arduino-esp32/tools/sdk/include/bt/esp_a2dp_api.h
Me No Dev 04963009ee
Update IDF to a0468b2 (#2108)
* Update IDF to a0468b2

* add missing ld file

* Fix PIO builds and change coex policy
2018-11-26 23:22:11 +01:00

343 lines
13 KiB
C

// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __ESP_A2DP_API_H__
#define __ESP_A2DP_API_H__
#include "esp_err.h"
#include "esp_bt_defs.h"
#ifdef __cplusplus
extern "C" {
#endif
/// Media codec types supported by A2DP
#define ESP_A2D_MCT_SBC (0) /*!< SBC */
#define ESP_A2D_MCT_M12 (0x01) /*!< MPEG-1, 2 Audio */
#define ESP_A2D_MCT_M24 (0x02) /*!< MPEG-2, 4 AAC */
#define ESP_A2D_MCT_ATRAC (0x04) /*!< ATRAC family */
#define ESP_A2D_MCT_NON_A2DP (0xff)
typedef uint8_t esp_a2d_mct_t;
/// A2DP media codec capabilities union
typedef struct {
esp_a2d_mct_t type; /*!< A2DP media codec type */
#define ESP_A2D_CIE_LEN_SBC (4)
#define ESP_A2D_CIE_LEN_M12 (4)
#define ESP_A2D_CIE_LEN_M24 (6)
#define ESP_A2D_CIE_LEN_ATRAC (7)
union {
uint8_t sbc[ESP_A2D_CIE_LEN_SBC];
uint8_t m12[ESP_A2D_CIE_LEN_M12];
uint8_t m24[ESP_A2D_CIE_LEN_M24];
uint8_t atrac[ESP_A2D_CIE_LEN_ATRAC];
} cie; /*!< A2DP codec information element */
} __attribute__((packed)) esp_a2d_mcc_t;
/// Bluetooth A2DP connection states
typedef enum {
ESP_A2D_CONNECTION_STATE_DISCONNECTED = 0, /*!< connection released */
ESP_A2D_CONNECTION_STATE_CONNECTING, /*!< connecting remote device */
ESP_A2D_CONNECTION_STATE_CONNECTED, /*!< connection established */
ESP_A2D_CONNECTION_STATE_DISCONNECTING /*!< disconnecting remote device */
} esp_a2d_connection_state_t;
/// Bluetooth A2DP disconnection reason
typedef enum {
ESP_A2D_DISC_RSN_NORMAL = 0, /*!< Finished disconnection that is initiated by local or remote device */
ESP_A2D_DISC_RSN_ABNORMAL /*!< Abnormal disconnection caused by signal loss */
} esp_a2d_disc_rsn_t;
/// Bluetooth A2DP datapath states
typedef enum {
ESP_A2D_AUDIO_STATE_REMOTE_SUSPEND = 0, /*!< audio stream datapath suspended by remote device */
ESP_A2D_AUDIO_STATE_STOPPED, /*!< audio stream datapath stopped */
ESP_A2D_AUDIO_STATE_STARTED, /*!< audio stream datapath started */
} esp_a2d_audio_state_t;
/// A2DP media control command acknowledgement code
typedef enum {
ESP_A2D_MEDIA_CTRL_ACK_SUCCESS = 0, /*!< media control command is acknowledged with success */
ESP_A2D_MEDIA_CTRL_ACK_FAILURE, /*!< media control command is acknowledged with failure */
ESP_A2D_MEDIA_CTRL_ACK_BUSY, /*!< media control command is rejected, as previous command is not yet acknowledged */
} esp_a2d_media_ctrl_ack_t;
/// A2DP media control commands
typedef enum {
ESP_A2D_MEDIA_CTRL_NONE = 0, /*!< dummy command */
ESP_A2D_MEDIA_CTRL_CHECK_SRC_RDY, /*!< check whether AVDTP is connected, only used in A2DP source */
ESP_A2D_MEDIA_CTRL_START, /*!< command to set up media transmission channel */
ESP_A2D_MEDIA_CTRL_STOP, /*!< command to stop media transmission */
