arduino-esp32/tools/sdk/include/lwip/apps/sntp/sntp_opts.h
2016-10-06 07:09:44 -06:00

160 lines
5.6 KiB
C

/*
* Copyright (c) 2007-2009 Frédéric Bernon, Simon Goldschmidt
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
* Author: Frédéric Bernon, Simon Goldschmidt
*
*/
#ifndef LWIP_HDR_APPS_SNTP_OPTS_H
#define LWIP_HDR_APPS_SNTP_OPTS_H
#include "lwip/opt.h"
/** SNTP macro to change system time in seconds
* Define SNTP_SET_SYSTEM_TIME_US(sec, us) to set the time in microseconds instead of this one
* if you need the additional precision.
*/
#ifndef SNTP_SET_SYSTEM_TIME
#define SNTP_SET_SYSTEM_TIME(sec) LWIP_UNUSED_ARG(sec)
#endif
/** The maximum number of SNTP servers that can be set */
#ifndef SNTP_MAX_SERVERS
#define SNTP_MAX_SERVERS LWIP_DHCP_MAX_NTP_SERVERS
#endif
/** Set this to 1 to implement the callback function called by dhcp when
* NTP servers are received. */
#ifndef SNTP_GET_SERVERS_FROM_DHCP
#define SNTP_GET_SERVERS_FROM_DHCP LWIP_DHCP_GET_NTP_SRV
#endif
/* Set this to 1 to support DNS names (or IP address strings) to set sntp servers */
#ifndef SNTP_SERVER_DNS
#define SNTP_SERVER_DNS 1
#endif
/** One server address/name can be defined as default if SNTP_SERVER_DNS == 1:
* #define SNTP_SERVER_ADDRESS "pool.ntp.org"
*/
/**
* SNTP_DEBUG: Enable debugging for SNTP.
*/
#ifndef SNTP_DEBUG
#define SNTP_DEBUG LWIP_DBG_OFF
#endif
/** SNTP server port */
#ifndef SNTP_PORT
#define SNTP_PORT 123
#endif
/** Set this to 1 to allow config of SNTP server(s) by DNS name */
#ifndef SNTP_SERVER_DNS
#define SNTP_SERVER_DNS 0
#endif
/** Sanity check:
* Define this to
* - 0 to turn off sanity checks (default; smaller code)
* - >= 1 to check address and port of the response packet to ensure the
* response comes from the server we sent the request to.
* - >= 2 to check returned Originate Timestamp against Transmit Timestamp
* sent to the server (to ensure response to older request).
* - >= 3 @todo: discard reply if any of the LI, Stratum, or Transmit Timestamp
* fields is 0 or the Mode field is not 4 (unicast) or 5 (broadcast).
* - >= 4 @todo: to check that the Root Delay and Root Dispersion fields are each
* greater than or equal to 0 and less than infinity, where infinity is
* currently a cozy number like one second. This check avoids using a
* server whose synchronization source has expired for a very long time.
*/
#ifndef SNTP_CHECK_RESPONSE
#define SNTP_CHECK_RESPONSE 0
#endif
/** According to the RFC, this shall be a random delay
* between 1 and 5 minutes (in milliseconds) to prevent load peaks.
* This can be defined to a random generation function,
* which must return the delay in milliseconds as u32_t.
* Turned off by default.
*/
#ifndef SNTP_STARTUP_DELAY
#define SNTP_STARTUP_DELAY 0
#endif
/** If you want the startup delay to be a function, define this
* to a function (including the brackets) and define SNTP_STARTUP_DELAY to 1.
*/
#ifndef SNTP_STARTUP_DELAY_FUNC
#define SNTP_STARTUP_DELAY_FUNC SNTP_STARTUP_DELAY
#endif
/** SNTP receive timeout - in milliseconds
* Also used as retry timeout - this shouldn't be too low.
* Default is 3 seconds.
*/
#ifndef SNTP_RECV_TIMEOUT
#define SNTP_RECV_TIMEOUT 3000
#endif
/** SNTP update delay - in milliseconds
* Default is 1 hour. Must not be beolw 15 seconds by specification (i.e. 15000)
*/
#ifndef SNTP_UPDATE_DELAY
#define SNTP_UPDATE_DELAY 3600000
#endif
/** SNTP macro to get system time, used with SNTP_CHECK_RESPONSE >= 2
* to send in request and compare in response.
*/
#ifndef SNTP_GET_SYSTEM_TIME
#define SNTP_GET_SYSTEM_TIME(sec, us) do { (sec) = 0; (us) = 0; } while(0)
#endif
/** Default retry timeout (in milliseconds) if the response
* received is invalid.
* This is doubled with each retry until SNTP_RETRY_TIMEOUT_MAX is reached.
*/
#ifndef SNTP_RETRY_TIMEOUT
#define SNTP_RETRY_TIMEOUT SNTP_RECV_TIMEOUT
#endif
/** Maximum retry timeout (in milliseconds). */
#ifndef SNTP_RETRY_TIMEOUT_MAX
#define SNTP_RETRY_TIMEOUT_MAX (SNTP_RETRY_TIMEOUT * 10)
#endif
/** Increase retry timeout with every retry sent
* Default is on to conform to RFC.
*/
#ifndef SNTP_RETRY_TIMEOUT_EXP
#define SNTP_RETRY_TIMEOUT_EXP 1
#endif
#endif /* LWIP_HDR_APPS_SNTP_OPTS_H */