1effae46ea
This PR is the initial documentation structure including the basic information about the project and Sphinx configuration. ####CONTENTS: - Getting Started - Installing - Boards - Libraries - Library Builder - Tutorials - ESP-IDF as Component - OTA Web Update - makeEspArduino - Troubleshooting - Contributing This PR also changes the README.md.
93 lines
3.1 KiB
ReStructuredText
93 lines
3.1 KiB
ReStructuredText
##############################
|
|
Arduino as a ESP-IDF component
|
|
##############################
|
|
|
|
ESP32 Arduino lib-builder
|
|
-------------------------
|
|
|
|
For a simplified method, see `lib-builder <lib_builder>`_.
|
|
|
|
Installation
|
|
------------
|
|
|
|
- Download and install `ESP-IDF <https://github.com/espressif/esp-idf>`_.
|
|
- Create blank idf project (from one of the examples).
|
|
- In the project folder, create a new folder called `components` and clone this repository inside the new created folder.
|
|
|
|
.. code-block:: bash
|
|
|
|
mkdir -p components && \
|
|
cd components && \
|
|
git clone https://github.com/espressif/arduino-esp32.git arduino && \
|
|
cd arduino && \
|
|
git submodule update --init --recursive && \
|
|
cd ../.. && \
|
|
idf.py menuconfig
|
|
|
|
|
|
- The `idf.py menuconfig` has some Arduino options.
|
|
- On `Autostart Arduino setup and loop on boot`.
|
|
- If you enable these options, your main.cpp should be formated like any other sketch.
|
|
|
|
.. code-block:: c
|
|
|
|
//file: main.cpp
|
|
#include "Arduino.h"
|
|
|
|
void setup(){
|
|
Serial.begin(115200);
|
|
}
|
|
|
|
void loop(){
|
|
Serial.println("loop");
|
|
delay(1000);
|
|
}
|
|
|
|
- Otherwise, you need to implement ```app_main()``` and call ```initArduino();``` in it.
|
|
|
|
Keep in mind that setup() and loop() will not be called in this case.
|
|
If you plan to base your code on examples provided in `examples <https://github.com/espressif/esp-idf/tree/master/examples>`_, please make sure to move the app_main() function in main.cpp from the files in the example.
|
|
|
|
.. code-block:: cpp
|
|
|
|
//file: main.cpp
|
|
#include "Arduino.h"
|
|
|
|
extern "C" void app_main()
|
|
{
|
|
initArduino();
|
|
pinMode(4, OUTPUT);
|
|
digitalWrite(4, HIGH);
|
|
//do your own thing
|
|
}
|
|
|
|
- "Disable mutex locks for HAL"
|
|
- If enabled, there will be no protection on the drivers from concurently accessing them from another thread/interrupt/core
|
|
- "Autoconnect WiFi on boot"
|
|
- If enabled, WiFi will start with the last known configuration
|
|
- Otherwise it will wait for WiFi.begin
|
|
|
|
- ```idf.py -p <your-board-serial-port> flash monitor``` will build, upload and open serial monitor to your board
|
|
|
|
Logging To Serial
|
|
-----------------
|
|
|
|
If you are writing code that does not require Arduino to compile and you want your `ESP_LOGx` macros to work in Arduino IDE, you can enable the compatibility by adding the following lines after:
|
|
|
|
.. code-block:: c
|
|
|
|
#ifdef ARDUINO_ARCH_ESP32
|
|
#include "esp32-hal-log.h"
|
|
#endif
|
|
|
|
FreeRTOS Tick Rate (Hz)
|
|
-----------------------
|
|
|
|
You might notice that Arduino-esp32's `delay()` function will only work in multiples of 10ms. That is because, by default, esp-idf handles task events 100 times per second.
|
|
To fix that behavior, you need to set FreeRTOS tick rate to 1000Hz in `make menuconfig` -> `Component config` -> `FreeRTOS` -> `Tick rate`.
|
|
|
|
Compilation Errors
|
|
------------------
|
|
|
|
As commits are made to esp-idf and submodules, the codebases can develop incompatibilities which cause compilation errors. If you have problems compiling, follow the instructions in `Issue #1142 <https://github.com/espressif/arduino-esp32/issues/1142>`_ to roll esp-idf back to a different version.
|