arduino-esp32/libraries/WiFi/examples/ETH_TLK110/ETH_TLK110.ino
Craig Leres c92b617397 Convert the few remaining cr/lf files to use lf for eol. (#1316)
If you develop on windows and need cr/lf files, see this:

    https://git-scm.com/book/en/v2/Customizing-Git-Git-Configuration#_formatting_and_whitespace

    Git can handle this by auto-converting CRLF line endings into LF
    when you add a file to the index, and vice versa when it checks out
    code onto your filesystem. You can turn on this functionality with
    the core.autocrlf setting. If you're on a Windows machine, set it
    to true - this converts LF endings into CRLF when you check out code:

    $ git config --global core.autocrlf true
2018-04-16 16:34:39 +02:00

88 lines
1.9 KiB
C++

/*
This sketch shows the Ethernet event usage
*/
#include <ETH.h>
#define ETH_ADDR 31
#define ETH_POWER_PIN 17
#define ETH_MDC_PIN 23
#define ETH_MDIO_PIN 18
#define ETH_TYPE ETH_PHY_TLK110
static bool eth_connected = false;
void WiFiEvent(WiFiEvent_t event)
{
switch (event) {
case SYSTEM_EVENT_ETH_START:
Serial.println("ETH Started");
//set eth hostname here
ETH.setHostname("esp32-ethernet");
break;
case SYSTEM_EVENT_ETH_CONNECTED:
Serial.println("ETH Connected");
break;
case SYSTEM_EVENT_ETH_GOT_IP:
Serial.print("ETH MAC: ");
Serial.print(ETH.macAddress());
Serial.print(", IPv4: ");
Serial.print(ETH.localIP());
if (ETH.fullDuplex()) {
Serial.print(", FULL_DUPLEX");
}
Serial.print(", ");
Serial.print(ETH.linkSpeed());
Serial.println("Mbps");
eth_connected = true;
break;
case SYSTEM_EVENT_ETH_DISCONNECTED:
Serial.println("ETH Disconnected");
eth_connected = false;
break;
case SYSTEM_EVENT_ETH_STOP:
Serial.println("ETH Stopped");
eth_connected = false;
break;
default:
break;
}
}
void testClient(const char * host, uint16_t port)
{
Serial.print("\nconnecting to ");
Serial.println(host);
WiFiClient client;
if (!client.connect(host, port)) {
Serial.println("connection failed");
return;
}
client.printf("GET / HTTP/1.1\r\nHost: %s\r\n\r\n", host);
while (client.connected() && !client.available());
while (client.available()) {
Serial.write(client.read());
}
Serial.println("closing connection\n");
client.stop();
}
void setup()
{
Serial.begin(115200);
WiFi.onEvent(WiFiEvent);
ETH.begin(ETH_ADDR, ETH_POWER_PIN, ETH_MDC_PIN, ETH_MDIO_PIN, ETH_TYPE);
}
void loop()
{
if (eth_connected) {
testClient("google.com", 80);
}
delay(10000);
}