arduino-esp32/libraries/USB/examples/Keyboard/KeyboardLogout/KeyboardLogout.ino
Me No Dev c45cff5f83
Implement USB HID Device Support for ESP32-S2 (#5538)
* Add support and example for USB HID Devices
* Add support and example for USB Vendor
2021-08-23 17:27:34 +03:00

93 lines
1.9 KiB
C++

/*
Keyboard logout
This sketch demonstrates the Keyboard library.
When you connect pin 2 to ground, it performs a logout.
It uses keyboard combinations to do this, as follows:
On Windows, CTRL-ALT-DEL followed by ALT-l
On Ubuntu, CTRL-ALT-DEL, and ENTER
On OSX, CMD-SHIFT-q
To wake: Spacebar.
Circuit:
- Arduino Leonardo or Micro
- wire to connect D2 to ground
created 6 Mar 2012
modified 27 Mar 2012
by Tom Igoe
This example is in the public domain.
http://www.arduino.cc/en/Tutorial/KeyboardLogout
*/
#define OSX 0
#define WINDOWS 1
#define UBUNTU 2
#include "USB.h"
#include "USBHIDKeyboard.h"
USBHIDKeyboard Keyboard;
// change this to match your platform:
int platform = OSX;
void setup() {
// make pin 0 an input and turn on the pull-up resistor so it goes high unless
// connected to ground:
pinMode(0, INPUT_PULLUP);
Keyboard.begin();
USB.begin();
}
void loop() {
while (digitalRead(0) == HIGH) {
// do nothing until pin 2 goes low
delay(500);
}
delay(1000);
switch (platform) {
case OSX:
Keyboard.press(KEY_LEFT_GUI);
// Shift-Q logs out:
Keyboard.press(KEY_LEFT_SHIFT);
Keyboard.press('Q');
delay(100);
Keyboard.releaseAll();
// enter:
Keyboard.write(KEY_RETURN);
break;
case WINDOWS:
// CTRL-ALT-DEL:
Keyboard.press(KEY_LEFT_CTRL);
Keyboard.press(KEY_LEFT_ALT);
Keyboard.press(KEY_DELETE);
delay(100);
Keyboard.releaseAll();
// ALT-l:
delay(2000);
Keyboard.press(KEY_LEFT_ALT);
Keyboard.press('l');
Keyboard.releaseAll();
break;
case UBUNTU:
// CTRL-ALT-DEL:
Keyboard.press(KEY_LEFT_CTRL);
Keyboard.press(KEY_LEFT_ALT);
Keyboard.press(KEY_DELETE);
delay(1000);
Keyboard.releaseAll();
// Enter to confirm logout:
Keyboard.write(KEY_RETURN);
break;
}
// do nothing:
while (true) delay(1000);
}