309 lines
9.1 KiB
C
309 lines
9.1 KiB
C
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
#ifndef __ESP_ETH_H__
|
|
#define __ESP_ETH_H__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#include "esp_types.h"
|
|
#include "esp_err.h"
|
|
|
|
/**
|
|
* @brief Ethernet interface mode
|
|
*
|
|
*/
|
|
typedef enum {
|
|
ETH_MODE_RMII = 0, /*!< RMII mode */
|
|
ETH_MODE_MII, /*!< MII mode */
|
|
} eth_mode_t;
|
|
|
|
/**
|
|
* @brief Ethernet clock mode
|
|
*
|
|
*/
|
|
typedef enum {
|
|
ETH_CLOCK_GPIO0_IN = 0, /*!< RMII clock input to GPIO0 */
|
|
ETH_CLOCK_GPIO0_OUT = 1, /*!< RMII clock output from GPIO0 */
|
|
ETH_CLOCK_GPIO16_OUT = 2, /*!< RMII clock output from GPIO16 */
|
|
ETH_CLOCK_GPIO17_OUT = 3 /*!< RMII clock output from GPIO17 */
|
|
} eth_clock_mode_t;
|
|
|
|
/**
|
|
* @brief Ethernet Speed
|
|
*
|
|
*/
|
|
typedef enum {
|
|
ETH_SPEED_MODE_10M = 0, /*!< Ethernet speed: 10Mbps */
|
|
ETH_SPEED_MODE_100M, /*!< Ethernet speed: 100Mbps */
|
|
} eth_speed_mode_t;
|
|
|
|
/**
|
|
* @brief Ethernet Duplex
|
|
*
|
|
*/
|
|
typedef enum {
|
|
ETH_MODE_HALFDUPLEX = 0, /*!< Ethernet half duplex */
|
|
ETH_MODE_FULLDUPLEX, /*!< Ethernet full duplex */
|
|
} eth_duplex_mode_t;
|
|
|
|
/**
|
|
* @brief Ethernet PHY address
|
|
*
|
|
*/
|
|
typedef enum {
|
|
PHY0 = 0, /*!< PHY address 0 */
|
|
PHY1, /*!< PHY address 1 */
|
|
PHY2, /*!< PHY address 2 */
|
|
PHY3, /*!< PHY address 3 */
|
|
PHY4, /*!< PHY address 4 */
|
|
PHY5, /*!< PHY address 5 */
|
|
PHY6, /*!< PHY address 6 */
|
|
PHY7, /*!< PHY address 7 */
|
|
PHY8, /*!< PHY address 8 */
|
|
PHY9, /*!< PHY address 9 */
|
|
PHY10, /*!< PHY address 10 */
|
|
PHY11, /*!< PHY address 11 */
|
|
PHY12, /*!< PHY address 12 */
|
|
PHY13, /*!< PHY address 13 */
|
|
PHY14, /*!< PHY address 14 */
|
|
PHY15, /*!< PHY address 15 */
|
|
PHY16, /*!< PHY address 16 */
|
|
PHY17, /*!< PHY address 17 */
|
|
PHY18, /*!< PHY address 18 */
|
|
PHY19, /*!< PHY address 19 */
|
|
PHY20, /*!< PHY address 20 */
|
|
PHY21, /*!< PHY address 21 */
|
|
PHY22, /*!< PHY address 22 */
|
|
PHY23, /*!< PHY address 23 */
|
|
PHY24, /*!< PHY address 24 */
|
|
PHY25, /*!< PHY address 25 */
|
|
PHY26, /*!< PHY address 26 */
|
|
PHY27, /*!< PHY address 27 */
|
|
PHY28, /*!< PHY address 28 */
|
|
PHY29, /*!< PHY address 29 */
|
|
PHY30, /*!< PHY address 30 */
|
|
PHY31 /*!< PHY address 31 */
|
|
} eth_phy_base_t;
|
|
|
|
typedef bool (*eth_phy_check_link_func)(void);
|
|
typedef void (*eth_phy_check_init_func)(void);
|
|
typedef eth_speed_mode_t (*eth_phy_get_speed_mode_func)(void);
|
|
typedef eth_duplex_mode_t (*eth_phy_get_duplex_mode_func)(void);
|
|
typedef esp_err_t (*eth_phy_func)(void);
|
|
typedef esp_err_t (*eth_tcpip_input_func)(void *buffer, uint16_t len, void *eb);
|
|
typedef void (*eth_gpio_config_func)(void);
|
|
typedef bool (*eth_phy_get_partner_pause_enable_func)(void);
|
|
typedef void (*eth_phy_power_enable_func)(bool enable);
|
|
|
|
/**
|
|
* @brief ethernet configuration
|
|
*
|
|
*/
|
|
typedef struct {
|
|
