667 lines
19 KiB
C
667 lines
19 KiB
C
/*
|
|
* Copyright (c) 2001-2003 Swedish Institute of Computer Science.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
|
|
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
|
|
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
* OF SUCH DAMAGE.
|
|
*
|
|
* This file is part of the lwIP TCP/IP stack.
|
|
*
|
|
* Author: Simon Goldschmidt
|
|
*
|
|
*/
|
|
#ifndef __LWIPOPTS_H__
|
|
#define __LWIPOPTS_H__
|
|
|
|
#include <stdlib.h>
|
|
#include <time.h>
|
|
#include <sys/time.h>
|
|
#include <sys/fcntl.h>
|
|
#include "esp_task.h"
|
|
#include "sdkconfig.h"
|
|
|
|
/* Enable all Espressif-only options */
|
|
|
|
/*
|
|
-----------------------------------------------
|
|
---------- Platform specific locking ----------
|
|
-----------------------------------------------
|
|
*/
|
|
/**
|
|
* SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
|
|
* critical regions during buffer allocation, deallocation and memory
|
|
* allocation and deallocation.
|
|
*/
|
|
#define SYS_LIGHTWEIGHT_PROT 1
|
|
|
|
/**
|
|
* MEMCPY: override this if you have a faster implementation at hand than the
|
|
* one included in your C library
|
|
*/
|
|
#define MEMCPY(dst,src,len) memcpy(dst,src,len)
|
|
|
|
/**
|
|
* SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a
|
|
* call to memcpy() if the length is known at compile time and is small.
|
|
*/
|
|
#define SMEMCPY(dst,src,len) memcpy(dst,src,len)
|
|
|
|
#define LWIP_RAND rand
|
|
|
|
/*
|
|
------------------------------------
|
|
---------- Memory options ----------
|
|
------------------------------------
|
|
*/
|
|
/**
|
|
* MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library
|
|
* instead of the lwip internal allocator. Can save code size if you
|
|
* already use it.
|
|
*/
|
|
#define MEM_LIBC_MALLOC 1
|
|
|
|
/**
|
|
* MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator.
|
|
* Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution
|
|
* speed and usage from interrupts!
|
|
*/
|
|
#define MEMP_MEM_MALLOC 1
|
|
|
|
/**
|
|
* MEM_ALIGNMENT: should be set to the alignment of the CPU
|
|
* 4 byte alignment -> #define MEM_ALIGNMENT 4
|
|
* 2 byte alignment -> #define MEM_ALIGNMENT 2
|
|
*/
|
|
#define MEM_ALIGNMENT 4
|
|
|
|
/*
|
|
------------------------------------------------
|
|
---------- Internal Memory Pool Sizes ----------
|
|
------------------------------------------------
|
|
*/
|
|
|
|
/**
|
|
* MEMP_NUM_NETCONN: the number of struct netconns.
|
|
* (only needed if you use the sequential API, like api_lib.c)
|
|
*/
|
|
#define MEMP_NUM_NETCONN CONFIG_LWIP_MAX_SOCKETS
|
|
|
|
/**
|
|
* MEMP_NUM_RAW_PCB: Number of raw connection PCBs
|
|
* (requires the LWIP_RAW option)
|
|
*/
|
|
#define MEMP_NUM_RAW_PCB 16
|
|
|
|
/**
|
|
* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections.
|
|
* (requires the LWIP_TCP option)
|
|
*/
|
|
#define MEMP_NUM_TCP_PCB 16
|
|
|
|
/**
|
|
* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections.
|
|
* (requires the LWIP_TCP option)
|
|
*/
|
|
#define MEMP_NUM_TCP_PCB_LISTEN 16
|
|
|
|
/**
|
|
* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
|
|
* per active UDP "connection".
|
|
* (requires the LWIP_UDP option)
|
|
*/
|
|
#define MEMP_NUM_UDP_PCB 16
|
|
|
|
/*
|
|
--------------------------------
|
|
---------- ARP options -------
|
|
--------------------------------
|
|
*/
|
|
/**
|
|
* ARP_QUEUEING==1: Multiple outgoing packets are queued during hardware address
|
|
* resolution. By default, only the most recent packet is queued per IP address.
|
|
* This is sufficient for most protocols and mainly reduces TCP connection
|
|
* startup time. Set this to 1 if you know your application sends more than one
|
|
* packet in a row to an IP address that is not in the ARP cache.
