_OD = ((GPIO_MODE_DEF_OUTPUT)|(GPIO_MODE_DEF_OD)), /*!< GPIO mode : output only with open-drain mode */
|
|
GPIO_MODE_INPUT_OUTPUT_OD = ((GPIO_MODE_DEF_INPUT)|(GPIO_MODE_DEF_OUTPUT)|(GPIO_MODE_DEF_OD)), /*!< GPIO mode : output and input with open-drain mode*/
|
|
GPIO_MODE_INPUT_OUTPUT = ((GPIO_MODE_DEF_INPUT)|(GPIO_MODE_DEF_OUTPUT)), /*!< GPIO mode : output and input mode */
|
|
} gpio_mode_t;
|
|
|
|
typedef enum {
|
|
GPIO_PULLUP_DISABLE = 0x0, /*!< Disable GPIO pull-up resistor */
|
|
GPIO_PULLUP_ENABLE = 0x1, /*!< Enable GPIO pull-up resistor */
|
|
} gpio_pullup_t;
|
|
|
|
typedef enum {
|
|
GPIO_PULLDOWN_DISABLE = 0x0, /*!< Disable GPIO pull-down resistor */
|
|
GPIO_PULLDOWN_ENABLE = 0x1, /*!< Enable GPIO pull-down resistor */
|
|
} gpio_pulldown_t;
|
|
|
|
/**
|
|
* @brief Configuration parameters of GPIO pad for gpio_config function
|
|
*/
|
|
typedef struct {
|
|
uint64_t pin_bit_mask; /*!< GPIO pin: set with bit mask, each bit maps to a GPIO */
|
|
gpio_mode_t mode; /*!< GPIO mode: set input/output mode */
|
|
gpio_pullup_t pull_up_en; /*!< GPIO pull-up */
|
|
gpio_pulldown_t pull_down_en; /*!< GPIO pull-down */
|
|
gpio_int_type_t intr_type; /*!< GPIO interrupt type */
|
|
} gpio_config_t;
|
|
|
|
typedef enum {
|
|
GPIO_PULLUP_ONLY, /*!< Pad pull up */
|
|
GPIO_PULLDOWN_ONLY, /*!< Pad pull down */
|
|
GPIO_PULLUP_PULLDOWN, /*!< Pad pull up + pull down*/
|
|
GPIO_FLOATING, /*!< Pad floating */
|
|
} gpio_pull_mode_t;
|
|
|
|
typedef enum {
|
|
GPIO_DRIVE_CAP_0 = 0, /*!< Pad drive capability: weak */
|
|
GPIO_DRIVE_CAP_1 = 1, /*!< Pad drive capability: stronger */
|
|
GPIO_DRIVE_CAP_2 = 2, /*!< Pad drive capability: default value */
|
|
GPIO_DRIVE_CAP_DEFAULT = 2, /*!< Pad drive capability: default value */
|
|
GPIO_DRIVE_CAP_3 = 3, /*!< Pad drive capability: strongest */
|
|
GPIO_DRIVE_CAP_MAX,
|
|
} gpio_drive_cap_t;
|
|
|
|
typedef void (*gpio_isr_t)(void*);
|
|
typedef intr_handle_t gpio_isr_handle_t;
|
|
|
|
/**
|
|
* @brief GPIO common configuration
|
|
*
|
|
* Configure GPIO's Mode,pull-up,PullDown,IntrType
|
|
*
|
|
* @param pGPIOConfig Pointer to GPIO configure struct
|
|
*
|
|
* @return
|
|
* - ESP_OK success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*
|
|
*/
|
|
esp_err_t gpio_config(const gpio_config_t *pGPIOConfig);
|
|
|
|
/**
|
|
* @brief Reset an gpio to default state (select gpio function, enable pullup and disable input and output).
|
|
*
|
|
* @param gpio_num GPIO number.
|
|
*
|
|
* @note This function also configures the IOMUX for this pin to the GPIO
|
|
* function, and disconnects any other peripheral output configured via GPIO
|
|
* Matrix.
|
|
*
|
|
* @return Always return ESP_OK.
|
|
*/
|
|
esp_err_t gpio_reset_pin(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief GPIO set interrupt trigger type
|
|
*
|
|
* @param gpio_num GPIO number. If you want to set the trigger type of e.g. of GPIO16, gpio_num should be GPIO_NUM_16 (16);
|
|
* @param intr_type Interrupt type, select from gpio_int_type_t
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*
|
|
*/
|
|
esp_err_t gpio_set_intr_type(gpio_num_t gpio_num, gpio_int_type_t intr_type);
|
|
|
|
/**
|
|
* @brief Enable GPIO module interrupt signal
|
|
*
|
|
* @note Please do not use the interrupt of GPIO36 and GPIO39 when using ADC.
|
|
* Please refer to the comments of `adc1_get_raw`.
|
|
* Please refer to section 3.11 of 'ECO_and_Workarounds_for_Bugs_in_ESP32' for the description of this issue.