ESP_A2D_MEDIA_CTRL_SUSPEND, /*!< command to suspend media transmission */
} esp_a2d_media_ctrl_t;
/// A2DP callback events
typedef enum {
ESP_A2D_CONNECTION_STATE_EVT = 0, /*!< connection state changed event */
ESP_A2D_AUDIO_STATE_EVT, /*!< audio stream transmission state changed event */
ESP_A2D_AUDIO_CFG_EVT, /*!< audio codec is configured, only used for A2DP SINK */
ESP_A2D_MEDIA_CTRL_ACK_EVT, /*!< acknowledge event in response to media control commands */
} esp_a2d_cb_event_t;
/// A2DP state callback parameters
typedef union {
/**
* @brief ESP_A2D_CONNECTION_STATE_EVT
*/
struct a2d_conn_stat_param {
esp_a2d_connection_state_t state; /*!< one of values from esp_a2d_connection_state_t */
esp_bd_addr_t remote_bda; /*!< remote bluetooth device address */
esp_a2d_disc_rsn_t disc_rsn; /*!< reason of disconnection for "DISCONNECTED" */
} conn_stat; /*!< A2DP connection status */
/**
* @brief ESP_A2D_AUDIO_STATE_EVT
*/
struct a2d_audio_stat_param {
esp_a2d_audio_state_t state; /*!< one of the values from esp_a2d_audio_state_t */
esp_bd_addr_t remote_bda; /*!< remote bluetooth device address */
} audio_stat; /*!< audio stream playing state */
/**
* @brief ESP_A2D_AUDIO_CFG_EVT
*/
struct a2d_audio_cfg_param {
esp_bd_addr_t remote_bda; /*!< remote bluetooth device address */
esp_a2d_mcc_t mcc; /*!< A2DP media codec capability information */
} audio_cfg; /*!< media codec configuration information */
/**
* @brief ESP_A2D_MEDIA_CTRL_ACK_EVT
*/
struct media_ctrl_stat_param {
esp_a2d_media_ctrl_t cmd; /*!< media control commands to acknowledge */
esp_a2d_media_ctrl_ack_t status; /*!< acknowledgement to media control commands */
} media_ctrl_stat; /*!< status in acknowledgement to media control commands */
} esp_a2d_cb_param_t;
/**
* @brief A2DP profile callback function type
*
* @param event : Event type
*
* @param param : Pointer to callback parameter
*/
typedef void (* esp_a2d_cb_t)(esp_a2d_cb_event_t event, esp_a2d_cb_param_t *param);
/**
* @brief A2DP profile data callback function
* @param[in] buf : data received from A2DP source device and is PCM format decoder from SBC decoder;
* buf references to a static memory block and can be overwritten by upcoming data
* @param[in] len : size(in bytes) in buf
*/
typedef void (* esp_a2d_sink_data_cb_t)(const uint8_t *buf, uint32_t len);
/**
* @brief A2DP source data read callback function
*
* @param[in] buf : buffer to be filled with PCM data stream from higher layer
*
* @param[in] len : size(in bytes) of data block to be copied to buf. -1 is an indication to user
* that data buffer shall be flushed
*
* @return size of bytes read successfully, if the argument len is -1, this value is ignored.
*
*/
typedef int32_t (* esp_a2d_source_data_cb_t)(uint8_t *buf, int32_t len);
/**
* @brief Register application callback function to A2DP module. This function should be called
* only after esp_bluedroid_enable() completes successfully, used by both A2DP source
* and sink.