|
|
*/
|
|
#define ARP_QUEUEING 1
|
|
|
|
/*
|
|
--------------------------------
|
|
---------- IP options ----------
|
|
--------------------------------
|
|
*/
|
|
/**
|
|
* IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that
|
|
* this option does not affect outgoing packet sizes, which can be controlled
|
|
* via IP_FRAG.
|
|
*/
|
|
#define IP_REASSEMBLY CONFIG_LWIP_IP_REASSEMBLY
|
|
|
|
/**
|
|
* IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note
|
|
* that this option does not affect incoming packet sizes, which can be
|
|
* controlled via IP_REASSEMBLY.
|
|
*/
|
|
#define IP_FRAG CONFIG_LWIP_IP_FRAG
|
|
|
|
/**
|
|
* IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally)
|
|
* a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived
|
|
* in this time, the whole packet is discarded.
|
|
*/
|
|
#define IP_REASS_MAXAGE 3
|
|
|
|
/**
|
|
* IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.
|
|
* Since the received pbufs are enqueued, be sure to configure
|
|
* PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive
|
|
* packets even if the maximum amount of fragments is enqueued for reassembly!
|
|
*/
|
|
#define IP_REASS_MAX_PBUFS 10
|
|
|
|
/*
|
|
----------------------------------
|
|
---------- ICMP options ----------
|
|
----------------------------------
|
|
*/
|
|
|
|
/*
|
|
---------------------------------
|
|
---------- RAW options ----------
|
|
---------------------------------
|
|
*/
|
|
/**
|
|
* LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
|
|
*/
|
|
#define LWIP_RAW 1
|
|
|
|
/*
|
|
----------------------------------
|
|
---------- DHCP options ----------
|
|
----------------------------------
|
|
*/
|
|
/**
|
|
* LWIP_DHCP==1: Enable DHCP module.
|
|
*/
|
|
#define LWIP_DHCP 1
|
|
|
|
#define DHCP_MAXRTX 0
|
|
|
|
/*
|
|
------------------------------------
|
|
---------- AUTOIP options ----------
|
|
------------------------------------
|
|
*/
|
|
#if CONFIG_MDNS
|
|
/**
|
|
* LWIP_AUTOIP==1: Enable AUTOIP module.
|
|
*/
|
|
#define LWIP_AUTOIP 1
|
|
|
|
/**
|
|
* LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on
|
|
* the same interface at the same time.
|
|
*/
|
|
#define LWIP_DHCP_AUTOIP_COOP 1
|
|
|
|
/**
|
|
* LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes
|
|
* that should be sent before falling back on AUTOIP. This can be set
|
|
* as low as 1 to get an AutoIP address very quickly, but you should
|
|
* be prepared to handle a changing IP address when DHCP overrides
|
|
* AutoIP.
|
|
*/
|
|
#define LWIP_DHCP_AUTOIP_COOP_TRIES 2
|
|
#endif
|
|
|
|
/*
|
|
----------------------------------
|
|
---------- SNMP options ----------
|
|
----------------------------------
|
|
*/
|
|
/*
|
|
----------------------------------
|
|
---------- IGMP options ----------
|
|
----------------------------------
|
|
*/
|
|
/**
|
|
* LWIP_IGMP==1: Turn on IGMP module.
|
|
*/
|
|
#define LWIP_IGMP 1
|
|
|
|
/*
|
|
----------------------------------
|
|
---------- DNS options -----------
|
|
----------------------------------
|
|
*/
|
|
/**
|
|
* LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS
|
|
* transport.
|
|
*/
|
|
#define LWIP_DNS 1
|
|
|
|
/*
|
|
---------------------------------
|
|
---------- UDP options ----------
|
|
---------------------------------
|
|
*/
|
|
/*
|
|
---------------------------------
|
|
---------- TCP options ----------
|
|
---------------------------------
|
|
*/
|
|
|
|
|
|
/**
|
|
* TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order.
|
|
* Define to 0 if your device is low on memory.
|
|
*/
|
|
#define TCP_QUEUE_OOSEQ 1
|
|
|
|
/*
|
|
* LWIP_EVENT_API==1: The user defines lwip_tcp_event() to receive all
|
|
* events (accept, sent, etc) that happen in the system.
|
|
* LWIP_CALLBACK_API==1: The PCB callback function is called directly
|
|
* for the event. This is the default.
|
|
*/
|
|
#define TCP_MSS 1460
|
|
|
|
/**
|
|
* TCP_MAXRTX: Maximum number of retransmissions of data segments.
