3198f25c19
When user selected HSPI with SPIClass name(HSPI) ESP was, by default, still using VSPI ports (the ones defined in pins_arduino.h). With this change when user selects HSPI then HSPI default ports will be used. If user won't specify HSPI then VSPI default ports will be used. If user will specify SCLK, MOSI, MISO and SS with SPI.begin() then user defined ports will be used no matter if VSPI or HSPI is selected. With this change fe. SD library can use default HSPI ports. It was possible to pass HSPI SPI instance to SD lib, however even then it was using VSPI ports which were (probably) GPIO matrixed to HSPI. |
||
|---|---|---|
| cores/esp32 | ||
| docs | ||
| libraries | ||
| package | ||
| tools | ||
| variants | ||
| .gitignore | ||
| .gitmodules | ||
| .travis.yml | ||
| appveyor.yml | ||
| boards.txt | ||
| component.mk | ||
| Kconfig | ||
| Makefile.projbuild | ||
| package.json | ||
| platform.txt | ||
| programmers.txt | ||
| README.md | ||
Arduino core for ESP32 WiFi chip
Need help or have a question? Join the chat at 
Contents
- Development Status
- Installation Instructions
- Decoding Exceptions
- Issue/Bug report template
- ESP32Dev Board PINMAP
Development Status
Most of the framework is implemented. Most noticable is the missing analogWrite. While analogWrite is on it's way, there are a few other options that you can use:
- 16 channels LEDC which is PWM
- 8 channels SigmaDelta which uses SigmaDelta modulation
- 2 channels DAC which gives real analog output
Installation Instructions
- Using Arduino IDE
- Using PlatformIO
- Building with make
- Using as ESP-IDF component
Decoding exceptions
You can use EspExceptionDecoder to get meaningful call trace.
Issue/Bug report template
Before reporting an issue, make sure you've searched for similar one that was already created. Also make sure to go through all the issues labelled as for reference.
Finally, if you're sure no one else had the issue, follow the ISSUE_TEMPLATE while reporting any issue.
ESP32Dev Board PINMAP
Hint
Sometimes to program ESP32 via serial you must keep GPIO0 LOW during the programming process