|
|
*
|
|
* @param gpio_num GPIO number. If you want to enable an interrupt on e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*
|
|
*/
|
|
esp_err_t gpio_intr_enable(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief Disable GPIO module interrupt signal
|
|
*
|
|
* @param gpio_num GPIO number. If you want to disable the interrupt of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
|
|
*
|
|
* @return
|
|
* - ESP_OK success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*
|
|
*/
|
|
esp_err_t gpio_intr_disable(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief GPIO set output level
|
|
*
|
|
* @param gpio_num GPIO number. If you want to set the output level of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
|
|
* @param level Output level. 0: low ; 1: high
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG GPIO number error
|
|
*
|
|
*/
|
|
esp_err_t gpio_set_level(gpio_num_t gpio_num, uint32_t level);
|
|
|
|
/**
|
|
* @brief GPIO get input level
|
|
*
|
|
* @warning If the pad is not configured for input (or input and output) the returned value is always 0.
|
|
*
|
|
* @param gpio_num GPIO number. If you want to get the logic level of e.g. pin GPIO16, gpio_num should be GPIO_NUM_16 (16);
|
|
*
|
|
* @return
|
|
* - 0 the GPIO input level is 0
|
|
* - 1 the GPIO input level is 1
|
|
*
|
|
*/
|
|
int gpio_get_level(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief GPIO set direction
|
|
*
|
|
* Configure GPIO direction,such as output_only,input_only,output_and_input
|
|
*
|
|
* @param gpio_num Configure GPIO pins number, it should be GPIO number. If you want to set direction of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
|
|
* @param mode GPIO direction
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG GPIO error
|
|
*
|
|
*/
|
|
esp_err_t gpio_set_direction(gpio_num_t gpio_num, gpio_mode_t mode);
|
|
|
|
/**
|
|
* @brief Configure GPIO pull-up/pull-down resistors
|
|
*
|
|
* Only pins that support both input & output have integrated pull-up and pull-down resistors. Input-only GPIOs 34-39 do not.
|
|
*
|
|
* @param gpio_num GPIO number. If you want to set pull up or down mode for e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
|
|
* @param pull GPIO pull up/down mode.
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG : Parameter error
|
|
*
|
|
*/
|
|
esp_err_t gpio_set_pull_mode(gpio_num_t gpio_num, gpio_pull_mode_t pull);
|
|
|
|
/**
|
|
* @brief Enable GPIO wake-up function.
|
|
*
|
|
* @param gpio_num GPIO number.
|
|
*
|
|
* @param intr_type GPIO wake-up type. Only GPIO_INTR_LOW_LEVEL or GPIO_INTR_HIGH_LEVEL can be used.
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t gpio_wakeup_enable(gpio_num_t gpio_num, gpio_int_type_t intr_type);
|
|
|
|
/**
|
|
* @brief Disable GPIO wake-up function.
|
|
*
|
|
* @param gpio_num GPIO number
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t gpio_wakeup_disable(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief Register GPIO interrupt handler, the handler is an ISR.
|
|
* The handler will be attached to the same CPU core that this function is running on.
|
|
*
|
|
* This ISR function is called whenever any GPIO interrupt occurs. See
|
|
* the alternative gpio_install_isr_service() and
|
|
* gpio_isr_handler_add() API in order to have the driver support
|
|
* per-GPIO ISRs.
|
|
*
|
|
* @param fn Interrupt handler function.
|
|
* @param intr_alloc_flags Flags used to allocate the interrupt. One or multiple (ORred)
|
|
* ESP_INTR_FLAG_* values. See esp_intr_alloc.h for more info.
|
|
* @param arg Parameter for handler function
|
|
* @param handle Pointer to return handle. If non-NULL, a handle for the interrupt will be returned here.
|
|
*
|
|
* \verbatim embed:rst:leading-asterisk
|
|
* To disable or remove the ISR, pass the returned handle to the :doc:`interrupt allocation functions </api-reference/system/intr_alloc>`.
|
|
* \endverbatim
|
|
*
|
|
* @return
|
|
* - ESP_OK Success ;
|
|
* - ESP_ERR_INVALID_ARG GPIO error
|
|
* - ESP_ERR_NOT_FOUND No free interrupt found with the specified flags
|
|
*/
|
|
esp_err_t gpio_isr_register(void (*fn)(void*), void * arg, int intr_alloc_flags, gpio_isr_handle_t *handle);
|
|
|
|
/**
|
|
* @brief Enable pull-up on GPIO.
|
|
*
|
|
* @param gpio_num GPIO number
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t gpio_pullup_en(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief Disable pull-up on GPIO.
|
|
*
|
|
* @param gpio_num GPIO number
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t gpio_pullup_dis(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief Enable pull-down on GPIO.
|
|
*
|
|
* @param gpio_num GPIO number
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t gpio_pulldown_en(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief Disable pull-down on GPIO.
|
|
*
|
|
* @param gpio_num GPIO number
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t gpio_pulldown_dis(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief Install the driver's GPIO ISR handler service, which allows per-pin GPIO interrupt handlers.
|
|
*
|
|
* This function is incompatible with gpio_isr_register() - if that function is used, a single global ISR is registered for all GPIO interrupts. If this function is used, the ISR service provides a global GPIO ISR and individual pin handlers are registered via the gpio_isr_handler_add() function.
|
|
*
|
|
* @param intr_alloc_flags Flags used to allocate the interrupt. One or multiple (ORred)
|
|
* ESP_INTR_FLAG_* values. See esp_intr_alloc.h for more info.