|
|
*/
|
|
#define TCP_MAXRTX 12 //(*(volatile uint32*)0x600011E8)
|
|
|
|
/**
|
|
* TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments.
|
|
*/
|
|
#define TCP_SYNMAXRTX 6 //(*(volatile uint32*)0x600011E4)
|
|
|
|
/**
|
|
* TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb.
|
|
*/
|
|
#define TCP_LISTEN_BACKLOG 1
|
|
|
|
/*
|
|
----------------------------------
|
|
---------- Pbuf options ----------
|
|
----------------------------------
|
|
*/
|
|
|
|
/*
|
|
------------------------------------------------
|
|
---------- Network Interfaces options ----------
|
|
------------------------------------------------
|
|
*/
|
|
|
|
/**
|
|
* LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname
|
|
* field.
|
|
*/
|
|
#define LWIP_NETIF_HOSTNAME 1
|
|
|
|
/**
|
|
* LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data
|
|
* to be sent into one single pbuf. This is for compatibility with DMA-enabled
|
|
* MACs that do not support scatter-gather.
|
|
* Beware that this might involve CPU-memcpy before transmitting that would not
|
|
* be needed without this flag! Use this only if you need to!
|
|
*
|
|
* @todo: TCP and IP-frag do not work with this, yet:
|
|
*/
|
|
#define LWIP_NETIF_TX_SINGLE_PBUF 1
|
|
|
|
/*
|
|
------------------------------------
|
|
---------- LOOPIF options ----------
|
|
------------------------------------
|
|
*/
|
|
#if CONFIG_MDNS
|
|
/**
|
|
* LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP
|
|
* address equal to the netif IP address, looping them back up the stack.
|
|
*/
|
|
#define LWIP_NETIF_LOOPBACK 1
|
|
|
|
/**
|
|
* LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback
|
|
* sending for each netif (0 = disabled)
|
|
*/
|
|
#define LWIP_LOOPBACK_MAX_PBUFS 8
|
|
#endif
|
|
|
|
/*
|
|
------------------------------------
|
|
---------- SLIPIF options ----------
|
|
------------------------------------
|
|
*/
|
|
|
|
/*
|
|
------------------------------------
|
|
---------- Thread options ----------
|
|
------------------------------------
|
|
*/
|
|
/**
|
|
* TCPIP_THREAD_NAME: The name assigned to the main tcpip thread.
|
|
*/
|
|
#define TCPIP_THREAD_NAME "tiT"
|
|
|
|
/**
|
|
* TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread.
|
|
* The stack size value itself is platform-dependent, but is passed to
|
|
* sys_thread_new() when the thread is created.
|
|
*/
|
|
#define TCPIP_THREAD_STACKSIZE ESP_TASK_TCPIP_STACK
|
|
|
|
/**
|
|
* TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread.
|
|
* The priority value itself is platform-dependent, but is passed to
|
|
* sys_thread_new() when the thread is created.
|
|
*/
|
|
#define TCPIP_THREAD_PRIO ESP_TASK_TCPIP_PRIO
|
|
|
|
/**
|
|
* TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages
|
|
* The queue size value itself is platform-dependent, but is passed to
|
|
* sys_mbox_new() when tcpip_init is called.
|
|
*/
|
|
#define TCPIP_MBOX_SIZE 32
|
|
|
|
/**
|
|
* DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
|
|
* NETCONN_UDP. The queue size value itself is platform-dependent, but is passed
|
|
* to sys_mbox_new() when the recvmbox is created.
|
|
*/
|
|
#define DEFAULT_UDP_RECVMBOX_SIZE 6
|
|
|
|
/**
|
|
* DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
|
|
* NETCONN_TCP. The queue size value itself is platform-dependent, but is passed
|
|
* to sys_mbox_new() when the recvmbox is created.
|
|
*/
|
|
#define DEFAULT_TCP_RECVMBOX_SIZE 6
|
|
|
|
/**
|
|
* DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections.
|
|
* The queue size value itself is platform-dependent, but is passed to
|
|
* sys_mbox_new() when the acceptmbox is created.
|
|
*/
|
|
#define DEFAULT_ACCEPTMBOX_SIZE 6
|
|
|
|
/**
|
|
* DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread.
|
|
* The stack size value itself is platform-dependent, but is passed to
|
|
* sys_thread_new() when the thread is created.
|
|
*/
|
|
#define DEFAULT_THREAD_STACKSIZE TCPIP_THREAD_STACKSIZE
|
|
|
|
/**
|
|
* DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread.
|
|
* The priority value itself is platform-dependent, but is passed to
|
|
* sys_thread_new() when the thread is created.