eth_phy_base_t phy_addr; /*!< PHY address (0~31) */
|
|
eth_mode_t mac_mode; /*!< MAC mode: only support RMII now */
|
|
eth_clock_mode_t clock_mode; /*!< external/internal clock mode selection */
|
|
eth_tcpip_input_func tcpip_input; /*!< tcpip input func */
|
|
eth_phy_func phy_init; /*!< phy init func */
|
|
eth_phy_check_link_func phy_check_link; /*!< phy check link func */
|
|
eth_phy_check_init_func phy_check_init; /*!< phy check init func */
|
|
eth_phy_get_speed_mode_func phy_get_speed_mode; /*!< phy check init func */
|
|
eth_phy_get_duplex_mode_func phy_get_duplex_mode; /*!< phy check init func */
|
|
eth_gpio_config_func gpio_config; /*!< gpio config func */
|
|
bool flow_ctrl_enable; /*!< flag of flow ctrl enable */
|
|
eth_phy_get_partner_pause_enable_func phy_get_partner_pause_enable; /*!< get partner pause enable */
|
|
eth_phy_power_enable_func phy_power_enable; /*!< enable or disable phy power */
|
|
uint32_t reset_timeout_ms; /*!< timeout value for reset emac */
|
|
bool promiscuous_enable; /*!< set true to enable promiscuous mode */
|
|
} eth_config_t;
|
|
|
|
/**
|
|
* @brief Init ethernet mac
|
|
*
|
|
* @note config can not be NULL, and phy chip must be suitable to phy init func.
|
|
*
|
|
* @param[in] config mac init data.
|
|
*
|
|
* @return
|
|
* - ESP_OK
|
|
* - ESP_FAIL
|
|
*/
|
|
esp_err_t esp_eth_init(eth_config_t *config);
|
|
|
|
/**
|
|
* @brief Deinit ethernet mac
|
|
*
|
|
* @return
|
|
* - ESP_OK
|
|
* - ESP_FAIL
|
|
* - ESP_ERR_INVALID_STATE
|
|
*/
|
|
esp_err_t esp_eth_deinit(void);
|
|
|
|
/**
|
|
* @brief Init Ethernet mac driver only
|
|
*
|
|
* For the most part, you need not call this function directly. It gets called
|
|
* from esp_eth_init().
|
|
*
|
|
* This function may be called, if you only need to initialize the Ethernet
|
|
* driver without having to use the network stack on top.
|
|
*
|
|
* @note config can not be NULL, and phy chip must be suitable to phy init func.
|
|
* @param[in] config mac init data.
|
|
*
|
|
* @return
|
|
* - ESP_OK
|
|
* - ESP_FAIL
|
|
*/
|
|
esp_err_t esp_eth_init_internal(eth_config_t *config);
|
|
|
|
/**
|
|
* @brief Send packet from tcp/ip to mac
|
|
*
|
|
* @note buf can not be NULL, size must be less than 1580
|
|
*
|
|
* @param[in] buf: start address of packet data.
|
|
*
|
|
* @param[in] size: size (byte) of packet data.
|
|
*
|
|
* @return
|
|
* - ESP_OK
|
|
* - ESP_FAIL
|
|
*/
|
|
esp_err_t esp_eth_tx(uint8_t *buf, uint16_t size);
|
|
|
|
/**
|
|
* @brief Enable ethernet interface
|
|
*
|
|
* @note Should be called after esp_eth_init
|
|
*
|
|
* @return
|
|
* - ESP_OK
|
|
* - ESP_FAIL
|
|
*/
|
|
esp_err_t esp_eth_enable(void);
|
|
|
|
/**
|
|
* @brief Disable ethernet interface
|
|
*
|
|
* @note Should be called after esp_eth_init
|
|
*
|
|
* @return
|
|
* - ESP_OK
|
|
* - ESP_FAIL
|
|
*/
|
|
esp_err_t esp_eth_disable(void);
|
|
|
|
/**
|
|
* @brief Get mac addr
|
|
*
|
|
* @note mac addr must be a valid unicast address
|
|
*
|
|
* @param[out] mac: start address of mac address.
