73 lines
1.7 KiB
C++
73 lines
1.7 KiB
C++
/**
|
|
httpUpdate.ino
|
|
|
|
Created on: 27.11.2015
|
|
|
|
*/
|
|
|
|
#include <Arduino.h>
|
|
|
|
#include <WiFi.h>
|
|
#include <WiFiMulti.h>
|
|
|
|
#include <HTTPClient.h>
|
|
#include <HTTPUpdate.h>
|
|
|
|
WiFiMulti WiFiMulti;
|
|
|
|
void setup() {
|
|
|
|
Serial.begin(115200);
|
|
// Serial.setDebugOutput(true);
|
|
|
|
Serial.println();
|
|
Serial.println();
|
|
Serial.println();
|
|
|
|
for (uint8_t t = 4; t > 0; t--) {
|
|
Serial.printf("[SETUP] WAIT %d...\n", t);
|
|
Serial.flush();
|
|
delay(1000);
|
|
}
|
|
|
|
WiFi.mode(WIFI_STA);
|
|
WiFiMulti.addAP("SSID", "PASSWORD");
|
|
|
|
|
|
}
|
|
|
|
void loop() {
|
|
// wait for WiFi connection
|
|
if ((WiFiMulti.run() == WL_CONNECTED)) {
|
|
|
|
WiFiClient client;
|
|
|
|
// The line below is optional. It can be used to blink the LED on the board during flashing
|
|
// The LED will be on during download of one buffer of data from the network. The LED will
|
|
// be off during writing that buffer to flash
|
|
// On a good connection the LED should flash regularly. On a bad connection the LED will be
|
|
// on much longer than it will be off. Other pins than LED_BUILTIN may be used. The second
|
|
// value is used to put the LED on. If the LED is on with HIGH, that value should be passed
|
|
// httpUpdate.setLedPin(LED_BUILTIN, LOW);
|
|
|
|
t_httpUpdate_return ret = httpUpdate.update(client, "http://server/file.bin");
|
|
// Or:
|
|
//t_httpUpdate_return ret = httpUpdate.update(client, "server", 80, "file.bin");
|
|
|
|
switch (ret) {
|
|
case HTTP_UPDATE_FAILED:
|
|
Serial.printf("HTTP_UPDATE_FAILED Error (%d): %s\n", httpUpdate.getLastError(), httpUpdate.getLastErrorString().c_str());
|
|
break;
|
|
|
|
case HTTP_UPDATE_NO_UPDATES:
|
|
Serial.println("HTTP_UPDATE_NO_UPDATES");
|
|
break;
|
|
|
|
case HTTP_UPDATE_OK:
|
|
Serial.println("HTTP_UPDATE_OK");
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|