arduino-esp32/tools/sdk/include/lwip/netif/slipif.h
Me No Dev 96822d783f
Update IDF to 3.2-3276a13 and esptool.py to 2.5.0 (#1878)
* TX Flow Control and Code cleanup

* Use semaphore instead of delay

TX functionality is done.

* Use single buffer and empty queue on exit

* Fix compile issues because of LwIP code relocation

* Add temporary header to fix Azure not compiling

* Fix AsyncUDP early init

* AsyncUDP Multicast fixes

* Add source mac address and rework multicast

* Allow redefinition of default pins for Serials 1 and 2

* Update IDF to 3276a13

* Update esptool.py to 2.5.0

* Fix sketches

* Fix log level in BluetoothSetial
2018-09-21 08:39:36 +02:00

88 lines
3.0 KiB
C

/**
* @file
*
* SLIP netif API
*/
/*
* Copyright (c) 2001, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
* Author: Adam Dunkels <adam@sics.se>
*
*/
#ifndef LWIP_HDR_NETIF_SLIPIF_H
#define LWIP_HDR_NETIF_SLIPIF_H
#include "lwip/opt.h"
#include "lwip/netif.h"
/** Set this to 1 to start a thread that blocks reading on the serial line
* (using sio_read()).
*/
#ifndef SLIP_USE_RX_THREAD
#define SLIP_USE_RX_THREAD !NO_SYS
#endif
/** Set this to 1 to enable functions to pass in RX bytes from ISR context.
* If enabled, slipif_received_byte[s]() process incoming bytes and put assembled
* packets on a queue, which is fed into lwIP from slipif_poll().
* If disabled, slipif_poll() polls the serial line (using sio_tryread()).
*/
#ifndef SLIP_RX_FROM_ISR
#define SLIP_RX_FROM_ISR 0
#endif
/** Set this to 1 (default for SLIP_RX_FROM_ISR) to queue incoming packets
* received by slipif_received_byte[s]() as long as PBUF_POOL pbufs are available.
* If disabled, packets will be dropped if more than one packet is received.
*/
#ifndef SLIP_RX_QUEUE
#define SLIP_RX_QUEUE SLIP_RX_FROM_ISR
#endif
#ifdef __cplusplus
extern "C" {
#endif
err_t slipif_init(struct netif * netif);
void slipif_poll(struct netif *netif);
#if SLIP_RX_FROM_ISR
void slipif_process_rxqueue(struct netif *netif);
void slipif_received_byte(struct netif *netif, u8_t data);
void slipif_received_bytes(struct netif *netif, u8_t *data, u8_t len);
#endif /* SLIP_RX_FROM_ISR */
#ifdef __cplusplus
}
#endif
#endif /* LWIP_HDR_NETIF_SLIPIF_H */