*
* @param[in] callback: A2DP event callback function
*
* @return
* - ESP_OK: success
* - ESP_INVALID_STATE: if bluetooth stack is not yet enabled
* - ESP_FAIL: if callback is a NULL function pointer
*
*/
esp_err_t esp_a2d_register_callback(esp_a2d_cb_t callback);
/**
* @brief Register A2DP sink data output function; For now the output is PCM data stream decoded
* from SBC format. This function should be called only after esp_bluedroid_enable()
* completes successfully, used only by A2DP sink. The callback is invoked in the context
* of A2DP sink task whose stack size is configurable through menuconfig
*
* @param[in] callback: A2DP sink data callback function
*
* @return
* - ESP_OK: success
* - ESP_INVALID_STATE: if bluetooth stack is not yet enabled
* - ESP_FAIL: if callback is a NULL function pointer
*
*/
esp_err_t esp_a2d_sink_register_data_callback(esp_a2d_sink_data_cb_t callback);
/**
*
* @brief Initialize the bluetooth A2DP sink module. This function should be called
* after esp_bluedroid_enable() completes successfully
*
* @return
* - ESP_OK: if the initialization request is sent successfully
* - ESP_INVALID_STATE: if bluetooth stack is not yet enabled
* - ESP_FAIL: others
*
*/
esp_err_t esp_a2d_sink_init(void);
/**
*
* @brief De-initialize for A2DP sink module. This function
* should be called only after esp_bluedroid_enable() completes successfully
*
* @return
* - ESP_OK: success
* - ESP_INVALID_STATE: if bluetooth stack is not yet enabled
* - ESP_FAIL: others
*
*/
esp_err_t esp_a2d_sink_deinit(void);
/**
*
* @brief Connect to remote bluetooth A2DP source device, must after esp_a2d_sink_init()
*
* @param[in] remote_bda: remote bluetooth device address
*
* @return
* - ESP_OK: connect request is sent to lower layer
* - ESP_INVALID_STATE: if bluetooth stack is not yet enabled
* - ESP_FAIL: others
*
*/
esp_err_t esp_a2d_sink_connect(esp_bd_addr_t remote_bda);
/**
*
* @brief Disconnect from the remote A2DP source device
*
* @param[in] remote_bda: remote bluetooth device address
* @return
* - ESP_OK: disconnect request is sent to lower layer
* - ESP_INVALID_STATE: if bluetooth stack is not yet enabled
* - ESP_FAIL: others
*
*/
esp_err_t esp_a2d_sink_disconnect(esp_bd_addr_t remote_bda);
/**
*
* @brief media control commands; this API can be used for both A2DP sink and source
*
* @param[in] ctrl: control commands for A2DP data channel
* @return
* - ESP_OK: control command is sent to lower layer
* - ESP_INVALID_STATE: if bluetooth stack is not yet enabled
* - ESP_FAIL: others
*
*/
esp_err_t esp_a2d_media_ctrl(esp_a2d_media_ctrl_t ctrl);
/**
*
* @brief Initialize the bluetooth A2DP source module. This function should be called
* after esp_bluedroid_enable() completes successfully
*
* @return
* - ESP_OK: if the initialization request is sent successfully
* - ESP_INVALID_STATE: if bluetooth stack is not yet enabled
* - ESP_FAIL: others
*
*/
esp_err_t esp_a2d_source_init(void);
/**
*
* @brief De-initialize for A2DP source module. This function
* should be called only after esp_bluedroid_enable() completes successfully
*
* @return
* - ESP_OK: success
* - ESP_INVALID_STATE: if bluetooth stack is not yet enabled
* - ESP_FAIL: others
*
*/
esp_err_t esp_a2d_source_deinit(void);
/**
* @brief Register A2DP source data input function; For now the input is PCM data stream.
* This function should be called only after esp_bluedroid_enable() completes
* successfully. The callback is invoked in the context of A2DP source task whose
* stack size is configurable through menuconfig
*
* @param[in] callback: A2DP source data callback function
*
* @return
* - ESP_OK: success
* - ESP_INVALID_STATE: if bluetooth stack is not yet enabled
* - ESP_FAIL: if callback is a NULL function pointer
*
*/
esp_err_t esp_a2d_source_register_data_callback(esp_a2d_source_data_cb_t callback);
/**
*
* @brief Connect to remote A2DP sink device, must after esp_a2d_source_init()
*
* @param[in] remote_bda: remote bluetooth device address
*
* @return
* - ESP_OK: connect request is sent to lower layer
* - ESP_INVALID_STATE: if bluetooth stack is not yet enabled
* - ESP_FAIL: others
*
*/
esp_err_t esp_a2d_source_connect(esp_bd_addr_t remote_bda);
/**
*
* @brief Disconnect from the remote A2DP sink device
*
* @param[in] remote_bda: remote bluetooth device address
* @return
* - ESP_OK: disconnect request is sent to lower layer
* - ESP_INVALID_STATE: if bluetooth stack is not yet enabled
* - ESP_FAIL: others
*
*/
esp_err_t esp_a2d_source_disconnect(esp_bd_addr_t remote_bda);
#ifdef __cplusplus
}
#endif
#endif /* __ESP_A2DP_API_H__ */