106 lines
4.4 KiB
C
Executable File
106 lines
4.4 KiB
C
Executable File
/*******************************************************************************
|
|
|
|
Copyright (c) 2009-2010 by Tensilica Inc. ALL RIGHTS RESERVED.
|
|
These coded instructions, statements, and computer programs are the
|
|
copyrighted works and confidential proprietary information of Tensilica Inc.
|
|
They may not be modified, copied, reproduced, distributed, or disclosed to
|
|
third parties in any manner, medium, or form, in whole or in part, without
|
|
the prior written consent of Tensilica Inc.
|
|
--------------------------------------------------------------------------------
|
|
|
|
lcd-SPLC780D-4bitmode.h Generic definitions for Sunplus SPLC780D LCD Controller
|
|
operating in 4 bit mode.
|
|
|
|
This is used by board-support-packages with one or more LCD displays that use
|
|
a SPLC780D controller in 4 bit mode. A BSP provides a base address for each
|
|
instance of an SPLC780D LCD controller on the board.
|
|
|
|
Note that LCD display operation is almost totally independent of the LCD
|
|
display, depending almost entirely on the controller. However the display
|
|
may limit the number of characters of the controller's RAM buffer that are
|
|
actually visible at one time. The length of the display's visible window
|
|
is not specifified in this controller-specific header, but comes to the
|
|
driver from the board-specific "display.h" header.
|
|
|
|
*******************************************************************************/
|
|
|
|
#ifndef _LCD_SPLC780D_4BIT_H_
|
|
#define _LCD_SPLC780D_4BIT_H_
|
|
|
|
|
|
/* Offsets to controller registers from base. */
|
|
#define SPLC780D_4BIT_INST 0
|
|
#define SPLC780D_4BIT_DATA (SPLC780D_4BIT_INST + SPLC780D_4BIT_REGSPACING)
|
|
|
|
|
|
#define SPLC780D_4BIT_INST_INIT1 0xFF /* First command in
|
|
init sequence */
|
|
#define SPLC780D_4BIT_INST_INIT2 0x30 /* Second command in
|
|
init sequence,
|
|
issued 3 times */
|
|
#define SPLC780D_4BIT_INST_INIT3 0x20 /* Third and last command
|
|
in init sequence */
|
|
#define SPLC780D_4BIT_INST_CLEAR 0x01 /* clear (blank) display) */
|
|
#define SPLC780D_4BIT_INST_SET_MODE 0x28 /* Set LCD mode. Supported
|
|
setting is 4 bit data
|
|
length, 2 lines, 5*8 */
|
|
#define SPLC780D_4BIT_INST_DSPLY_ON 0x0C /* Set Display ON */
|
|
#define SPLC780D_4BIT_INST_CRSR_INC 0x06 /* Set cursor moving direction
|
|
as increment */
|
|
|
|
#define SPLC780D_4BIT_LINET_ADDR 0x80 /* clear (blank) display) */
|
|
#define SPLC780D_4BIT_LINEB_ADDR 0xC0 /* clear (blank) display) */
|
|
|
|
#ifndef __ASSEMBLER__
|
|
|
|
/* C interface to controller registers. */
|
|
struct splc780d_4bit_s {
|
|
splc780d_4bit_reg_t inst; /* instruction register */
|
|
splc780d_4bit_reg_t data; /* data register */
|
|
};
|
|
|
|
typedef volatile struct splc780d_4bit_s splc780d_4bit_t;
|
|
|
|
/*
|
|
Prototypes of high level driver functions.
|
|
*/
|
|
|
|
/* Write an instruction byte to LCD, result in two back to back writes since the
|
|
* LCD is hooked up in 4 bit mode*/
|
|
extern void lcd_write_inst_byte(splc780d_4bit_t *lcd, unsigned char inst);
|
|
|
|
/* Write a data byte to LCD, result in two back to back writes since the
|
|
* LCD is hooked up in 4 bit mode*/
|
|
extern void lcd_write_data_byte(splc780d_4bit_t *lcd, unsigned char data);
|
|
|
|
/*
|
|
Initialize the display with default settings.
|
|
*/
|
|
extern void splc780d_4bit_init_default(splc780d_4bit_t *lcd);
|
|
|
|
/*
|
|
Write a single character at a given position (chars from left, starting at 0).
|
|
Wait long enough afterward for the controller to be ready for more input.
|
|
Positions beyond the end of the display are ignored.
|
|
*/
|
|
extern void splc780d_4bit_write_char(splc780d_4bit_t *lcd, unsigned pos, const char c);
|
|
|
|
/*
|
|
Write a string to the display starting at the left (position 0).
|
|
Blank-pad to or truncate at the end of the display (overwrites any previous
|
|
string so don't need to blank the display first).
|
|
Wait long enough after each char for the controller to be ready for more input.
|
|
*/
|
|
extern void splc780d_4bit_write_string(splc780d_4bit_t *lcd, const char *s);
|
|
|
|
/*
|
|
Blank (clear) the entire display.
|
|
Wait long enough afterward for the controller to be ready for more input.
|
|
*/
|
|
extern void splc780d_4bit_blank(splc780d_4bit_t *lcd);
|
|
|
|
#endif /* __ASSEMBLER__ */
|
|
|
|
#endif /* _LCD_SPLC780D_4BIT_H_ */
|
|
|