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_NO_MEM No memory to install this service
|
|
* - ESP_ERR_INVALID_STATE ISR service already installed.
|
|
* - ESP_ERR_NOT_FOUND No free interrupt found with the specified flags
|
|
* - ESP_ERR_INVALID_ARG GPIO error
|
|
*/
|
|
esp_err_t gpio_install_isr_service(int intr_alloc_flags);
|
|
|
|
/**
|
|
* @brief Uninstall the driver's GPIO ISR service, freeing related resources.
|
|
*/
|
|
void gpio_uninstall_isr_service();
|
|
|
|
/**
|
|
* @brief Add ISR handler for the corresponding GPIO pin.
|
|
*
|
|
* Call this function after using gpio_install_isr_service() to
|
|
* install the driver's GPIO ISR handler service.
|
|
*
|
|
* The pin ISR handlers no longer need to be declared with IRAM_ATTR,
|
|
* unless you pass the ESP_INTR_FLAG_IRAM flag when allocating the
|
|
* ISR in gpio_install_isr_service().
|
|
*
|
|
* This ISR handler will be called from an ISR. So there is a stack
|
|
* size limit (configurable as "ISR stack size" in menuconfig). This
|
|
* limit is smaller compared to a global GPIO interrupt handler due
|
|
* to the additional level of indirection.
|
|
*
|
|
* @param gpio_num GPIO number
|
|
* @param isr_handler ISR handler function for the corresponding GPIO number.
|
|
* @param args parameter for ISR handler.
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_STATE Wrong state, the ISR service has not been initialized.
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t gpio_isr_handler_add(gpio_num_t gpio_num, gpio_isr_t isr_handler, void* args);
|
|
|
|
/**
|
|
* @brief Remove ISR handler for the corresponding GPIO pin.
|
|
*
|
|
* @param gpio_num GPIO number
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_STATE Wrong state, the ISR service has not been initialized.
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t gpio_isr_handler_remove(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief Set GPIO pad drive capability
|
|
*
|
|
* @param gpio_num GPIO number, only support output GPIOs
|
|
* @param strength Drive capability of the pad
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t gpio_set_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t strength);
|
|
|
|
/**
|
|
* @brief Get GPIO pad drive capability
|
|
*
|
|
* @param gpio_num GPIO number, only support output GPIOs
|
|
* @param strength Pointer to accept drive capability of the pad
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_INVALID_ARG Parameter error
|
|
*/
|
|
esp_err_t gpio_get_drive_capability(gpio_num_t gpio_num, gpio_drive_cap_t* strength);
|
|
|
|
/**
|
|
* @brief Set gpio pad hold function.
|
|
*
|
|
* The gpio pad hold function works in both input and output modes, but must be output-capable gpios.
|
|
* If pad hold enabled:
|
|
* in output mode: the output level of the pad will be force locked and can not be changed.
|
|
* in input mode: the input value read will not change, regardless the changes of input signal.
|
|
*
|
|
* Power down or call gpio_hold_dis will disable this function.
|
|
*
|
|
* @param gpio_num GPIO number, only support output-capable GPIOs
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_NOT_SUPPORTED Not support pad hold function
|
|
*/
|
|
esp_err_t gpio_hold_en(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief Unset gpio pad hold function.
|
|
*
|
|
* @param gpio_num GPIO number, only support output-capable GPIOs
|
|
*
|
|
* @return
|
|
* - ESP_OK Success
|
|
* - ESP_ERR_NOT_SUPPORTED Not support pad hold function
|
|
*/
|
|
esp_err_t gpio_hold_dis(gpio_num_t gpio_num);
|
|
|
|
/**
|
|
* @brief Set pad input to a peripheral signal through the IOMUX.
|
|
* @param gpio_num GPIO number of the pad.
|
|
* @param signal_idx Peripheral signal id to input. One of the ``*_IN_IDX`` signals in ``soc/gpio_sig_map.h``.
|
|
*/
|
|
void gpio_iomux_in(uint32_t gpio_num, uint32_t signal_idx);
|
|
|
|
/**
|
|
* @brief Set peripheral output to an GPIO pad through the IOMUX.
|
|
* @param gpio_num gpio_num GPIO number of the pad.
|
|
* @param func The function number of the peripheral pin to output pin.
|
|
* One of the ``FUNC_X_*`` of specified pin (X) in ``soc/io_mux_reg.h``.
|
|
* @param oen_inv True if the output enable needs to be inversed, otherwise False.
|
|
*/
|
|
void gpio_iomux_out(uint8_t gpio_num, int func, bool oen_inv);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* _DRIVER_GPIO_H_ */
|