|
|
*/
|
|
void esp_eth_get_mac(uint8_t mac[6]);
|
|
|
|
/**
|
|
* @brief Write PHY reg with SMI interface.
|
|
*
|
|
* @note PHY base addr must be right.
|
|
*
|
|
* @param[in] reg_num: PHY reg num.
|
|
*
|
|
* @param[in] value: value which is written to PHY reg.
|
|
*/
|
|
void esp_eth_smi_write(uint32_t reg_num, uint16_t value);
|
|
|
|
/**
|
|
* @brief Read PHY reg with SMI interface.
|
|
*
|
|
* @note PHY base addr must be right.
|
|
*
|
|
* @param[in] reg_num: PHY reg num.
|
|
*
|
|
* @return value that is read from PHY reg
|
|
*/
|
|
uint16_t esp_eth_smi_read(uint32_t reg_num);
|
|
|
|
/**
|
|
* @brief Continuously read a PHY register over SMI interface, wait until the register has the desired value.
|
|
*
|
|
* @note PHY base address must be right.
|
|
*
|
|
* @param reg_num: PHY register number
|
|
* @param value: Value to wait for (masked with value_mask)
|
|
* @param value_mask: Mask of bits to match in the register.
|
|
* @param timeout_ms: Timeout to wait for this value (milliseconds). 0 means never timeout.
|
|
*
|
|
* @return ESP_OK if desired value matches, ESP_ERR_TIMEOUT if timed out.
|
|
*/
|
|
esp_err_t esp_eth_smi_wait_value(uint32_t reg_num, uint16_t value, uint16_t value_mask, int timeout_ms);
|
|
|
|
/**
|
|
* @brief Continuously read a PHY register over SMI interface, wait until the register has all bits in a mask set.
|
|
*
|
|
* @note PHY base address must be right.
|
|
*
|
|
* @param reg_num: PHY register number
|
|
* @param value_mask: Value mask to wait for (all bits in this mask must be set)
|
|
* @param timeout_ms: Timeout to wait for this value (milliseconds). 0 means never timeout.
|
|
*
|
|
* @return ESP_OK if desired value matches, ESP_ERR_TIMEOUT if timed out.
|
|
*/
|
|
static inline esp_err_t esp_eth_smi_wait_set(uint32_t reg_num, uint16_t value_mask, int timeout_ms)
|
|
{
|
|
return esp_eth_smi_wait_value(reg_num, value_mask, value_mask, timeout_ms);
|
|
}
|
|
|
|
/**
|
|
* @brief Free emac rx buf.
|
|
*
|
|
* @note buf can not be null, and it is tcpip input buf.
|
|
*
|
|
* @param[in] buf: start address of received packet data.
|
|
*
|
|
*/
|
|
void esp_eth_free_rx_buf(void *buf);
|
|
|
|
/**
|
|
* @brief Set mac of ethernet interface.
|
|
*
|
|
* @note user can call this function after emac_init, and the new mac address will be enabled after emac_enable.
|
|
*
|
|
* @param[in] mac: the Mac address.
|
|
*
|
|
* @return
|
|
* - ESP_OK: succeed
|
|
* - ESP_ERR_INVALID_MAC: invalid mac address
|
|
*/
|
|
esp_err_t esp_eth_set_mac(const uint8_t mac[6]);
|
|
|
|
/**
|
|
* @brief Get Ethernet link speed
|
|
*
|
|
* @return eth_speed_mode_t ETH_SPEED_MODE_10M when link speed is 10Mbps
|
|
* ETH_SPEED_MODE_100M when link speed is 100Mbps
|
|
*/
|
|
eth_speed_mode_t esp_eth_get_speed(void);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif
|