|
|
*/
|
|
#define DEFAULT_THREAD_PRIO TCPIP_THREAD_PRIO
|
|
|
|
/**
|
|
* DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
|
|
* NETCONN_RAW. The queue size value itself is platform-dependent, but is passed
|
|
* to sys_mbox_new() when the recvmbox is created.
|
|
*/
|
|
#define DEFAULT_RAW_RECVMBOX_SIZE 6
|
|
|
|
/*
|
|
----------------------------------------------
|
|
---------- Sequential layer options ----------
|
|
----------------------------------------------
|
|
*/
|
|
/**
|
|
* LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!)
|
|
* Don't use it if you're not an active lwIP project member
|
|
*/
|
|
#define LWIP_TCPIP_CORE_LOCKING 0
|
|
|
|
/*
|
|
------------------------------------
|
|
---------- Socket options ----------
|
|
------------------------------------
|
|
*/
|
|
/**
|
|
* LWIP_SO_SNDTIMEO==1: Enable send timeout for sockets/netconns and
|
|
* SO_SNDTIMEO processing.
|
|
*/
|
|
#define LWIP_SO_SNDTIMEO 1
|
|
|
|
/**
|
|
* LWIP_SO_RCVTIMEO==1: Enable receive timeout for sockets/netconns and
|
|
* SO_RCVTIMEO processing.
|
|
*/
|
|
#define LWIP_SO_RCVTIMEO 1
|
|
|
|
/**
|
|
* LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT
|
|
* options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set
|
|
* in seconds. (does not require sockets.c, and will affect tcp.c)
|
|
*/
|
|
#define LWIP_TCP_KEEPALIVE 1
|
|
|
|
/**
|
|
* LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.
|
|
*/
|
|
#define LWIP_SO_RCVBUF CONFIG_LWIP_SO_RCVBUF
|
|
|
|
/**
|
|
* SO_REUSE==1: Enable SO_REUSEADDR option.
|
|
* This option is set via menuconfig.
|
|
*/
|
|
#define SO_REUSE CONFIG_LWIP_SO_REUSE
|
|
|
|
#if CONFIG_MDNS
|
|
/**
|
|
* SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets
|
|
* to all local matches if SO_REUSEADDR is turned on.
|
|
* WARNING: Adds a memcpy for every packet if passing to more than one pcb!
|
|
*/
|
|
#define SO_REUSE_RXTOALL 1
|
|
#endif
|
|
|
|
/*
|
|
----------------------------------------
|
|
---------- Statistics options ----------
|
|
----------------------------------------
|
|
*/
|
|
/**
|
|
* LWIP_STATS==1: Enable statistics collection in lwip_stats.
|
|
*/
|
|
#define LWIP_STATS 0
|
|
|
|
/*
|
|
---------------------------------
|
|
---------- PPP options ----------
|
|
---------------------------------
|
|
*/
|
|
|
|
/*
|
|
--------------------------------------
|
|
---------- Checksum options ----------
|
|
--------------------------------------
|
|
*/
|
|
|
|
/*
|
|
---------------------------------------
|
|
---------- IPv6 options ---------------
|
|
---------------------------------------
|
|
*/
|
|
/**
|
|
* LWIP_IPV6==1: Enable IPv6
|
|
*/
|
|
#define LWIP_IPV6 1
|
|
|
|
/*
|
|
---------------------------------------
|
|
---------- Hook options ---------------
|
|
---------------------------------------
|
|
*/
|
|
|
|
/*
|
|
---------------------------------------
|
|
---------- Debugging options ----------
|
|
---------------------------------------
|
|
*/
|
|
/**
|
|
* ETHARP_DEBUG: Enable debugging in etharp.c.
|
|
*/
|
|
#define ETHARP_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* NETIF_DEBUG: Enable debugging in netif.c.
|
|
*/
|
|
#define NETIF_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* PBUF_DEBUG: Enable debugging in pbuf.c.
|
|
*/
|
|
#define PBUF_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* API_LIB_DEBUG: Enable debugging in api_lib.c.
|
|
*/
|
|
#define API_LIB_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* SOCKETS_DEBUG: Enable debugging in sockets.c.
|
|
*/
|
|
#define SOCKETS_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* ICMP_DEBUG: Enable debugging in icmp.c.
|
|
*/
|
|
#define ICMP_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* IP_DEBUG: Enable debugging for IP.
|
|
*/
|
|
#define IP_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* MEMP_DEBUG: Enable debugging in memp.c.
