arduino-esp32/tools/sdk/include/esp32/esp_clk.h
Me No Dev 96822d783f
Update IDF to 3.2-3276a13 and esptool.py to 2.5.0 (#1878)
* TX Flow Control and Code cleanup

* Use semaphore instead of delay

TX functionality is done.

* Use single buffer and empty queue on exit

* Fix compile issues because of LwIP code relocation

* Add temporary header to fix Azure not compiling

* Fix AsyncUDP early init

* AsyncUDP Multicast fixes

* Add source mac address and rework multicast

* Allow redefinition of default pins for Serials 1 and 2

* Update IDF to 3276a13

* Update esptool.py to 2.5.0

* Fix sketches

* Fix log level in BluetoothSetial
2018-09-21 08:39:36 +02:00

87 lines
2.7 KiB
C

// Copyright 2015-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
/**
* @file esp_clk.h
*
* This file contains declarations of clock related functions.
*/
/**
* @brief Get the calibration value of RTC slow clock
*
* The value is in the same format as returned by rtc_clk_cal (microseconds,
* in Q13.19 fixed-point format).
*
* @return the calibration value obtained using rtc_clk_cal, at startup time
*/
uint32_t esp_clk_slowclk_cal_get();
/**
* @brief Update the calibration value of RTC slow clock
*
* The value has to be in the same format as returned by rtc_clk_cal (microseconds,
* in Q13.19 fixed-point format).
* This value is used by timekeeping functions (such as gettimeofday) to
* calculate current time based on RTC counter value.
* @param value calibration value obtained using rtc_clk_cal
*/
void esp_clk_slowclk_cal_set(uint32_t value);
/**
* @brief Return current CPU clock frequency
* When frequency switching is performed, this frequency may change.
* However it is guaranteed that the frequency never changes with a critical
* section.
*
* @return CPU clock frequency, in Hz
*/
int esp_clk_cpu_freq(void);
/**
* @brief Return current APB clock frequency
*
* When frequency switching is performed, this frequency may change.
* However it is guaranteed that the frequency never changes with a critical
* section.
*
* @return APB clock frequency, in Hz
*/
int esp_clk_apb_freq(void);
/**
* @brief Return frequency of the main XTAL
*
* Frequency of the main XTAL can be either auto-detected or set at compile
* time (see CONFIG_ESP32_XTAL_FREQ_SEL sdkconfig option). In both cases, this
* function returns the actual value at run time.
*
* @return XTAL frequency, in Hz
*/
int esp_clk_xtal_freq(void);
/**
* @brief Read value of RTC counter, converting it to microseconds
* @attention The value returned by this function may change abruptly when
* calibration value of RTC counter is updated via esp_clk_slowclk_cal_set
* function. This should not happen unless application calls esp_clk_slowclk_cal_set.
* In ESP-IDF, esp_clk_slowclk_cal_set is only called in startup code.
*
* @return Value or RTC counter, expressed in microseconds
*/
uint64_t esp_clk_rtc_time();