|
|
*/
|
|
#define MEMP_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug.
|
|
*/
|
|
#define TCP_INPUT_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions.
|
|
*/
|
|
#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF
|
|
|
|
/**
|
|
* TCPIP_DEBUG: Enable debugging in tcpip.c.
|
|
*/
|
|
#define TCPIP_DEBUG LWIP_DBG_OFF
|
|
|
|
|
|
/* Enable all Espressif-only options */
|
|
|
|
#define ESP_LWIP 1
|
|
#define ESP_LWIP_ARP 1
|
|
#define ESP_PER_SOC_TCP_WND 1
|
|
#define ESP_THREAD_SAFE 1
|
|
#define ESP_THREAD_SAFE_DEBUG LWIP_DBG_OFF
|
|
#define ESP_DHCP 1
|
|
#define ESP_DNS 1
|
|
#define ESP_IPV6_AUTOCONFIG 1
|
|
#define ESP_PERF 0
|
|
#define ESP_RANDOM_TCP_PORT 1
|
|
#define ESP_IP4_ATON 1
|
|
#define ESP_LIGHT_SLEEP 1
|
|
#define ESP_L2_TO_L3_COPY CONFIG_L2_TO_L3_COPY
|
|
#define ESP_CNT_DEBUG 0
|
|
|
|
#define TCP_WND_DEFAULT (4*TCP_MSS)
|
|
#define TCP_SND_BUF_DEFAULT (2*TCP_MSS)
|
|
|
|
#if ESP_PERF
|
|
#define DBG_PERF_PATH_SET(dir, point)
|
|
#define DBG_PERF_FILTER_LEN 1000
|
|
|
|
enum {
|
|
DBG_PERF_DIR_RX = 0,
|
|
DBG_PERF_DIR_TX,
|
|
};
|
|
|
|
enum {
|
|
DBG_PERF_POINT_INT = 0,
|
|
DBG_PERF_POINT_WIFI_IN = 1,
|
|
DBG_PERF_POINT_WIFI_OUT = 2,
|
|
DBG_PERF_POINT_LWIP_IN = 3,
|
|
DBG_PERF_POINT_LWIP_OUT = 4,
|
|
DBG_PERF_POINT_SOC_IN = 5,
|
|
DBG_PERF_POINT_SOC_OUT = 6,
|
|
};
|
|
|
|
#else
|
|
#define DBG_PERF_PATH_SET(dir, point)
|
|
#define DBG_PERF_FILTER_LEN 1000
|
|
#endif
|
|
|
|
#if ESP_PER_SOC_TCP_WND
|
|
#define TCP_WND(pcb) (pcb->per_soc_tcp_wnd)
|
|
#define TCP_SND_BUF(pcb) (pcb->per_soc_tcp_snd_buf)
|
|
#endif
|
|
|
|
/**
|
|
* DHCP_DEBUG: Enable debugging in dhcp.c.
|
|
*/
|
|
#define DHCP_DEBUG LWIP_DBG_OFF
|
|
#define LWIP_DEBUG LWIP_DBG_OFF
|
|
#define TCP_DEBUG LWIP_DBG_OFF
|
|
#define ESP_STATS 0
|
|
|
|
#define CHECKSUM_CHECK_UDP 0
|
|
#define CHECKSUM_CHECK_IP 0
|
|
|
|
#define LWIP_NETCONN_FULLDUPLEX 1
|
|
#define LWIP_NETCONN_SEM_PER_THREAD 1
|
|
|
|
#define LWIP_DHCP_MAX_NTP_SERVERS CONFIG_LWIP_DHCP_MAX_NTP_SERVERS
|
|
#define LWIP_TIMEVAL_PRIVATE 0
|
|
|
|
#define SNTP_SET_SYSTEM_TIME_US(sec, us) \
|
|
do { \
|
|
struct timeval tv = { .tv_sec = sec, .tv_usec = us }; \
|
|
settimeofday(&tv, NULL); \
|
|
} while (0);
|
|
|
|
#define SNTP_GET_SYSTEM_TIME(sec, us) \
|
|
do { \
|
|
struct timeval tv = { .tv_sec = 0, .tv_usec = 0 }; \
|
|
gettimeofday(&tv, NULL); \
|
|
(sec) = tv.tv_sec; \
|
|
(us) = tv.tv_usec; \
|
|
} while (0);
|
|
|
|
#define SOC_SEND_LOG //printf
|
|
|
|
#endif /* __LWIPOPTS_H__ */
|